Koordinativ ungesättigte Dirutheniumkomplexe: Synthese und Kristallstrukturen von [Ru2(CO)n(μ‐H)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] (n = 4; 5) und [Ru2(CO)4(μ‐CH2)(μ‐H)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)]

Coordinatively Unsaturated Diruthenium Complexes: Synthesis and X‐ray Crystal Structures of [Ru₂(CO)_n(μ‐H)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] (n = 4; 5) and [Ru₂(CO)₄(μ‐CH₂)(μ‐H)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] The reaction of [Ru₂(μ‐CO)(CO)₅(μ‐H)(μ‐P^tBu₂)(^tBu₂PH)] ( 2 ) with dppm yields the dinuclear species [Ru₂(μ‐CO)(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ) (dppm = Ph₂PCH₂PPh₂). Under thermal or photolytic conditions 3 loses very easily one carbonyl ligand and affords the corresponding electronically and coordinatively unsaturated complex [Ru₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 4 ). 4 is also obtainable by an one‐pot synthesis from [Ru₃(CO)₁₂], an excess of ^tBu₂PH and stoichiometric amounts of dppm via the formation of [Ru₂(CO)₄(μ‐H)(μ‐P^tBu₂)(^tBu₂PH)₂] ( 1 ). 4 exhibits a Ru–Ru double bond which could be confirmed by addition of methylene to the dimetallacyclopropane [Ru₂(CO)₄(μ‐CH₂)(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 5 ). The molecular structures of 3 , 4 and 5 were determined by X‐ray crystal structure analyses.     

Koordinativ ungesättigte Dieisenkomplexe: Synthese und Kristallstrukturen von [Fe2(CO)4(μ‐H)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] und [Fe2(CO)4(μ‐CH2)(μ‐H)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)]

Coordinatively Unsaturated Diiron Complexes: Synthesis and Crystal Structures of [Fe₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] and [Fe₂(CO)₄(μ‐CH₂)(μ‐H)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] [Fe₂(μ‐CO)(CO)₆(μ‐H)(μ‐P^tBu₂)] ( 1 ) reacts spontaneously with dppm (dppm = Ph₂PCH₂PPh₂) to give [Fe₂(μ‐CO)(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 2 c ). By thermolysis or photolysis, 2 c loses very easily one carbonyl ligand and yields the corresponding electronically and coordinatively unsaturated complex [Fe₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ). 3 exhibits a Fe–Fe double bond which could be confirmed by the addition of methylene to the corresponding dimetallacyclopropane [Fe₂(CO)₄(μ‐CH₂)(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 4 ). The reaction of 1 with dppe (Ph₂PC₂H₄PPh₂) affords [Fe₂(μ‐CO)(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppe)] ( 5 ). In contrast to the thermolysis of 2 c , yielding 3 , the heating of 5 in toluene leads rapidly to complete decomposition. The reaction of 1 with PPh₃ yields [Fe₂(CO)₆(H)(μ‐P^tBu₂)(PPh₃)] ( 6 a ), while with ^tBu₂PH the compound [Fe₂(μ‐CO)(CO)₅(μ‐H)(μ‐P^tBu₂)(^tBu₂PH)] ( 6 b ) is formed. The thermolysis of 6 b affords [Fe₂(CO)₅(μ‐P^tBu₂)₂] and the degradation products [Fe(CO)₃(^tBu₂PH)₂] and [Fe(CO)₄(^tBu₂PH)]. The molecular structures of 3 , 4 and 6 b were determined by X‐ray crystal structure analyses.     

Koordinativ ungesättigte Dirutheniumkomplexe: Synthese und Kristallstrukturen von [Ru2(CO)4(μ‐H)(μ‐S)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] und [Ru2(CO)4(μ‐X)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] (X = Cl,S2CH)

