Novel amorphous perfluorocopolymeric system: Copolymers of perfluoro‐2‐methylene‐1,3‐dioxolane derivatives

Perfluorotetrahydro‐2‐methylene‐furo[3,4‐d][1,3]dioxole (monomer I ) and perfluoro‐2‐methylene‐4‐methoxymethyl‐1,3‐dioxolane (monomer II ) are soluble in perfluorinated or partially fluorinated solvents and readily polymerize in solution or in bulk when initiated by a free‐radical initiator, perfluorodibenzoyl peroxide. The copolymerization parameters have been determined with in situ ¹⁹F NMR measurements. The copolymerization reactivity ratios are r _I = 1.80 and r _II = 0.80 in 1,1,2‐trichlorotrifluoroethane at 41 °C and r _I = 0.97 and r _II = 0.85 for the bulk polymerization. These data show that this copolymerization pair has a good copolymerization tendency and yields nearly ideal random copolymers. The copolymers have only one glass‐transition temperature from 101 to 168 °C, depending on the copolymer compositions. Melting endotherms have not been observed in their differential scanning calorimetry traces, and this indicates that all the copolymers with different compositions are completely amorphous. These copolymers are thermally stable (the initial decomposition temperatures are higher than 350 °C under an N₂ atmosphere) and have low refractive indices and high optical transparency from UV to near‐infrared. Copolymer films prepared by casting were flexible and tough. These properties make the copolymers ideal candidates as optical and electrical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1613–1618, 2006     

High‐efficiency,electrophosphorescent polymers with porphyrin–platinum complexes in the conjugated backbone: Synthesis and device performance

A series of soluble, conjugated, electrophosphorescent copolymers with (meso‐tetraphenylporphyrinato‐κ⁴N)platinum(II) (PtTPP) complexes incorporated into the polymer main chain were synthesized through the copolymerization of narrow‐band‐gap monomeric porphyrin–platinum(II) complexes and wide‐band‐gap dialkyl‐substituted fluorene monomers by a modified Suzuki coupling reaction. The study of the photoluminescence decay indicated that poly[2,7‐(9,9‐dioctylfluorene)‐co‐2,12‐((meso‐tetraphenylporphyrinato‐κ⁴N)platinum(II))] (PFO–PtTPP) was a triplet emitter. The electroluminescence emission from the fluorene segment was completely quenched for copolymers with PtTPP contents as low as 0.5 mol %. The PFO–PtTPP copolymers emitted deep red light. The device based on the porphyrin–platinum(II) copolymer PFO–5PtTPP (with 5 mol % PtTPP in the copolymer) showed the highest external quantum efficiency of 1.95% with an emission peak at 684 nm in an indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polyvinylcarbazole (PVK)/70:30 (w/w) PFO–5PtTPP: 2‐(biphenyl‐4‐yl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole/Ba/Al device configuration. In comparison with the PFO–PtTPP copolymers synthesized via a postpolymerization metalation route, copolymerization from Pt metal complexes proved to be a more efficient synthetic route for high‐efficiency electrophosphorescent polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4174–4186, 2006     

Copolymerization of unsaturated spiro ortho esters with maleic acid derivatives

The formation of charge-transfer (CT) complexes of unsaturated spiro ortho esters such as 2-methylene-1,4,6-trioxaspiro[4.4]nonane(I) and 2-methylene-1,4,6-trioxaspiro[4.6]undecane(II) with maleic acid derivatives such as maleic anhydride (Manh), dimethyl maleate (DMM), and N-ethyl maleimide (NEM) was ascertained by ultraviolet (UV) and nuclear magnetic resonance (NMR) spectroscopy. The stoichiometries of these complexes were estimated as 1:1. The determination of their equilibrium constants (K) was attempted by using the Hanna-Ashbough equation with NMR spectroscopy. Although K values for I-DMM and II-DMM were specified as 0.266 and 0.336 L/mol, respectively, those for the other systems could not be obtained but were assumed to be negligible small (K ? 1). Copolymerization of these systems which was carried out without an initiator determined that spontaneous copolymerization occurs in all cases but that the copolymerization rates of I-DMM and II-DMM systems are slow. The systems in which Manh or DMM was used as an acceptor monomer gave the alternating copolymers at various monomer to feed ratios. The terpolymerizaton of the I–Manh–DMM system established that DMM takes little part in giving the alternating copolymers I and Manh. Consequently, it was assumed that the reactivity of the CT complex monomer is dependent on the contribution of the dative structure to CT complex.     

