Carbazole-substituted dehydroalanine main chain polymers. Synthesis and characterization of poly[methyl 2-(9-carbazolyl) acetylaminopropenoate] and poly[2-(9-carbazolyl) acetylaminopropenoic acid]

The preparation and radical-initiated polymerization of a carbazole-substituted N-acylated dehydroalanine, namely, 2-(9-carbazolyl)acetylaminopropenoic acid ( 7 ) and its methyl ester ( 6 ) is reported. The monomers 6 and 7 were prepared by dehydrochlorination of N-acylated β-chloroalanine derivatives. The monomer model compounds for the two polymers, namely, 2-(9-carbazolyl)acetylamino-2-methylpropanoic acid ( 11 ) and its methyl ester ( 10 ), were also prepared. The polymers and their monomer model compounds were characterized by elemental analysis, IR and ¹H-NMR spectra. The polymers 12 and 13 of different molecular weights could be obtained by changing the monomer-to-initiator ratios used in polymerization experiments.     

Exactly alternating silarylene-siloxane polymers. III. Structure-property relationships for polymers containing p-phenylene and p,p′-diphenyl ether silarylene units

A series of 12 different exactly alternating silarylene-siloxane polymers was prepared by low temperature condensation polymerization of arylenedisilanol with bisureidosilane monomers. The structural characterization of the polymers was carried out by ¹H NMR spectroscopy, ¹³C NMR spectroscopy, infrared (IR) spectrometry, gel permeation chromatography (GPC). dilute solution viscometry, and differential scanning calorimetry (DSC). Homopolymers and copolymers that contained either or both p-phenylene and p,p′-diphenyl ether units in the silarylene group and dimethyl or methylvinyl units in the siloxane group were prepared in high molecular weights.     

Preparation of poly(phenylene vinylene) from cycloalkylene sulfonium salt monomers and polymers

Two new types of p-xylene bis-sulfonium chloride monomers were prepared from cycloalkylene sulfides. The polymerization characteristics of these monomers to form poly(p-xylene sulfonium chlorides), and the thermal elimination reactions of their polymers to poly(p-phenylene vinylene), were compared with those of two monomers prepared from dialkyl sulfides. The cycloalkylene sulfonium chloride monomer polymerized to higher yields and to higher molecular weight polymers, which showed more efficient elimination reactions.     

Self-regulating polycondensations: Ordered aromatic polyamide-esters

The polycondensation of aminophenols with diacid chlorides was examined to determine if the amide-ester polymers obtained are random or ordered. All of the evidence obtained points to the conclusion that ordered copolymers indeed are prepared and that a “self-regulating” polymerization process is operating by virtue of the considerably greater reactivity of aromatic amino groups relative to phenol groups. The first step of the reaction involves the in situ preparation of a diphenol-amide which undergoes further condensation. The diphenol-amide intermediate may be isolated or reacted in situ. In addition to the ordered polymer from a given aminophenol and a single diacid chloride, ordered copolymers from two different diacid chlorides were prepared in which the diacid moieties appear in an alternating fashion; the structure of such polymers depends on the order of addition of the diacid chlorides. Corresponding polymers also may be prepared from the preformed diphenol-amide monomers. The molecular weights of certain of the polymers were sufficient for the preparation of films which could be hot-stretched severalfold. Interfacial polycondensations gave polymers of higher inherent viscosities than did solution polymerizations when aminophenols or diphenol-amide monomers were condensed with diacid chlorides.     

Synthesis and kinetics of polymerization of unsaturated monomers with OH groups in their structure. II. 3-hydroxyneopentyl methacrylate

The synthesis of unsaturated monomers containing one or more hydroxyl groups by reaction between polyalcohols (number of OH, n≥2) and monoacid chlorides has been theoretically analyzed. The difficulties were shown involved in the preparation of these monomers with a high degree of purity even in the most favorable case of the completely substituted compound. The calculated mole fractions of the two monomers that can be obtained by reaction between neopentylglycol and methacryloyl chloride were compared with the experimental ones. Kinetic experiments of the polymerization of 3-hydroxyneopentyl methacrylate and 2-hydroxyethyl methacrylate were carried out at different temperatures in 1,4-dioxane for the former monomer and dioxane and absolute ethanol for the latter. Dilatometric techniques and nonlinear least-squares methods were used to obtain kinetic data and to determine the kinetic constants, respectively. In homogeneous solution the values of k_p/k^1/2_t for the 3-hydroxyneopentyl methacrylate and 2-hydroxyethyl methacrylate was determined by ¹³C-NMR spectroscopy and the molar fractions of tactic triads and dyads were calculated from different resonance signals. The polymers are predominantly syndiotactic and follow a Bernoullian distribution of tactic sequences. Finally, the glass transition temperatures of both polymers, determined calorimetrically, were 145 and 89°C, respectively. © 1995 John Wiley & Sons, Inc.     

