Promotion effects of optical antipodes on the formation of helical fibrils: chiral perfluorinated gelators

A chiral gelator, RR- or SS-N,N'-diperfluorooctanoyl-1,2-diaminocyclohexane, gelated racemic 2-butanol. The gel was most stable at the racemic mixture, its stability lowered with the increase in the optical purity of the gelator. Notably, characteristic helically coiled fibrils were formed in the narrow region of enantiomer excess (ee = 0.2-0.4). Promotion effects of the antipodal enantiomers are proposed.     

Multiple inverse isotope dilution assay for the stereospecific quantitative determination of R(-) and S(+)-oxaprotiline in biological fluids

An isotope dilution assay for the determination of both oxaprotiline enantiomers in biological samples after administration of the racemic mixture has been developed. The enantiomers were reacted with synthetically prepared, optically pure N-trifluoroacetyl-S(-)-prolyl chloride, followed by high-performance liquid chromatographic separation of the diastereoisomers formed. Quantitation was performed by on-line UV detection at 260 nm and off-line radiometry by liquid scintillation counting. Endogenous compounds and metabolites do not interfere in the assay. Analysis of water and the blood and urine of rats spiked with [14C]oxaprotiline X HCl showed recoveries for S(+)-oxaprotiline X HCl (mean +/- coefficient of variation, n = 4-6) of 98.0 +/- 1.0% (water), 100.5 +/- 0.6% (blood) and 101.5 +/- 2.0% (urine), and for R(-)-oxaprotiline X HCl of 101.3 +/- 2.0% (water), 102.2 +/- 2.1% (blood) and 103.2 +/- 0.2% (urine). A pilot study to determine blood levels of the two enantiomers in two rats dosed with racemic [14C]oxaprotiline X HCl (10 mg/kg i.v.) was carried out to test the method. The results indicated stereoselective disposition of oxaprotiline enantiomers in the rat. The ratio of the areas under the blood concentration curves for R(-)-to S(+)-oxaprotiline X HCl was 1.14.     

Determination of the 2,3-pentadienedioic acid enantiomer interconversion energy barrier 1. Classical kinetic approach

A classical kinetic method was used to determine the energy barrier for the inter-conversion of 2,3-pentadienedioic acid enantiomers. Each individual enantiomer was isolated by collecting the appropriate peaks from the HPLC enantiomeric separation, of racemic 2,3-pentadienedioic acid. The isolated enantiomers were racemized at 22 degrees C using various interconversion times. The ratio of enantiomers in each reaction solution was determined by HPLC at 22 degrees C. The corresponding peak areas of the enantiomers and the interconversion times obtained from the HPLC chromatograms were used to calculate both the interconversion rate constants describing (+)--> (-) and (-) --> (+) interconversions as well as the energy barriers. It was confirmed that the interconversion of 2,3-pentadienedioic acid enantiomers is a firstorder kinetic reaction. Both semiempirical and ab initio methods were used to explore the mechanism of the interconversion of 2,3-pentadienedioic acid enantiomers, and to calculate the interconversion energy barrier. Comparison of the interconversion energy barriers found by the ab initio method (deltaG# = 110.7 kJ/mol) and by classical kinetics in the mobile phase solution at 22 degrees C (delta Gapp = 93.9+/-0.2 kJ/mol) shows a difference which may be attributed to the different conditions assumed in the theoretical calculation (i.e., a gaseous state) and the actual experimental conditions (i. e., liquid solution) and a possible catalytic effect of the solution composition.     

Enantioselective crystallization of histidine on chiral self-assembled films of cysteine

In this paper, the preparation and use of chiral surfaces derived from enantiomerically pure crystals of amino acids are described. For this purpose, a self-assembly process to grow thin chiral films of (+)-L- or (-)-D-cysteine on gold surfaces was chosen. These chiral films were utilized as crystallization catalysts in the crystallization of enantiomers from solutions. To demonstrate the chiral discrimination power of the chiral surfaces in crystallization processes, the crystallization of racemic histidine onto the chiral films was investigated. Our study demonstrates the potential application of chiral films to control chirality throughout crystallization, where one enantiomer crystallizes onto the chiral surfaces with relative high enantiomeric excess. In addition, crystallization of pure histidine enantiomers onto chiral films results in strong crystal morphology modification with preferred orientation.     