Synthesis of stereoregular heteropolysaccharides having amino-groups by ring-opening copolymerization of 1,6-anhydro-azido-sugar derivatives

The cationic, ring-opening copolymerization of 1,6-anhydro-2-azido-3,4-di-0-benzyl-2-deoxy-(2-ABG), -3-azido-2,4-di-0-benzyl-3-deoxy- (3-ABG), -4-azido-2,3-di-0-benzyl-4-deoxy-β-D -glucopyranose (4-ABG) with 1,6-anhydro-2,3,4-tri-0-benzyl-β-D -glucopyranose (LGTBE) was investigated with phosphorus pentafluoride as catalyst at low temperatures, giving highly stereoregular, (1→6)-α-linked copolymers with number-average molecular weights of 3.90 × 10⁴?9.27 × 10⁴. Structure and composition of the copolymers were determined by ¹H- and ¹³C-NMR spectroscopies and elemental analysis, which indicated that copolymerization occurred in a stereoregular manner to give azido groups containing (1→6)-α-linked glucopyranan derivatives. The differences in polymerizability among the three azido monomers are discussed. Regioselective reduction of three kinds of heteropolysacharide derivatives which had different quantities of azido groups at C-2, -3, or -4 position with lithium aluminum hydride and subsequent debenzylation of the copolymers with sodium in liquid ammonia produced amino-group-containing heteropolysaccharides.     

Organometallic polymers. XIV. Copolymerization of vinylcyclopentadienyl manganese tricarbonyl and vinylferrocene with N-vinyl-2-pyrrolidone

N-Vinyl-2-pyrrolidone(I) has been copolymerized with vinylferrocene(II) and vinylcyclopentadienyl manganese tricarbonyl(III) in degassed benzene solutions with the use of azobisisobutyronitrile (AIBN) as the initiator. The polymerizations proceed smoothly, and the relative reactivity ratios were determined as r₁ = 0.66, r₂ = 0.40 (for copolymerization of I with II, M₁ defined as II) and r₁ = 0.14 and r₂ = 0.09 (for copolymerization of I with III, M₁ defined as III). These copolymers were soluble in benzene, THF, chloroform, CCl₄, and DMF. Molecular weights were determined by viscosity and gel-permeation chromatography studies (universal calibration technique.) The copolymers exhibited values of M?_n between 5 × 10³ and 10 × 10³ and M?_w between 7 × 10³ and 17 × 10³ with M?_w/M?_n < 2. Upon heating to 260°C under N₂, copolymers of III underwent gas evolution and weight loss. The weight loss was enhanced at 300°C, and the polymers became in creasingly insoluble. Copolymers of vinylferrocene were oxidized to polyferricinium salts upon treatment with dichlorodicyanoquinone (DDQ) or o-chloranil (o-CA) in benzene. Each unit of quinone incorporated into the polysalts had been reduced to its radical anion. The ratio of ferrocene to ferricinium units in the polysalts was determined. The polysalts did not melt at 360°C and were readily soluble only in DMF.     

Vinylhydroquinone. IV. Preparation and polymerization behavior of 2-methyl-5-vinylhydroquinone derivatives

As in the case of vinylhydroquinone (I), its alkyl-substituted derivative, 2-methyl-5-vinylhydroquinone (II) was found to copolymerize with methyl methacrylate by tri-n-butylborane in cyclohexanone at 30°C. II was prepared from the O,O′-bisether compound, 2-methyl-5-vinyl-O,O′-bis(1′-ethoxyethyl)hydroquinone (III). The monomer reactivity ratios (M₂ = II) were determined to be r₁ = 0.37 and r₂ = 0. No homopolymerization proceeded under the same conditions. Ordinary free-radical initiators, such as azobisisobutyronitrile and benzoyl peroxide, were not effective in the homopolymerization of II. 1:1 Copolymers were obtained from II and maleic anhydride by using tri-n-butylborane as an initiator. The copolymers exhibited no definite melting range and decomposed at 370–375°C endothermally (DSC). The polymerization behavior of III was also investigated. Although tri-n-butylborane did not initiate the homopolymerization of the monomer, azobisisobutyronitrile was capable of initiating the homopolymerization and copolymerization of III. The monomer reactivity ratios (M₁ = styrene) were determined to be r₁ = 0.83 and r₂ = 0.18. The ratios gave the following Q and e values; Q = 0.15 and e = ?2.2.     

