Vibrational spectra and IR dichroism of poly(tetramethyl-p-silphenylene-siloxane) and its chain structure

Raman spectra of poly(tetramethyl-p-silphenylene-siloxane) were investigated in solution with depolarization ratios and in the solid state. Polarized infrared (IR) spectra were studied on oriented polymer samples. Assignments of the vibrational bands are given and IR dichroic and Raman data are in agreement with tetragonal P4₁ space group symmetry. These data provide information on the arrangement of the Si? C₆H₄? Si groups in the unit cell. On the basis of vibrational spectra the dynamic interaction between adjacent benzene rings is negligibly small and the rings preserve their local D_2h Pseudosymmetry.     

Vibrational analysis of poly(vinylidene fluoride)

A vibrational analysis has been carried out for the two crystalline forms of poly(vinylidene fluoride) (PVF₂). The Raman spectrum of the planar form of PVF₂ is also reported. The band assignments are made on the basis of the spectral properties including the infrared dichroism and Raman intensities. A force field is derived based on a force constant refinement procedure utilizing the frequency data for both crystal forms.     

Conducting polymers. I. Electrical conductivity of poly(bis-p-phenylenediaminosulphoxide)

Poly(bis-p-phenylenediaminosulphoxide) was prepared by Michael addition of p-bis-N-sulphinylphenylenediamine with p-phenylenediamine at 150°C. Thermal and electrical behaviors of the polymer have been studied. The polymer is found to have increased conductivity possibly due to the participation of lone pairs of electrons on nitrogen and sulphur atoms with σ bond of the macrochain. Thermogravimetric analysis indicates that the polymer is fairly stable than other conducting polymers up to 200°C. The activation energy of the polymer was measured and found to be 13 kcal mol^?1.     

Internal motion in organosilicon polymers. I. Linear dimethylpolysilazane

A linear dimethylpolysilazane polymer has been prepared and its internal motion studied by the techniques of broadline nuclear magnetic resonance. Second moments and line widths are reported as a function of temperature from ?196 to 30°C. The results are compared to those for linear dimethylpolysiloxane, as well as to those for the crosslinked siloxane and silazane. The experimental low-temperature second moment of 7.25 ± 0.5 gauss² corresponds to a C₃ reorientation of methyl groups about the silicon–carbon bond. The motions occurring in the silazane are found to be the same as those in the corresponding siloxane. The transition to low second moments occurs approximately 30°C. higher in the linear silazane than in the linear siloxane. This is attributed to a somewhat greater resistance to motion in the silazane.     

Vibrational spectra and normal coordinate analysis of isotactic poly(alkyl ethylene)s. I. Modification I of poly(ethyl ethylene) and its deuterated derivatives

A new calculation of the vibrational frequencies of poly(ethy1 ethylene) based on the actual molecular geometry was performed. The calculation takes into account new experimental data such far-infrared spectra and Raman spectra of the stretched polymer, infrared spectra of poly(ethyl ethylene)-(2,2;d₂) (P-4-1-d₂) and poly(ethyl ethylene)-(3,3,4,4;d₄) (P-4-1-d₄), and Raman spectra of poly(ethyl ethylene)-(1,3,3;d₃) and poly(ethyl ethylene)-(3,3,4,4;d₄). Refinement produced a set of force constants; it is also applicable to poly(propyl ethylene).     

Vibrational analysis of molten poly(ethylene glycol)

The infrared absorption of poly(ethylene glycol) was measured in the molten state. Characteristic bands of the molten state were identified. Normal vibrations and frequency distributions were treated for various conformation models with CH₂CH₂O repeat units. The infrared absorption peaks of the molten state closely correspond to the frequency distribution peaks of the TGT conformation with gauche O? CH₂? CH₂? O groups, although infrared bands due to trans O? CH₂? CH₂? O groups are also observed. Vibrational assignments of the infrared bands and Raman lines were made on the basis of potential energy distributions.     