Validation of a high-performance liquid chromatographic method for the enantiospecific quantitation of zopiclone in plasma

Zopiclone is a hypnosedative with clinical effects similar to benzodiazepines but thought to have less potential for rebound insomnia and withdrawal effects. Zopiclone is administered as a racemic mixture, and an enantiospecific method of analysis of zopiclone in plasma is desirable in the study of pharmacokinetic drug interactions. We report a modification of an HPLC method reported by Foster et al. using a closely related structural analogue of zopiclone as internal standard. Zopiclone was detected at 306 nm and linear calibration curves were constructed in the range of 1.0-250 ng/mL for each enantiomer. The % CV at 2.5 ng/mL was 12.0% for (-)-zopiclone and 14.3% for (+)-zopiclone, and the limit of quantification of each enantiomer was 2.5 ng/mL. At higher concentrations, the coefficient of variation was less than 10%. The nominal concentration of quality control samples was predicted with an accuracy within a range of +/-11.6%. The method was used in the analysis of plasma obtained from psychiatric patients. One sample obtained following a non-fatal overdose with zopiclone contained the metabolites (-)-N-oxide zopiclone and both enantiomers of desmethyl zopiclone. The metabolite enantiomers were resolved on the column with retention times similar to zopiclone. The N-oxide metabolite co-eluted with internal standard.     

Chiral Phosphoric Acid Catalyzed Kinetic Resolution of Indolines Based on a Self‐Redox Reaction

A strategy for oxidative kinetic resolution of racemic indolines was developed, employing salicylaldehyde derivative as the pre‐resolving reagent and chiral phosphoric acid as the catalyst. The iminium intermediate, formed by the condensation reaction of an enantiomer of indoline with salicylaldehyde derivative, was hydrogenated by the same enantiomer of indoline to afford another enantiomer of indoline by a self‐redox mechanism. The oxidative kinetic resolution of 2‐aryl‐substituted indolines proceeded to give enantiomers in good yields with excellent enantioselectivities.     

Expression of molecular chirality and two-dimensional supramolecular self-assembly of chiral, racemic, and achiral monodendrons at the liquid-solid interface

We have investigated the two-dimensional ordering of chiral and achiral monodendrons at the liquid-solid interface. The chiral molecules self-assemble into extended arrays of dimers. As expected, the R enantiomer forms the mirror image type pattern of the chiral two-dimensional structure formed by the S enantiomer. A racemic mixture applied from solution onto the substrate undergoes spontaneous segregation: the enantiomers separate on the surface and appear in different domains. In contrast to the chiral molecules, the achiral analogue self-assembles into cyclic tetramers. Moreover, the pattern formed by the achiral molecule strongly depends on the solvent used. In the case of 1-phenyloctane, solvent molecules are coadsorbed in a 2:1 (dendron:solvent) ratio whereas in 1-octanol, no solvent molecules are coadsorbed. By the appropriate solvent choice, the distance between the potential "supramolecular containers" can be influenced.     

On the thermal behaviour of acetylphenyl-hydroxyaceticacid-4-nitrobenzyl esters

The 4-nitrobenzyl ester of acetylphenylhydroxyacetic acid differs in its melting behaviour from other nitrobenzyl esters of phenylhydroxyacetic or acetylphenylhydroxyacetic acids, the racemate having a higher melting point than the enantiomers. By means of thermal analysis, IR spectroscopy and X-ray diffractometry the ester can be shown to occur in two crystalline modifications. In the process of solidification of the molten mass, at first a modification of higher energy is formed, obviously being caused by an excess of one enantiomer, which is then exothermally rearranged in the lattice of the racemate.     

