Etude rheologique de gels mixtes de poly(alcool vinylique) et d'alginate de sodium

Snake-cage hydrogels were prepared by the association of poly(vinyl alcohol) (PVA) and sodium alginate. The aim of this work is to study the viscoelastic properties of PVA networks having different molecular weights and trapping alginates of various mannuronate/guluronate ratios, molecular weights and aqueous concentration. The elastic and viscous moduli, G′ and G″, were found to depend on alginate concentration. With the sodium alginate (mannuronate/guluronate =1.78, M̄w=380 000), the elasticity was observed to be independent of the PVA molecular weight in the 7.5% to 10% (w/w) concentration range. Hydrogels elasticity was found to be sodium alginate nature-dependent only in the case of PVA with M̄w =22 000. Moreover, it seems that the viscoelastic parameters G′ and G″ become increasingly insensitive to the nature of sodium alginate as the molecular weight of PVA increases.     

海藻酸钠水溶液的Sol-Gel转变与凝胶化点的决定

测定了 4个分子量和分子量分布不同、M G不同的海藻酸钠试样在不同浓度下的恒温 (2 5℃ )动态粘弹谱 ,发现 4个试样随溶液浓度升高都会发生溶胶 凝胶 (Sol gel)转变 .实验结果表明 ,该转变符合Winter和Chambon的凝胶化点临界状态的松弛模量G(t)方程 ,由tanδ不依赖于ω的判据求出了海藻酸钠水溶液随浓度变化发生Sol gel转变、出现物理凝胶化的凝胶化点溶液浓度cgel和临界指数n .cgel=7 6wt%～ 8 0wt% ,基本与分子量无关 ;分子量较高的 3个试样的n =0 32～ 0 38,而分子量低的试样的n =0 6 1.该结果表明 ,物理凝胶化主要是由大分子重复单元间的相互作用决定 ,分子链越长则凝胶化点的交联结构越完善     

Synthesis and viscoelastic characterization of sulfonated chitosan solutions

In this study, sulfonated chitosan (SCS) with a water-soluble property was synthesized and rheologically characterized. The Maxwell Model can accurately describe a regular chitosan (CS) solution. The G′, G″ crossover shifted toward lower frequencies as the CS concentration increased, revealing an increase of relaxation time. A frequency–concentration superposition master curve of CS solution was therefore plotted and well fitted by the experiment result. However, a modified Maxwell Model, which captures the occurrence of the quasi-plateau region of G′ in the low-frequency range, representing the initially falsely connected structure between the sulfonic acid groups and the protonated ammonium groups, was proposed for the SCS solution. The crossover of G′ and G″ was found to be independent of the SCS concentration, indicating its lower molecular weight yields a high overlap concentration, Ce. The rheological properties of SCS solutions can be affected as the following factors are increased in the order of declining effect; pH level > temperature > salt concentration.     

不同分子量可德胶水悬浮液的粘弹性研究

采用动态粘弹性测量研究了不同分子量的生物大分子可德胶 (Curdlan)水悬浮液 (ASC)的流变学特性 .室温下观察到ASC具有弹性 (Solid like)行为 ,储能模量G′在测量范围内轻微依赖频率 ,而损耗模量G″和损耗角正切tanδ存在最小值 .ASC粘弹性随可德胶分子量和浓度的增加而增强 .ASC的流动特性符合Herschel Bulkley模型 ;其弹性行为可以通过渗流理论的标度弹性模型来描述 .网络结构是由于可德胶颗粒聚集或絮凝而形成的 ,当可德胶含量超过临界浓度cs=0 3 %时 ,弹性模量G′与可德胶浓度存在标度关系G′=Goεt,其中标度指数t=2 5 4.     

