Photopolymerization reactions initiated by copper (II)–amino acid chelates: Investigation of the initiating species by flash photolysis. I

Flash photolysis of copper (II)–bis(amino acid) complexes (amino acids: glutamic acid, serine, or valine) in deaerated aqueous solution produces transient species having absorption maxima at around 350 nm. The transient species are identified as copper (II)–alkyl complexes. In the case of Cu(valine)₂ at pH > 6.5 formation of Cu(II)-alkyl complex is not observed; this is interpreted to be due to the presence of two bulky methyl groups of the coordinated valine ligand, which hinders the rearrangement. Pseudo-first-order rate constants for the decay of the transients are determined at different pH with varying concentration of amino acid ligand. The free-radical species of the complexes responsible for the initiation of the vinyl polymerization reactions are identified as Cu(I)-coordinated amino acid radicals which are formed in the primary photochemical reaction of the complex. A mechanism for the secondary reactions involving the initiating species consistent with the nature of the product formed and the pH dependence of the decay of the transients is proposed.     

Aqueous polymerization of acrylamide initiated by cerium(IV)–amino acid chelating agent redox initiators

Amino acid-type chelating agents such as nitrilotriacetic acid (NTA), nitrilotripropionic acid (NPA), iminodiacetic acid (IDA), and ethylenediamine tetraacetic acid (EDTA) were used in combination with cerium(IV) ammonium nitrate [Ce(IV)] as the redox initiators for the aqueous polymerizations of acrylamide (AM). The polymerization behaviors and polymer qualities were studied as functions of the concentrations of Ce(IV), chelating agent, AM, as well as temperature. The performances of the chelating agent redox systems varied with the natures of the chelating agents. The NTA–Ce(IV) initiator showed the most promising polymerization rate and conversion. The blank tests for the reactions of cerium and chelating agents were also conducted for finding mechanism of formation of free radicals and determining their complex formation constants (K) and disproportionation constants (k_d). The mechanism for the polymerization was proposed and the kinetic parameters were evaluated. © 1993 John Wiley & Sons, Inc.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Kinetics of polymerization of acrylic acid initiated by Mn3+–isobutyric acid redox system. II

The kinetics of redox -initiated polymerization of acrylic acid (AA) by the systerm Mn³⁺-isobutyric acid (IBA) in sulfuric acid was studied in the temperature range of 35–50°C. The overall rates of polymerization (R_p), disappearance of manganic ion (?R_m), and degree of polymerization (X _n), were measured with variation in [monomer], [Mn³⁺], [IBA], H⁺, μ, [Mn²⁺], and temperature. The polymerization is initiated by the organic free radical that develops from the Mn³⁺-isobutyric acid oxidation reaction. Two types of termination reactions, one by the metal ion (Mn³⁺) and the other by the MN³⁺-isobutyric acid complex are proposed to explain the kinetic results. The various rate parameters were evaluated an discussed.     

Metal chelates in vinyl polymerization: Bulk polymerization of acrylonitrile initiated by Cu(II)–imine complexes

This article deals with the kinetics and mechanism of acrylonitrile (AN) polymerization initiated by Cu(II)–4-anilino 3-pentene 2-one[Cu(II)ANIPO], Cu(II)–4-p-toluedeno 3-pentene 2-one [Cu(II)TPO], and Cu(II)–4-p-nitroanilino 3-pentene 2-one [Cu(II)NAPO] in bulk at 60°C. The polymerization is free radical in nature. The exponent of initiator(I) is ? 0.5. The initiation step is a complex formation between the chelate and monomer and subsequent decomposition of the intermediate complex giving rise to free radical and Cu(I). This is substantiated by ultraviolet (UV) and electron spin resonance (ESR) studies. The activation energies and kinetic and chain transfer constants have also been evaluated.     

Polymerization of acrylamide photoinitiated by tris(2,2′‐bipyridine)ruthenium(II)–amine in aqueous solution: Effect of the amine structure

The photopolymerization of acrylamide (AA) initiated by the metallic complex tris(2,2′‐bipyridine)ruthenium(II) [Ru(bpy)₃⁺²] in the presence of aliphatic and aromatic amines as co‐initiators was investigated in aqueous solution. Aromatic amines, which are good quenchers of the emission of the metal‐to‐ligand‐charge‐transfer excited state of the complex, are more effective co‐initiators than those that do not quench the luminescence of Ru(bpy)₃⁺², such as aliphatic amines and aniline. Laser‐flash photolysis experiments show the presence of the reduced form of the complex, Ru(bpy)₃⁺¹, for all the amines investigated. For aliphatic amines, the yield of Ru(bpy)₃⁺¹ increases with temperature, and on the basis of these experiments, a metal‐centered excited state is proposed as the reactive intermediate in the reaction with these amines. The decay of the transient Ru(bpy)₃⁺¹ is faster in the presence of AA. This may be understood by an electron‐transfer process from Ru(bpy)₃⁺¹ to AA, regenerating Ru(bpy)₃⁺² and producing the radical anion of AA. It is proposed that this radical anion protonates in a fast process to give the neutral AA radical, initiating in this way the polymerization chain. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4265–4273, 2001     