Enantiomeric resolution of N,N'-dimethyldithiodianthranilide through diastereomeric silver(I) complex. Circular dichroism spectra, racemization barrier, and molecular self-assembly

Planar chiral N,N'-dimethyldithiodianthranilide (2b) was resolved to enantiomers through a diasteromeric complex with easily accessible silver(I) (1S)-camphorosulfonate (3). The (-)-2b enantiomer was assigned the R absolute configuration from the X-ray crystal structure of the silver complex. The compound is configurationally stable and its racemization occurs through boat-to-boat ring inversion (DeltaG(double dagger) = 36.5 +/- 0.2 kcal mol(-1) at 438 K). The analysis of the CD spectrum of the title compound showed that the n-pi* Cotton effect sign is determined by the helicity of the skewed thiobenzamide chromophore. The molecules of 2b are unable to achieve efficient crystal packing by themselves and easily form inclusion complexes with toluene or pentafluorophenol.     

Gas chromatographic determination of the interconversion energy barrier for dialkyl 2,3-pentadienedioate enantiomers

The enantiomers of dialkyl 2,3-pentadienedioate undergo interconversion during gas chromatographic separation on chiral stationary phases. In this paper the on-column apparent interconversion kinetic and thermodynamic activation data were determined for dimethyl, diethyl, propylbutyl and dibutyl 2,3-pentadienedioate enantiomers by gas chromatographic separation of the racemic mixtures on a capillary column containing a polydimethylsiloxane stationary phase coupled to 2,3-di-O-methyl-6-O-tertbutyldimethylsilyl-beta-cyclodextrin. A deconvolution method was used to determine the individual enantiomer peak areas and retention times that are needed to calculate the interconversion rate constants and the energy barriers. The apparent rate constants and interconversion energy barriers decrease slightly with an increase in the alkyl chain length of the dialkyl 2,3-pentadienedioate esters. The optimum conformation of the dialkyl 2,3-pentadienedioate molecules, their separation selectivity factors and apparent interconversion enthalpy and entropy data changes with the alkyl chain length. The dependence of the apparent interconversion energy barrier (deltaG(app)(a-->b), deltaG(app)(b-->a)) on temperature was used to determine the apparent activation enthalpy (deltaH(app)(a-->b), deltaH(app)(b-->a)) and apparent entropy (deltaS(app)(a-->b), deltaS(app)(a-->b)) (where a denotes the first and b second eluted enantiomer). The comparison of the activation enthalpy and entropy (deltaS(app)(a-->b), deltaS(app)(a-->b)) indicated that the interconversion of dialkyl 2,3-pentadienedioate enantiomers on the HP-5+Chiraldex B-DM column series is an entropy driven process at 160 degrees C. Data obtained for dimethyl 2,3-pentadienedioate enantiomers on the HP-5+Chiraldex B-DM column series at 120 degrees C (deltaG(app)(a-->b) = 123.3 and deltaG(app)(b-->a) = 124.4 kJ mol(-1)) corresponds (at the 95% confidence interval) with the value of deltaG(#) = 128+/-1 kJ mol(-1) found at this temperature by gas chromatography using a two-dimensional stop flow technique on an empty capillary column [V. Schurig, F. Keller, S. Reich, M. Fluck, Tetrahedron: Asymmetry 8 (1997) 3475].     

