Site-specific polymer attachment to a CCL-5 (RANTES) analogue by oxime exchange

A synthetic strategy that allows for the site-specific attachment of polymers such as poly(ethylene glycol) (PEG) to protein pharmaceuticals is described. PEG was attached to a 67-amino acid fully synthetic CCL-5 (RANTES) analogue at its GAG binding site both to reduce aggregation and to increase the circulating lifetime. Effective protection of an Aoaa chemoselective linker during peptide assembly, total chemical protein synthesis, and protein folding was achieved with an isopropylidene group. Mild deprotection of the resulting folded synthetic protein and subsequent polymer attachment occur without interference with the native folded structure and activity.     

Use of intein-directed peptide biosynthesis to improve serum stability and bioactivity of a gelatinase inhibitory peptide

Screening of phage display libraries allows rapid identification of peptides binding to a target. However, functional analysis of the phage sequences and their reproduction as soluble and stable peptides are often the most time-consuming part in the screening. We have used here intein-based peptide biosynthesis to produce a phage-display derived gelatinase inhibitory peptide CTTHWGFTLC and to identify the critical residues for gelatinase inhibitory activity by performing alanine-scanning mutagenesis. By biosynthetic incorporation of 5-fluorotryptophan, we obtained an inhibitor of MMP-2 and MMP-9 gelatinases that showed a 6-fold enhancement in serum stability in comparison to the wild-type peptide. The new peptide also had an improved ability to inhibit tumor cell migration. These studies indicate the utility of intein methodology for synthesis and design of peptides obtained by phage display.     

Functional determinants of a synthetic vesicle fusion system

Selective membrane mergers may be driven by small-molecule recognition between synthetic surface-displayed fusogens which bear vancomycin glycopeptide and its native binding target, D-Ala-D-Ala dipeptide. These recognition motifs are membrane anchored by antimicrobial peptide magainin II and a phosphatidylethanolamine lipid derivative, respectively. We report herein characterization of this synthetic membrane fusion reaction with regard to the following: effects of fusogen concentration, lipid composition, and membrane charge. Our findings indicate that these parameters are determinants of fusion rate, vesicle stability, peptide binding, catalytic fusion and membrane disruption during fusion. Notably, these data indicate the importance of coupling between molecular recognition and insertion for bilayer activation as well as the critical role of membrane subdomain formation for membrane fusion reactivity. These phenomena are general to lipid membrane chemistry, and therefore these findings provide a guideline for understanding more complex biomembrane systems.     

Revealing Angiopep-2/LRP1 Molecular Interaction for Optimal Delivery to Glioblastoma (GBM)

Background: The family of synthetic peptide angiopeps, and particularly angiopep-2 (ANG-2) demonstrated the ability preclinically and clinically to shuttle active molecules across the blood–brain barrier (BBB) and selectively toward brain tumor cells. The literature has also proved that the transport occurs through a specific receptor-mediated transcytosis of the peptide by LRP-1 receptors present both on BBB and tumor cell membranes. However, contradictory results about exploiting this promising mechanism to engineer complex delivery systems, such as nanoparticles, are being obtained. Methodology: For this reason, we applied a molecular docking (MD)-based strategy to investigate the molecular interaction of ANG-2 and the LRP-1 ligand-binding moieties (CR56 and CR17), clarifying the impact of peptide conjugation on its transport mechanism. Results: MD results proved that ANG-2/LRP-1 binding involves the majority of ANG-2 residues, is characterized by high binding energies, and that it is site-specific for CR56 where the binding to 929ASP recalls a transcytosis mechanism, resembling the binding of the receptor to the receptor-associated protein. On the other hand, ANG-2 binding to CR17 is less site-specific but, as proved for apolipoprotein internalization in physiological conditions, it involves the ANG-2 lysin residue. Conclusions: Overall, our results proved that ANG-2 energetic interaction with the LRP-1 receptor is not hindered if specific residues of the peptide are chemically crosslinked to simple or complex engineered delivery systems.     