Thermal behavior,dynamic mechanical properties and rheological properties of poly(butylene succinate) composites filled with nanometer calcium carbonate

PBS/nano-CaCO₃ composites with various nano-CaCO₃ weight fractions were prepared by melt blending. The thermal behavior, dynamic mechanical properties and rheological properties of the composites were investigated. DSC measurements revealed that the nano-CaCO₃ particles had little influence on the crystallization and melting behavior of PBS. Thermogravimetric analysis showed that the introduction of nano-CaCO₃ tended to improve the thermal stability of PBS. Dynamic mechanical analysis showed that the G′ and G″ of the PBS/nano-CaCO₃ composites were improved significantly when the nano-CaCO₃ content was not more than 3wt%, while the G′ and G″ were mainly decided by the PBS matrix when the nano-CaCO₃ content exceeded 3wt%. Rheological results showed that G′ < G″ over the frequency range, illustrating the viscous behavior of the samples. The η* of all the samples remained almost constant when the frequency was not more than 0.25 rad/s, which showed the characteristic of a Newtonian fluid. A strong shear thinning effect was observed for all the samples when the frequency exceeded 0.25 rad/s. Furthermore, the microstructure and the relaxation mechanism of the PBS/nano-CaCO₃ composites mainly depended on the PBS matrix.     

Relaxation characteristics and intrinsic birefringence and viscosity of polystyrene solutions for a wide range of molecular weights

A comparison is made between measurements on polystyrene solutions and the relaxation characteristics and intrinsic birefringence and viscosity given by the theory for the flexible Gaussian chain of variable number of segments and with internal viscosity and internal hydrodynamic interaction. This is done in order to determine the applicability of the theory to polymers over a wide range of molecular weights, including the low molecular weight range in which there may be conflict with the theoretical assumption of chains having a large number of segments. The longest, terminal relaxation time and the number of chain segments are determined from measurements of the frequency dependence of oscillatory flow birefringence while the intrinsic birefringence and viscosity are determined from steady flow measurements. The range of molecular weights studied is from approximately 900 at 10⁶. It is found that the segment weight is approximately 1000 and the number of segments is in direct proportion to the molecular weight for the range from 1 to 1000 segments. The terminal relaxation time has a molecular weight dependence of the type given by the theory but with better agreement for higher molecular weights. While the measured dependences of the intrinsic viscosity and birefringence are in agreement with theory for molecular weights greater than 5 × 10⁴, they deviate significantly for molecular weights below 1 × 10⁴. The ratio of the intrinsic birefringence to intrinsic viscosity, which in theory is a constant independent of molecular weight, is found to change at the lower molecular weights.     

Diffusion-viscometric analysis and conformational characteristics of sodium polystyrenesulfonate molecules

Samples of sodium polystyrenesulfonate of molecular weights varying in a 20-fold range were synthesized. The hydrodynamic behavior of the samples was studied in a 0.2 M NaCl solution in which the initial polyelectrolyte effects are suppressed. Relationships between the molecular weight and the translational friction coefficient and intrinsic viscosity were obtained. The theory describing the hydrodynamic behavior of wormlike chains with taking into account both the percolation effects and the excluded-volume effects was applied to estimation of the length of the statistical segment and the cross section of the sodium polystyrenesulfonate molecules in 0.2 M NaCl solution.     

气相生长碳纤维填充聚苯乙烯的熔体动态流变行为

采用修正的两相模型讨论加工条件对不同体积分数(ψ=0～0.05)气相纳米碳纤维(VGCF)填充聚苯乙烯(PS)熔体(200℃)频率(ω)依赖性动态流变的影响.与弱剪切条件(190℃;30 r/min-5 min)下所制备的材料相比,VGCF在强剪切条件(190℃;120 r/min-10 min)下所制备材料中分散均匀,“粒子相”应变放大因子A,(ψ)较低,而松弛指数n较高.将应变(γ)依赖性G″(ω,ψ)应变放大因子A,(ψ,γ)与“粒子相”特征模量G″fψ(,γc),G″f(ψ,γc)引入两相模型,讨论加工条件对γ依赖性非线性流变行为的影响.研究结果表明,两相模型可定量讨论填充熔体动态流变行为.加工条件影响VGCF在基体中的分散性,但不影响“粒子相”弹性贡献R′f(ψ)与n的关系、G′f(ψ,γc)与非线性应变幂律指数x的关系以及G″f(ψ,γc)与非线性应变幂律指数y的关系,说明“粒子相”对填充熔体黏弹性的贡献与其弛豫特性及结构稳定性密切相关.     