Enantiomeric separation and discrimination of 2-hydroxy acids as O-trifluoroacetylated (S)-(+)-3-methyl-2-butyl esters by achiral dual-capillary column gas chromatography

An efficient method is described for the simultaneous enantiomeric separation of 18 different racemic 2-hydroxy acids for the determination of their absolute configurations. It involves the conversion of each enantiomer into a diastereomeric O-trifluoroacetylated (S)-(+)-3-methyl-2-butyl ester for the direct separation by achiral dual-capillary column gas chromatography with subsequent identification and determination of its chirality by retention index (I) library matching. The enantiomers of each acid were well separated with high resolution values (R > or = 1.4) on DB-5 and DB-17 columns of different polarity. When temperature-programmed I values of 2-hydroxy acid enantiomers as their diastereomeric derivatives were measured on both columns, the I values were characteristic of each enantiomer. Simple I matching with the reference values was thus useful in cross-checking each acid enantiomer for the identification and chiral discrimination. When applied to urine samples, the present method allowed positive identification of most of the spiked 2-hydroxy acids from normal urine and for endogenous (S)-lactic acid and (S)-2-hydroxybutyric acid from a clinical urine specimen.     

Disappearing Enantiomorphs: Single Handedness in Racemate Crystals

Although crystallization is the most important method for the separation of enantiomers of chiral molecules in the chemical industry, the chiral recognition involved in this process is poorly understood at the molecular level. We report on the initial steps in the formation of layered racemate crystals from a racemic mixture, as observed by STM at submolecular resolution. Grown on a copper single‐crystal surface, the chiral hydrocarbon heptahelicene formed chiral racemic lattice structures within the first layer. In the second layer, enantiomerically pure domains were observed, underneath which the first layer contained exclusively the other enantiomer. Hence, the system changed from a 2D racemate into a 3D racemate with enantiomerically pure layers after exceeding monolayer‐saturation coverage. A chiral bias in form of a small enantiomeric excess suppressed the crystallization of one double‐layer enantiomorph so that the pure minor enantiomer crystallized only in the second layer.     

Stereospecific high-performance liquid chromatographic assay of pirprofen enantiomers in rat plasma and urine.

A stereospecific high-performance liquid chromatographic method was developed for the assay of pirprofen enantiomers in rat plasma and urine. Following addition of internal standard (ketoprofen) and acidifier (L-ascorbic acid) to biological fluids, pirprofen was extracted into an isopropanol-isooctane (5:95) mixture. Diastereomers of pirprofen enantiomers, which were formed using L-leucinamide, were separated on a reversed-phase column with ultraviolet detection at 275 nm using 0.06 M KH2PO4-acetonitrile-triethylamine (64:36:0.1) as mobile phase. The limit of quantitation was 0.1 microgram/ml for each enantiomer, based on 100 microliters of rat plasma. No spontaneous oxidation of pirprofen to its pyrrole metabolite occurred during sample preparation and analysis. In three female rats which were dosed with 10 mg/kg racemic pirprofen orally, plasma concentrations of the enantiomers could be followed for 24 h. Pirprofen enantiomers in plasma were virtually unconjugated, and negligible concentrations of pyrrole metabolites were observed. Less than 10% of the total dose was recovered in urine as intact drug and its glucuroconjugates. The assay was found suitable for the study of the pharmacokinetics of pirprofen enantiomers in the rat.     

Achiral and chiral high-performance liquid chromatographic determination of flubendazole and its metabolites in biomatrices using UV photodiode-array and mass spectrometric detection

