Untersuchungen zur Reaktionsfähigkeit der höheren Silylphosphane (me3Si)4P2, [(me3Si)2P]2PH, [(me3Si)2P]2P–Sime3 und (me3Si)3P7

Investigations Concerning the Reactivity of the Higher Silylphosphanes (me₃Si)₄P₂, [(me₃Si)₂P]₂PH, [(me₃Si)₂P]₂P—Sime₃, and (me₃Si)₃P₇ The reaction of (me₃Si)₂P? P(Sime₃)₂ 1 in ether solutions (THF, monoglyme) with t-buLi (me ? CH₃; t-bu ? (CH₃)₃C) yields (me₃Si)₃P, (me₃Si)₂PLi and Li₃P₇ via (me₃Si)₂P? P(Li) (Sime₃) 4 . Already at ?40° (me₃Si)₃P₂Li 4 decomposes yielding (me₃Si)₂PLi, Li₃P₇ and (me₃Si)₃P. The metallation of (me₃Si)₃P₂H with t-buLi leads to the same results. t-buLi with [(me₃Si)₂P]₂PH 2 in pentane forms [(me₃Si)₂P]₂PLi, which reacts on with meCl or me₃SiCl to [(me₃Si)₂P]₂Pme or [(me₃Si)₂P]₂PSime₃, resp. On addition of monoglyme to a suspension of [(me₃Si)₂P]₂PLi in pentane, or by treating [(me₃Si)₂P]₂PH in ethers with t-buLi (me₃Si)₂PLi, Li₃P₇, (me₃Si)₃P, are formed. The same compounds are generated by reacting [(me₃Si)₂P]₂P—Sime₃ in ethers with t-buLi. The metallation of (me₃Si)₃P₇ in ethers with t-buLi yields (me₃Si)₂PLi, (me₃Si)₃P, (t-bu)₃P₄?(Sime₃), Li₃P₇ and a red solid. The formation of (me₃Si)₂P₇Li is the first step of this reaction.     

Untersuchungen zu Reaktionen des Diphosphanylsilans iPr2Si(PH2)2 mit Erdalkalimetallsilazaniden

The reaction of iPr₂Si(PH₂)₂ ( 1 ) with [Ca{N(SiMe₃)₂}₂(THF)₂] at 25 °C in molar ratio 1:1 yields the compound [Ca₃{iPr₂Si(PH)₂}₃(THF)₆] ( 2 ). Compound 2 consists of two Ca₂P₃ trigonal bipyramids with one conjoint calcium corner and SiiPr₂ bridged phosphorus atoms. In contrast, the same reaction at 60 °C yield the complex [Ca({P(SiiPr₂)₂PH}₂(THF)₄] ( 3 ). The isotype strontium compound [Sr({P(SiiPr₂)₂PH}₂(THF)₄] ( 4 ) was obtained from the reaction of iPr₂Si(PH₂)₂ with [Sr{N(SiMe₃)₂}₂(DME)₂]. The Compounds 2 – 4 were characterised by single crystal X‐ray diffraction, elemental analysis as well as IR and NMR spectroscopic techniques.     

[iPr2P]2P?SiMe3 und [iPr2P]2PLi – Synthese und Reaktionen Struktur des [iPr2P]2P?P[PiPr2]2

[iPr₂P]₂P? SiMe₃ and [iPr₂P]₂PLi – Synthesis and Reactions Structure of [iPr₂P]₂P? P[PiPr₂]₂ [iPr₂P]₂P? SiMe₃ 1 and [iPr₂P]₂PLi 2 were prepared to investigate the influence of the bulky alkyl groups on formation and properties of the ylides R₂P? P?P(X)R₂ (R = iPr, tBu; X = Br, Me) in reactions of 1 with CBr₄ and of 2 with 1,2-dibromoethane or MeCl, resp. Compared to the iPr groups the tBu groups favour the formation of ylides. With CBr₄ 1 forms iPr₂P? P?P(Br)iPr₂ 5 just as a minor product which decomposes already below ?30°C. With 1,2-dibromoethane 2 yields only traces of 5 but [iPr₂P]P? P[P(iPr)₂]₂ 7 as main product. With MeCl 2 gives iPrP? P?P(Me)iPr₂ 9 and [iPr₂P]₂PMe 10 in a molar ratio of 1:1. 9 is considerably more stable than 5. 7 crystallizes triclinic in the space group P1 (No. 2) with a = 10.813 Å, b = 11.967 Å, c = 15.362 Å, α = 67.90°, β = 71.36°, γ = 64.11° and two formula units in the unit cell.     