Coordinatively Unsaturated Diruthenium Complexes: Synthesis and X‐Ray Crystal Structures of [Ru₂(CO)₄(μ‐H)(μ‐S)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)], [Ru₂(CO)₄(μ‐X)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] (X = Cl, S₂CH) [Ru₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 1 ) reacts in benzene with elemental sulfur to the addition product [Ru₂(CO)₄(μ‐H)(μ‐S)(μ‐P^tBu₂)(μ‐dppm)] ( 2 ) (dppm = Ph₂PCH₂PPh₂). 2 is also obtained by reaction of 1 with ethylene sulfide. The reaction of 1 with carbon disulfide yields with insertion of the CS₂ into the Ru₂(μ‐H) bridge the dithioformato complex [Ru₂(CO)₄(μ‐S₂CH)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ). Furthermore, 1 reacts with [NO][BF₄] to the complex salt [Ru₂(CO)₄(μ‐NO)(μ‐H)(μ‐P^tBu₂)(μ‐dppm)][BF₄] ( 4 ), and reaction of 1 with CCl₄ or CHCl₃ affords spontaneously [Ru₂(CO)₄(μ‐Cl)(μ‐P^tBu₂)(μ‐dppm)] ( 5 ) in nearly quantitative yield. The molecular structures of 2 , 3 and 5 were confirmed by crystal structure analyses.     

Über Bildung und Reaktionen der CH2Li‐Derivate von tBu2P–P=P(CH3)tBu2 und (Me3Si)tBuP–P=P(CH3)tBu2

Formation and Reactions of the CH₂Li‐Derivatives of ^tBu₂P–P=P(CH₃)^tBu₂ and (Me₃Si)^tBuP–P=P(CH₃)^tBu₂ With ⁿBuLi, (Me₃Si)^tBuP–P=P(CH₃)^tBu₂ ( 1 ) and ^tBu₂P–P=P(CH₃)^tBu₂ ( 2 ) yield (Me₃Si)^tBuP–P=P(CH₂Li)^tBu₂ ( 3 ) and ^tBu₂P–P=P(CH₂Li)^tBu₂ ( 4 ), wich react with Me₃SiCl to give (Me₃Si)^tBuP–P=P(CH₂–SiMe₃)^tBu₂ ( 5 ) and ^tBu₂P–P=P(CH₂–SiMe₃)^tBu₂ ( 6 ), respectively. With ^tBu₂P–P(SiMe₃)–P^tBuCl ( 7 ), compound 3 forms 5 as well as the cyclic products [H₂C–P(^tBu)₂=P–P(^tBu)–P^tBu] ( 8 ) and [H₂C–P(^tBu)₂=P–P(P^tBu₂)–P(^tBu)] ( 9 ). Also 3 forms 8 with ^tBuPCl₂. The cleavage of the Me₃Si–P‐bond in 1 by means of C₂Cl₆ or N‐bromo‐succinimide yields (Cl)^tBuP–P=P(CH₃)^tBu₂ ( 10 ) or (Br)^tBuP–P=P(CH₃)^tBu₂ ( 11 ), resp. With LiP(SiMe₃)₂, 10 forms (Me₃Si)₂P–P(^tBu)–P=P(CH₃)^tBu₂ ( 12 ), and Et₂P–P(^tBu)–P=P(CH₃)^tBu₂ ( 13 ) with LiPEt₂. All compounds are characterized by ³¹P NMR Data and mass spectra; the ylide 5 and the THF adduct of 4 additionally by X‐ray structure analyses.     

Koordinativ ungesättigte Dirutheniumkomplexe: Synthese und Kristallstrukturen von [Ru2(CO)3L(μ‐η1 : η2‐C≡CPh)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] (L = CO,PnBu3)

Coordinatively Unsaturated Diruthenium Complexes: Synthesis and X‐ray Crystal Structures of [Ru₂(CO)₃L(μ‐η¹ : η²‐C≡CPh)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] (L = CO, PⁿBu₃) [Ru₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 1 ) reacts with several phosphines (L) in refluxing toluene under substitution of one carbonyl ligand and yields the compounds [Ru₂(CO)₃L(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] (L = PⁿBu₃, 2 a ; L = PCy₂H, 2 b ; L = dppm‐P, 2 c ; dppm = Ph₂PCH₂PPh₂). The reactivity of 1 as well as the activated complexes 2 a – c towards phenylethyne was studied. Thus 1 , 2 a and 2 b , respectively, react with PhC≡CH in refluxing toluene with elimination of dihydrogen to the acetylide‐bridged complexes [Ru₂(CO)₄(μ‐η¹ : η²‐C≡CPh)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ) and [Ru₂(CO)₃L(μ‐η¹ : η²‐C≡CPh)(μ‐P^tBu₂)(μ‐dppm)] ( 4 a and 4 b ). The molecular structures of 3 and 4 a were determined by crystal structure analyses.     