Poly(DCAQI): Synthesis and characterization of a new redox‐active polymer

Redox‐active anthraquinone based polymers are synthesized by the introduction of a polymerizable vinyl and ethynyl group, respectively, resulting in redox‐active monomers, which electrochemical behaviors are tailored by the modification of the keto groups to N‐cyanoimine moieties. These monomers can be polymerized by free radical polymerization and Rh‐catalyzed polymerization methods, respectively. The resulting polymers are obtained in molar masses (M_n) of 4,400 to 16,800 g mol^?1 as well as high yields of up to 97%. The monomers and polymers are furthermore electrochemically characterized by cyclic voltammetry. The monomers exhibit two one‐electron redox reactions at about ?0.6 and ?1.0 V versus Fc⁺/Fc. The N‐cyanoimine units are, however, partially hydrolyzed during the polymerization step or during the electrochemical measurements and degenerate to carbonyl groups, resulting in a new reduction signal at ?1.26 V versus Fc⁺/Fc. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1998–2003     

Syntheses of vinyl polymers containing a large π-electron cloud in the side chain

Several novel vinyl polymers containing five fused benzene rings in side chains were synthesized either by polymerization of the appropriate vinyl monomers or by chemical modification of the appropriate polymer. Thus, 3-(α-acryloyloxy)ethylperylene was prepared from perylene by Friedel-Crafts acylation with acetyl chloride and subsequent hydrogenation, followed by the reaction of the resulting alcohol with acryloyl chloride. 3-Acrylamido- or methacrylaminoperylene was prepared by the nitration of perylene, reduction of the resulting 3-nitroperylene, and the reaction with acryloyl or methacryloyl chloride. p-Vinylbenzal-3-acetylperylene was prepared by the condensation and dehydration reaction between p-vinylbenzaldehyde and 3-acetylperylene under alkaline medium, and, in the same manner, p-vinylbenzal-3-aminoperylene was prepared from p-vinyl benzaldehyde and 3-aminoperylene. All these monomers were polymerized with α,α′-azobisisobutyronitrile as catalyst in solution to afford the corresponding vinyl polymers. A vinyl polymer containing perylene-3-acetyl side chain was also prepared by the acetalization of poly(vinyl alcohol) with 3-formylperylene.     

Polymerization of allyl(vinyl phenyl) ethers and reactions of the resulting polymers

Solution polymerizations of allyl(o-vinyl phenyl)ether and allyl(p-vinyl phenyl)ether with cationic and radical initiators were investigated. Soluble polymers were formed in polymerizations with boron trifluoride etherate and with benzoyl peroxide. In polymerization with azobisisobutyronitrile the polymerization in dilute solution gave a soluble polymer, whereas that in concentrated solution gave a crosslinked, insoluble one. For informationon the polymerization behavior some infrared and ultraviolet spectroscopic investigations of the soluble polymers were made. From these results it appears that polymers with pendant allyl groups are formed in polymerization with boron trifluoride etherate at low temperature, and polymers containing pendant vinyl groups and allyl groups are obtained with the two types of radical initiator. Copolymerizations of these monomers with ethyl vinyl ether and styrene with the use of boron trifluoride etherate were sucessfully effected. Such reactions as Claisen rearrangement, crosslinking induced with radical initiators, and epoxidation with perbenzoic acid were examined for the polymers prepared in the polymerization with boron trifluoride etherate. Good results were obtained for the former two reactions. However, the latter was unsuccessful.     

