Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Hierarchically organized micellization of thermoresponsive rod‐coil copolymers based on poly[oligo(ethylene glycol) methacrylate] and poly(ε‐caprolactone)

A series of amphiphilic triblock copolymers, poly[oligo(ethylene glycol) methacrylate]_x‐block‐poly(ε‐caprolactone)‐block‐poly[oligo(ethylene glycol) methacrylate]_x, POEGMA_Co(x), were synthesized. Formation of hydrophobic domains as cores of the micelles was studied by fluorescence spectroscopy. The critical micelle concentrations in aqueous solution were found to be in the range of circa 10^?6 M. A novel methodology by modulated temperature differential scanning calorimetry was developed to determine critical micelle temperature. A significant concentration dependence of cmt was found. Dynamic light scattering measurements showed a bidispersed size distribution. The micelles showed reversible dispersion/aggregation in response to temperature cycles with lower critical solution temperature between 75 and 85 °C. The interplay of the two hydrophobic and one thermoresponsive macromolecular chains offers the chance to more complex morphologies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of superparamagnetic and thermoresponsive hybrid nanoparticles via surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate

A reversible addition‐fragmentation chain transfer (RAFT) agent was directly anchored onto superparamagnetic Fe₃O₄ nanoparticles (SPNPs) in a simple procedure using a ligand exchange reaction of 2‐[(dodecylsulfanylcarbonylthiolsulfanyl) propionic acid] (DCPA) with oleic acid initially present on the surface of Fe₃O₄ nanoparticles. The DCPA‐modified SPNPs were then used for the surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate to fabricate structurally well‐defined hybrid SPNPs with temperature‐responsive poly[di(ethylene glycol) ethyl ether acrylate‐co‐(oligoethylene glycol) methyl ether acrylate] shell and magnetic Fe₃O₄ core. Evidence of a well‐controlled surface‐mediated RAFT polymerization was gained from a linear increase of number‐average molecular weight with overall monomer conversions and relatively narrow polydispersity indices of the copolymers grown from the SPNPs. The resultant hybrid nanoparticles exhibited superparamagnetic property with a saturation magnetization of 55.1–19.4 emu/g and showed a temperature‐responsive phenomenon as the temperature changed between 25 and 40 ^°C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3420–3428     

Equilibrium study of polymer–polymer complexation of poly(methacrylic acid) and poly(acrylic acid) with complementary polymers through cooperative hydrogen bonding

The degree of linkage, θ, defined as the ratio of the binding groups to the total of potentially interacting groups and the stability constant K of the polymer–polymer complexes in the systems poly(methacrylic acid)–poly(ethylene glycol), poly(acrylic acid)–poly(ethylene glycol), and poly-(methacrylic acid)–poly(vinyl pyrrolidone) in aqueous and aqueous alcohol media were determined as a function of temperature by potentiometric titration. It was found that θ and K are strongly dependent on chain length, temperature, and medium and that hydrophobic interaction is a significant factor in the stabilization of the complexes. The enthalpy and entropy changes and the cooperativeness parameter of the systems were calculated. A mechanism for the complexation in terms of cooperative interaction was proposed.     

Effects of thermal treatment of biaxially oriented poly(ethylene terephthalate)

Two distinguishable effects of thermal exposure of biaxially oriented poly(ethylene terephthalate) (PET) have been observed in the temperature range from room temperature to 140°C. Upon heating above the glass transition temperature T_g of the film an irreversible shrinkage of a few percent occurred with a concomitant decrease in the rate of creep. Some loss of orientation in the noncrystalline phase with an attendant slight increase in density is believed to be responsible. Since the film was anisotropic in its plane, different amounts and rates of shrinkage were observed along with differing thermal expansion coefficients in various directions relative to the primary optic axis. Upon cooling the 50% crystalline PET from above T_g to lower temperatures, reversible “physical aging” was observed. Creep rates were found to decrease with the residence time below T_g. As with purely amorphous polymers, the effects of the aging are removed by heating the specimen above T_g where the density of the amorphous phase achieves equilibrium values.     