Bis(bis(trimethylsilyl)phosphino)silan [(Me3Si)2P]2SiH2 und 1,2-Bis(bis(trimethylsilyl)phosphino)disilan [(Me3Si)2PSiH2]2

The compounds H₂Si[P(SiMe₃)₂]₂ and [H₂SiP(SiMe₃)₂]₂ were prepared and characterized by ²⁹Si NMR, ³¹P NMR, IR and Raman spectroscopy. After thermolysis of these compounds no cyclic silylphosphanes could be detected in the reaction mixture,although this did contain P(SiMe₃)₃.     

Die darstellung von [(CH3)3PRu(CO)2Cl2]2 und [(Ch3)3P]2Ru(CO)2Cl2; Eine berichtigung zu: Die alkoholyse des triethylsilans katalysiert von [(Ch3)3P]2Ru(CO)2Cl2

The ruthenium(II) complex used as a catalyst in reactions of alcohols and Et₃SiH proved to be the dimer [(CH₃)₃PRu(CO)₂Cl₂]₂ and not the complex [(CH₃)₃P]₂ Ru(CO)₂Cl₂. Both complexes were prepared, characterized and their catalytic properties were compared.     

Synthese und Strukturen neuer Ringverbindungen des Bismuts mit Tris(trimethylsilyl)silyl und ‐stannylresten – [(Me3Si)3Si]4Bi4 und [(Me3Si)3Sn]6Bi8

Synthesis and Structures of Novel Ring Compounds of Bismuth with Tris(trimethylsilyl)silyl and ‐stannyl Substituents – [(Me₃Si)₃Si]₄Bi₄ and [(Me₃Si)₃Sn]₆Bi₈ A bicyclo[3.3.0]octane‐like core consisting of eight bismuth atoms is found in the novel octabismuthane Bi₈[Sn(SiMe₃)₃]₆. It is prepared like Bi₄[Si(SiMe₃)₃]₄ by reduction of BiBr₃ with Li(thf)₃E(SiMe₃)₃ (E = Si, Sn) together with (Me₃Si)₆E₂. Both bismuth ring compounds have been characterized by single crystal X‐ray crystallography.     

Reaktionen des Ketens und des Sulfens mit 2-Dialkylaminomethylencyclohexanonen

Zusammenfassung Es wird die Synthese von 2-(-Dialkylaminoacryloyl)cyclohexanonen beschrieben, uie durch Addition des Ketens an 2-Dialkylamino-methylencyclohexanone erhalten wurden.Außerdem wird die Darstellung von -Sultonen der 4-Hydroxy-2-dialkylamino-3,4-tetramethylen-3-buten-1-sulfonsäuren beschrieben, und zwar durch Reaktion des Sulfens, des Isosteren des Ketens, mit den vorher erwähnten 2-Dialkylamino-methylencuclohexanonen.

---

The synthesis of 2-(-dialkylaminoacriloyl)cyclohexanones by addition of ketene to 2-dialkylamino-methylenecyclohexanones is described.Also the preparation of 4-hydroxy-2-dialkylamino-3.4-tetramethylene-3-butene-1-sulfonic acid -sultones by reaction of sulphene with 2-dialkylamino-methylencyclohexanones is described.

---

---

Herrn Prof. Dr.F. Wessely mit den besten Wünschen zum 70. Geburtstag gewidmet.     

Reaktionen des tBu(Me3Si)P?P(Li)?P(tBu)2 mit CH3Cl und 1,2-Dibromethan

Reactions of tBu(Me₃Si)P? P(Li)? P(tBu)₂ with CH₃Cl and 1,2-Dibromoethane tBu(Me₃Si)P? P(Li)? P(tBu)₂ · 0.95 THF 1 with CH₃Cl (?70°C) yields tBu(Me₃Si)P? P = P(Me)(tBu)₂ 2 at ?70°C, with 1,2-Dibromoethane tBu(Me₃Si)P? PBr? P(tBu)₂ 3 (main product) and tBu(Me₃Si)P? P?P(Br)tBu₂ 4. 3 eliminates Me₃SiBr yielding the cyclotetraphosphane {tBuP? P[P(tBu)₂]}₂ 5 .     

