Graft polymerization of acrylic monomers onto starch fractions. III. Effect of carbohydrate structure

Grafted PMMA was isolated by the acid hydrolysis method. Weight-average and number-average molecular weights were determined by gel permeation chromatography. The number-average molecular weight of the grafted chains was about 475,000 for amylopectin and 403,000 for amylose. The number of grafted chains (mmol) ranged from 2.4 × 10^?3 to 4.6 × 10^?3 for amylopectin graft copolymers and from 2.9 × 10^?3 to 6.8 × 10^?3 for those of amylose. These results were related to others obtained from ceric ion consumption studies. The values suggest that amylopectin, because of its complex structure, favors a higher consumption of ceric ion in homopolymerization reactions and inhibits the initiation reactions of the copolymerization.     

Graft polymerization of methyl methacrylate from silica initiated by peroxide groups introduced onto the surface

The surface grafting onto ultrafine silica by the radical polymerization of methyl methacrylate (MMA) initiated by peroxide groups introduced onto the surface was investigated. The introduction of peroxide groups onto the silica surface was achieved by the reaction of hydrogen peroxide with chlorosilyl groups, which were introduced by the treatment of silica with thionyl chloride. The content of diisopropylbenzene peroxide and tert-butyl peroxide groups introduced onto the silica according to the above method was determined to be 0.11 and 0.08 mmol/g, respectively. It was found that the polymerization of MMA is initiated by silica having these peroxide groups. In the polymerization, polyMMA was grafted onto silica surface: the percentage of grafting reached about 70%. Therefore, it was concluded that the polymerization of MMA is initiated by surface radicals formed by the decomposition of peroxide groups on silica and polyMMA is grafted through the propagation from the surface. During the polymerization, ungrafted polyMMA was also formed because of the formation of initiator fragments by the decomposition of peroxide groups: the grafting efficiency of the graft polymerization was 30–40%. PolyMMA-grafted silica produced a stable colloidal dispersion in organic solvents for polyMMA. © 1992 John Wiley & Sons, Inc.     

Miniemulsion polymerization of styrene with a block copolymer surfactant

A series of miniemulsion systems based on styrene/azobisisobutyronitrile in the presence of poly(methyl methacrylate‐b‐2‐(dimethylamino)ethyl methacrylate) as a surfactant and hexadecane (HD) as a cosurfactant were developed. For comparison, a series of pseudoconventional emulsions also were carried out with the same procedure used for the aforementioned series but without the cosurfactant (HD). Both the droplet size and shelf life were also measured. Experimental results indicate that it is possible to slow the effect of Ostwald ripening and thereby produce a stable miniemulsion with the block copolymer as the surfactant and HD as the cosurfactant. In addition, the extent to which varying the surfactant concentration and copolymer composition could affect both the polymer particle size during the polymerization and the polymerization rate was examined. Variation in the polymer particle sizes during polymerization indicates that droplet and aqueous (micellar or both homogeneous) nucleation occurs in the miniemulsion polymerization. With the same concentration of the surfactant used in the miniemulsion polymerization, the polymerization rates of systems with M₁₂B₃₆ are faster than those of systems with M₁₂B₁₂. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1818–1827, 2000     

Graft polymerization of vinyl monomers onto cotton fibres pretreated with amines

The influence of treating cotton fibres with several amines on the mechanical properties, moisture sorption ability before and after graft polymerization, and on graft yields for various water-soluble and water-insoluble vinyl monomers were analysed. As compared to water, the treatment with amines, ethylenediamine (EDA) in particular, resulted in a decrease in the crystallinity and tensile strength of the cotton fibres, and an increase in the moisture sorption. The graft yields of amine-treated cotton fibres using water-soluble monomers, acrylic acid (AA), methacrylic acid (MAA) and acrylamide (AM) were greater than those observed for water-treated cotton fibres, whereas the graft yields using water-insoluble monomers, methyl acrylate (MA), methyl methacrylate (MMA) and vinyl acetate (VA) were lower. The moisture sorption ability was improved by the graft polymerization with water-soluble monomers. The improvement was enhanced for MA and MAA by treatment with sodium hydroxide to form the corresponding sodium carboxylate derivatives. The tensile strength of EDA-treated cotton was slightly reduced by grafting, while that of the water-activated cotton yarn was barely changed. These results suggest that the graft polymerization of amine-treated cotton fibres with certain vinyl monomers increased the moisture sorption ability without resulting in increased fibre rigidity.     