Nickel Nanoparticles as Semiheterogeneous Catalyst for One-Pot,Three-Component Synthesis of 2-Amino-4H-pyrans and Pyran Annulated Heterocyclic Moieties

An efficient route for the synthesis of 2-amino-4H-pyrans and pyran annulated heterocyclic moieties has been reported via one-pot tandem Knoevenagel–cyclocondensation of aldehydes, malononitrile, and carbocyclic/heterocyclic 1,3-diones in the presence of stabilized nickel nanoparticles in ethylene glycol at room temperature. A wide range of aromatic aldehydes undergo the condensation readily to afford the pharmacologically important compounds in excellent yields. Bis-pyranization has been observed in the reactions of terephthaldehyde.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Thermoresponsive hyperbranched polymers via In Situ RAFT copolymerization of peg‐based monomethacrylate and dimethacrylate monomers

Here we report the preparation of PEG‐based thermoresponsive hyperbranched polymers via a facile in situ reversible addition‐fragmentation chain transfer (RAFT) copolymerization using bis(thiobenzoyl) disulphide to form 2‐cyanoprop‐2‐yl dithiobenzoate in situ. This novel one‐pot in situ RAFT approach was studied firstly using methyl methacrylate (MMA) monomer, then was used to prepare thermoresponsive hyperbranched polymers by copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, M_n = 475), poly(propylene glycol) methacrylate (PPGMA, M_n = 375) and up to 30 % of ethylene glycol dimethacrylate (EGDMA) as the branching agent. The resultant PEGMEMA‐PPGMA‐EGDMA copolymers from in situ RAFT were characterized by Gel Permeation Chromatography (GPC) and ¹H‐NMR analysis. The results confirmed the copolymers with multiple methacrylate groups and hyperbranched structure as well as RAFT functional residues. These water‐soluble copolymers with tailored compositions demonstrated tuneable lower critical solution temperature (LCST) from 22 °C to 32 °C. The phase transition temperature can be further altered by post functionalization via aminolysis of RAFT agent residues in polymer chains. Moreover, it was demonstrated by rheological studies and particle size measurements that these copolymers can form either micro‐ or macro photocrosslinked gels at suitable concentrations due to the presence of multiple methacrylate groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3751–3761     

Electrical resistivity feature of Cu–Sn–(Bi) alloy melts

The temperature dependence of electrical resistivity of Cu–Sn alloys, along with Cu–Sn–Bi alloys, has been investigated in a wide temperature range using the DC four-probe technique. Evidently abnormal changes are observed on ρ–T curves of these alloys. The result reveals that the irreversible and reversible changes on these ρ–Tcurves indicate the existence of the metastable microinhomogeneous structure and microheterogeneous structure (including some short range orders) of the Cu–Sn and Cu–Sn–Bi alloy melts, respectively. Furthermore, the addition of Bi increases the metastable microheterogeneity in the first heating process of Cu–Sn melts.     

Kinetics of the M-Intermediate in the Photocycle of Bacteriorhodopsin upon Chemical Modification with Surfactants

The spectroscopic and kinetic studies of the interaction between bacteriorhodopsin in the M-intermediate and several surfactants (cetyl trimethyl ammonium bromide, dodecyl trimethyl ammonium bromide, diethylene glycol mono-n-hexyl ether, ethylene glycol mono-n-hexyl ether, sodium 1-decanesulfonate and sodium 1-heptanesulfonate) have been investigated using steady-state UV–VIS spectrometry and time-resolved absorption techniques. The steady-state spectral results show that bR retains its trimeric state. Time-resolved observations indicate that the rate of deprotonation of the protonated Schiff base increases in the presence of the cationic surfactants, whereas insignificant changes are observed in the neutral or anionic surfactants. The rate of the reprotonation of the Schiff base in the transition M → N is accelerated in anionic and neutral surfactants, but is decelerated in the presence of the cationic surfactants. Surfactants with a longer hydrocarbon tail have a greater effect on the kinetics when compared with surfactants having shorter hydrocarbon tails. The opposite effect is observed when the hydrophilic head of the surfactants contains opposite charges. These distinct kinetics are discussed in terms of the difference in the modified surface hydrophilicity of the bR and the possible protein configurational changes upon surfactant treatments.     

Random-coil configurations of aromatic polyesters: Birefringence of poly(triethylene glycol terephthalate) networks in elongation

Hydroxyl-terminatd poly(triethylene glycol terephthalate) was crosslinked with an aromatic triisocyanate. Birefringence–stress–strain experiments, performed on the networks at 70°C, showed an anomalous increase in the modulus and a downturn in the birefringence–strain isotherms at high elongations. These results suggest that crystallinity is not responsible for the non-Gaussian behavior of the chains at high extension. The same kind of experiments were performed over the range 20–70°C. Values of the optical configuration parameter Δa of the order of 13.3 × 10^?24 cm³ with negligible temperature coefficient were found for these networks. The quantities Δa and d In Δa/dT were calculated by means of the rotational isomeric state model. Better agreement between the theoretical and experimental values of these parameters was found for poly(triethylene glycol terephthalate) than for poly(diethylene glycol terephthalate). Since the polarities of the two chains are similar, intermolecular interactions involving terephthaloyl residues may be responsible for the discrepancies observed between theory and experiment for Δa in aromatic polyesters.     