Poly(ionic liquid)s derived from 3‐octyl‐1‐vinylimidazolium bromide and N‐isopropylacrylamide with tunable properties

A new series of linear and crosslinked copolymers, obtained from 3‐octyl‐1‐vinylimidazolium bromide (VImBr) and N‐isopropylacrylamide (NIPAAm), were prepared by radical polymerization. Namely, VImBr was synthesized from 1‐bromooctane and an ionic liquid such as 1‐vinylimidazole. NIPAAm was used because it gives raise to well known thermoresponsive (co‐)polymers. The copolymers were thoroughly characterized by means of ¹H NMR and ¹³C NMR spectroscopies. Besides, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy were also used. Moreover, the swelling behavior and the thermoresponsive properties of the corresponding hydrogels were studied. It was found that the VImBr incorporation into the copolymers does have a dramatic influence on both the thermal properties of the dried materials and the lower critical solution temperature of the corresponding hydrogels. In detail, the glass transition temperature was dependent on the monomer ratios, and ranged from 5 to 155 °C. Analogously, the lower critical solution temperature of the resulting hydrogels ranged from less than 10 up to 38 °C, thus including the physiological temperature. NMR spectroscopies, which were performed on the linear polymers, indicated that the monomers exhibit an alternating tendency resulting in a microstructure in which blocks are not present, at least when the two monomers are in equimolar amounts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3521–3532     

Synthesis of N-substituted polyethylenimines with polarizable side chain pendent groups

Two new N-substituted polyethylenimines containing carbazole and acridone groups on the side chains were prepared. The polymers were obtained by cationic ring opening polymerization of the corresponding 2-oxazoline monomers. The carbazole containing oxazoline was low melting and could be polymerized in bulk; however the acridone containing monomer had a high melting point and solution polymerization had to be used. This paper describes the synthetic procedures used to obtain these polymers.     

Preparation of hole transporting polymers by condensation polymerization of triphenylamine derivatives

Hole transporting polymers were prepared by condensation polymerization of triphenylamine and N,N,N',N'‐tetraphenylbenzidine (TPD) having alkyl group with aldehydes in the presence of p‐toluenesulfonic acid. The obtained polymers had molecular weight higher than 10,000 and good film formation ability. It was found that the aromatic amine monomers were connected with aldehyde monomer at the p‐position of the phenyl group. TPD‐aldehyde polymers had almost the same UV absorption and redox potentials as those of TPD monomer indicating that the electronic structure of amine unit did not change by the polymerization. The hole transporting mobility was in the range of 10⁻³‐10⁻⁶cm²/Vs. The electroluminescent device consisting of ITO/TPD polymer/Alq/Mg‐Ag had a maximum luminance of 9000 cd/m².     

Cyclodextrins in polymer synthesis: free radical polymerization of cyclodextrin host‐guest complexes of methyl methacrylate or styrene from homogenous aqueous solution

The polymerization of methylated β‐cyclodextrin (m‐β‐CD) 1 : 1 host‐guest compounds of methyl methacrylate (MMA) ( 1 ) or styrene ( 2 ) is described. The polymerization of complexes 1 a and 2 a was carried out in water with potassium peroxodisulfate (K₂S₂O₈)/sodium hydrogensulfite (NaHSO₃) as radical redox initiator at 60°C. Unthreading of m‐β‐CD during the polymerization led to water‐insoluble poly(methyl methacrylate) (PMMA) ( 3 ) and polystyrene ( 4 ). By comparison, analogously prepared polymers from uncomplexed monomers 1 and 2 in ethanol as organic solvent with 2,2′‐azoisobutyronitrile (AIBN) as radical initiator showed significantly lower molecular weights and were obtained in lower yields in all cases. Polymerization of m‐β‐CD complexed MMA in water, initiated with 2,2′‐azobis(N,N ′‐dimethyleneisobutyroamidine) dihydrochloride, occurred much faster than the polymerization of uncomplexed MMA in methanol under similar conditions. Furthermore, it was shown, that the precipitation polymerization of complexed MMA from homogeneous aqueous solution can be described by equations (P_n^–1 ∝ lsqb;Irsqb;^0.5) similar to those for classical polymerization in solution.     

Discriminating Influence of α‐ and Methylated β‐Cyclodextrins on Complexation and Polymerization of Diacrylate and Dimethacrylate Monomers

Summary: Host‐guest complexes of α‐cyclodextrin (α‐CD) and methylated β‐cyclodextrin (Me‐β‐CD) with diacrylates and dimethacrylates of butan‐1,4‐diol and hexan‐1,6‐diol at varying stoichiometries were studied. The complexes were analyzed by means of ¹H NMR, two‐dimensional ROESY spectroscopy and Job's curves, which clearly revealed the discriminating influence of the two hosts towards complex formation. The corresponding polymers were obtained using a redox initiator system in water. Thermal analysis and IR measurements of the polymers provided evidence for the existence of a polyrotaxane architecture.