Sequence-specific recognition and cooperative dimerization of N-terminal aromatic peptides in aqueous solution by a synthetic host

This article describes the selective recognition and noncovalent dimerization of N-terminal aromatic peptides in aqueous solution by the synthetic host compound, cucurbit[8]uril (Q8). Q8 is known to bind two aromatic guests simultaneously and, in the presence of methyl viologen, to recognize N-terminal tryptophan over internal and C-terminal sequence isomers. Here, the binding of Q8 to aromatic peptides in the absence of methyl viologen was studied by isothermal titration calorimetry (ITC), (1)H NMR spectroscopy, and X-ray crystallography. The peptides studied were of sequence X-Gly-Gly, Gly-X-Gly, and Gly-Gly-X (X = Trp, Phe, Tyr, and His). Q8 selectively binds and dimerizes Trp-Gly-Gly (1) and Phe-Gly-Gly (4) with high affinity (ternary K = 10(9)-10(11) M(-)(2)); binding constants for the other 10 peptides were too small to be measured by ITC. Both peptides bound in a stepwise manner, and peptide 4 bound with positive cooperativity. Crystal structures of Q8.1 and Q8.4(2) reveal the basis for selective recognition as simultaneous inclusion of the hydrophobic aromatic side chain into the cavity of Q8 and chelation of the proximal N-terminal ammonium group by carbonyl groups of Q8. The peptide sequence selectivity and positively cooperative dimerization reported here are, to the best of our knowledge, unprecedented for synthetic hosts in aqueous solution. Specific peptide recognition and dimerization by synthetic hosts such as Q8 should be important in the study of dimer-mediated biochemical processes and for the separation of peptides and proteins.     

Design of peptide that recognizes double-stranded DNA.

A novel molecular tool for double-stranded (ds) DNA detection using synthetic peptide is described. The peptide was designed based on the DNA binding domain of the lambda phage CRO repressor (CRO). The designed peptides contain helix-turn-helix (HTH), which is DNA binding motif. A cyclic peptide and a mutant peptide based on CRO were also designed, and the resulting affinity for dsDNA was increased. Furthermore, native amino acids of the peptide were replaced with arginine to increase the affinity for dsDNA. The affinity of these peptides for DNA binding was assessed by surface plasmon resonance (SPR) technique.     

Fine specificity of antigen binding to two class I major histocompatibility proteins (B*2705 and B*2703) differing in a single amino acid residue

Starting from the X-ray structure of a class I majorhistocompatibility complex (MHC)-encoded protein (HLA-B*2705), a naturallypresented self-nonapeptide and two synthetic analogues were simulated in thebinding groove of two human leukocyte antigen (HLA) alleles (B*2703 andB*2705) differing in a single amino acid residue. After 200 ps moleculardynamics simulations of the solvated HLA–peptide pairs, some molecularproperties of the complexes (distances between ligand and protein center ofmasses, atomic fluctuations, buried versus accessible surface areas,hydrogen-bond frequencies) allow a clear discrimination of potent from weakMHC binders. The binding specificity of the three nonapeptides for the twoHLA alleles could be explained by the disruption of one hydrogen-bondingnetwork in the binding pocket of the HLA-B*2705 protein where the singlemutation occurs. Rearrangements of interactions in the B pocket, which bindsthe side chain of peptidic residue 2, and a weakening of interactionsinvolving the C-terminal end of the peptide also took place. In addition,extension of the peptide backbone using a -Ala analogue did notabolish binding to any of the two HLA-B27 subtypes, but increased theselectivity for B*2703, as expected from the larger peptide binding groovein this subtype. A better understanding of the atomic details involved inpeptide selection by closely related HLA alleles is of crucial importancefor unraveling the molecular features linking particular HLA alleles toautoimmune diseases, and for the identification of antigenic peptidestriggering such pathologies.     

Protein ligand design: from phage display to synthetic protein epitope mimetics in human antibody Fc-binding peptidomimetics

Phage display is a powerful method for selecting peptides with novel binding functions. Synthetic peptidomimetic chemistry is a powerful tool for creating structural diversity in ligands as a means to establish structure-activity relationships. Here we illustrate a method of bridging these two methodologies, by starting with a disulfide bridged phage display peptide which binds a human antibody Fc fragment (Delano et al. Science 2000, 287, 1279) and creating a backbone cyclic beta-hairpin peptidomimetic with 80-fold higher affinity for the Fc domain. The peptidomimetic is shown to adopt a well-defined beta-hairpin conformation in aqueous solution, with a bulge in one beta-strand, as seen in the crystal structure of the phage peptide bound to the Fc domain. The higher binding affinity of the peptidomimetic presumably reflects the effect of constraining the free ligand into the conformation required for binding, thus highlighting in this example the influence that ligand flexibility has on the binding energy. Since phage display peptides against a wide variety of different proteins are now accessible, this approach to synthetic ligand design might be applied to many other medicinally and biotechnologically interesting target proteins.     