Irreversible temperature‐responsive formation of high‐strength hydrogel from an enantiomeric mixture of starburst triblock copolymers consisting of 8‐arm PEG and PLLA or PDLA

Starburst triblock copolymers consisting of 8‐arm poly(ethylene glycol) (8‐arm PEG) and biodegradable poly(L ‐lactide) (PLLA) or its enantiomer poly(D ‐lactide) (PDLA), 8‐arm PEG‐b‐PLLA‐b‐PEG ( Stri‐L ), and 8‐arm PEG‐b‐PDLA‐b‐PEG ( Stri‐D ) were synthesized. An aqueous solution of a 1:1 mixture ( Stri‐Mix ) of Stri‐L and Stri‐D assumed a sol state at room temperature, but instantaneously formed a physically crosslinked hydrogel in response to increasing temperature. The resulting hydrogel exhibited a high‐storage modulus (9.8 kPa) at 37 °C. Interestingly, once formed at the transition temperature, the hydrogel was stable even after cooling below the transition temperature. The hydrogel formation process was irreversible because of the formation of stable stereocomplexes. In aqueous solution, gradual hydrolytic erosion was observed because of degradation of the hydrogel. The combination of rapid temperature‐triggered irreversible hydrogel formation, high‐mechanical strength, and degradation behavior render this polymer mixture system suitable for use in injectable biomedical materials, for example, as a drug delivery system for bioactive reagents or a biodegradable scaffold for tissue engineering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6317–6332, 2008     

Novel synthesis of biodegradable amphiphilic linear and star block copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol)

Biodegradable, amphiphilic, diblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), triblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol)‐block‐poly(ε‐caprolactone) (PCL‐b‐PEG‐b‐PCL), and star shaped copolymers were synthesized by ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) or star poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. For the same PCL chain length, the materials obtained in the case of linear copolymers are viscous whereas in the case of star copolymer solid materials are obtained with low T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3975–3985, 2007     

Preparation and characterization of p-toluene sulfonyl ester and amino derivatives of tri- and poly(ethylene glycol)

Methods described in the literature are inadequate for the preparation of pure polyethylene glycol (PEG) tosylate. Therefore an improved method is presented. The hydroxyl groups on PEG can be quantitatively converted into the tosylate and isolated from the reaction medium free from impurities with no chain cleavage or reduction in molecular weight. 1,2-Di(N-phenyl 2-aminoethoxy) ethane, α,ω-di(N-phenyl 2-aminoethyl) poly(oxyethylene), and α,ω-di(N-phenyl, N-benzyl 2-aminoethyl) poly(oxyethylene) were prepared from the tosylates of tri- and poly(ethylene glycol)s and the corresponding primary and secondary aromatic amines.     

Water‐soluble,thermoresponsive, hyperbranched copolymers based on PEG‐methacrylates: Synthesis,characterization, and LCST behavior

A series of water‐soluble thermoresponsive hyperbranched copoly(oligoethylene glycol)s were synthesized by copolymerization of di(ethylene glycol) methacrylate (DEG‐MA) and oligo(ethylene glycol) methacrylate (OEG‐MA, M_w = 475 g/mol), with ethylene glycol dimethacrylate (EGD‐MA) used as the crosslinker, via reversible addition fragmentation chain transfer polymerization. Polymers were characterized by size exclusion chromatography and nuclear magnetic resonance analyses. According to the monomer composition, that is, the ratio of OEG‐MA: DEG‐MA: EGD‐MA, the lower critical solution temperature (LCST) could be tuned from 25 °C to 90 °C. The thermoresponsive properties of these hyperbranched copolymers were studied carefully and compared with their linear analogs. It was found that molecular architecture influences thermoresponsive behavior, with a decrease of around 5–10 °C in the LCST of the hyperbranched polymers compared with the LCST of linear chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2783–2792, 2010     

Effect of structure transition on solidification: ‘Sn–50wt%Sb’ visited

D.C. four-probe method was used to investigate the temperature dependence of electrical resistivity of Sn–50wt%Sb melt. Anomalous changes observed on resistivity–temperature curves (ρ–T) suggest that temperature induced liquid–liquid structure transition (L-LST) might occur in Sn–50wt%Sb melt at hundreds of degrees above its liquidus, and the transition is reversible after the first heating cycle. An isothermal experiment based on ρ–T curve was conducted to further probe the effect of the L-LST on solidification morphologies. Results show that the size of the primary phase decreases and that the microstructure becomes finer when solidified from the melt experienced the irreversible L-LST.     