On the Reactivity of the Platina‐β‐diketone [Pt2{(COMe)2H}2(μ‐Cl)2] Towards Ph2PCH2CH2CH2SOxPh (x = 0, 2)

The reaction of the electronically unsaturated platina‐β‐diketone [Pt₂{(COMe)₂H}₂(μ‐Cl)₂] ( 1 ) with Ph₂PCH₂CH₂CH₂SPh ( 2 ) leads selectively to the formation of the acetyl(chlorido) platinum(II) complex (SP‐4‐3)‐[Pt(COMe)Cl(Ph₂PCH₂CH₂CH₂SPh‐κP,κS)] ( 4 ) having the γ‐phosphinofunctionalized propyl phenyl sulfide coordinated in a bidentate fashion (κP,κS). In boiling benzene complex 4 undergoes decarbonylation yielding the methyl(chlorido) platinum(II) complex (SP‐4‐3)‐[PtMeCl(Ph₂PCH₂CH₂CH₂SPh‐κP,κS)] ( 6 ). However, the reaction of 1 with the analogous γ‐diphenylphosphinofunctionalized propyl phenyl sulfone Ph₂PCH₂CH₂CH₂SO₂Ph ( 3 ) affords the acetyl(chlorido) platinum(II) complex (SP‐4‐4)‐[Pt(COMe)Cl(Ph₂PCH₂CH₂CH₂SO₂Ph‐κP)₂] ( 5 ). In boiling benzene complex 5 undergoes a CO extrusion yielding (SP‐4‐4)‐[PtMeCl(Ph₂PCH₂CH₂CH₂SO₂Ph‐κP)₂] ( 8 ) whereas in presence of 1 the formation of the carbonyl complex (SP‐4‐3)‐[PtMeCl(CO)(Ph₂PCH₂CH₂CH₂SO₂Ph‐κP)] ( 7 ) is observed. Addition of Ag[BF₄] to complex 5 leads to the formation of the cationic methyl(carbonyl) platinum(II) complex (SP‐4‐1)‐[PtMe(CO)(Ph₂PCH₂CH₂CH₂SO₂Ph‐κP)₂][BF₄] ( 9 ). All complexes were characterized by microanalysis and NMR spectroscopy (¹H, ¹³C, ³¹P) and complexes 4 and 6 additionally by single‐crystal X‐ray diffraction analyses.     

Synthesis and structures of germanium-containing tungsten carbyne complexes Ph3gec≡w(ch2but)3 and Ph3GeC≡W(CH2SiMe3)3

New germanium-containing tungsten carbyne complexes Ph₃GeC≡W(CH₂R)₃ (R = Bu^t or SiMe₃) were synthesized by the reaction of the alkoxy derivative Ph₃GeC≡W(OBu^t)₃ with alkyllithium reagents RCH₂Li. The new compounds were isolated in individual form as crystals in 95 and 90% yields, respectively, and were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy, and X-ray diffraction. X-ray diffraction study showed that the coordination environment of the W and Ge atoms in the Ph₃GeC≡ W(CH₂Bu^t)₃ and Ph₃GeC≡W(CH₂SiMe₃)₃ complexes can be described as a distorted tetrahedron. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 213—216, February, 2006.     

Bildung und Struktur des [{η2‐tBu2P–P}Pt(PHtBu2)(PPh3)]

Coordination Chemistry of P‐rich Phosphanes and Silylphosphanes. XX Formation and Structure of [{η²‐^tBu₂P–P}Pt(PH^tBu₂)(PPh₃)] [{η²‐^tBu₂P¹–P²}Pt(P³Ph₃)(P⁴Ph₃)] ( 2 ) reacts with ^tBu₂PH exchanging only the P³Ph₃ group to give [{η²‐^tBu₂P¹–P²}Pt(P³H^tBu₂)(P⁴Ph₃)] ( 1 ). The crystal stucture determination of 1 together with its ³¹P{¹H} NMR data allow for an unequivocal assignment of the coupling constants in related Pt complexes. 1 crystallizes in the triclinic space group P1 (no. 2) with a = 1030.33(15), b = 1244.46(19), c = 1604.1(3) pm, α = 86.565(17)°, β = 80.344(18)°, γ = 74.729(17)°.     