Binding of a hemoregulatory tetrapeptide by a bis-guanidinium crown ether

A synthetic receptor for the molecular recognition of a tetrapeptide in aqueous buffer was obtained by combining a luminescent crown ether with two pyrrole-guanidinium moieties. The compound interacts with ammonium carboxylates of complementary geometry and binds the hemoregulatory peptide Ac-Ser-Asp-Lys-Pro with K=7×10³ M⁻¹ at physiological pH. Shorter fragments and other tetrapeptides show no or significant reduced affinity. The binding of the target peptide to the functionalized crown ether is signalled by an increase of its emission intensity.     

A Multiple Multicomponent Approach to Chimeric Peptide–Peptoid Podands

The success of multi‐armed, peptide‐based receptors in supramolecular chemistry traditionally is not only based on the sequence but equally on an appropriate positioning of various peptidic chains to create a multivalent array of binding elements. As a faster, more versatile and alternative access toward (pseudo)peptidic receptors, a new approach based on multiple Ugi four‐component reactions (Ugi‐4CR) is proposed as a means of simultaneously incorporating several binding and catalytic elements into organizing scaffolds. By employing α‐amino acids either as the amino or acid components of the Ugi‐4CRs, this multiple multicomponent process allows for the one‐pot assembly of podands bearing chimeric peptide–peptoid chains as appended arms. Tripodal, bowl‐shaped, and concave polyfunctional skeletons are employed as topologically varied platforms for positioning the multiple peptidic chains formed by Ugi‐4CRs. In a similar approach, steroidal building blocks with several axially‐oriented isocyano groups are synthesized and utilized to align the chimeric chains with conformational constrains, thus providing an alternative to the classical peptido‐steroidal receptors. The branched and hybrid peptide–peptoid appendages allow new possibilities for both rational design and combinatorial production of synthetic receptors. The concept is also expandable to other multicomponent reactions.     

Bovine serum albumin as a universal suppressor of non-specific peptide binding in vials prior to nano-chromatography coupled mass-spectrometry analysis

Non-specific binding (NSB) is a well-known problem for any application that deals with ultralow analyte quantities. The modern nano-flow chromatography coupled tandem mass-spectrometry (nanoLC-MS/MS) works with the lowest conceivable analyte concentrations. However, while the NSB problem is widely accepted and investigated for metabolomics and single-peptide medicine-related assays, its impact is not studied for complex peptide mixtures in proteomic applications. In this work peptide NSB to a common plastic autosampler vial was studied for a model mixture of 46 synthetic peptides. A significant NSB level was demonstrated for total peptide concentrations of up to 1 mg mL⁻¹. Different agents were tried for NSB suppression and compatibility with nanoLC-MS/MS analysis: a chaotropic agent, an amino acid mixture, a peptide mixture and a protein solution. The first two were inefficacious. The peptide matrix blocked NSB, however, it also led to analyte ionization suppression in nanoLC-MS/MS. The protein solution (0.1% BSA) efficiently eliminated NSB, while a trap-elute nanoHPLC configuration together with a small-pore reverse-phased sorbent effectively and quantitatively extracted the model peptides and depleted protein material from the sample. Higher protein concentration partially impeded peptide extraction. Thus, the 0.1% BSA solution might be regarded as an effective non-interfering blockader of NSB for sample resuspension and storage in an autosampler prior to LC-MS/MS analysis.     

Monitoring nitrotyrosinylation of a synthetic peptide by capillary zone electrophoresis.

Proteins may be nitrated on tyrosyl residues (nitrotyrosinylated) by the action of reactive nitrogen species in inflamed tissues. Capillary electrophoresis was used to monitor this reaction in a model system with tetranitromethane as the nitrotyrosinylating reagent and a synthetic pentapeptide containing one tyrosine as the target molecule. The reaction was readily followed by capillary electrophoresis performed at pH 8 and, using an absorption wavelength of 436 nm, the signature spectral characteristics of the nitrotyrosinylated peptide were verified on-line. The peak appearance time for the nitrotyrosinylated peptide was more than 1 min longer than that of the starting material and a single main product was observed in contrast to the case when peroxynitrite was used as the nitrotyrosinylating reagent. Capillary electrophoresis appears to be a convenient method for the optimization of nitrotyrosinylation, examination of reaction inhibitors, and for studies of the consequences of nitrotyrosinylation, e.g., for antibody binding and for the function of the target protein or peptide.     