Proposed structure of the cross‐linked polymers obtained by the redox polymerization of the Me‐β‐CD complexed monomers.     

Polymerization of novel trifluorovinyl ethers: Insight into the mechanisms of termination and chain transfer

New trifluorovinyl ether polymers were synthesized with the view toward overcoming the high chemical and thermal stabilities commonly associated with fluoropolymers. Trifluorovinyl ether copolymers, with fluorinated pendant groups, have previously been prepared to overcome limitations in processibility. To further enhance solubility in common organic solvents and to improve processibility, we prepared three new trifluorovinyl ether monomers, having hydrocarbon ether pendant groups, for polymerization: 1-[2-(2-ethoxy ethoxy)ethoxy]-1,2,2-trifluoroethene (Et-TFVE), 1-[2-(2-t-butoxy ethoxy)ethoxy]-1,2,2-trifluoroethene (t-Bu-TFVE), and 1-(2-phenoxy ethoxy)-1,2,2-trifluoroethene (Ph-TFVE). Homopolymers of these three monomers were prepared by aqueous emulsion polymerization with the use of a redox initiator. Poly(Et-TFVE) and poly(Ph-TFVE) were prepared with a range of molar masses, the highest of which had weight average molar masses of 33,800 g mol⁻¹ and 59,000 g mol⁻¹, respectively. As a result of monomer reactivity and structure, the polymerization mechanism was complicated, resulting in β-scission termination/chain transfer for all three polymers and hydrogen abstraction chain transfer for poly(Et-TFVE) and poly(t-Bu-TFVE). To the best of our knowledge, this is the first example of hydrogen abstraction from the pendant group of the trifluorovinyl ether itself. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3301–3308, 1999     

Polymerization of surface-active monomers. II. Polymerization of quarternary alkyl salts of dimethylaminoethyl methacrylate with a different alkyl chain length

The cationic monomers (C_NBr), obtained by quarternization of dimethylaminoethyl methacrylate with n-alkyl bromide containing varying carbon number (N = 4, 8, 12, 14, and 16) were polymerized with radical initiators in water and various organic solvents. The degree of polymerization of the resulting polymers was determined by GPC measurements on poly(methyl methacrylate) samples derived from them. The rate of polymerization of the micelle-forming monomers (N = 8, 12, 14, and 16) in water increases with increasing a chain length of alkyl group, whereas it is little dependent on N in isotropic solution in dimethylformamide. The data on the degree of polymerization for the polymers of C₄Br, C₈Br, and C₁₂Br show that the polymerization of C₁₂Br with azo initiators in water and benzene gives polymers with a very high degree of polymerization. The results obtained here suggest that highly developed or relatively rigid, aggregated structures of monomers in solution are responsible for the formation of the polymers with a very high degree of polymerization, in addition to an enhanced rate of polymerization. Also considered are the relation of the molecular weight of poly(C₁₂Br) to the viscosity data in chloroform and methanol.     

Anionic-initiated polymerization of β-nitrostyrenes

β-Nitrostyrene and many of its derivatives have been shown to yield high polymers via anionic initiation with alkoxide ions in protic solvents, e.g., alcohols. A study was conducted to determine the effect of certain substituents on the polymerization characteristics of representative monomers of this series and the properties of their polymers. A kinetic study was conducted and the relative rates of propagation were unexpectedly found to correlate well with brown's σ⁺ values. The rates of initiation of two representative monomers, β-nitrostyrene and p-methoxy-β-nitrostyrene, with sodium ethoxide were found to be 3.51 and 2.86 liter/mole sec, respectively. The rate of chain transfer in ethanol was studied qualitatively by using gel-permeation chromatography (GPC) to obtain molecular weight distribution (MWD) curves. The low values of the M _w/M _n ratios indicated little chain transfer in the protic solvent.     

