Synthese von diastereo- und enantio-selektiv deuterierten β,ε-, β,β-, β,γ- und γ,γ-Carotinen

Synthesis of Diastereo- and Enantioselectively Deuterated β,ε-, β,β-, β,γ- and γ,γ-Carotenes We describe the synthesis of (1′R, 6′S)-[16′, 16′, 16′-²H₃]-β, εcarotene, (1R, 1′R)-[16, 16, 16, 16′, 16′, 16′-²H₆]-β, β-carotene, (1′R, 6′S)-[16′, 16′, 16′-²H₃]-γ, γ-carotene and (1R, 1′R, 6S, 6′S)-[16, 16, 16, 16′, 16′, 16′-²H₆]-γ, γ-carotene by a multistep degradation of (4R, 5S, 10S)-[18, 18, 18-²H₃]-didehydroabietane to optically active deuterated β-, ε- and γ-C₁₁-endgroups and subsequent building up according to schemes \documentclass{article}\pagestyle{empty}\begin{document}${\rm C}_{11} \to {\rm C}_{14}^{C_{\mathop {26}\limits_ \to }} \to {\rm C}_{40} $\end{document} and C₁₁ → C₁₄; C₁₄+C₁₂+C₁₄→C₄₀. NMR.- and chiroptical data allow the identification of the geminal methyl groups in all these compounds. The optical activity of all-(E)-[²H₆]-β,β-carotene, which is solely due to the isotopically different substituent not directly attached to the chiral centres, is demonstrated by a significant CD.-effect at low temperature. Therefore, if an enzymatic cyclization of [17, 17, 17, 17′, 17′, 17′-²H₆]lycopine can be achieved, the steric course of the cyclization step would be derivable from NMR.- and CD.-spectra with very small samples of the isolated cyclic carotenes. A general scheme for the possible course of the cyclization steps is presented.     

One-Bond 13C, 13C-Spin Coupling in η4-, η3- and η2-Olefin Transition Metal Complexes

One-bond ¹³C, ¹³C-spin-coupling constants have been measured, with natural isotope abundance, in η⁴-diene, η³-allyl and η²-ene transition-metal carbonyl complexes. Typical values of ¹J(C,C) are given for Fe-, Ru- and Os-complexes with the three types of olefinic ligands. The effects of substituents and the structural significance of the C,C-coupling constants are discussed.     

Use of Ph3P=N‐Li: Synthesis of α,β‐unsaturated nitriles from α,β‐unsaturated esters via the formation of N‐(α,β‐unsaturated acyl) phosphinimines

The reaction of Ph₃P=NLi with various α,β‐unsaturated esters gives access to new N‐(α,β‐unsaturated acyl) phosphinimines, which can undergo intramolecular aza‐Wittig reactions (at 65–110°C) to afford the corresponding nitriles. The structures of all new compounds were established by elementary analyses, IR, ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 49–54, 1999     

The Crystal and Molecular Structure of 3-Oxo-17β-acetoxy-Δ4-14α-methyl-8α, 9β, 10α, 13α-estrene

The crystal and molecular structure of 3-oxo-17β-acetoxy-Δ⁴-14α-methyl-8α, 9β, 10α, 13α-estrene, C₂₁H₃₀O₃, has been determined by X-ray diffraction analysis. The crystals belong to the orthorhombic space group P2₁2₁2₁, with the cell dimensions a = 12.093 Å, b = 19.667 Å, c = 7.746 Å; Z = 4. Intensity data were collected at room temperature with an automatic four-circle diffractometer. The structure was solved by direct methods and the parameters were refined by least-squares analysis. All the hydrogen atoms were included in the refinement. The final R value was 0.038 for 1413 observed reflections. The conformation of ring A is intermediate between a half-chair and a 1, 2-diplanar form. The hydrogens at C(9) and C(10) are anti, the B/C ring junction is trans, and rings B and C adopt chair conformations. Ring D is cis fused and is halfway between C₂ and C_s forms.     

Differentiation of Boc‐protected α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptide positional isomers by electrospray ionization tandem mass spectrometry