Graft polymerization of vinyl monomers onto nanosized alumina particles

To enhance the interfacial interaction in alumina nanoparticles filled polymer composites, an effective surface modification method was developed by grafting polystyrene and polyacrylamide onto the particles. That is, the alumina surface was firstly treated with silane, followed by radical grafting polymerization in aqueous or non-aqueous systems. Results of infrared spectroscopy and dispersiveness in solvents demonstrated that the desired polymer chains have been covalently bonded to the surface of the alumina particles. They also greatly changed their surface characteristics. In addition, effects of polymerization conditions, including ways of monomer feeding, concentrations of monomer and initiator, and reaction time, on the grafting reaction were presented. It was found that the growing polymer radicals and/or the grafted polymer chains had a blocking effect on the diffusion of radicals or monomers towards the surface of nanoalumina. This was due to the fact that the interaction between the solvent and the grafted polymers was weaker than that between the grafted polymers and the nanoparticles.     

Radiation-induced graft polymerization of acrylic acid onto fluorinated polymers. II. Graft copolymer–metal complexes obtained by radiation grafting onto poly(tetrafluoroethylene-ethylene) copolymer

A study has been made on the graft copolymers obtained by radiation-induced grafting of acrylic acid onto poly(tetrafluoroethylene-ethylene) (ET) films. The conversion of the graft copolymer into metal acrylate copolymer complex was carried out by treatment with different metal salts. Such a prepared graft copolymer–metal complex was confirmed by different methods: IR, UV spectrometry, degree of coloration, and x-ray fluorescence. Some selected properties of the graft copolymer–metal complexes such as electrical conductivity, swelling behavior, and mechanical properties were investigated. The influence of metal complexes in the graft copolymers was determined and compared with the grafted films. The possibility of the practical uses for such prepared graft copolymer–metal complexes was discussed and determined. It was assumed that such materials may be of great interest in the field of semiconducting materials in addition to their applicability as cation-exchange membranes. © 1993 John Wiley & Sons, Inc.     

Distribution of functional groups grafted onto an ethylene-propylene copolymer

A theoretical model, based on the binomial (Bernoullian) distribution function, was employed for the prediction of functional group distribution in an ethylene-propylene copolymer randomly grafted by maleic anhydride. Using the experimentally determined graft level and molecular weight distribution function, the fraction of polymer molecules with given number of functional groups was calculated. The result was checked experimentally by a fluorescence method based on the excimer formation of pyrene fluorophores attached to the anhydride pendants. The time-resolved fluorescence from the pyrene-labeled copolymer yielded the fraction of polymer molecules with a single functional group. The fraction of singly labeled molecules was compared to the calculated functional group distribution and a reasonable agreement was found between the two. The distribution of grafted maleic anhydride was found to be apparently random among polymer molecules. The distribution of distances was calculated between randomly attached consecutive functional groups along the polymer backbone also. The result indicated that the distance distribution function (similar to a decaying exponential) is dominated by short distances. © 1996 John Wiley & Sons, Inc.     

Graft polymerization of polysilsesquioxane containing chloromethylphenyl groups by atom transfer radical polymerization

Polysilsesquioxane with phenyl and chloromethylphenyl groups (PCPSQ) was prepared readily from phenyltrimethoxysilane and [2‐(chloromethylphenyl)ethyl]trimethoxysilane under acidic conditions. Polymerization with chloromethylphenyl groups on PCPSQ with methyl methacrylate (MMA) was conducted in the presence of a catalytic amount of copper(I) bromide and (−)‐sparteine. Atom transfer radical polymerization yielded a graft polymer (PCPSQ‐g‐MMA) efficiently, and no gelation was observed. The process was also applied to the preparation of graft block copolymers on PCPSQ with several methacrylate monomers. An advantage of the graft hybrid polymers was shown in improved thermal behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4212–4221, 2004     