Copolymerization of anhydroglucose and anhydromannose derivatives: Structure,reactivity, and conformational analyses

Phosphorus pentafluoride-catalyzed copolymerization of 1,6-anhydro-2,3,4-tri-O-(p-methylbenzyl)-β-D -glucopyranose (TXGL, monomer G) and 1,6-anhydro-2,3,4-tri-O-benzyl-β-D -mannopyranose (TBMN, monomer M) appears to follow classical copolymerization theory. Reactivity ratios calculated by the procedure of Mayo and Lewis were r_G = 0.90 ± 0.08, r_M = 11.5 ± 0.80, from which sequence distributions were calculated. A conformational analysis of anhydro sugar polymerization is presented to explain differences in reactivity of monomers and their derived cations in polymerization and copolymerization. The polymers and copolymers were characterized by viscosity, ¹H- and ¹³C-NMR spectroscopy, optical rotation, and circular dichroism. The reaction gives stereoregular polymers as have other polymerizations and copolymerizations of this class.     

Structure and reactivity in cationic polymerization of butadiene derivatives. IV. 1-alkoxybutadienes

The reactivity of trans-1-alkoxybutadienes in cationic homopolymerization and copolymerizations and structure of the polymers produced were investigated. 1-Ethoxybutadiene is polymerized easily at ?78°C by various acidic catalysis. The reactivity of 1-ethoxybutadiene was similar to that of ethyl vinyl ether. The polymers produced possessed molecular weights of several thousands, and were composed of 70–95% 1,4 structure and 5–30% 3,4 structure. In the copolymerization of ethyl vinyl ether (M₁) with 1-ethoxybutadiene at ?78°C in toluene by boron trifluoride diethyl etherate, r₁ = 1.15, r₂ = 2.62. From the Hammett plot of the relative reactivities of alkoxybutadienes (alkoxy: CH₃O, C₂H₅O, i-C₃H₇O), the reaction constant _p^* was determined to be ?2.9. Results of the present study were compared with those of various butadiene derivatives.     

Penultimate effects in the copolymerization of maleic anhydride with electron‐rich styrene derivatives

The (controlled) free‐radical copolymerization of maleic anhydride and styrene or derivatives thereof is often thought to provide nearly perfect alternating copolymers. Here, the RAFT copolymerization of electron‐rich styrene derivatives with maleic anhydride is reported. This copolymerization shows distinct penultimate effects, resulting in polymers with increased incorporation of styrene monomers, that is, where a tendency toward periodic (S‐S‐MA) copolymers exists. This work could be a first step towards periodic copolymers based on maleic anhydride and styrene derivatives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2932–2939     

Ring-opening polymerization of 2,3,5,6-tetrasubstituted-3,4-dihydro-2H-pyrans and their copolymerization behaviors. Syntheses of alternating head-to-head vinyl copolymers and their properties

2-Methoxy-6-ethoxy-5-cyano-3,4-dihydro-2H-pyran ( 1 a), 2-isobutoxy-6ethoxy-5-cyano-3,4-dihydro-2H-pyran ( 1 b), and 2,6-diethoxy-3-methyl-5-cyano-3,4-dihydro-2H-pyran ( 1 c) were prepared by (4 + 2) cycloaddition reaction of ethyl α-cyanoacrylate with the corresponding vinyl ethers. Compounds 1 a-c were ring-open polymerized by cationic catalyst to obtain alternating head-to-head (H? H) copolymers. For comparison, head-to-tail (H? T) copolymer 3 a was also prepared by free radical copolymerization of the mixture of the corresponding monomers. The H–H copolymer exhibited minor differences in its ¹H-NMR and IR spectra, but in the ¹³C-NMR spectrum significant differences were shown between the H? H and H? T copolymers. Glass transition temperature (T_g) of H? H copolymer was higher than that of the corresponding H? T copolymer, but thermal decomposition temperature of the H? H copolymer was lower than that of the H? T copolymer. Compounds 1 a and 1 b copolymerized well with styrene by cationic catalyst, but compound 1 c failed to copolmerize with styrene. All of the H-H and H-T copolymers were soluble in common solvents and the inherent viscosities were in the range 0.2–0.5 g/dL.     