Flubendazole, methyl ester of [5-(4-fluorobenzoyl)-1H-benzimidazol-2-yl]carbamic acid, belongs to the group of benzimidazole anthelmintics, which are widely used in veterinary and human medicine. The phase I flubendazole biotransformation includes a hydrolysis of the carbamoyl methyl moiety accompanied by a decarboxylation (hydrolysed flubendazole) and a carbonyl reduction of flubendazole (reduced flubendazole). Flubendazole is a prochiral drug, hence a racemic mixture is formed during non-stereoselective reductions at the carbonyl group. Two bioanalytical HPLC methods were developed and validated for the determination of flubendazole and its metabolites in pig and pheasant hepatic microsomal and cytosolic fractions. Analytes were extracted from biomatrices into tert-butylmethyl ether. The first, achiral method employed a 250 mm x 4 mm column with octylsilyl silica gel (5 microm) and an isocratic mobile phase acetonitrile-0.025 M KH(2)PO(4) buffer pH 3 (28:72, v/v). Albendazole was used as an internal standard. The whole analysis lasted 27 min at a flow rate of 1 ml/min. The second, chiral HPLC method, was performed on a Chiralcel OD-R 250 mm x 4.6 mm column with a mobile phase acetonitrile-1 M NaClO(4) (4:6, v/v). This method enabled the separation of both reduced flubendazole enantiomers. The enantiomer excess was evaluated. The column effluent was monitored using a photodiode-array detector (scan or single wavelength at lambda=246 nm). Each of the analytes under study had characteristic UV spectrum, in addition, their chemical structures were confirmed by high-performance liquid chromatography-mass spectrometry (HPLC-MS) experiments. Stereospecificity in the enzymatic carbonyl reduction of flubendazole was observed. While synthetic racemic mixture of reduced flubendazole was separated to equimolar amounts of both enantiomers, practically only one enantiomer was detected in the extracts from all incubates.     

Anti-fouling chemistry of chiral monolayers: enhancing biofilm resistance on racemic surface

This work reports the resistance to protein adsorption and bacterial biofilm formation by chiral monolayers of polyol-terminated alkanethiols surrounding micrometer-sized patterns of methyl-terminated alkanethiols on gold films. We discover that patterned surfaces surrounded by chiral polyol monolayers can distinguish different stages of biofilm formation. After inoculation on the surfaces, bacteria first reversibly attached on the chiral polyol monolayers. Over time, the bacteria detached from the polyol surfaces, and attached on the hydrophobic micropatterns to form biofilms. Interestingly, while both enantiomers of gulitol- and mannonamide-terminated monolayer resisted adsorption of proteins (bovine serum albumin, lysozyme, and fibrinogen) and confined biofilms formed on the micropatterns, the monolayers formed by the racemic mixture of either pair of enantiomers exhibited stronger antifouling chemistry against both protein adsorption and biofilm formation than monolayers formed by one enantiomer alone. These results reveal the different chemistries that separate the different stages of biofilm formation, and the stereochemical influence on resisting biofoulings at a molecular-level.     

New derivatives of cyclodextrins as chiral selectors for the capillary electrophoretic separation of dichlorprop enantiomers

-, β- and γ-cyclodextrins (CDs), as well as some of their chemical derivatives, have been tested as chiral resolving agents for the capillary zone electrophoretic resolution of the racemic herbicide dichlorprop, (±)-2-(2,4-dichlorophenoxy)propionic acid, of which only the (+)-isomer is herbicidally active. The complexation constants of the herbicide enantiomers with the cyclodextrin host molecules have been calculated from the electrophoretic migration time data at variable cyclodextrin concentration. The experimental results showed that several of the investigated CDs allowed dichlorprop enantiomer resolution. In particular, a newly synthesised ethylcarbonate derivative of β-CD showed the best enantiomer resolution properties among the tested compounds, while the remaining ones showed inferior or no performances at all. The calculated inclusion constants allowed identification of the best conditions for enantioresolution, and an explanation of the different complexation properties of the investigated compounds has been proposed on the basis of molecular modeling.     

Homochiral conglomerates and racemic crystals in two dimensions: tartaric acid on Cu(110)

Two-dimensional lattice structures formed by racemic tartaric acid on a single crystalline Cu(110) surface have been studied and compared with the enantiopure lattices. At low coverage, the doubly deprotonated bitartrate species is separated into two-dimensional conglomerates showing opposite enantiomorphism. At higher coverage, however, a singly deprotonated monotartrate species forms a heterochiral, racemic crystal lattice. While the enantioseparated bitartrate system undergoes decomposition at the same temperature as the enantiopure system, the racemic monotartrate lattice has a lower thermal stability than the enantiopure lattice of identical periodicity and surface density. At monolayer saturation coverage, the pure enantiomers form a denser lattice than the racemate. This is in contrast to the three-dimensional tartaric acid crystals, where the racemate crystallizes in a lattice of higher density, which is also more thermally stable than the enantiopure tartaric acid crystals.     