Organometallic polymers. I. Synthesis of ferrocene-containing poly(phosphine oxides) and poly(phosphine sulfides)

Poly(phosphine oxides) and poly(phosphine sulfides) of ferrocene were synthesized in the melt phase. The resulting ferrocene polymers, linked by phosphorus bridges, were thermally stable and infusible solids, of low molecular weight (M?_n < 4000). Phenyldichlorophosphine, phenyldichlorophosphonate, and phenylphosphonothioic dichloride were copolymerized with ferrocene in the melt phase (80–110°C.) with ZnCl₂ as a catalyst. As the polymerization temperature was raised, cleavage of cyclopentadiene rings from iron became more pronounced, and cyclopentane-bridged polymers of ferrocene were produced in competition with the ferrocene–phosphorus polymers. The cleavage-polymerization process became predominant at 140°C. The structures of poly(phosphine oxides) (and sulfides) of ferrocene were verified by infrared and nuclear magnetic resonance spectroscopy.     

Blends of organosilicon polymers with polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)

Blends of organosilicon polymers with polystyrene, PS, and poly(2,6-dimethyl-1,4-phenylene oxide), PPE, were investigated by transmission electron microscopy and differencial scanning calorimetry. Blends with poly(tetramethylsilphenylenesiloxane), PTMPS, showed a morphology characterized by globular domains dispersed in the organic matrix. An apparent homogeneous system was observed when poly(dimethylsilphenylene), PDSP, was mixed with PPE. A crystalline phase was found in samples with a higher PDSP content. The morphology of PS/PDSP blends with low PDSP content showed a dendritic phase dispersed in the PS-rich matrix. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2609–2616, 1997     

Tetrachlorobisphenol-A adipate polymers. I. Crystallization of poly(tetrachlorobisphenol-A adipate)

The properties of melt-crystallized poly(tetrachlorobisphenol-A adipate) were studied by using a differential scanning calorimeter. The dependence of melting point and the degree of crystallinity are reported as a function of the crystallization conditions. The heat of fusion is equal to 8.1 kcal/mole, while the equilibrium melting point, as determined by extrapolation, is 283°C. The polymer crystallized from the melt has a maximum degree of crystallinity of 0.53.     

Vibrational spectroscopic studies on modifications of poly(trans-alkenylene)s. I. The orthorhombic modification of poly(trans-pentenylene) and poly(trans-heptenylene)

Experimental results of vibrational spectroscopic studies on the orthorhombic modification of poly(trans-pentenylene) and poly(trans-heptenylene) are discussed on the basis of a normal coordinate analysis for an isolated chain model.     

Vibrational spectroscopic investigation of poly(p‐phenylene sulfide)

Poly(p‐phenylene sulfide) (PPS) is an important polymer of engineering interest particularly useful in the electronics and automotive industries. Normal mode analysis including phonon dispersion has been performed to understand completely the vibrational spectra of this polymer. Various characteristic features of the dispersion curves have been reported. Crossing/Repulsion between various pairs of modes at certain phase values have been explained as arising due to internal symmetry in the energy momentum space. The heat capacity is calculated as a function of temperature via density‐of‐states in the range 220–360 K. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2353–2367, 2009     

Spectroscopic analysis of poly(p-phenylene benzobisthiazole) films

Infrared spectroscopy has been used to determine the relative amount, location, and orientation of residual water and acid molecules in poly(p-phenylene benzobisthiazole) films. By analyzing the relative absorbance of reflected polarized infrared radiation from highly oriented films, the indices of refraction parallel and perpendicular to the chain axis were also obtained.     

Preparation of silicon-containing polymers. I. Polyimides from dianhydrides and organosilicon diisocyanates

New silicon-containing polyimides have been prepared by the reaction of pyromellitic dianhydride (PMDA) and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) with organosilicon diisocyanates having the following general structure: where R₁ = R₂ = ? CH₃ and ? C₆H₅. Thermal properties of these polyimides were studied were by TG, DTA, and DTG.     