Dye-sensitized photopolymerization. III. Photopolymerization of methyl methacrylate initiated by acryflavin: Ascorbic acid system in aqueous solution

The dye-sensitized photopolymerization of methyl methacrylate by acryflavin–ascorbic acid system in aqueous solution has been investigated. The systems were buffered with phosphate–citrate buffer (Na₂HPO₄, citrid acid) and the effects of monomer, dye, temperature, buffer, ascorbic acid, etc. on the rate of polymerization were studied. The rate of polymerization was evaluated gravimetrically. A suitable kinetic scheme was proposed and the composite rate constants were evaluated.     

Kinetics of oxidation of manganese(II) by peroxomonosulfuric acid in aqueous acidic solution

Summary Oxidation of Mn _aq ²⁺ by HSO ₅ ^– in acetate buffer to manganese(IV) is autocatalytic, and obeys a rate expression of the general form -d[Mn^II]/dt = k₀[Mn^II] + k₁[Mn^II][MnO_x]. The first-order (k₀) and heterogenetic (k₁) rate constants show first-order dependences on [HSO ₅ ^– ] and on 1/[H⁺]. The reaction is catalyzed by the addition of the chelating ligand glycine; k₁ shows a first-order dependence on [glycine] at a fixed pH. This catalysis is ascribed to complexation, whereby the redox potential for Mn(gly) _n ^(2–n)+ is lower than that for Mn _aq ²⁺ , facilitating oxidation. The stoichiometry of the reaction is Mn²⁺: HSO ₅ ^– = 11, and the manganese(IV) oxide formed is of battery-active grade. Purity of the recovered product is not affected by the presence of high concentrations of natural sugars in the initial solution.     

X-ray K-absorption spectra and the metal-ligand bond in some amino acid copper(II) chelates

Summary X-ray K-absorption spectra of copper in copper(II) chelates involving DL -aminobutyric acid, hippuric acid and edta have been investigated with particular reference to the number, length and strength of the metal-ligand bonds. The difference in coordination numbers found from XAES and other investigations has been explained on the basis of metal-to-ligand back donation. Information on bond strength trends obtained from XAES data is supported by i.r. spectral parameters. EXAFS energy separations are used to determine, by Levy's method, the individual metal-donor as well as metal-metal bond lengths which agree with available x-ray diffraction data.     

Kinetics of oxidation of organic compounds by silver(II) in aqueous perchloric acid solution. Part 5

Summary The kinetics and mechanism of oxidation of a series of alcohols, namely cyclohexanol, cyclopentanol, pentan-2-ol and benzyl alcohol, by silver(II) perchlorate in perchloric acid solution. have been investigated by the stopped-flow technique. These oxidations proceed through two parallel pathways involving Ag²⁺ and AgOH⁺ species. In the case of benzyl alcohol, the hydroxo species, which has been found to be almost universally reactive toward different organic substrates, is inactive; this behaviour has been interpreted in terms of interaction of the oxidant with the aromatic moiety in the alcohol. The reactivities are discussed in terms of substrate reaction sites with reference to electronic availability and reaction products.     

Kinetics and mechanism of oxidation of 2‐mercaptosuccinic acid by bis(μ‐oxo)‐ manganese(III,IV)‐cyclam complex in aqueous medium: Influence of externally added copper(II)

Kinetic studies on the oxidation of 2‐mercaptosuccinic acid by dinuclear [Mn₂^III/IV(μ‐O)₂(cyclam)₂](ClO₄)₃] ( 1 ) (abbreviated as Mn^III–Mn^IV) (cyclam = 1,4,8,11‐tetraaza‐cyclotetradecane) have been carried out in aqueous medium in the pH range of 4.0–6.0, in the presence of acetate buffer at 30°C by UV–vis spectrophotometry. In the pH region, two species of complex 1 (Mn^III–Mn^IV and Mn^III–Mn^IVH, the later being μ‐O protonated form) were found to be kinetically significant. The first‐order dependence of the rate of the reactions on [Thiol] both in presence and absence of externally added copper(II) ions, first‐order dependence on [Cu²⁺] and a decrease of rate of the reactions with increase in pH have been rationalized by suitable sequence of reactions. Protonation of μ‐O bridge of 1 is evidenced by the perchloric acid catalyzed decomposition of 1 to mononuclear Mn(III) and Mn(IV) complex observed by UV–vis and EPR spectroscopy. The kinetic features have been rationalized considering Cu(RSH) as the reactive intermediate. EPR spectroscopy lends support for this. The formation of a hydrogen bonded outer‐sphere adduct between the reductant and the complex in the lower pH range prior to electron transfer reactions is most likely to occur. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 170–177 2004     