Thermodynamics of micellization of tetradecyltrimethylammonium bromide in ethylene glycol–water binary mixtures

The aggregation behaviour of tetradecyltrimethylammonium bromide in ethylene glycol–water mixtures across a range of temperatures has been investigated by electrical conductivity measurements. The critical micelle concentration (cmc) and the degree of counterion dissociation of micelles were obtained at each temperature from plots of differential conductivity, (κ/c) _{T , P} , versus the square root of the total concentration of the surfactant. This procedure not only enables us to determine the cmc values more precisely than the conventional method, based on plots of conductivity against total concentration of surfactant, but also allows straightforward determination of the limiting molar conductance and the molar conductance of micellar species. The equilibrium model of micelle formation was applied to obtain the thermodynamics parameters of micellization. Only small differences have been observed in the standard molar Gibbs free energies of micellization over the temperature range investigated. The enthalpy of micellization was found to be negative in all cases, and it showed a strong dependence on temperature in the ethylene glycol poor solvent system. An enthalpy–entropy compensation effect was observed for all the systems, but whereas the micellization of the surfactant in the solvent system with 20 wt% ethylene glycol seems to occur under the same structural conditions as in pure water, in ethylene glycol rich mixtures the results suggest that the lower aggregation of the surfactant is due to the minor cohesive energy of the solvent system in relation to water. Received: 13 December 1998 Accepted in revised form: 25 February 1999     

Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

Viscosities of ternary mixtures 2-alkoxyethanol + sulfolane + ethylene glycols at T = 303.15 K

Viscosities of the ternary mixtures containing 2-methoxyethanol (ME) or 2-ethoxyethanol (EE), sulfolane (SULF) and ethylene glycols [ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG) and tetraethylene glycol (TETRAEG)] have been measured, at T?=?303.15?K and atmospheric pressure, over the whole composition range. From these experimental data, the deviations in viscosities (Δη ₁₂₃) were calculated. These quantities were fitted to the Cibulka polynomial equation to derive the ternary adjustable parameters and standard errors. The results are discussed on the basis of intermolecular interactions between the components of the analysed mixtures.     

Synthesis and Properties of Oval‐Shaped Iron Oxide/Ethylene Glycol Mesostructured Nanosheets

We have demonstrated a new and facile bottom‐up protocol for the effective synthesis of oval‐shaped iron oxide/ethylene glycol (FeO_x/EG) mesostructured nanosheets. Deprotonated ethylene glycol molecules are intercalated into iron oxide layers to form an interlayer distance of 10.6 Å. These materials display some peculiar magnetic properties, such as the low Morin temperature T_M and ferromagnetism below this T_M value. CdSe/ZnS nanoparticles can be loaded onto these mesostructured nanosheets to produce nanocomposites that combine both magnetic and fluorescence functions. In addition, iron oxide/propanediol (or butanediol) mesostructured materials with increased interlayer distances can also be synthesized. The developed synthetic strategy may be extended toward the creation of other ultrathin mesostructured nanosheets.     

Synthesis and characterization of thermoresponsive poly(ethylene glycol)‐based hydrogels and their magnetic nanocomposites

Temperature‐responsive hydrogels are one of the most widely studied types of stimuli‐responsive hydrogel systems. Their ability to transition between their swollen and collapsed states makes them attractive for controlled drug delivery, microfluidic devices, and biosensor applications. Recent work has shown that poly(ethylene glycol) (PEG) methacrylate polymers are temperature‐responsive and exhibit a wide range of lower critical solution temperatures based on the length of ethylene glycol units in the macromer chain. The addition of iron oxide nanoparticles into the hydrogel matrix can provide the ability to remotely heat the gels upon exposure to an alternating magnetic field (AMF). In this work, diethylene glycol (n = 2) methyl ether methacrylate and PEG (n = 4.5) methyl ether methacrylate copolymers were polymerized into hydrogels with 5 mol % PEG 600 (n = 13.6) dimethacrylate as the crosslinker along with 5 wt % iron oxide nanoparticles. Volumetric swelling studies were completed from 22 to 80 °C and confirmed the temperature‐responsive nature of the hydrogel systems. The ability of the gels to collapse in response to rapid temperature changes when exposed to an AMF was demonstrated showing their potential use in biomedical applications such as controlled drug delivery and hyperthermia therapy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3229–3235, 2010