Filaggrin Peptides with β‐Hairpin Structure Bind Rheumatoid Arthritis Antibodies

In the early detection of rheumatoid arthritis (RA) synthetic filaggrin peptides serve as antigens for rheumatoid‐specific autoantibodies (anti‐citrullinated peptide antibody, ACPA) in ELISA tests. In this work we present a peptide that exhibits the binding epitope of ACPA in the form of a stable folding β‐hairpin. The homogeneity of the peptide folding was confirmed by NMR spectroscopy and might lead to the first proposed structure of the antibody‐bound conformation of the epitope.     

Effect of peptide lipidation on membrane perturbing activity: a comparative study on two trichogin analogues

The effect of lipidation on the membrane perturbing activity of peptaibol antibiotics was investigated by performing a comparative study on two synthetic analogues of the natural peptide trichogin GA IV. Both analogues were labeled with a hydrophobic fluorescent probe, but one of them lacked the N-terminal n-octanoyl chain, present in the natural peptide. Spectroscopic studies show that the fatty acyl chain produces two opposite effects: it increases the affinity of the monomeric peptide for the membrane phase, but, at the same time, it favors peptide aggregation in water, thus inhibiting membrane binding by reducing the effective monomer concentration. In the membrane phase the two analogues exhibit the same aggregation and orientation behavior, indicating that the n-octanoyl chain plays no specific role in determining their orientation or membrane perturbing activity. Indeed, the dependence of peptide-induced membrane leakage on total peptide concentration is basically the same for the two analogues, because the aforementioned opposite effects, caused by peptide lipidation, tend to balance. These findings make questionable the use of lipidation as a general method for increasing the peptide membrane-perturbing activity, as its validity seems to be restricted to parent compounds of limited overall hydrophobicity.     

On-column ligand synthesis coupled to partial-filling affinity capillary electrophoresis to estimate binding constants of ligands to a receptor

This paper describes a two-step procedure whereby on-column ligand synthesis and partial-filling affinity capillary electrophoresis (PFACE) are sequentially coupled to each other to determine the binding constants of 9-fluorenylmethoxy carbonyl (Fmoc)-amino acid-D-Ala-D-Ala species to vancomycin (Van) from Streptomyces orientalis. In this technique four separate plugs of sample are injected onto the capillary column and electrophoresed. The initial sample plug contains a D-Ala-D-Ala terminus peptide and two non-interacting standards. Plugs two and three contain solutions of Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester and running buffer, respectively. The fourth sample plug contains an increasing concentration of Van partially-filled onto the capillary column. Upon electrophoresis the initial D-Ala-D-Ala peptide reacts with the Fmoc-amino acid NHS ester yielding the Fmoc-amino acid D-Ala-D-Ala peptide. Continued electrophoresis results in the overlap of the plugs of Van and Fmoc-amino acid-D-Ala-D-Ala peptide and non-interacting markers. Analysis of the change in the relative migration time ratio of the Fmoc-amino acid-D-Ala-D-Ala peptide relative to the non-interacting standards, as a function of the concentration of Van, yields a value for the binding constant. These values agree well with those estimated using other binding and ACE techniques.     

Structure-based design and optimization of antihypertensive peptides to obtain high inhibitory potency against both renin and angiotensin I-converting enzyme

The human renin–angiotensin system (RAS) plays an essential role in regulating blood pressure and systemic vascular resistance. Renin and angiotensin I-converting enzyme (ACE) are two key enzymes in RAS and have long been recognized as attractive antihypertensive targets. Here, a synthetic strategy was proposed integrating quantitative structure–activity relationship (QSAR), molecular dynamics (MD) simulation and binding free energy analysis to discover novel dual renin and ACE peptidic inhibitors. With the strategy a number of candidates were generated virtually, from which eight promising peptides were selected and synthesized for biological assay. Consequently, three peptides (RYLP, YTAWVP and YRAWVL) were successfully identified to have satisfactory inhibitory profile against both renin and ACE with IC₅₀ values of <1 mM and <10 μM, respectively. Structural analysis and energetic dissection revealed different binding modes of peptide to renin and ACE; a peptide only inserts its C-terminus into the active site of ACE, whereas the whole peptide packs tightly against renin. In addition, when limited to structural diversity it is hard to reconcile the renin and ACE inhibitory activities of short peptides such as dipeptides. These findings can be used to guide peptide optimization with improved biological activity.     