Water-soluble polymer derivatives of cholesterol

New cholesterol-containing water-soluble polymers based on N-methacryloyl aminoglucose and N-vinylpyrrolidone are synthesized by free-radical copolymerization and polymer-analogous transformations. Binary and ternary copolymers of various composition containing N-allylamine and N,N,N-trimethylaminoethyl methacrylate methyl sulfate units and cholesterol residues are prepared. Luminescently labeled copolymers of the same composition are obtained. Effects of the nature of polymers and the amount of cholesterol in them on the intramolecular mobility of macromolecules in solution are studied with polarized luminescence. When 2–4 mol % of cholesterol residues are incorporated into the copolymer, the intramolecular mobility of macromolecules decreases, thus indicating formation of intramolecular compact structures via interaction of nonpolar cholesterol groups. In copolymers containing charged groups, these structures are looser than those in neutral copolymers. It is shown that macromolecules of cholesterol-containing polymers of various types can interact with each other. 1 This work was supported by the Russian Foundation for Basic Research (project no. 08-03-00324) and the Council for Grants of the President of the Russian Federation for Support of Leading Institutes of Higher Education (NSh-4391.2008.3).     

Studies in cyclocopolymerization. III. Copolymerization of divinyl ether with certain nitrogen-containing alkenes

The copolymerization of divinyl ether with fumaronitrile (A), tetracyanoethylene (B), and 4-vinylpyridine (C) has been studied, azobisisobutyronitrile being used as initiator. The compositions of the copolymers were calculated from their nitrogen and unsaturation content. Over a wide range of initial monomer composition, the mole fraction of A in the copolymers lies in the range 0.55–0.63, and the copolymers contained only 2–3% unsaturation, indicating a high degree of cyclization. The composition of the copolymers of B indicated that cyclization occurred to only a small extent, as the copolymers contained rather high unsaturation content. The values of r₁ = 0.23 and r₂ = 0.12 were obtained. The mole fraction of C in the copolymers lies between 0.85 and 0.998. If the assumption is made that r₁ ? r_c ? 0 and there is predominant cyclization, r₂ = 32.0 in this case. The difference in the composition of the copolymers is attributed to the difference between the electron density of the double bonds in A, B, and C.     

Property modification of poly(methyl methacrylate) through copolymerization with fluorinated aryl methacrylate monomers

Copolymers of methyl methacrylate (MMA) with 2,3,5,6‐tetrafluorophenyl methacrylate (TFPMA), pentafluorophenyl methacrylate (PFPMA), and 4‐trifluoromethyl‐2,3,5,6‐tetrafluorophenyl methacrylate (TFMPMA) were investigated. All the three systems showed a random copolymerization character. The composition, glass transition temperature (T_g), and refractive index of the copolymers obtained were studied. T_gs of TFPMA/MMA and PFPMA/MMA copolymers were found to deviate positively from the Gordon–Taylor equation. However, T_gs of TFMPMA/MMA copolymers were well fit with the Gordon–Taylor equation. These results indicated the existence of interaction between MMA and either TFPMA or PFPMA units in copolymers. This interaction resulted in the enhancement of the T_g of MMA polymers through the copolymerization with TFPMA and PFPMA. The refractive index and the light transmittance of copolymers were close to those of PMMA. Copyright © 2007 John Wiley & Sons, Ltd.     