Terpyridines as supramolecular initiators for living polymerization methods

Bis(5,5″-bis(bromomethyl)-2,2′:6′,2″-terpyridine), bis-4′-(4-bromomethylphenyl)-2,2′:6′,2″-terpyridine and 4-hydroxymethyl-5′,5″-dimethyl-2,2′:6′,2″-terpyridine metal complexes have been used as initiators for the living polymerization of 2-oxazolines and L-lactides. In both cases polymers with controlled molecular weights and narrow molecular weight distributions have been obtained. In-line diode array GPC measurements of iron(II) complexed poly(ethyloxazoline)s showed an unexpected absence of fragmentation. Viscosity experiments demonstrated the differences of the complexed and uncomplexed systems.     

多壁碳纳米管填充聚苯乙烯熔体的恒温依时性动态模量逾渗行为

在恒温(170～190℃)热处理过程中,多壁碳纳米管(MWCNTs)填充聚苯乙烯(PS)熔体发生动态模量逾渗(DMP)行为,且该行为服从时-温叠加(TTS)原理.MWCNTs体积分数(φ)低于逾渗阈值(φc)时,填充熔体在恒温热处理过程中保持类液行为,热处理对MWCNTs分散状态无显著影响,动态储能模量(G')与动态损耗模量(G″)活化能(EG'与EG″)分别高于、低于PS黏流活化能(Eω),而与PS熔体恒频动态模量活化能相一致;φ>φc时,热处理促成MWCNTs进一步团聚,填充熔体在热处理过程中发生类液-类固转变,EG'与EG″均低于Eω,而动态逾渗时间活化能(Et'与Et″)显著高于Eω且随φ增高而增大.在逾渗转变区,EG'与EG″发生不连续变化.PS/MWCNTs复合体系的恒温依时DMP行为与MWCNTs聚集所导致的三维弹性网络的形成密切相关,PS大分子终端松弛不是决定DMP的关键因素.     

Synthesis and characterization of polythiophene derivatives with nitrogen heterocycles on the side chain

The Grignard metathesis reaction of 2,5‐dibromo‐3‐(5′‐hexylpyridine‐2′‐yl)thiophene ( M1 ) with i‐PrMgCl afforded 5‐bromo‐2‐chloromagnesio‐3‐(5′‐hexylpyridine‐2′‐yl)thiophene ( GM1 ) in the 86% selectivity. The Kumada coupling polymerization by Ni(dppp)Cl₂ gave poly M1 having the roughly controlled molecular weight between 6700 and 23,400. The characterization using the gel permeation chromatographic and matrix‐assisted laser desorption/ionization‐time of flight mass spectra indicated the diffusion of the nickel catalyst from the propagating end. Based on the GC and ¹H NMR spectra, the head‐to‐tail content of poly M1 was calculated to be 89%. The regioselective Grignard metathesis reactions of 5,5′‐dibromo‐4‐(5″‐hexylpyridine‐2″‐yl)‐2,2′‐bithiophene ( M2 ) and 5,5′‐dibromo‐4‐(5″‐hexylpyrimidine‐2″‐yl)‐2,2′‐bithiophene ( M3 ) also occurred at the ortho‐position of the nitrogen heterocycle. The Kumada coupling polymerizations gave poly M2 and poly M3 having the head‐to‐tail content of 75% and 85%, respectively. The UV–vis spectra of polymers suggested that the polymer conformation becomes more planar in the order of poly M1 < poly M3 < poly M2 , which was investigated by the theoretical calculation of the model oligomers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2166–2174     

Influence of multiwall carbon nanotube on physical properties of poly(ethylene 2,6‐naphthalate) nanocomposites

