Addition reactions of pendant epoxide group in poly(glycidyl methacrylate) with various active esters

Addition reactions of pendant epoxide groups in poly(glycidyl methacrylate) (PGMA) with various active esters such as 1-benzotriazolyl benzoate, S-(2-benzoxazolyl) thiobenzoate, S-(2-benzothiazolyl) thiobenzoate, 4-nitrophenyl benzoate (4NPB), and S-phenyl thiobenzoate (PTB) were carried out using quaternary salts as catalysts. The reactions of PGMA with those active esters proceeded in diglyme at 100°C for 24 h quantitatively without the formation of 2-hydroxyl pendant groups in the polymer when 10 mol % of tetraethylammonium bromide was used as a catalyst. Furthermore, it was found that the respective quaternary salts have higher catalytic activity than tertiary amines in the reaction of PGMA with the active esters, and the reaction of PGMA with 4NPB gave the corresponding polymer with the highest conversion by addition of tetrabutylammonium bromide as a catalyst, while tetraethylammonium chloride showed the highest activity for the reaction of PGMA with PTB. In addition, the rate of reaction of PGMA with 4NPB was proportional to third order kinetics of the epoxide concentration, the ester concentration and the catalyst concentration as follows: ?d[Epoxide]/dt = ?[Ester]/dt = k₃[Epoxide] [Ester] [Catalyst].     

Study of photopolymer. XVII. Synthesis of novel photosensitive polymers with pendant photosensitive group and photosensitizer groups

Novel photosensitive polymers with pendant photosensitive group, such as cinnamic ester, and photosensitizer groups, such as N-carbamoyl-p-nitroaniline and N-carbamoly-4-nitro-1-naphthylamine, were synthesized from radical copolymerizations of (2-cinnamoyloxy)ethylmethacrylate with photosensitizer monomers, such as p-nitrophenylmethacrylamide and 4-nitro-1-na-phthylmethacrylamide, by using asobisisobutyronitrile (AIBN) in benzene and from the copolymerizations of (2-hydroxy)ethylmethacrylate or (2-hydroxy)ethylacrylate with photosensitizer monomers by using AIBN in DMF. This procedure was followed by condensation reactions of the copolymers with cinnamoyl chloride with pyridine as HCL acceptor in the same reaction flask. The photoreactivities of the polymers obtained were influenced by the concentration of photosensitive group and photosensitizer groups and their ratio in the polymer matrix. In addition, the photosensitivity of cinnamic ester groups attached to a soft polymer segment was higher than that of cinnamic ester group attached to a hard polymer segment when these polymers had the same pendant N-carbamoyl-p-nitroaniline group as photosensitizer. Furthermore, the spacer length between the polymer chain and photosensitizer group was important for increasing the photoreactivity of the photosensitive group in the polymers with pendant cinnamic ester and N-carbamoyl-p-nitroaniline groups.     

Versatility of alkyne-modified poly(glycidyl methacrylate) layers for click reactions

Functional soft interfaces are of interest for a variety of technologies. We describe three methods for preparing substrates with alkyne groups, which show versatility for "click" chemistry reactions. Two of the methods have the same root: formation of thin, covalently attached, reactive interfacial layers of poly(glycidyl methacrylate) (PGMA) via spin coating onto silicon wafers followed by reactive modification with either propargylamine or 5-hexynoic acid. The amine or the carboxylic acid moieties react with the epoxy groups of PGMA, creating interfacial polymer layers decorated with alkyne groups. The third method consists of using copolymers comprising glycidyl methacrylate and propargyl methacrylate (pGP). The pGP copolymers are spin coated and covalently attached on silicon wafers. For each method, we investigate the factors that control film thickness and content of alkyne groups using ellipsometry, and study the nanophase structure of the films using neutron reflectometry. Azide-terminated polymers of methacrylic acid and 2-vinyl-4,4-dimethylazlactone synthesized via reversible addition-fragmentation chain transfer polymerization were attached to the alkyne-modified substrates using "click" chemistry, and grafting densities in the range of 0.007-0.95 chains nm(-2) were attained. The maximum density of alkyne groups attained by functionalization of PGMA with propargylamine or 5-hexynoic acid was approximately 2 alkynes nm(-3). The alkyne content obtained by the three decorating approaches was sufficiently high that it was not the limiting factor for the click reaction of azide-capped polymers.     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

Synthesis and thermal self-crosslinking reaction of polymer containing spiro ortho ester and carboxylic acid