Two new series of Boc‐N‐α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptides containing repeats of L ‐Ala‐δ⁵‐Caa/δ⁵‐Caa‐L ‐Ala and β³‐Caa‐δ⁵‐Caa/δ⁵‐Caa‐β³‐Caa (L ‐Ala = L ‐alanine, Caa = C‐linked carbo amino acid derived from D ‐xylose) have been differentiated by both positive and negative ion electrospray ionization (ESI) ion trap tandem mass spectrometry (MS/MS). MSⁿ spectra of protonated isomeric peptides produce characteristic fragmentation involving the peptide backbone, the Boc‐group, and the side chain. The dipeptide positional isomers are differentiated by the collision‐induced dissociation (CID) of the protonated peptides. The loss of 2‐methylprop‐1‐ene is more pronounced for Boc‐NH‐L ‐Ala‐δ‐Caa‐OCH₃ (1), whereas it is totally absent for its positional isomer Boc‐NH‐δ‐Caa‐L ‐Ala‐OCH₃ (7), instead it shows significant loss of t‐butanol. On the other hand, second isomeric pair shows significant loss of t‐butanol and loss of acetone for Boc‐NH‐δ‐Caa‐β‐Caa‐OCH₃ (18), whereas these are insignificant for its positional isomer Boc‐NH‐β‐Caa‐δ‐Caa‐OCH₃ (13). The tetra‐ and hexapeptide positional isomers also show significant differences in MS² and MS³ CID spectra. It is observed that ‘b’ ions are abundant when oxazolone structures are formed through five‐membered cyclic transition state and cyclization process for larger ‘b’ ions led to its insignificant abundance. However, b₁⁺ ion is formed in case of δ,α‐dipeptide that may have a six‐membered substituted piperidone ion structure. Furthermore, ESI negative ion MS/MS has also been found to be useful for differentiating these isomeric peptide acids. Thus, the results of MS/MS of pairs of di‐, tetra‐, and hexapeptide positional isomers provide peptide sequencing information and distinguish the positional isomers. Copyright © 2010 John Wiley & Sons, Ltd.     

Nuclear magnetic relaxation of α-13C nuclei of helical poly(γ-hexyl-L-glutamate) and poly(γ-benzyl-L-glutamate)

Spin-lattice relaxation times (T₁), spin-spin relaxation times (T₂), and nuclear Overhauser enhancements (NOE), at 75.5 MHz are reported for α-¹³C nuclei of poly (γ-benzyl-L -glutamate) in deuterated dimethylformamide at 60°C and of poly(γ-hexyl-L -glutamate) in cyclohexanone at 48 and 79°C. It is shown that for molecular weights above 10⁵, the polypeptides cannot be considered as essentially rigid helices with internal librational motions; additional backbone flexing motions contribute to the relaxation behavior.     

Thiocyanate-assisted demetallation of α,β,γ,δ-tetra(p-sulfophenyl)porphinatoindium(III) in aqueous media

The rate law for the demetallation of the title indium(III)-porphin complex in aqueous acidic thiocyanate media at 3.00M ionic strength was found to be of the form where [H₄P^2?] is the concentration of the diacid product formed, [InP]_t is the total concentration of all forms of indium(III)-porphin complex present, and a and b are constants. The constant a is a pseudo-third-order rate constant with the value (0.057 ± 0.005)M^?2 s^?1 and b has the value 0.704M^?2 at 50.5°C. If the mechanism for demetallation involves ringpuckering with the attachment of two H⁺ ions, then 1/b can be identified with the product K₁K₂ for the stepwise dissociation of two protons from two ring pyrrolic nitrogen atoms of H₂InP^?. In the sulfonated tetraphenylporphin used for these studies the ring pyrrolic nitrogen atoms seem to be the most probable sites for protonation. If this identification is correct, the value of 1.42 ± 0.13 found for the product K₁K₂ shows the enormous effect that the presence of the In³⁺ center has on the ionization constants of these two protons. That the kinetic studies show saturation effects with respect to proton addition to InP^3? may result from the fact that In³⁺ sits about 0.6 Å above the porphin ring.     

Synthesis of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines from β‐alkoxy‐α,β‐unsaturated trihalomethyl ketones

The synthesis of a novel series of twelve 4‐(trihalomethyl)dipyrimidin‐2‐ylamines, from the cyclo‐condensation reaction of 4‐(trichloromethyl)‐2‐guanidinopyrimidine, with β‐alkoxyvinyl trihalomethyl ketones, of general formula: X₃C‐C(O)‐C(R²)=C(R¹)‐OR, where: X = F, Cl; R = Me, Et, ‐(CH₂)₂‐, ‐(CH₂)₃‐; R¹ = H, Me; R² = H, Me, ‐(CH₂)₂‐, ‐(CH₂)₃‐, is reported. The reactions were carried out in acetonitrile under reflux for 16 hours, leading to the dipyrimidin‐2‐ylamines in 65‐90% yield. Depending on the substituents of the vinyl ketone, tetrahydropyrimidines or aromatic pyrimidine rings were obtained from the cyclization reaction. When X = Cl, elimination of the trichloromethyl group was observed during the cyclization step. The structure of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines was studied in detail by ¹H‐, ¹³C‐ and 2D‐nmr spectroscopy.     