SURFACE MOLECULAR STRUCTURE DETERMINATION OF LITHIUM SALT OF 10,12-NONACOSADIYNOIC ACID MONOMER AND POLYMER LANGMUIR-BLODGETT FILMS BY SCANNING FORCE MICROSCOPY COMPARED TO ELECTRON DIFFRACTION RESULTS

Langmuir-Blodgett films of lithium salts of 10,12-nonacosadiynoic acid monomer (Li/16-8 DA) and polymer (Li/16-8 PDA) were characterized by scanning force microscopy (SFM or AFM) to study their surface molecular structure. Based on analysis of these images, a two-dimensional oblique unit mesh is assigned for Li/16-8 DA monomer LB film with unit mesh parameter c = 0.549 ± 0.040 nm and b = 0.541 ± 0.060 nm with an angle of 113°. A hexagonal unit mesh is assigned for Li/16-8 PDA with unit mesh parameter c = 0.497 ± 0.052 nm and b = 0.497 ± 0.060 nm. We then report the comparison of two-dimensional, fast Fourier transform (FFT) of SFM images to the electron diffraction images. From the viewpoint of a three-dimensional structure projected onto a plane, centered rectangular nets can be assigned for both Li/16-8 DA and Li/16-8 PDA. The monomer unit cell parameters are c = 0.460 ± 0.040 nm and b = 1.020 ± 0.060 nm. The polymer cell parameters are c = 0.485 ± 0.080 nm and b = 0.820 ± 0.010 nm. The correlation between the two very different methods of surface structure determination is excellent. However, care must be taken in assigning the unit net (two-dimensional representation) and the projected unit cell (three-dimensional) vectors.     

Optical resolution of oriented enantiomers via photodissociation: quantum model simulations for H2POSD

We demonstrate quantum mechanically how to resolve enantiomers from an oriented racemic mixture taking advantage of photodissociation. Our approach employs a femtosecond ultraviolet (UV) laser pulse with specific linear polarization achieving selective photodissociation of one enantiomer from a mixture of L and R enantiomers. As a result, the selected enantiomer is destroyed in the electronically excited state while the opposite enantiomer is left intact in the ground state. As an example we use H2POSD which presents axial chirality. A UV pulse excites the lowest singlet excited state which has nsigma* character and is, therefore, strongly repulsive along the P-S bond. The model simulations are performed using wavepackets which propagate on two dimensional potential energy surfaces, calculated along the chirality and dissociation reaction coordinates using the CASSCF level of theory.     

Crystal structure and morphology of poly(16-hexadecalactone) chain-folded lamellar crystals

Solution-grown, chain-folded lamellar crystals of poly(16-hexadecalactone) (PHDL) were crystallized isothermally from 1-hexanol at 70 degrees C. The morphology of lozenge-shaped crystals was studied by TEM and AFM. The lamellae are ca. 10 nm thick and the chains run orthogonal to the lamellar surface with folding along (110) and (110) planes. The crystal structure of PHDL was determined by XRD and election diffraction of single crystals. The chains are in the 2(1) helix conformation close to all-trans and the structure consists of an orthorhombic unit cell with a P2(1)2(1)2(1) space group with the lattice constants a = 0.746 +/- 0.001 nm, b = 0.504 +/- 0.001 nm, and c (chain axis) = 4.116 +/- 0.003 nm. There are two chains per unit cell, which exist in an antiparallel arrangement. Molecular packing structure has been studied in detail, taking into account both diffraction data and energy calculations. The setting angles, with respect to a axis, were +/-40 degrees for the corner and center chains, respectively. By using the electron and XRD data, the best molecular packing model was refined to R-factors of 0.168 and 0.196, respectively. A brief comparison of chain-packing structure is also made with related polymer structures.