Polymers with both pendant spiro ortho ester and carboxylic acid moieties were synthesized by partial esterification of poly(methacrylic acid), poly(methacrylic acid-co-methyl methacrylate), or poly(methacrylic acid-co-styrene) with halomethylated spiro ortho esters in the presence of 1,8-diazabicyclo[5,4,0]undecene-7 in dimethyl sulfoxide. The extent of esterification increased with increasing reaction temperature. The reaction of polymeric carboxylic acids with chloromethylated spiro ortho esters proceeded to 80% of conversion at 100°C for 120 h. In contrast, the degree of esterification with bromomethylated spiro ortho ester reached 80% at 60°C within 24 h. Thermo-crosslinking of polymers having pendant spiro ortho ester moiety and carboxylic acid could be effected in films. The rate of spiro ortho ester ring-opening increased with increasing reaction temperature and with increasing content of carboxylic acid groups in the polymer. Further, the rates of gel production were also measured. The polymer containing an equimolar mixture of spiro ortho ester moieties and carboxylic acids exhibited the highest reactivity. In addition, it was found that thermal crosslinking reaction of the polymer occurred with minimum volume shrinkage.     

Synthesis of photopolymers with pendant cyclic carbonate and cinnamic ester groups

Photopolymers with both pendant cyclic carbonate groups and cinnamic ester groups were synthesized by the addition reaction of poly(glycidyl methacryalte-co-styrene)[poly(GMA-co-AN)] with carbon dioxide and then with cinnamoyl chloride. Soluble quaternary ammonium salt catalysts showed good yield of cinnamoyl chloride addition to the glycidyl methacrylate groups. Quaternary salt catalysts of longer alkyl chain length and of more nucleophilic anion offered higher yield of cinnamoyl chloride addition. Photochemical reaction test showed that poly(CNMA-co-DOMA-co-St) had a good photosensitivity. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis of n‐alkyl methacrylate polymers with pendant carbazole moieties and their derivatives

New methacrylate monomers with carbazole moieties as pendant groups were synthesized by multistep syntheses starting from carbazoles with biphenyl substituents in the aromatic ring. The corresponding polymers were prepared using a free‐radical polymerization. The novel polymers contain N‐alkylated carbazoles mono‐ or bi‐substituted with biphenyl groups in the aromatic ring. N‐alkyl chains in polymers vary by length and structure. All new polymers were synthesized to evaluate the structural changes in terms of their effect on the energy profile, thermal, dielectric, and photophysical properties when compared to the parent polymer poly(2‐(9H‐carbazol‐9‐yl)ethyl methacrylate). According to the obtained results, these compounds may be well suited for memory resistor devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 70–76     

A novel synthesis of reactive polymers with pendant halomethyl groups by the polyaddition reaction of bis(epoxide)s with bis(chloroacetoxy)esters or bis(bromoacetoxy)esters

New reactive polymers with pendant halomethyl groups were successfully synthesized by polyaddition reactions of bis(epoxide)s with bis(chloroacetoxy)ester such as 1,4-bis [(chloroacetoxy)methyl]benzene (BCAMB) or 1,4-bis[(bromoacetoxy)methyl]benzene (BBAMB) using quaternary onium salts or crown ether complexes as catalysts. The polyaddition reaction of diglycidyl ether of bisphenol A (DGEBA) with BCAMB proceeded very smoothly with high yields (83–96%) by the addition of quaternary onium salts such as tetrabutylphosphonium bromide (TBPB) or crown ether complexes such as 18-crown-6/KBr as catalysts to produce high molecular weight polymers, although the reaction occurred without any catalyst to give low molecular weight polymer in low yield at 90°C for 48 h. It was also found that the reaction proceeded smoothly in aprotic polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) to produce high molecular weight polymers. Polyaddition reactions of DGEBA or digylcidyl ether of ethylene glycol (DGEEG) with BBAMB, other bis(chloroacetoxy)esters or bis(bromoacetoxy)esters using TBPB in DMAc also proceeded smoothly to give the corresponding polymers. The resulting poly(ether-ester)s contain reactive halomethyl groups as side chains, which were introduced during main chain formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3791–3799, 1997     

Direct synthesis of amphiphilic block copolymers from glycidyl methacrylate and poly(ethylene glycol) by cationic ring‐opening polymerization and supramolecular self‐assembly thereof