Oxygen‐barrier properties of copolymers based on ethylene terephthalate

The oxygen‐barrier properties of amorphous polyethylene terephthalate‐based copolymers with various acid comonomers were examined. The incorporation of increasing amounts of isophthalate, phthalate, or naphthalate gradually reduced the permeability P toward the low values obtained for the corresponding homopolymers. The permeability of poly(ethylene 3,4′‐bibenzoate) homopolymer was only slightly lower than that of polyethylene terephthalate, and the copolymers correspondingly exhibited a very gradual decrease in P as the amount of 3,4′‐bibenzoate (3,4′BB) increased. In contrast, copolymerization with the linear isomer, 4,4′BB, produced a substantial increase in P. Generally, comonomer affected the solubility S less than the diffusivity D, and therefore changes in P reflected primarily changes in D for the polymers studied. The diffusivity and solubility depended on the copolymer composition in accordance with static and dynamic free‐volume concepts of gas permeability in glassy polymers. The solubility S correlated with the amount of free volume as determined by the glass‐transition temperature. Correlation of the diffusivity D with the magnitude of the subambient γ relaxation identified dynamic free volume with thermally activated conformational changes and segmental motions. Correspondence in the activation energy confirmed the relationship. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1889–1899, 2001     

Cationic ring-opening polymerization of new 1,6-anhydro-β-lactose derivatives

Synthesis and cationic ring-opening polymerization of new 1,6-anhydro-β-lactose derivatives such as hexa-O-methylated (LSHME), tert-butyldimethylsilylated (LSHSE), and benzylated 1,6-anhydro-β-lactoses (LSHBE) were first investigated. The disaccharide monomers were prepared by methylation, tert-butyldimethylsilylation, and benzylation of 1,6-anhydro-β-lactose, respectively. It was found that LSHME was readily polymerized with such Lewis acid catalysts as PF₅ and SbCl₅ to give stereoregular 2,3-di-O-methyl-4-O-(2′,3′,4′,6′-tetra-O-methyl-β-D -galactopyranosyl)-(1→6)-β-D -glucopyranans which are comb-shaped polysaccharide derivatives. However, LSHSE and LSHBE had almost no polymerizability. It was revealed that the ring-opening polymerizability of the anhydrodisaccharide monomers was influenced by the steric hindrance of the hydroxyl-protective groups. Ring-opening copolymerization of LSHME with 1,6-anhydro-2,3,4-tri-O-benzyl-β-D -glucopyranose (LGTBE) in various ratios of monomer feeds was also examined to afford the corresponding copolymers. Structural analyses of the monomers and polymers were carried out by means of high resolution nuclear magnetic resonance spectroscopy.     

Polymeric formamides as liquid–liquid phase transfer catalysts

Polymeric formamides were prepared by free radical polymerization of N-methyl-N-vinyl-formamide or N-methyl-N-(4-vinylbenzyl)formamide, and copolymerization of these monomers with styrene. These soluble polymers serve as phase transfer catalysts for several reactions under liquid–liquid biphase conditions. The catalytic activity of copolymers containing styrene unit is affected remarkably by composition, and there are maxima at certain composition in both polymers. However, copolymers with an acrylonitrile co-unit scarcely exhibit catalytic activity. Furthermore, it was found that these polymers can extract all alkali metal ions employed here, and that the extraction ability increases with increasing the density of active sites. From these results, it is demonstrated that catalytic activity strongly depends on both cation extraction ability of polymers and lipophilicity around the active sites in the polymer.     

Random multiacceptor poly(2,7‐carbazole) derivatives containing the pentacyclic lactam acceptor unit TPTI for bulk heterojunction solar cells

Here, a family of donor/acceptor (D/A) alternating copolymers and random two‐acceptor and three‐acceptor copolymers were synthesized via Suzuki polymerization based on heptadecan‐9‐yl substituted carbazole as a donor and 4,7‐Bis(5‐bromothiophene‐2‐yl)benzo[c][1,2,5]thiadiazole (DTBT), 2,5‐diethylhexyl‐3,6‐bis(5‐bromothiophene‐2‐yl)pyrrolo[3,4‐c]‐pyrrole‐1,4‐dione (DPP) and 2,8‐dibromo‐4,10‐bis(2‐ethylhexyl)thieno[2′,3′:5,6] pyrido[3,4‐g]thieno[3,2‐c]isoquinoline‐5,11(4H,10H)‐dione (TPTI) as acceptors. For the first time, a relatively new electron‐deficient TPTI unit was used as an acceptor in carbazole‐based conjugated polymers. Introduction of the electron‐deficient TPTI unit into the polymer backbone increased the open‐circuit voltage (V_oc) of the resulting polymer solar cells up to 0.96 V. PCTPTI and PCDTBT‐TPTI exhibited external quantum efficiencies (EQE) up to 75%. All random two‐acceptor copolymers showed broadened absorption profiles compared to the D/A alternating analogues. In order to further improve the light absorption, a random three‐acceptor copolymer was synthesized for the first time, resulting in the broadest absorption in the range of 350–750 nm. Highest occupied molecular orbital (HOMO) energies and V_oc values of the resulting polymers could be successfully tuned by introducing different monomer units into the polymer backbone in different ratios. These results indicate that TPTI is a promising acceptor unit for conjugated polymers and that the random copolymer approach is a successful tool for fine tuning of polymer properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2781–2786     