Polymerization of N-(fluoro phenyl) maleimides

Poly(N-aryl maleimide)s of characteristic structures have been synthesized and some of their physical properties studied. These include N-(2-fluoro phenyl), N-(3-fluoro phenyl), N-(4-fluoro phenyl), N-(2,4-difluoro phenyl), N-(2,5-difluoro phenyl), N-(2,3,5,6-tetrafluoro phenyl), and N-(pentafluoro phenyl). The polymerization of N-(fluoro phenyl) maleimides by free-radical initiation in bulk or in solution and by anionic catalyst have been studied to compare the characteristics of polymerization by γ-ray irradiation with that by free-radical initiation. The polymers were characterized by elemental analysis, intrinsic viscosity, spectroscopy (IR and NMR), programmed thermogravimetric analysis, and x-ray diffraction. Spectra of polymers prepared by radiation and anionic polymerization were nearly identical with those of polymers prepared by free-radical polymerization initiated by AIBN in bulk or in solution and by the self-initiated thermal polymerization. A variety of reaction conditions were tried, but all attempts to change the molecular structure of the polymers were unsuccessful. Rates of thermal degradation for poly[N-(fluoro phenyl) maleimide]s have been analyzed by using a multiple-heating-rate procedure. Overall activation energy, order of reaction, and frequency factor have been evaluated. On the basis of the comparison between the overall activation energy of the thermal degradation of poly[N-(fluoro phenyl) maleimide]s and NMR spectra of their corresponding monomers, it can be concluded that the ¹H shifts due to ethylenic protons are so characteristic in sign and magnitude as to be useful in thermal stability elucidation. Some qualitative explanations were given on the stability of these polymers as affected by the type and size of the substituent. The x-ray diffractograms of all samples show two rather broad peaks indicative of noncrystalline structures. The location of the peaks does not depend upon preparation conditions and temperature. Poly(N-maleimide)s of fluoroanilines have not been hitherto described.     

Chemical structure of poly(trisubstituted vinylsilane) produced by γ irradiation

The chemical structure of polymers produced by the γ irradiation of monovinylsilanes was studied. γ-ray addition polymerization of monovinylsilanes such as trialkylvinylsilane was very slow, and only the liquid oligomers were formed from them by large radiation dose. The presence of silethylene or silmethylene linkage was ascertained in these polymers by infrared absorption spectroscopy and ¹H-NMR measurement, even when no Si? H bond existed in the monomers. The polymers were supposed to be produced by addition polymerization with intervening silalkylene linkage.     

Facile synthesis and characterization of hyperbranched poly(ether amide)s generated from Michael addition polymerization of in situ created AB2 monomers

A new straightforward strategy for synthesis of novel hyperbranched poly (ether amide)s from readily available monomers has been developed. By optimizing the reaction conditions, the AB₂‐type monomers were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to further polymerization in the presence (or absence) of an initiator, to prepare the hyperbranched polymer‐bearing multihydroxyl end‐groups. The influence of monomer, initiator, and solvent on polymerization and the molecular weight (MW) of the resultant polymers was studied thoroughly. The MALDI–TOF MS of the polymers indicated that the polymerization proceeded in the proposed way. Analyses of ¹H NMR and ¹³C NMR spectra revealed the branched structures of the polymers obtained. These polymers exhibit high‐moderate MWs and broad MW distributions determined by gel permeation chromatography (GPC) in combination with triple detectors, including refractive index, light scattering, and viscosity detectors. In addition, the examination of the solution behavior of these polymers showed that the values of intrinsic viscosity [η] and the Mark–Houwink exponent α were remarkably lower compared with their linear analogs, because of their branched nature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4309–4321, 2007     

Synthesis of ionic polymers by free radical polymerization using aprotic trimethylsilylmethyl-substituted monomers

Aprotic ionic polymers containing trimethylsilylmethyl-substituted imidazolium structures are synthesized using free radical polymerization of monomers comprising a vinyl group either at the cation or at the anion. Bulk polymerization is used for the room temperature ionic liquid monomer 1-trimethylsilylmethyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imide. In contrast to this, solution polymerization is applied for 1-trimethylsilylmethyl-3-methylimidazolium p-styrene sulfonate because this monomer undergoes self-polymerization during melting at a higher temperature than selected for bulk polymerization. Glass transition temperature (T _g) of the ionic polymers and intrinsic viscosity measurements indicate differences between these polymers, which are composed either of a polycation with a trimethylsilylmethyl substituent at each vinylimidazolium segment of the polymer chain and mobile bis(trifluoromethylsulfonyl)imide (NTf₂⁻) anions or a polyanion containing p-styrene sulfonate segments and mobile 1-trimethylsilylmethyl-3-methylimidazolium cations. The new aprotic ionic polymers containing trimethylsilylmethyl substituents may be interesting for application in adhesive, interlayer and membrane manufacturing.