Amphiphilic block copolymers composed of a hydrophilic poly(ethylene glycol) (PEG) block and a hydrophobic poly(glycidyl methacrylate) (PGMA) block were synthesized through cationic ring‐opening polymerization with PEG as the precursor. The model reactions indicated that the reactivity of the epoxy groups was higher than that of the double bonds in the bifunctional monomer glycidyl methacrylate (GMA) under the cationic polymerization conditions. Through the control of the reaction time in the synthesis of block copolymer PEG‐b‐PGMA, a linear GMA block was obtained through the ring‐opening polymerization of epoxy groups, whereas the double bond in GMA remained unreacted. The results showed that the molecular weight of the PEG precursor had little influence on the grafting of GMA, and the PGMA blocks almost kept the same length, despite the difference of the PEG blocks. In addition, the PGMA blocks only consisted of several GMA units. The obtained amphiphilic PEG‐b‐PGMA block copolymers could form polymeric core–shell micelles by direct molecular self‐assembly in water. The crosslinking of the PGMA core of the PEG‐b‐PGMA micelles, induced by ultraviolet radiation and heat instead of crosslinking agents, greatly increased the stability of the micelles. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2038–2047, 2005     

New thermo-crosslinking reactions of polymers containing pendant epoxide groups with various polyfunctional active esters

New thermo-crosslinking reactions of poly(glycidyl methacrylate), copolymers of glycidyl methacrylate with methyl methacrylate, styrene or ethyl acrlate with various active esters such as di[S-(2-benzothiazoly)] thioadipate (BTAD), di(S-phenyl) thioadipate (PTAD), di(4-nitrophenyl) adipate (NPAD), diphenyl adipate (PAD), and di(S-phenyl) thioisophthalate (PTIP), and other polyfunctional esters were carried out in the film state using various catalysts such as quarternary ammonium or phosphonium salts, tert amines, or the crown ether 18-crown-6 = potassium salts system. Addition reactions of pendant epoxide groups in the polymer with the active esters such as NPAD and PTAD proceeded selectively to give gel compounds without other side reactions. The rates of reaction with the thioesters such as BTAD and PTAD were relatively faster than those with the phenyl esters such as PAD and NPAD at 70°C. The rates of reactions with the esters having flexible segments such as PTAD were also faster than those with the esters having rigid skeletons such as PTIP. Furthermore, it was found that the rate of reaction was affected strongly by reaction temperature, catalyst concentration, length of alkyl chain in the catalyst, kind of counterion of quarternary ammonium salts as a catalyst, content of pendant epoxide groups in the polymer, and kind of copolymer unit in the polymer, respectively.     

Highly efficient and well‐controlled ambient temperature RAFT polymerization of glycidyl methacrylate under visible light radiation

A range of well‐defined poly(glycidyl methacrylate) (PGMA) polymers and their corresponding block copolymers were synthesized via 2‐cyanoprop‐2‐yl(4‐fluoro) dithiobenzoate or CPFDB‐mediated ambient temperature reversible addition fragmentation chain transfer radical polymerization or RAFT polymerization under environmentally friendly visible light radiation (λ = 405–577 nm), using a (2,4,6‐trimethylbenzoyl) diphenylphosphine oxide photoinitiator. As comparison, CPFDB‐mediated ambient temperature RAFT polymerizations of glycidyl methacrylate (GMA) under both full‐wave radiation (λ = 254–577 nm) and long‐wave radiation (λ = 365–577 nm) were also studied in this article. The results indicated that CPFDB moieties were significantly photolyzed under either full‐wave radiation or long‐wave radiation, thus undermining the controlled behavior of these RAFT processes. Whereas this photolysis was significantly suppressed under visible light radiation, thus CPFDB functionalities exerted well control over RAFT process, leading to a remarkably living behavior up to 90% GMA monomer conversions. This strategy facilitates the facile synthesis of well‐defined PGMA polymers. More importantly, under visible light radiation, a relatively high initial molar ratio of GMA to CPFDB and TPO led to shortening initialization period of RAFT process and accelerating overall polymerization rate. These effects are remarkably in favor of the facile synthesis of well‐defined PGMA polymers and PGMA‐based copolymers with high molecular weights. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5091–5102, 2007     

Synthesis of polysulfonates containing reactive pendant chloromethyl groups by the polyaddition of bisepoxides with disulfonyl chlorides