Die Reaktionen von tBu2P–P=P(Me)tBu2 und (Me3Si)tBuP–P=P(Me)tBu2 mit PR3

The Reactions of ^tBu₂P–P=P(Me)^tBu₂ and (Me₃Si)^tBuP–P=P(Me)^tBu₂ with PR₃ ^tBu₂P–P=P(Me)^tBu₂ ( 1 ) reacts at 20 °C with PMe₃, PEt₃, P(c‐Hex)₃, P(p‐Tol)₃, PPh₂Me, PPh₂Et, PPhEt₂, PPh₂ⁱPr, PPh₃ and P(NEt₂)₃ yielding ^tBu₂P–P=PR₃ and ^tBu₂PMe; however, P^tBu₃, P^tBu₂(SiMe₃) and ^tBu₂PCl don't. ^tBu₂PH and 1 form ^tBu₂P–PH–P^tBu₂ which yields ^tBu₂P–P=PEt₃ when treated with PEt₃. Ph₂PH, ^tBuPH₂, PH₃, Ph₂PCl and EtOH don't substitute the ^tBu₂PMe group in 1 , instead, the molecule is decomposed. With PEt₃, (Me₃Si)^tBuP–P=P(Me)^tBu₂ forms (Me₃Si)^tBuP–P=PEt₃. The compounds ^tBu₂P–P=PR₃ decompose at 20 °C to different degrees giving P‐rich consecutive products of the phosphinophosphinidene.     

Synthese und Eigenschaften teilsilylierter Tri- und Tetraphosphane. Reaktionen lithiierter Diphosphane mit Chlorphosphanen

Synthesis and Properties of Partially Silylated Tri- and Tetraphosphanes. Reaction of Lithiated Diphosphanes with Chlorophosphanes The reactions of Li(Me₃Si)P? P(SiMe₃)(CMe₃) 1 , Li(Me₃Si)P? P(CMe₃)₂ 2 , and Li(Me₃C)P? P(SiMe₃)(CMe₃) 3 with the chlorophosphanes P(SiMe₃)(CMe₃)Cl, P(CMe₃)₂Cl, or P(CMe₃)Cl₂ generate the triphosphanes [(Me₃C)(Me₃Si)P]₂P(SiMe₃) 4 , (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)₂ 6 , [(Me₃C)₂P]₂P(SiMe₃) 7 , and (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)Cl 8 . The triphosphane (Me₃C)₂P? P(SiMe₃)? P(SiMe₃)₂ 5 is not obtainable as easily. The access to 5 starts by reacting PCl₃ with P(SiMe₃)(CMe₃)₂, forming (Me₃C)₂ P? PCl₂, which then with LiP(SiMe₃)₂ gives (Me₃C)₂ P? P(Cl)? P(SiMe₃)₂ 11 . Treating 11 with LiCMe₃ generates (Me₃C)₂P? P(H)? P(SiMe₃)₂ 16 , which can be lithiated by LiBu to give (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 13 and after reacting with Me₃SiCl, finally yields 5 . 8 is stable at ?70°C and undergoes cyclization to P₃(SiMe₃)(CMe₃)₂ in the course of warming to ambient temperature, while Me₃SiCl is split off. 7 , reacting with MeOH, forms [(Me₃C)₂P]₂PH. (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 18 , which can be obtained by the reaction of 5 with LiBu, decomposes forming (Me₃C)₂P? P(Li)(SiMe₃), P(SiMe₃)₃, and LiP(SiMe₃)₂, in contrast to either (Me₃C)₂P? P(Li)? P(SiMe₃)(CMe₃) 19 or [(Me₃C)₂P]₂PLi, which are stable in ether solutions. The Li phosphides 1 , 2 , and 3 with BrH₂C? CH₂Br form the n-tetraphosphanes (Me₃C)(Me₃Si)P? [P(SiMe₃)]₂? P(SiMe₃)(CMe₃) 23 , (Me₃C)₂P? [P(SiMe₃)]₂? P(CMe₃)₂ 24 , and (Me₃C)(Me₃Si)P? [P(CMe₃)]₂? P(SiMe₃)(CMe₃) 25 , respectively. Li(Me₃Si)P? P(SiMe₃)₂, likewise, generates (Me₃Si)₂P? [P(SiMe₃)]₂? P(SiMe₃)₂ 26 . Just as the n-triphosphanes 4 , 5 , 6 , and 7 , the n-tetraphosphanes 23 , 24 , and 25 can be isolated as crystalline compounds. 23 , treated with LiBu, does nor form any stable n-tetraphosphides, whereas 24 yields (Me₃C)₂P? P(Li)? P(SiMe₃)? P(CMe₃)₂, that is stable in ethers. With MeOH, 24 , forms crystals of (Me₃C)₂P? P(H)? P(SiMe₃)? P(CMe₃)₂.     