Polymer nanocomposites consisting of multiwall carbon nanotube (MWCNT) and poly(ethylene 2,6‐naphthalate) (PEN) were prepared by a melt blending process in a twin‐screw extruder. The storage modulus (G′) and loss modulus (G″) of the PEN/MWCNT nanocomposites increased with increasing frequency, and this increment being more significant at low frequency. The terminal zone slope of G′ for the PEN/MWCNT nanocomposites decreased with increasing MWCNT content, and the nonterminal behavior of those was related to the dominant nanotube–nanotube interactions at higher MWCNT content, leading to the formation of the interconnected or network‐like structures of MWCNT in the polymer nanocomposites. The decrease in the slope of the plot of log G′ versus log G″ for the PEN/MWCNT nanocomposites with increasing MWCNT content suggested the changes in the microstructures of the polymer nanocomposites by incorporating MWCNT. The incorporation of very small quantity of MWCNT significantly improved the mechanical properties of the PEN/MWCNT nanocomposites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1062–1071, 2006     

Dynamic mechanical properties of moderately concentrated polystyrene solutions

The storage (G′) and loss (G″) shear moduli have been measured in the frequency range from 0.04 to 630 Hz for solutions of narrow distribution polystyrenes with molecular weights (M) 19,800 to 860,000, and a few of poly(vinyl acetate), M = 240,000. The concentration (c) range was 0.014–0.40 g/ml and the viscosities of the solvents (diethyl phthalate and chlorinated diphenyls) ranged from 0.12 to 70 poise. Data at different temperatures (0–40°C) were combined by the method of reduced variables. Two types of behavior departing from the usual frequency dependence describable by the Rouse-Zimm-Tschoegl theories were observed. First, for M ? 20,000, the ratio (G″ ? ωη_s)/G′ in the neighborhood of ωτ₁ = 1 was abnormally large and the steady-state compliance J was abnormally small, especially at the lowest concentrations studied. Here ω is circular frequency, η_s solvent viscosity, and τ₁ terminal relaxation time. Related anomalies have been observed by others in undiluted polymers at still lower molecular weights. Second, at the highest concentrations and molecular weights, a “crossover” region of the logarithmic frequency scale appeared in which G″ ? ωη_s < G′. The width of this region is a linear function of log c; the frequency dependence under these conditions can be represented by a sequence of Rouse relaxation times grafted on to a sequence of Zimm relaxation times. For each molecular weight, the terminal relaxation time τ₁ was approximately a single function of c for different solvents of widely different η_s. At lower concentrations, τ₁ was close to the Rouse prediction of 6ηM/π²cRT, where η is the steady-flow viscosity; but at higher concentrations, τ₁ was proportional to η/c² and corresponded, according to a recent theory of Graessley, to an average molecular weight of 20,000 between entanglement coupling points in the undiluted polymer.     

Extent of branching from linear viscoelasticity of long‐chain‐branched polymers

We present new results and examine literature data concerning the linear viscoelastic behavior of polyethylene with sparse to intermediate levels of long‐chain branching (LCB). These branched polymers displayed a common rheological signature, namely, a region of frequency‐independent loss tangent along with the corequisite scaling of the storage and loss moduli to the same frequency exponent. This apparent power‐law response occurred within a finite frequency window and bore resemblance to the behavior of physical gels. The appearance of this region, however, was the consequence of the presence of two distinct, yet partially overlapping, terminal relaxation processes. After considering the analogous relaxation behavior of wholly linear polymers with bimodal molecular weight distributions, we considered the polymers with LCB as blends of linear and branched species to develop a simple method of quantifying the extent of LCB. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1671–1684, 2004     

多壁碳纳米管填充聚苯乙烯复合体系的动态流变特性

应用两相模型探讨多壁碳纳米管(MWCNTs)填充聚苯乙烯(PS)复合体系的动态流变特性.结果表明,体系线性黏弹行为与PS本体的应变放大效应及MWCNTs填料相的弛豫密切相关.在不同温度下,应变放大因子(Af)随MWCNTs体积分数(φ)的变化规律符合扩散控制的粒子串聚集(CCA)模型.φ＜0.020时,MWCNTs分散...     