Polysulfonates with reactive pendant chloromethyl groups were synthesized by polyadditions of bisepoxides with disulfonyl chlorides. The polyaddition of bisphenol A diglycidyl ether (BPGE) with m-benzene disulfonyl chloride (m-BDSC) occurred in anisole without any catalyst at 130°C for 24 h. However, polymer with high molecular weight was not obtained. On the other hand, the polyadditions of BPGE with m-BDSC proceeded very smoothly with high yield (81–91%) to give polymers with relatively high molecular weights in anisole at 130°C for 24 h when quaternary phosphonium salts were used as catalysts. The polyaddition was also enhanced by the addition of certain crown ether complexes. However, the catalytic activity of these compounds was less than those of quaternary phosphonium salts. Furthermore, polyadditions of certain bisepoxides with disulfonyl chlorides were also carried out to produce the corresponding polymers under the same reaction conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 249–256, 1998     

Synthesis and photochemical properties of novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups

Novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups were synthesized by the one‐pot method for the reaction of poly(methacrylic acid) with epibromohydrin; this was followed by a reaction with phenacylbromide with 1,8‐diazabicyclo‐[5.4.0]undecene‐7 as a condensation reagent. These esterification reactions proceeded smoothly and quantitatively under mild conditions. Moreover, the photochemical reactions of the resulting polymers were evaluated by UV and IR spectroscopy. The pendant phenacyl ester groups were photocleaved to give corresponding carboxyl groups, and then the produced carboxyl groups reacted with pendant epoxy groups. Furthermore, the baking process promoted a crosslinking reaction because of the addition reaction of epoxy groups with carboxyl groups after irradiation. It was also proven that the photochemical reactivity of the resulting polymers was affected by the structure of the phenacyl ester group. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 530–538, 2001     

Synthesis of polymers bearing pendant norbornadiene moieties by addition reaction of poly(glycidyl methacrylate-co-methyl methacrylate)s with 2,5-norbornadiene-2-carboxylic acids

Polymers bearing photoresponsive norbornadiene (NBD) moieties were synthesized by the addition reaction of poly(glycidyl methacrylate-co-methyl methacrylate)s containing pendant epoxide groups with 3-phenyl-2,5-norbornadiene-2-carboxylic acid (PNBC), 3-[(phenyl)carbamoyl]-2,5-norbornadiene-2-carboxylic acid 3-[(4-acetylphenyl) carbamoyl]-2,5-norbornadiene-2-carboxylic acid (APCND), and 3-[(4-methoxyphenyl)carbamoyl]-2,5-norbornadiene-2-carboxylic acid using tetrabutylammonium bromide as a catalyst in DMF. The polymers bearing pendant PNBC or APCND moieties have higher photochemical reactivity in the film state than the polymers bearing pendant PCND or MPCND moieties. Although the pendant quadricyclane (QC) group produced by the photoirradiation of the PNBC moiety in these polymers has excellent storage stability in the film state, without catalyst at room temperature, the QC group in the polymer film with the catalyst reverts gradually to the NBD moiety at room temperature. © 1993 John Wiley & Sons, Inc.     

Controlled synthesis and functionalization of PEGylated methacrylates bearing cyclic carbonate pendant groups

Homopolymer bearing cyclic carbonate (CC) group, ABA type triblock copolymers, and (AC)B(AC) type terpolymers with statistical arrangement of A and C monomers bearing side chain CC groups are reported here. Difunctional poly(ethylene glycol) macroinitiators (PEGMIs) were prepared from PEG of three different molecular weights. PEGMIs were subsequently used for the preparation of polymers bearing CC pendant groups from cyclic carbonate methacrylate (CCMA) under atom transfer radical polymerization to yield polymers with low polydispersity index. Homopolymer and ABA type triblock copolymers were obtained by polymerizing CCMA monomer and (AC)B(AC) type statistical terpolymers were obtained when methyl methacrylate was included as a comonomer. No polymer was obtained when styrene was used as comonomer. The cyclic carbonate groups were subjected to ring‐opening reaction with monoamine to yield side chain hydroxyurethane polymers with increased solubility and diamines to yield crosslinked insoluble materials. Changes in wettability characteristics were studied by following the water contact angle of the polymers before and after ring‐opening reaction involving the cyclic carbonate pendant group. The polymers which composed of electrolyte in the form of PEG and coordinating species in the form of pendant cyclic carbonate groups showed conductivity in the range of 2–5 × 10^?6 Scm^?1 at 23 °C after doping with lithium bis(trifluoromethane)sulfonimide as characterized by impedance spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1622–1632, 2010     

Novel polymeric structures via the chlorination of cis-1,4-polybutadiene in the presence of aryl nucleophiles