Synthesis and polymerization of some optically active 2- and 1,2-substituted butadienes

Dehydration of (S)-3,5-dimethyl-1-hepten-3-ol gave: (3E)- (I) and (3Z)-(5S)-3,5-dimethyl-1,3-heptadienes (II) and 2-[(S)- 2-methylbutyl]-1,3-butadiene (III). 2-[(S)-1-Methylpropyl]-1,3-butadiene (IV) was also prepared similarly by dehydration of (S)-3,4-dimethyl-1-hexene-3-ol. Monomers I–IV we polymerized in the presence of the TiCl₄–Al(i-C₄H₉)₃ catalyst system and in emulsion with K₂S₂O₈ as initiator. Monomer IV was also polymerized in the presence of butyllithium. Specific rotations of polymers are of the same order of magnitude as that of monomers, with exception of polymers prepared by stereospecific polymerization of (S)-I and (S)-II. The acetone-soluble fraction of these polymers has a molar rotation similar to that of monomer, while the acetone-insoluble part has a lower rotation ([M]_D of monomer +53.2°; [M]_D of polymer, +5.9°).     

Synthesis of highly conductive EDOT copolymer films via oxidative chemical in situ polymerization

Poly(3,4‐ethylenedioxythiophene)s (PEDOT) represent a class of conjugated polymers that can be potentially used as an electrode material for flexible organic electronics due to their superior conductivity and transparency. In this study, we demonstrate that the conductivity of a PEDOT containing copolymer film can be further enhanced by the oxidative chemical in situ copolymerization of a liquid film spun coated from monomer mixture (3,4‐ethylenedioxythiophene (EDOT) and 3‐thienyl ethoxybutanesulfonate (TEBS)), oxidant (iron(III) p‐toluenesulfonate (Fe(OTs)₃)), weak base (imidazole), and solvent (methanol). We investigated that the effect of the processing parameters such as the molar ratios TEBS/EDOT, IM/EDOT, and Fe(OTs)₃/EDOT on the surface morphology, optical property, and the conductivity of the resulting copolymer films. These parameters have been optimized to achieve conductivities for the copolymer films as high as 170 S/cm compared with a conductivity of 30 S/cm for the pure PEDOT film synthesized using the same fabrication method. This conductivity enhancement for the copolymer films was found to be resulted from the fact that the addition of TEBS monomer reduces the copolymerization rate, leading to the formation of much more uniform film surface without defects and copolymers of higher molecular weight which increase the conductivity of the resulting copolymer film. The composition of two monomers in the copolymer film is not related to the variation of conductivity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1662–1673, 2008     

Polymerization of cyclic acetals. II. Synthesis of amphiphilic block copolymers

The sequential copolymerization of 1,3,6-trioxacyclooctane (TOC) and 1,3-dioxolane (DOL) (B) with various vinyl monomers (A) was investigated. Under appropriate conditions amphiphilic block copolymers of the type AB and ABA were formed. The reaction mixtures and the isolated polymers were analyzed by GPC (double detection—IR and UV at 254 nm), IR, ¹H-, and ¹³C-NMR spectroscopy. Block copolymers with chosen molecular weights and low polydispersity could be obtained only by sequential copolymerization of p-methoxystyrene on “living” TOC. In the polymerization of DOL with α-methylstyrene and i-butyl vinyl ether (IBVE) transfer reactions take place to a larger degree.