Gerüstumlagerung eines α,β -ungesättigten γ,δ-Epoxiketons bei der Birch-Reduktion: Strukturaufklärung mittels 13C-INADEQUATE-NMR-Spektroskopie

Skeleton Rearrangement of an α-β-Unsaturated γ,δ-Epoxyketone during Birch Reduction: Structure Elucidation by Means of ¹³C-INADEQUATE-NMR Spectroscopy When the γ-epoxide 2 of β-ionone is treated under standard Birch-reduction conditions, unexpectedly a 70% combined yield of regioisomeric octalones 4 and 5 is isolated. These products unquestionably result form cleavage of the central epoxide C?C bond. The structure of compounds 4 and 5 could be determined by means of ¹³C-INADEQUATE-NMR spectroscopy.     

Synthesis of α‐Aryl Esters and Nitriles: Deaminative Coupling of α‐Aminoesters and α‐Aminoacetonitriles with Arylboronic Acids

Transition‐metal‐free synthesis of α‐aryl esters and nitriles using arylboronic acids with α‐aminoesters and α‐aminoacetonitriles, respectively, as the starting materials has been developed. The reaction represents a rare case of converting C(sp³)? N bonds into C(sp³)? C(sp²) bonds. The reaction conditions are mild, demonstrate good functional‐group tolerance, and can be scaled up.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

β‐Hairpins Generated from Hybrid Peptide Sequences Containing both α‐ and β‐Amino Acids

The incorporation of the β‐amino acid residues into specific positions in the strands and β‐turn segments of peptide hairpins is being systematically explored. The presence of an additional torsion variable about the C(α) C(β) bond (θ) enhances the conformational repertoire in β‐residues. The conformational analysis of three designed peptide hairpins composed of α/β‐hybrid segments is described: Boc‐Leu‐Val‐Val‐^DPro‐β Phe ‐Leu‐Val‐Val‐OMe ( 1 ), Boc‐Leu‐Val‐β Val ‐^DPro‐Gly‐β Leu ‐Val‐Val‐OMe ( 2 ), and Boc‐Leu‐Val‐β Phe ‐Val‐^DPro‐Gly‐Leu‐β Phe ‐Val‐Val‐OMe ( 3 ). 500‐MHz ¹H‐NMR Analysis supports a preponderance of β‐hairpin conformation in solution for all three peptides, with critical cross‐strand NOEs providing evidence for the proposed structures. The crystal structure of peptide 2 reveals a β‐hairpin conformation with two β‐residues occupying facing, non‐H‐bonded positions in antiparallel β‐strands. Notably, βVal(3) adopts a gauche conformation about the C(α) C(β) bond (θ=+65°) without disturbing cross‐strand H‐bonding. The crystal structure of 2 , together with previously published crystal structures of peptides 3 and Boc‐β Phe ‐β Phe ‐^DPro‐Gly‐β Phe ‐β Phe ‐OMe, provide an opportunity to visualize the packing of peptide sheets with local ‘polar segments' formed as a consequence of reversal peptide‐bond orientation. The available structural evidence for hairpins suggests that β‐residues can be accommodated into nucleating turn segments and into both the H‐bonding and non‐H‐bonding positions on the strands.     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

Preparation of Protected β2‐ and β3‐Homocysteine, β2‐ and β3‐Homohistidine,and β2‐Homoserine for Solid‐Phase Syntheses

The Ser, Cys, and His side chains play decisive roles in the syntheses, structures, and functions of proteins and enzymes. For our structural and biomedical investigations of β‐peptides consisting of amino acids with proteinogenic side chains, we needed to have reliable preparative access to the title compounds. The two β³‐homoamino acid derivatives were obtained by Arndt–Eistert methodology from Boc‐His(Ts)‐OH and Fmoc‐Cys(PMB)‐OH (Schemes 2–4), with the side‐chain functional groups' reactivities requiring special precautions. The β²‐homoamino acids were prepared with the help of the chiral oxazolidinone auxiliary DIOZ by diastereoselective aldol additions of suitable Ti‐enolates to formaldehyde (generated in situ from trioxane) and subsequent functional‐group manipulations. These include OH→O^tBu etherification (for β²hSer; Schemes 5 and 6), OH→STrt replacement (for β²hCys; Scheme 7), and CH₂OH→CH₂N₃→CH₂NH₂ transformations (for β²hHis; Schemes 9–11). Including protection/deprotection/re‐protection reactions, it takes up to ten steps to obtain the enantiomerically pure target compounds from commercial precursors. Unsuccessful approaches, pitfalls, and optimization procedures are also discussed. The final products and the intermediate compounds are fully characterized by retention times (t_R), melting points, optical rotations, HPLC on chiral columns, IR, ¹H‐ and ¹³C‐NMR spectroscopy, mass spectrometry, elemental analyses, and (in some cases) by X‐ray crystal‐structure analysis.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Trityl Cation-Catalyzed Hosomi-Sakurai Reaction of Allylsilane with β,γ-Unsaturated α-Ketoester to Form γ,γ-Disubstituted α-Ketoesters

(Ph₃C)[BPh(^F)₄]-catalyzed Hosomi-Sakurai allylation of allylsilanes with β,γ-unsaturated α-ketoesters has been developed to give γ,γ-disubstituted α-ketoesters in high yields with excellent chemoselectivity. Preliminary mechanistic studies suggest that trityl cation dominates the catalysis, while the silyl cation plays a minor role.     