The addition chlorination of cis-1,4-polybutadiene in the presence of a variety of aryl nucleophiles resulted in the formation of head-to-head poly(vinyl chloride) with pendant aromatic functional groups. Chlorination in methylene chloride solution with benzoic acid gave chlorinated polymers with pendant benzoate esters. Chlorination in the presence of phenol and benzhydrol provided polymers with pendent phenyl and diphenyl methyl ethers, respectively. Acetophenone participated during chlorination to affored polymer with pendant α-chloroether groups, while benzonitrile gave a polymer with pendant imidoyl chlorides. The extent of participation of these nucleophiles was estimated from elemental analysis and NMR spectral data, and the effect of aryl substitution on density, glass transition temperature, and linear coefficient of thermal expansion was determined. © 1993 John Wiley & Sons, Inc.     

Synthesis of poly(cyanurate)s by a novel polyaddition of bis(epoxide)s with triazine dichloride

Poly(cyanurate)s (P‐1–P‐4) containing triazine groups in the main chain and pendant chloromethyl groups in the side chain were synthesized by the polyaddition of bis(epoxide)s with 2,4‐dichloro‐6‐(diphenylamino)‐s‐triazine (DPAT) using quaternary onium salts as catalysts. The polyaddition of diglycidyl ether of bisphenol‐A (DGEBA) with DPAT proceeded smoothly in chlorobenzene at 100 °C for 12 h to give P‐1 with M_n = 19,000 in a 92% yield, when tetrabutylammonium chloride (TBAC) was used as a catalyst. However, no reaction occurred without a catalyst or with triethylamine alone under the same reaction conditions. Polyadditions of other bis(epoxide)s with DPTA also proceeded smoothly using 5 mol % of TBAC as a catalyst in chlorobenzene to produce corresponding polymers (P‐2≈P‐4) in high yields under similar reaction conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4006–4012, 2000     

Macroporous polystyrene-supported quaternary ammonium salt catalysts for the addition of carbon dioxide to glycidyl methacrylate

In the present study, the synthesis of (2-oxo-1,3-dioxolan-4-yl)methyl methacrylate (DOMA) from carbon dioxide and glycidyl methacrylate (GMA) was investigated in a semi-batch reactor using macroporous polystyrene beads containing pendant quaternary ammonium salt catalysts. The catalysts were prepared by partial copolymerization of styrene (ST) and divinylbenzene (DVB) with isooctyl alcohol, and then by copolymerization with vinylbenzyl chloride (VBC). Quaternization of the pendant chloromethyl groups was carried out by using trialkylamines. The catalytic activity of the macroporous polymer was influenced by VBC and isooctyl alcohol concentration, and by the structure of trialkylamine. A kinetic study was also carried out to better understand the reaction steps. This revised version was published online in June 2006 with corrections to the Cover Date.     

Polymerization of asymmetric polyfunctional monomers. III. Ionic polymerization of acrylic and methacrylic esters of 2-allylphenol

The polymerization of acrylic and methacrylic esters of 2-allyphenol with different anionic, cationic and coordination catalysts was studied. The polymerization occurs exclusively or predominantly through (meth)acrylic C?C double bonds in all the studied cases. With anionic catalysts the allylic groups are not polymerizable and the polymers have linear structure. Polymerization with catalysts based on dialkylaluminum chloride (alone or associated with some metal salts) yields soluble or partially crosslinked polymers, depending on the reaction conditions. The crosslinking is due to the participation of allylic groups in the polymerization reactions. Copolymers of acrylic and methacrylic esters of 2-allylphenol with styrene, acrylonitrile, methyl methacrylate, N-vinylcarbazole and 1,3-pentadiene were synthesized by copolymerization in the presence of anionic catalysts and of systems based on dialkylaluminum chloride.     

Synthesis of polyesters with pendant oxetane groups by the chemoselective alternating copolymerization of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with carboxylic anhydride and its photochemical reaction

The synthesis of polyesters with pendant oxetane groups by the chemoselective alternating copolymerization of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with carboxylic anhydride and the photochemical reaction of the resulting polymer was examined. The alternating copolymerization of EGMO with phthalic anhydride proceeded chemoselectively with quaternary onium salts under appropriate reaction conditions, and the corresponding soluble polymers with pendant oxetane groups with number‐average molecular weights of 4700–7200 were obtained in 72–87% yields. Furthermore, the photochemical reaction of the resulting polymers was examined with certain photoacid generators in the film state upon UV irradiation, and it was found that the photocrosslinking reaction of the pendant oxetane groups proceeded smoothly to give the insoluble polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1952–1961, 2003