Heterodinukleare Komplexe: Synthese und Kristallstrukturen von [RuRh(μ‐CO)(CO)4(μ‐PtBu2)(tBu2PH)], [RuRh(μ‐CO)(CO)3(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] und [CoRh(CO)4(μ‐H)(μ‐PtBu2)(tBu2PH)]

Heterobinuclear Complexes: Synthesis and X‐ray Crystal Structures of [RuRh(μ‐CO)(CO)₄(μ‐P^tBu₂)(^tBu₂PH)], [RuRh(μ‐CO)(CO)₃(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)], and [CoRh(CO)₄(μ‐H)(μ‐P^tBu₂)(^tBu₂PH)] [Ru₃Rh(CO)₇(μ₃‐H)(μ‐P^tBu₂)₂(^tBu₂PH)(μ‐Cl)₂] ( 2 ) yields by cluster degradation under CO pressure as main product the heterobinuclear complex [RuRh(μ‐CO)(CO)₄(μ‐P^tBu₂)(^tBu₂PH)] ( 4 ). The compound crystallizes in the orthorhombic space group Pcab with a = 15.6802(15), b = 28.953(3), c = 11.8419(19) Å and V = 5376.2(11) ų. The reaction of 4 with dppm (Ph₂PCH₂PPh₂) in THF at room temperature affords in good yields [RuRh(μ‐CO)(CO)₃(μ‐P^tBu₂)(μ‐dppm)] ( 7 ). 7 crystallizes in the triclinic space group P 1 with a = 9.7503(19), b = 13.399(3), c = 15.823(3) Å and V = 1854.6 ų. Moreover single crystals of [CoRh(CO)₄(μ‐H)(μ‐P^tBu₂)(^tBu₂PH)] ( 9 ) could be obtained and the single‐crystal X‐ray structure analysis revealed that 9 crystallizes in the monoclinic space group P2₁/a with a = 11.611(2), b = 13.333(2), c = 18.186(3) Å and V = 2693.0(8) ų.     

Oligophosphanid‐Anionen: Synthesen und Molekülstrukturen von [K2(PMDETA)2(P4Ph4)], [K2(PMDETA)(P4tBu4)]2 und [K(PMDETA)(THF){cyclo‐(P5tBu4)}] (PMDETA = NMe(CH2CH2NMe2)2)

Oligophosphanide Anions: Syntheses and Molecular Structures of [K₂(PMDETA)₂(P₄Ph₄)], [K₂(PMDETA)(P₄tBu₄)]₂ and [K(PMDETA)(THF){cyclo‐(P₅tBu₄)}] (PMDETA = NMe(CH₂CH₂NMe₂)₂) The alkali metal tetraphosphanediides [K₂(PMDETA)₂(P₄Ph₄)] ( 1 ) and [K₂(PMDETA)(P₄tBu₄)]₂ ( 2 ) [PMDETA = NMe(CH₂CH₂NMe₂)₂] were synthesized via reaction of PhPCl₂ or tBuPCl₂ with 2.5 equiv. potassium and characterized by X‐ray crystallography and ³¹P NMR spectroscopy. As in other ion contact complexes of the type M₂(P₄R₄) (M = alkali metal) the solid‐state structures are retained in solution. While 1 could be prepared in comparatively good yield (54 %), 2 was only isolated in very modest yield and with low purity as [K(PMDETA)(THF){cyclo‐(P₅tBu₄)}] ( 3 ) was formed as a side product in this case. 3 was also characterized by X‐ray crystallography and ³¹P NMR spectroscopy.     