Vibrational spectra and normal coordinate analysis of isotactic poly(alkyl ethylene)s II. Modification I of poly(propyl ethylene) and its deuterated derivatives

The vibrational analysis of modification I of poly(propyl ethylene), poly(propyl ethylene)-(2,2;d₂), and poly(propyl ethylene)-(1,2,2;d₃) has been performed using the valence force field derived for poly(ethyl ethylene) and the actual molecular geometry. The band assignments are based on infrared polarization and Raman data.     

pH-effects in the complex formation of polymers I. Interaction of poly(acrylic acid) with poly(acrylamide)

The effects of polymer concentration, molecular weight of poly(acrylic acid) (PAA), addition of sodium, potassium, ammonium and copper (II) chlorides on the complex formation ability of the system PAA-poly(acrylamide) (PAAM) have been studied in aqueous solutions. The critical pH values of the complexation were determined in different conditions. The complex formation ability of PAAM is compared with other non-ionic polymers. It was shown that an increase in polymers concentration, molecular weight of PAA and ionic strength favours the complexation and shifts the critical pH values to the higher pH region. An addition of CuCl₂ to the mixture of two polymers enhances the complexation drastically due to the formation of triple complexes.     

Spectroscopic investigation of cyclodextrin monomers,derivatives, polymers and azo dyes (1)

Circular dichroism (CD) and visible spectra of inclusion compounds between Methyl Orange (MO) analogues and -, -, -cyclodextrin (cdx), 2,6-dimethyl-and 2,3,6-trimethyl--cdx, water soluble -, -, -cdx polymer products were investigated. In the CD-spectroscopic investigation, the complex with -cdx epichlorohydrin condensate showed a large amplitude and splitting of the induced ^* band. Fractions of glyceryl ether of less than 2000 and polymer of more than 10000 dalton molecular mass were separated. Complexes of above two fractions and MO showed the same splitting spectral pattern. Job's plots from visible spectra showed the formation of the 11 complex and CD-data suggested the co-existence of the 21 MO-cdx complex. This splitting pattern showed the reversal of the signs when -cdx-ethyleneglycol-bis(epoxypropyl) ether was used and disappeared when larger host molecules and azo dyes were used. The splitting was explained by exciton interaction.     

Spectroscopic investigation of conjugated polymers derived from nitroanilines

For the first time, the resonance Raman spectroscopy was used to characterize polymers derived from meta- and para-nitroanilines. In order to improve the polymer structure analysis, other techniques were also used such as FTIR, UV-vis, XRD, XPS, EPR and N K-XANES. The insertion of strong electron-withdrawing groups (NO2) in polyaniline (PANI)-like backbone causes drastic changes in the lower energy charge transfer states, related to the polymer effective conjugation length. The resonance Raman data show that the NO2 moiety has a minor contribution on the CT state in poly(meta-nitroaniline), PMN, while in the poly(para-nitroaniline), PPN, the quinoid structure induced by para-substitution increases the charge density of NO2 groups, causing a more localized chromophore. The characterization of the imine nitrogen and of the protonated segments was done by XPS, N K-XANES and EPR spectroscopies and the lower polymerization degree of PPN, in comparison to PMN, is confirmed by XRD and TG data.     

Optical rotatory properties of synthetic polymers. I. Optical inversion of poly(propylene oxide)

(+)-1,2-Diethoxypropane, a model diether for the repeating unit of poly(propylene oxide), was prepared, and its behavior in solutions regarding optical rotatory dispersion and proton magnetic resonance was compared with those of the polymer. It was found that the model compound and the poly(propylene oxide) show essentially the same optical properties in solutions. By using the Brewster model of optical activity, it was concluded that the solvation of the polymer may well modify the polarizability of the optically active species to cause changes in the order of the polarizabilities of four atoms directly attached to the asymmetric carbon atom. The explanation is shown to be applicable also to some of related polymers.