Silica nanoparticle dispersions in homopolymer versus block copolymer

Silica nanoparticles (17 ± 4 nm in diameter) were modified by grafting polystyrene chains to the surfaces using atom transfer radical polymerization (ATRP). The molecular weight of the grafted chains ranged from 8 to 48 kDa. These modified nanoparticles were mixed in solution with poly(styrene) homopolymer (18–120 kDa) and symmetric poly(styrene‐b‐butadiene) (PS‐PB) diblock copolymer (34–465 kDa) and the states of dispersion in the dried composites were characterized by transmission electron microscopy (TEM). In the so‐called wet brush limit, when the graft molecular weight equals or exceeds the matrix value, the silica particles form a uniform random dispersion in poly(styrene). Increasing the homopolymer matrix, molecular weight above the graft value results in particle clustering and macroscopic‐phase separation. Mixtures of the lamellar forming block copolymer and nanoparticles exhibit a very different trend, with particle clustering at the lower PS‐PB molecular weights and dispersion at the highest value. This latter finding is rationalized on the basis of packing constraints associated with lamellar order and the effective particle dimensions, and the degree of solvation at ordering, both of which favor higher molecular weight block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2284–2299, 2007     

Graft polymerization of acrylic monomers onto starch fractions. I. Effect of reaction time on grafting methyl methacrylate onto amylose

A study was made of the ceric-ammonium-nitrate-initiated graft polymerization of methyl methacrylate (MMA) onto a lineal fraction of starch (amylose). Grafting yields were determined by extraction with appropriate solvents: 1,2-dichloroethane for homo-PMM, and 0.5N NaOH for ungrafted amylose. Percent grafting was calculated by acid hydrolysis with 1N HCl. Molecular weights of PMMA side chains were determined by gel permeation-chromatography. Grafting efficiencies ranged from 72 to 83%, grafting, from 190 to 271%, and frequency of attachment of side chains, from 900–1250 glucose units per chain. The results observed are discussed.     

Graft polymerization of vinyl monomers onto cellulose in presence of soda lime glass. I

Sodium bisulfite–soda lime glass has proved to be a good initiator for polymerization and graft polymerization onto cellulose of some vinyl monomers. A scheme dealing with the mechanism of initiation has been proposed assuming trapping of the bisulfite radical inside the glass frame-work to form a so-called sulfur-impregnated solid. Such a solid has paramagnetic properties and acts on the vinyl monomers and cellulose as any free-radical-producing source thus leading to polymerization and graft polymerization onto cellulose. Other radicals containing sulfur, such as sulfite, sulfate, and persulfate failed to give such property with soda lime glass. With the sodium bisulfite–soda lime glass system the reactivity decreases in the order methyl methacrylate > ethyl acrylate > acrylonitrile which is inconsistent with the arrangement of acceptor monomers with decreasing electron-donating ability. This may reflect interference of the addition reaction which may take place between the monomer and bisulfite and the rate of which may depend on the activation energy of the monomer.     

Radical grafting from glass fiber surface: Graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerization of vinyl monomers from glass fiber surface initiated by alkylazo groups introduced onto the fiber surface. The introduction of azo groups onto the glass fiber surface was achieved by reaction of isocyanate groups which were previously attached onto the surface with two kinds of azo initiators, 4,4′-azobis(4-cyanopentanoic acid) (ACPA) and 2,2′-azobis(2-cyanopropanol) (ACP). The amounts of surface azo groups introduced by ACPA and ACP were both determined to be 1.3 × 10⁻⁵ mol g⁻¹ by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was found to be initiated in the presence of the glass fiber having surface azo groups. During the polymerization, part of resultant poly(MMA) grafted onto the fiber surface through propagation of the polymer from the surface radicals produced by the decomposition of the azo groups. The percentage of grafting of poly(MMA) reached 48.1% after 24 h. The graft polymerizations of other monomers, such as styrene, N-vinylcarbazole, and acrylic acid, were also initiated by the surface azo groups, and the corresponding polymer effectively grafted onto the surface. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2121–2128, 1999     

Graft polymerization of vinyl monomers onto cellulose in presence of soda lime glass. II

In the sodium bisulfite–soda lime glass initiating system, crude and true grafting yields increased with increasing ratio of methyl methacrylate to cellulose up to a limit; beyond this limiting value, grafting yields decreased due to the increase of the rate of sodium bisulfite-monomer addition over that of polymerization. Limitation was also achieved on increasing the glass to cellulose ratio through increased termination rates by coupling and disproportionation reactions, as the free radicals are increased. In addition, a limiting value was reached with increasing sodium bisulfite concentration; this may be related to the formation of a nonfunctioning disulfite ion at the expense of bisulfite radicals at high concentrations of sodium bisulfite. The temperature plays a role in this initiating system. Maximum rates of conversion and grafting were achieved at the ceiling temperature. Dissociation of the sodium bisulfite, which decreases with temperature, also has an effect.     