[Fe2(μsb‐CO)(CO)3(NO)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)]: Synthese,Kristallstruktur und Koordinationsisomerie

[Fe₂(μ_sb‐CO)(CO)₃(NO)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)]: Synthesis, X‐ray Crystal Structure and Isomerization Na[Fe₂(μ‐CO)(CO)₆(μ‐P^tBu₂)] ( 1 ) reacts with [NO][BF₄] at —60 °C in THF to the nitrosyl complex [Fe₂(CO)₆(NO)(μ‐P^tBu₂)] ( 2 ). The subsequent reaction of 2 with phosphanes (L) under mild conditions affords the complexes [Fe₂(CO)₅(NO)L(μ‐P^tBu₂)], L = PPh₃, ( 3a ); η‐dppm (dppm = Ph₂PCH₂PPh₂), ( 3b ). In this case the phosphane substitutes one carbonyl ligand at the iron tetracarbonyl fragment in 2 , which was confirmed by the X‐ray crystal structure analysis of 3a . In solution 3b loses one CO ligand very easily to give dppm as bridging ligand on the Fe‐Fe bond. The thus formed compound [Fe₂(CO)₄(NO)(μ‐P^tBu₂)(μ‐dppm)] ( 4 ) occurs in solution in different solvents and over a wide temperature range as a mixture of the two isomers [Fe₂(μ_sb‐CO)(CO)₃(NO)(μ‐P^tBu₂)(μ‐dppm)] ( 4a ) and [Fe₂(CO)₄(μ‐NO)(μ‐P^tBu₂)(μ‐dppm)] ( 4b ). 4a was unambiguously characterized by single‐crystal X‐ray structure analysis while 4b was confirmed both by NMR investigations in solution as well as by means of DFT calculations. Furthermore, the spontaneous reaction of [Fe₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 5 ) with NO at —60 °C in toluene yields a complicated mixture of products containing [Fe₂(μ‐CO)(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 6 ) as main product beside the isomers 4a and 4b occuring in very low yields.     

Evidence for the iron formyl (η5-C5H5)Fe(Ph2PCH2CH2PPh2)(CHO)

Evidence for (η⁵-C₅H₅)Fe(Ph₂PCH₂CH₂PPh₂)(CHO) as an intermediate in the reduction of [(η⁵-C₅H₅)Fe(Ph₂PCH₂CH₂PPh₂)CO]PF₆ to (η⁵-C₅H₅)Fe(CO)H(Ph₂PCH₂CH₂PPh₂) and for a metal-carbonyl hydride-formyl equilibrium is described.     

[Co(g5‐Me5C5)(g3‐tBu2PPCH–CH3)] aus [Co(g5‐Me5C5)(g2‐C2H4)2] und tBu2P–P=P(Me)tBu2

Coordination Chemistry of P‐rich Phosphanes and Silylphosphanes. XVII [1] [Co(g⁵‐Me₅C₅)(g³‐^tBu₂PPCH–CH₃)] from [Co(g⁵‐Me₅C₅)(g²‐C₂H₄)₂] and ^tBu₂P–P=P(Me)^tBu₂ [Co(η⁵‐Me₅C₅)(η³‐^tBu₂PPCH–CH₃)] 1 is formed in the reaction of [Co(η⁵‐Me₅C₅)(η²‐C₂H₄)₂] 2 with ^tBu₂P–P 4 (generated from ^tBu₂P–P=P(Me)^tBu₂ 3 ) by elimination of one C₂H₄ ligand and coupling of the phosphinophosphinidene with the second one. The structure of 1 is proven by ³¹P, ¹³C, ¹H NMR spectra and the X‐ray structure analysis. Within the ligand ^tBu₂P¹P²C¹H–CH₃ in 1 , the angle P1–P2–C1 amounts to 90°. The Co, P1, P2, C1 atoms in 1 look like a „butterfly”︁. The reaction of 2 with a mixture of ^tBu₂P–P=P(Me)^tBu₂ 3 and ^tBu–C?P 5 yields [Co(η⁵‐Me₅C₅){η⁴‐(^tBuCP)₂}] 6 and 1 . While 6 is spontaneously formed, 1 appears only after complete consumption of 5 .     