Synthetic polypeptide adsorption to Cu-IDA containing lipid films: a model for protein-membrane interactions

Adsorption of synthetic alanine-rich peptides to lipid monolayers was studied by X-ray and neutron reflectivity, grazing incidence X-ray diffraction (GIXD), and circular dichroic spectroscopy. The peptides contained histidine residues to drive adsorption to Langmuir monolayers of lipids with iminodiacetate headgroups loaded with Cu2+. Adsorption was found to be irreversible with respect to bulk peptide concentration. The peptides were partially helical in solution at room temperature, the temperature of the adsorption assays. Comparisons of the rate of binding and the structure of the adsorbed layer were made as a function of the number of histidines (from 0 to 2) and also as a function of the positioning of the histidines along the backbone. For peptides containing two histidines on the same side of the helical backbone, large differences were observed in the structure of the adsorbed layer as a function of the spacing of the histidines. With a spacing of 6 A, there was a substantial increase in helicity upon binding (from 17% to 31%), and the peptides adsorbed to a final density approaching that of a nearly completed monolayer of alpha-helices adsorbed side-on. The thickness of the adsorbed layer (17 +/- 2.5 A) was slightly greater than the diameter of alpha-helices, suggesting that the free, unstructured ends extended into solution. With a spacing of 30 A between histidines, a far weaker increase in helicity upon binding was observed (from 13% to 19%) and a much lower packing density resulted. The thickness of the adsorbed layer (10 +/- 4 A) was smaller, consistent with the ends being bound to the monolayer. Striking differences were observed in the interaction of the two types of peptide with the lipid membrane by GIXD, consistent with binding by two correlated sites only for the case of 6 A spacing. All these results are attributed to differences in spatial correlation between the histidines as a function of separation distance along the backbone for these partially helical peptides. Finally, control over orientation was demonstrated by placing a histidine on an end of the sequence, which resulted in adsorbed peptides oriented perpendicular to the membrane.     

Characterisation by immobilised metal ion affinity chromatographic procedures of the binding behaviour of several synthetic peptides designed to have high affinity for Cu(II) ions.

In this investigation, several peptides containing an increasing number of histidine residues have been designed and synthesised. The peptides involved repeat units of either the pentameric EAEHA or the tetrameric HLLH sequence motifs. Adsorption isotherms for these synthetic peptides and hexahistidine (hexa-His) as a control substance were measured under batch equilibrium binding conditions with an immobilised Cu(II)-iminodiacetic acid (IDA) sorbent. The experimental data were analysed in terms of Langmuirean binding behaviour. In common with previous studies with synthetic peptides, these investigations have demonstrate that the sequential organisation of the histidine side chains in these peptides can affect the selectivity of the coordination interactions with borderline metal ions in immobilised metal ion affinity chromatographic systems. The results also confirm that peptides selected on the basis of their potential to form amphipathic secondary structures with their histidine residues presented on one face of the molecule can exhibit equivalent or higher affinity constants towards copper ions than hexa-His, although they contain fewer histidine residues. These findings are thus relevant to the selection of peptides produced inter alia by combinatorial synthetic procedures to have enhanced binding properties for Cu(II) or Ni(II) ions, or intended for use as peptide tags in the fusion handle approach for the affinity chromatographic purification of recombinant proteins.     

Sequence-specific binding of DNA to liposomes containing di-alkyl peptide nucleic acid (PNA) amphiphiles

We present a method to covalently attach peptide nucleic acid (PNA) to liposomes by conjugation of PNA peptide to charged amino acids and synthetic di-alkyl lipids ("PNA amphiphile," PNAA) followed by co-extrusion with disteroylphosphatidylcholine (DSPC) and cholesterol. Attachment of four Glu residues and two ethylene oxide spacers to the PNAA was required to confer proper hydration for extrusion and presentation for DNA hybridization. The extent of DNA oligomer binding to 10-mer PNAA liposomes was assessed using capillary zone electrophoresis. Nearly all PNAs on the liposome surface are complexed with a stoichiometric amount of complementary DNA 10-mers after 3-h incubation in pH 8.0 Tris buffer. No binding to PNAA liposomes was observed using DNA 10-mers with a single mismatch. Longer DNA showed a greatly attenuated binding efficiency, likely because of electrostatic repulsion between the PNAA liposome double layer and the DNA backbone. Langmuir isotherms of PNAA:DSPC:chol monolayers indicate miscibility of these components at the compositions used for liposome preparation. PNAA liposomes preserve the high sequence-selectivity of PNAs and emerge as a useful sequence tag for highly sensitive bioanalytical devices.