Bildung siliciumorganischer Verbindungen. 105. Reaktionen des (Cl3Si)2CPMe2Cl mit Silylphosphanen

Formation of Organosilicon Compounds. 105. Reactions of (Cl₃Si)₂C?PMe₂Cl with Silylphosphanes The reaction of (Cl₃Si)₂C?PMe₂Cl 1 with MeP(SiMe₃)₂ proceeds at 130°C (15 hrs.), by cleavage of all Si? P bonds to compounds 2, 3, 4, 5 . The course of this reaction incorporates a number of stages of which the compounds (Cl₃Si)₂C? PMe₂? P(Me)SiMe₃, (Cl₃Si)₂C?PMe₂? PMe? P(Me)SiMe₃ and ClP(Me)SiMe₃ are important and are yet to be isolated. The reaction of (Cl₃Si)₂C?PMe₂Cl with LiP(SiMe₂)₂ produces compound 2 as well as p₂(SiMe₃)₄ and P(SiMe₃)₃. The formation of 2 can be explained by the initial formation of the intermediate (Cl₃Si)₂C?PMe₂? P(SiMe₂)₂ with reacts with 1 to produce 2 and (ClP(SiMe)₃)₂. The formation of P₂(SiMe₃)₄ is also explained by the reaction of ClP(SiMe₃)₂ with LiP(SiMe₃)₄. The reaction of (Cl₃Si)₂C?PMe₂C(H)PMe₂ at 130°C/15–20 hrs. is related to the formation of (Me₃Si)₂C(H)Pme₂ from corresponding Si-methylated phosphorylides with the exception that, at 0°C, this reaction goes to completion within a few minutes.     

Reaktionen von P4S3I2 mit bifunktionellen Liganden

Reactions of P₄S₃I₂ with Bifunctional Ligands Nitrogen, oxygen, selenium or carbon atoms were introduced as bridges into the P₄S₃ skeleton by the reaction of α- or β-P₄S₃I₂ with bifunctional ligands. Among compounds in the series α-P₄S₃-α-E, the oxide μ-P₄SO was made for the first time. High concentrations of α-P₄S₄Se, made by a new route, allowed observation of ⁷⁷Se satellites in its ³¹P NMR spectrum and hence the assignment of ³¹P chemical shifts. Polymeric species were more stable than these monomers, leading to low yields in both reactions. α- and β-isomers of P₄S₃I₂ reacted with diethyl malonate. While β-P₄S₃I₂ gave traces of β-P₄S₃(CR₂)(R = C₂H₅CO₂) and of β-P₄S₃(CHR₂)_exo(CHR₂)_endo, along with insoluble products, α-P₄S₃I₂ yielded α-P₄S₃(CR₂), which could be isolated. P₄S₂(CR₂), a new skeleton similar to that of P₄S₃, was formed on storage of CS₂ solutions of a-P₄S₃(CR₂) for two days. The ³¹P NMR data of the molecules are given.     

Schwingungsspektrum und Kraftkonstanten des Tetrakis-trimethylsilyl-hydrazin,[(CH3)3Si]2N-N[Si(CH3)3]2

The vibrational spectra (IR and RAMAN ) have been taken for tetrakis-trimethylsilyl-hydrazine. A complete assignment of all observed bands is given. The silicium-nitrogen vibrations are interpreted in terms of a D_2d configuration. Force constants of the GVFF are computed. The valency force constant of the nitrogen-nitrogen bond is comparable to that of N₂H. This proves the interaction of the silicium atoms with the free electron pairs of the two nitrogen atoms.     

Synthese und Kristallstruktur des trimeren [(Me3Si)2CH]2Al?CN

Synthesis and Crystal Structure of the Trimeric [(Me₃Si)₂CH]₂Al? CN Tetrakis[bis(trimethylsilyl)methyl]dialane(4) 1 with an Al? Al bond reacts with tert-butyl isocyanide in the molar ratio of 1:2 within three days to give a mixture of several unknown products, from which the title compound 4 is isolated in a 26% yield by recrystallization from n-pentane. 4 is a trimer in the solid state via Al? C?N? Al bridges showing a nine-membered Al₃C₃N₃ heterocycle in a boat conformation. In contrary to the reaction with phenyl isocyanide the expected dark red product of the twofold insertion into the Al? Al bond under formation of a carbon-carbon single bond is detected only spectroscopically as a minor by-product.