Zum Einfluß der PR3‐Liganden auf Bildung und Eigenschaften der Phosphinophosphiniden‐Komplexe [{η2‐tBu2P–P}Pt(PR3)2] und [{η2‐tBu2P1–P2}Pt(P3R3)(P4R′3)]

Coordination Chemistry of P‐rich Phosphanes and Silylphosphanes XXI The Influence of the PR₃ Ligands on Formation and Properties of the Phosphinophosphinidene Complexes [{η²‐^tBu₂P–P}Pt(PR₃)₂] and [{η²‐^tBu₂P¹–P²}Pt(P³R₃)(P⁴R′₃)] (R₃P)₂PtCl₂ and C₂H₄ yield the compounds [{η²‐C₂H₄}Pt(PR₃)₂] (PR₃ = PMe₃, PEt₃, PPhEt₂, PPh₂Et, PPh₂Me, PPh₂ⁱPr, PPh₂^tBu and P(p‐Tol)₃); which react with ^tBu₂P–P=PMe^tBu₂ to give the phosphinophosphinidene complexes [{η²‐^tBu₂P–P}Pt(PMe₃)₂], [{η²‐^tBu₂P–P}Pt(PEt₃)₂], [{η²‐^tBu₂P–P}Pt(PPhEt₂)₂], [{η²‐^tBu₂P–P}Pt(PPh₂Et)₂], [{η²‐^tBu₂P–P}Pt(PPh₂Me)₂], [{η²‐^tBu₂P–P}Pt(PPh₂ⁱPr], [{η²‐^tBu₂P–P}Pt(PPh₂^tBu)₂] and [{η²‐^tBu₂P–P}Pt(P(p‐Tol)₃)₂]. [{η²‐^tBu₂P–P}Pt(PPh₃)₂] reacts with PMe₃ and PEt₃ as well as with ^tBu₂PMe, PⁱPr₃ and P(c‐Hex)₃ by substituting one PPh₃ ligand to give [{η²‐^tBu₂P¹–P²}Pt(P³Me₃)(P⁴Ph₃)], [{η²‐^tBu₂P¹–P²}Pt(P³Ph₃)(P⁴Me₃)], [{η²‐^tBu₂P¹–P²}Pt(P³Et₃)(P⁴Ph₃)], [{η²‐^tBu₂P¹–P²}Pt(P³Me^tBu₂)(P⁴Ph₃)], [{η²‐^tBu₂P¹–P²}Pt(P³ⁱPr₃)(P⁴Ph₃)] and [{η²‐^tBu₂P¹–P²}Pt(P³(c‐Hex)₃)(P⁴Ph₃)]. With ^tBu₂PMe, [{η²‐^tBu₂P–P}Pt(P(p‐Tol)₃)₂] forms [{η²‐^tBu₂P¹–P²}Pt(P³Me^tBu₂)(P⁴(p‐Tol)₃)]. The NMR data of the compounds are given and discussed with respect to the influence of the PR₃ ligands.     

Synthetic studies for the preparation of phosphorus carbonyl rhenacycles with the selenoimidodiphosphinate ligand [N(SePPh2)2]

The synthesis of the rhenacycles [Re(CO)₃(PR₃){Ph₂P(Se)NP(Se)Ph₂-κ²Se}], PR₃ = PPh₃ (1), PMePh₂ (2), and PMe₂Ph (3) by a straightforward high yield procedure is described. Attempts at the preparation of the spiro [Re(CO)₂(Ph₂PCH₂CH₂PPh₂-κ²P){Ph₂P(Se)NP(Se)Ph₂-κ²Se}] resulted in the formation of complexes [Re₂(CO)₆{Ph₂P(Se)NP(Se)Ph₂-κ²Se}₂(μ-Ph₂PCH₂CH₂PPh₂)] (4) and [Re(CO)₃(Ph₂PCH₂CH₂PPh₂-κ²P){Ph₂P(Se)NP(Se)Ph₂-κSe}] (5). All new inorganic rhenacycles 1-5 were characterized in solution and in solid state. The X-ray diffraction analysis of [Re(CO)₃PPh₃{Ph₂P(Se)NP(Se)Ph₂-κ²Se}] showed that its MnSePNPSe ring conformation is sensitive to temperature.     