Oscillatory shear experiments as criteria for potential vitreous substitutes

Polymers of N-vinyl-2-pyrrolidinone were synthesized as potential substitutes for the vitreous body of the eye. Certain polymers displayed typical gel behaviour and they were further characterized by dynamic shear analysis. The mechanical spectra of the fully hydrated samples indicated a covalently crosslinked network system i.e. G′ > G″ and slopes approaching zero. The gels were also subjected to preshearing by injection through a small needle, a procedure that is essential in the use of vitreous substitutes. The polymers crosslinked with ethylene dimethacrylate dramatically changed their characteristics following the injection process, as the values of shear moduli dropped substantially, and the gels behaved like free flowing fluids at higher frequencies (G″ > G′). The gels crosslinked with diallyl ether or divinyl glycol displayed only minor changes in their viscoelastic behaviour, but their moduli were very low before and after injection. The gels that were produced without crosslinking agents maintained their properties as virtually unchanged after injection, with no changes in the magnitude of G′ and G″ and no rise in the loss tangent. These gels, which may be very lightly chemically crosslinked, due to divinyl contaminants, or physically crosslinked, displayed the most suitable mechanical characteristics as vitreous substitutes. Shear oscillatory tests appear as important criteria in the selection of such materials.     

Dielectric properties of some semiconducting polyazophenylenes

The dielectric properties of a series of semiconducting polyazophenylenes were studied as a function of temperature and molecular weight in the temperature range 293–600°K and for molecular weights between 5,100 and 62,800 at a constant frequency of 1 kHz. The compounds studied included poly-2,4-diaminotoluene, poly-2,4-diaminoanisole, and poly-2,5-diaminotoluene. The dielectric properties are presented in the usual way in terms of a complex dielectric constant ε^* = ε′—jε″. Activation energies of relaxation processes were evaluated from the areas and widths of the dielectric loss factor, ε″, against reciprocal temperature at constant frequency. The dielectric activation energies were found to be roughly equal to the activation energies from the DC conductivity. This indicates that the conduction mechanism is based on rotational movements of molecules or parts of molecules.     

Linear viscoelastic behavior of chitosan films as influenced by changes in the biopolymer structure

Films were prepared via solvent casting from different deacetylated and depolymerized chitosans obtained from β‐chitin. The linear viscoelastic behavior of the chitosan films was studied with uniaxial tensile stress–relaxation tests. All stress–relaxation profiles exhibited an asymptotically decaying trend, with a residual value different from zero, thus pointing out a solid‐like, viscoelastic behavior. The decay of the tensile modulus with time was phenomenologically described by a generalized Maxwell model consisting of three exponential functions and an equilibrium elastic modulus. Films prepared from chitosans with higher molecular weights showed higher residual elastic moduli and longer relaxation times. Within the range of the degrees of acetylation analyzed (0–27%), chitosans with the lowest and highest degrees of acetylation exhibited more pronounced solid‐like character. This behavior is explained on the basis of a complex balance between steric effects, types of intermolecular interactions, and aggregation of the chitosan samples. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1907–1915, 2007     

Behavior of sodium polyacrylate hydrogels in copper sulfate solutions

The behavior of hydrogels based on sodium acrylate cross-linked to different extents with N,N′-methylenebis(acrylamide) was examined in aqueous solutions of copper sulfate of concentrations within 0.1–0.001 M.     

Shear rheology of micro-fibrillar cellulose aqueous suspensions

Micro-fibrillar cellulose aqueous suspensions with different fiber lengths were prepared by mechanical refining of softwood pulp fiber suspensions at different specific refining energies. Effects of refining energy level, micro-fiber concentration and temperature on the rheological properties of these aqueous suspensions were studied. These microfibers form a three-dimensional network, which displays typical shear-thinning behavior with little thixotropic tendency, at concentrations as low as 0.5 wt%. A viscoelastic analysis showed that these micro-fibrillar cellulose suspensions at different concentrations (from 0.5 to 2 wt%) exhibit a viscoelastic gel-like behavior [G′ > G″ over an extended range of frequencies (ω) and a weak dependency of G′ on ω] at 25 °C. The storage modulus, G′, at 1 rad/s increased strongly upon increasing concentration from 0.5 to 2 wt% following a power law with an exponent of 3.2. However, increasing the temperature decreases the storage modulus, G′, due to weakening or disruption of intermolecular interactions at elevated temperatures. The viscoelastic behavior changes to liquid-like, with G″ > G′ at the investigated frequency range, for the suspensions at 85 °C.