Removal of copper(II) from aqueous solution with rape stalk modified by citric acid

In this paper, rape stalk was modified with citric acid (CA) to prepare copper ion biosorbent. The modified rape stalk (MRS) was characterized by Fourier transforms infrared (FTIR), zeta potential, and thermogravimetric analysis (TGA). The effects of various parameters like initial Cu²⁺ concentration, contact time, initial pH, and temperature on adsorption capacity were studied. The adsorption capacity of MRS at 298 K was 69.84 mg/g, far higher than 18.24 mg/g for native rape stalk (NRS). The adsorption mechanism was also evaluated in terms of kinetics and thermodynamics. The adsorption equilibrium data was well described by the Langmuir isotherm model. The adsorption process followed the pseudo-second-order rate kinetics. Thermodynamic study showed spontaneous and endothermic nature of the adsorption process. The ion exchange of the adsorption mechanism was affirmed. MRS could be a potentially low-cost and green adsorbent for removal of Cu²⁺ from aqueous solution.     

Kinetics of oxidation of organic compounds by silver(II) in aqueous perchloric acid solution. IV. Aliphatic alcohols

The kinetics and mechanism of the silver(II) oxidation of methanol, ethanol, 1-propanol, 1-methyl- ethanol, 1-butanol, 2-methyl-1-propanol, 2-butanol, 2-methyl-2-propanol, D₄-methanol, and D₆-methanol have been investigated at 8.0 and 20.0°C in aqueous perchloric acid media (1.00 ≤ [HClO₄] ≤ 4.00M; μ = 4.0M). The kinetics were monitored by following the disappearance of Ag(II) with a spectrophotometric stopped-flow technique. The reactions are first order in each reactant and involve both Ag²⁺ and AgOH⁺ species. No kinetic or spectroscopic evidence for complex formation between reactants was obtained. The results are discussed with reference to electron density on the ? OH or αC-H substrate sites and to the isotopic hydrogen/deuterium rate quotients found for methanol and ethanol.     

Cyclo(L-histidyl-L-histidyl)copper(II) complexes in aqueous solution

Summary The structure of the copper(II) complex cation with HISH₂ [HISH₂ = cyclo(L-histidyl-L-histidyl)] was determined from molecular weight data and n.m.r. and c.d. spectra in aqueous solution. Two HISH₂ moieties ligate to coppervia two nitrogen atoms of the imidazole rings giving rise to two 13-membered chelate rings in solution, a situation seen previously in the crystal.     

Kinetics of complexation of nickel (II) and copper (II) with some azophenol derivatives in aqueous nonionic surfactant solution

The kinetics of formation of 11 complexes of nickel(II) and copper(II) ions with some azophenol derivatives in aqueous and micellar solution of a nonionic surfactant, Triton X-100, have been studied by a stopped-flow spectrophotometric method. Second order rate constants for the reactions were determined at 298 K and ionic strength 0.1 (NaClO₄) in aqueous solution. In the surfactant solution, the pseudo-first-order rate constants for the complexation reactions,k_obs, decreased with increasing the concentration of Triton X-100. This observation was explained by the assumption that the chelating reagents distribute between the micelle of the surfactant and bulk aqueous phase and rate-controlling reactions occur only in the bulk aqueous phase. On the basis of the relation betweenk_obs and the concentration of the surfactant, the partition constants of the reagents between micellar and aqueous phases were determined.     

Vinyl polymerization of acrylamide initiated by Thallium(III) ions in solution

Kinetics of polymerization of acrylamide initiated by Thallium(III) perchlorate was investigated in aqueous perchloric acid medium in the temperature range of 55–70°C. The rates of polymerization were measured varying the concentration of the monomer, initiator, and perchloric acid. The rate of polymerization was found to increase with increase of temperature, monomer concentration, initiator concentration, and perchloric acid concentration. The effect of additives like different solvents, surfactants, and retarders on the rate of polymerization was studied. Molecular weights of the polymer were determined by viscometry. The chain transfer constants for the monomer (C_M) and that for the solvent dioxan (C_s) were calculated to be 7.33 × 10^?3 and 6.66 × 10^?3, respectively. From the Arrhenius plot, the overall activation energy (E_a) was calculated to be 10.68 kcal/mol. The energy of initiation was calculated to be 12.36 kcal/mol. Depending on the results obtained, a suitable reaction mechanism has been suggested and a rate equation has been derived.