Chemie polyfunktioneller Moleküle. 101 [1]: Synthese eines Diphenylphosphin-substituierten Cyclophosphamide und Röntgenstrukturanalyse seines Oxidations-produkts

Inhaltsübersicht. Diphenylphosphin und rac-Cyclophosphamid (ClCH₂CH₂)₂NP(O)N(H)(CH₂)₃O (1) reagieren in Gegenwart von n-Butyllithium zu einem Zwischenprodukt, das mit Wasser das diphenylphosphinsubstituierte Cyclophosphamid, (Ph₂PCH₂CH₂)₂NP(O)N(H)(CH₂)₃O, (2) bildet. Metallierung von 2 mit n-BuLi am N(3)-Atom und Umsetzung mit D₂O führt zum N(3)-Deuteroderivat 2a. Mit H₂O₂ reagiert 2 zur all-Phosphinoxid Verbindung, [Ph₂P(O)CH₂CH₂]₂NP(O)N(H)(CH₂)₃O, (4), die mit 0,5 Mol Wasser auskristallisiert und von der zur Charakterisierung des H-Bückenbindungssystems eine Röntgenstrukturanalyse angefertigt wurde. Die NMR-Spektren (¹H, ¹³C, ³¹P, ¹⁴N) weisen 2–4 als dynamische Moleküle aus. Chemistry of Polyfunctional Molecules. 101. Synthesis of a Diphenylphosphinesubstituted Cyclophosphamide and the X-ray Diffraction of its Oxidation Product Diphenylphosphine and rac-cyclophosphamide, (ClCH₂CH₂)₂NP(O)N(H)(CH₂)₃O, (1) react in the presence of n-BuLi to an intermediate which hydrolyses to the diphenylphosphine substituted Cyclophosphamide, (Ph₂PCH₃CH₂)₂NP(O)N(H)(CH₂)₃O, (2). Metallation of 2 with n-BuLi at the N(3) atom, followed by treatment with D₂O yields the N(3)-deuterated derivative 2a. With H₂O₂ 2 forms the all-phosphine-oxide compound, [Ph₂P(O)CH₂CH₂]₂NP(O)N(H)(CH₂)₃O, ( 4 ), which crystallizes with 0.5 mole of water. In order to characterize the H-bridge bonding system a X-ray structure analysis of 4 was carried out. The NMR-Spectra (¹H, ¹³C, ³¹P, ¹⁴N) indicate 2–4 as dynamic molecules.     

Chemie polyfunktioneller Moleküle. 103 [1]: Chrom-, Molybdän- und Wolframtetra- sowie -tricarbonyl-Komplexe eines Diphenylphosphin-substituierten Cyclophosphamide

Inhaltsübersicht. (Ph₂PCH₂CH₂)₂N-P(O)N(H)CH₂CH₂CH₂O ( 2 ) bildet mit cis-M(CO)₄(C₇H₈) bzw. fac-M(CO)₃(CH₃CN)₃ (M = Cr, Mo, W; C₇H₈ = Norbornadien) die Chelat-komplexe cis-M(CO)₄(PPh₂CH₂CH₂)₂N-P(O)N(H)CH₂CH₂CH₂O ( 3a–c ) bzw. fac-M(CO)₃(PPh₂CH₂CH₂)₂N–P(O)N(H)CH₂CH₂CH₂O ( 4a–c ). 3a kristallisiert mit einem Mol Methanol aus, während 4a–c jeweils ein halbes Mol THF als Solvat enthalten. Alle Verbindungen wurden, soweit möglich, durch IR-, Raman-, ¹H-NMR-, ³¹P-NMR-, ¹³C-NMR- und Massenspektren charakterisiert. Chemistry of Polyfunctional Molecules. 103. Chromium, Molybdenum, and Tungsten Tetra- and Tricarbonyl Complexes of a Diphenylphosphine-substituted Cyclophosphamide Abstract. (Ph₂PCH₂CH₂)₂N–P(O)N(H)CH₂CH₂CH₂O (2) forms with cis-M(CO)₄(C₇H₈) or fac-M(CO)₃(CH₃CN)₃ (M = Cr, Mo, W; C₇H₈ = norbornadiene) the chelate complexes cis-M(CO)₄(PPh₂CH₂CH₂)₂N–P(O)N(H)CH₂CH₂CH₃O ( 3a–c ) or fac-M(CO)₃(PPh₂CH₂CH₂)₂N–P(O)N(H)CH₂CH₂CH₂O ( 4a–c ). 3a crystallizes with one mole of methanol whereas 4a–c contain 1/2 mole of THP as solvate. All compounds were, as far as possible, characterized by their IR, Raman, ¹H NMR, ³¹P NMR, ¹³C NMR, and mass spectra.     