Preparation of N-Fmoc-Protected β2- and β3-Amino Acids and their use as building blocks for the solid-phase synthesis of β-peptides

N-Fmoc-Protected (Fmoc = (9H-fluoren-9-ylmethoxy)carbonyl) β-amino acids are required for an efficient synthesis of β-oligopeptides on solid support. Enantiomerically pure Fmoc-β³-amino acids β³: side chain and NH₂ at C(3)(= C(β)) were prepared from Fmoc-protected (S)- and (R)-α-amino acids with aliphatic, aromatic, and functionalized side chains, using the standard or an optimized Arndt-Eistert reaction sequence. Fmoc-β²- Amino acids (β² side chain at C(2), NH₂ at C(3)(= C(β))) configuration bearing the side chain of Ala, Val, Leu, and Phe were synthesized via the Evans' chiral auxiliary methodology. The target β³-heptapeptides 5–8 , a β³- pentadecapeptide 9 and a β²-heptapeptide 10 were synthesized on a manual solid-phase synthesis apparatus using conventional solid-phase peptide synthesis procedures (Scheme 3). In the case of β³-peptides, two methods were used to anchor the first β-amino acid: esterification of the ortho-chlorotrityl chloride resin with the first Fmoc-β-amino acid 2 (Method I, Scheme 2) or acylation of the 4-(benzyloxy)benzyl alcohol resin (Wang resin) with the ketene intermediates from the Wolff rearrangement of amino-acid-derived diazo ketone 1 (Method II, Scheme 2). The former technique provided better results, as exemplified by the synthesis of the heptapeptides 5 and 6 (Table 2). The intermediate from the Wolff rearrangement of diazo ketones 1 was also used for sequential peptide-bond formation on solid support (synthesis of the tetrapeptides 11 and 12 ). The CD spectra of the β²- and β³-peptides 5 , 9 , and 10 show the typical pattern previously assigned to an (M) 3₁ helical secondary structure (Fig.). The most intense CD absorption was observed with the pentadecapeptide 9 (strong broad negative Cotton effect at ca. 213 nm); compared to the analogous heptapeptide 5 , this corresponds to a 2.5 fold increase in the molar ellipticity per residue!     

Reaction of Cα,O-dilithiooximes with functionalized carbonyl compounds. Part 2 . Reaction with α-chloroketones and α,β-unsaturated aldehydes and ketones

The reaction of Cα,O-Dilithiooximes 2 and α-chloroketones afforded 5-(hydroxymethyl)-Δ²-soxazolines 4 . α,β-Unsaturated aldehydes and ketones reacted with 2 to give the corresponding acyclic 1,2-addition products 5 . The latter were cyclized with phosphorus pentoxide to 5-vinyl-Δ²-isoxazolines 6 .     

Reversible α‐Hydrogen and α‐Alkyl Elimination in PC(sp3)P Pincer Complexes of Iridium

Despite significant progress in recent years, the cleavage of unstrained C(sp³)? C(sp³) bonds remains challenging. A C? C coupling and cleavage reaction in a PC(sp³)P iridium pincer complex is mechanistically studied; the reaction proceeds via the formation of a carbene intermediate and can be described as a competition between α‐hydrogen and α‐alkyl elimination; the latter process was observed experimentally and is an unusual way of C(sp³)? C(sp³) bond scission, which has previously not been studied in detail. Mechanistic details that are based upon kinetic studies, activation parameters, and DFT calculations are also discussed. A full characterization of a C? C agostic intermediate is presented.     

Trapping of Tricarbonyl(η1,η2‐homoallyl)iron and Tricarbonyl(η3‐allyl)iron Anion Intermediates with 2‐(Phenylsulfonyl)‐3‐phenyloxaziridine

The addition of reactive carbanions to (η⁴‐1,3‐diene)Fe(CO)₃ complexes at ?78 °C and 25 °C produced putative homoallyl and allyl anion complexes, respectively. Reaction of the reactive intermediates with 2‐(phenylsulfonyl)‐3‐phenyloxaziridine afforded nucleophilic substituted (η⁴‐1,3‐diene)Fe(CO)₃ complexes.