Synthesis of polymers with hydroxyl end groups by atom transfer radical polymerization

Polymers prepared by atom transfer radical polymerization (ATRP) contain end groups defined by the initiator used. Alkyl halides, used as initiators, lead to polymers with an alkyl group at one end and a halide as the other chain end. Using functionalized initiators such as 2‐hydroxyethyl 2‐bromopropionate, hydroxyl groups can be directly incorporated at one polymer chain end while the other end functionality remains a halogen. The direct displacement of the halogen end groups with hydroxyl groups was unsuccessful due to side reactions such as elimination (for polystyrene) or hydrolysis of ester functions (for polyacrylate). Another approach to generate hydroxyl end groups was based on the substitution of the halogen end groups by ethanolamine. This was successful for polystyrene but additional substitution at the backbone esters was observed in polyacrylates. Multiple substitution reactions could be avoided by using 4‐aminobutanol instead of 2‐aminoethanol. Hydroxyl terminated polyacrylates were also obtained by extending the polyacrylate chain end with one allyl alcohol unit in a one‐pot process by adding an excess of allyl alcohol at the end of e polymerization of acrylate.     

Interface stabilization and micelle formation in blends with a block copolymer

The phase separation behavior of ternary blends of two homopolymers, PMMA and PS, and a block copolymer of styrene and methylmethacrylate, P(S-b-MMA), was studied. The homopolymers were of equal chain length and were kept at equal amounts. Two copolymers were used with blocks of equal length, which exceeded or equaled that of the homopolymer chains. Varied was the copolymer contentf. Films were cast from toluene, which is a nonselective solvent. The morphologies of the cast films were compared with the structure of the critical fluctuations in solution, which were calculated in mean field approximation. The axis of blend compositionsf can be divided into parts of dominating macrophase and microphase separation. Above a transition concentrationf _o, all copolymer chains are found in phase interfaces. Belowf _o, part of them form micelles within the homopolymer phases.     

Grafting and patterned grafting of block copolymer nanotubes onto inorganic substrates

Chemical patterning of inorganic substrates by soft lithography has enabled various high-tech applications and cutting-edge fundamental research. In this paper, we report on methods for the grafting and patterned grafting of block copolymer nanotubes onto glass and mica surfaces. Under optimized conditions the density of such grafted nanotubes can be high, and most of the grafted tubes are in a standing position even after solvent evaporation. Surfaces modified with exotic reagents such as block copolymer nanofibers or nanotubes may find applications in biosensing, etc.     

Chemical initiation mechanism of maleic anhydride grafted onto styrene-butadiene-styrene block copolymer

The mechanism of grafting styrene-butadiene-styrene (SBS) tri-block copolymer with maleic anhydride (MAH) initiated by benzoperoxide (BPO) or 2,2^′-azo-bis-isobutyronitrile (AIBN) was studied by FTIR and ¹H NMR spectroscopies. The variation of CC (double bond) content in SBS-g-MAH was used to verify the different graft mechanisms of BPO and AIBN, indicating that the chemical initiation mechanisms of MAH grafted onto SBS of AIBN is different from that of BPO. The graft reaction occurs by addition on CC for AIBN, while by removal of an allylic hydrogen atom from SBS and by addition on CC at the same time for BPO. The graft efficiency of AIBN is higher than that of BPO in this system.     

Graft polymerization of monomers onto cellulose and lignocelluloses by chemically induced initiator

The presence of a low percentage of lignin retards and inhibits the graft polymerization reaction of some vinyl monomers on lignocellulosic substrates. The retardation or inhibition effects of lignin in situ are discussed.