Synthesis of bridged and linked ruthenium and osmium carbonyl clusters containing a [Au2(Ph2PCH2CH2PPh2)]2+ unit. The crystal and molecular structures of Ru5C(CO)14Au2(Ph2PCH2CH2PPh2) and {Os4H3(CO)12}2Au2(Ph2PCH2CH2PPh2)

Treatment of Au₂(Ph₂PCH₂CH₂PPh₂)Cl₂ with one equivalent of the [Ru₅C(CO)₁₄]²⁻ dianion in the presence of TlPF₆ gives Ru₅C(CO)₁₄Au₂(Ph₂PCH₂CH₂PPh₂) (1) in good yield and the [{Ru₅C(CO)₁₄}₂Au₂(Ph₂PCH₂CH₂PPh₂)]²⁻ (2) anion in low yield. Complex 2 becomes the major product if 2 equivalents of [Ru₅C(CO)₁₄]²⁻ are used. Reaction of [Au₂(Ph₂PCH₂CH₂PPh₂)Cl₂] with 3 equivalents of [H₃Os₄(CO)₁₂]⁻ anion in the presence of TlPF₆ affords {H₃Os₄(CO)₁₂}₂Au₂(Ph₂PCH₂CH₂PPh₂) (3) in reasonable yield. X-ray diffraction studies of 1 and 3 show that they contain the [Au₂(Ph₂PCH₂CH₂PPh₂)]²⁺ fragment in different coordination modes.     

Molybdenum and tungsten complexes with the heteroallyl-like Ph2P(O)C(S)NR− (R  Me,Ph) as ligand. X-ray structural analysis of Mo(CO)2(PPh3)(Ph2P(O)C(S)NPh)2 · CH2Cl2; A 4 : 3 piano-stool configuration

Ph₂P(O)C(S)N(H)R (R  Me, Ph) reacts with M(CO)₃(η⁵-C₅H₅)Cl (M  Mo, W) in the presence of Et₃N to give M(CO)₂(η⁵-C₅H₅)(Ph₂P(O)C(S)NR). The deprotonated ligand coordinates in a bidentate manner through N and S to give a four-membered ring system. M(CO)₃(PPh₃)₂Cl₂ (M  Mo, W) reacts with Ph₂P(O)C(S)N(H)R (R  Me, Ph) in the presence of Et₃N to give complexes in which the central metal atoms are seven coordinate through two ligands bonded via O and S to form five-membered ring systems, one PPh₃, and two CO groups. The complexes were characterised by elemental analyses, IR, ¹H NMR, and ³¹P NMR spectroscopy, and an X-ray structural analysis of Mo(CO)₂(PPh₃)(Ph₂P(O)C(S)NPh)₂ · CH₂Cl₂.     

Reaktionen von tBu2P?PP(Br)tBu2 mit Phosphanen. Ein Weg zu unterschiedlich substituierten Phosphinophosphiniden-Phosphoranen

Reactions of ^tBu₂P? P?P(Br)^tBu₂ with Phosphanes A Route to Variously Substituted Phosphinophosphinidene-phosphoranes ^tBu₂P? P?P(Br)^tBu₂ 1 reacts with PR₃ [R₃ = Et₃, ^tBu₃, Ph₃, (NMe₂)₃, (NEt₂)₃, (NEt₂)₂Me, Me₂SiMe₃] according to ^tBu₂P? P?P(Br)^tBu₂ + PR₃ → ^tBu₂P? P?PR₃ + ^tBu₂PBr While 1 decomposes above ?30°C yielding ^tBu₂PBr and the cyclophosphanes (^tBu₂P)₃P₃ and (^tBu₂P)₄P₄, there is no condensation to give any cyclophosphanes from the intermediately formed ^tBu₂P? P in the presence of PR₃. The chlorophosphanes ^tBu₂PCl, ^tBuPPhCl, (Et₂N)₂PCl and Ph₂PCl as well as (CF₃)₂PBr react quite analogously to the above equation yielding ^tBu₂P? P?P(Cl)^tBu₂, ^tBu₂P? P?P^tBuPhCl, ^tBu₂P? P?P(NEt₂)₂Cl and ^tBu₂P? P?P(NEt₂)₂Br.