Application of water-activated carbon isotherm models to water adsorption isotherms of single-walled carbon nanotubes

The objective of this study is to understand the interactions of water with novel nanocarbons by implementing semiempirical models that were developed to interpret adsorption isotherms of water in common carbonaceous adsorbents. Water adsorption isotherms were gravimetrically determined on several single-walled carbon nanotube (SWNT) and activated carbon samples. Each isotherm was fitted to the Dubinin-Serpinsky (DS) equation, the Dubinin-Astakov equation, the cooperative multimolecular sorption theory, and the Do and Do equations. The applicability of these models was evaluated by high correlation coefficients and the significance of fitting parameters, especially those that delineate the concentration of hydrophilic functional groups, micropore volume, and the size of water clusters. Samples were also characterized by spectroscopic and adsorption techniques, and properties complementary to those quantified by the fitting parameters were extracted from the data collected. The comparison of fitting parameters with sample characterization results was used as the methodology for selecting the most informative and the best-fitting model. We conclude that the Do equation, as modified by Marban et al., is the most suitable semiempirical equation for predicting from experimental isotherms alone the size of molecular clusters that facilitate adsorption in SWNTs, deconvoluting the experimental isotherms into two subisotherms: adsorption onto hydrophilic groups and filling of micropores, and quantifying the concentration of hydrophilic functional groups, as well as determining the micropore volume explored by water. With the exception of the DS equation, the application of other water isotherm models to SWNTs is not computationally tractable. The findings from this research should aid studies of water adsorption in SWNTs by molecular simulation, which remains the most popular tool for understanding the microscopic behavior of water in nanocarbons.     

Hydrogen adsorption in defected carbon nanotubes

Recently there has been lot of interest in the development of hydrogen storage in various systems for the large-scale application of fuel cells, mobiles and for automotive uses. Hectic materials research is going on throughout the world with various adsorption mechanisms to increase the storage capacity. It was observed that physisorption proves to be an effective way for this purpose. Some of the materials in this race include graphite, zeolite, carbon fibers and nanotubes. Among all these, the versatile material carbon nanotube (CNT) has a number of favorable points like porous nature, high surface area, hollowness, high stability and light weight, which facilitate the hydrogen adsorption in both outer and inner portions. In this work we have considered armchair (5,5), zig zag (10,0) and chiral tubes (8,2) and (6,4) with and without structural defects to study the physisorption of hydrogen on the surface of carbon nanotubes using DFT calculations. For two different H₂ configurations, adsorption binding energies are estimated both for defect free and defected carbon nanotubes. We could observe larger adsorption energies for the configuration in which the hydrogen molecular axis perpendicular to the hexagonal carbon ring than for parallel to C–C bond configuration corresponding to the defect free nanotubes. For defected tubes the adsorption energies are calculated for various configurations such as molecular axis perpendicular to a defect site octagon and parallel to C–C bond of octagon and another case where the axis perpendicular to hexagon in defected tube. The adsorption binding energy values are compared with defect free case. The results are discussed in detail for hydrogen storage applications.     

Phenol adsorption on closed carbon nanotubes

We present the results of systematic studies of phenol adsorption on closed commercially available, unmodified carbon nanotubes. Phenol adsorption is determined by the value of tube-specific surface area, the presence of small amount of surface groups influence adsorption only in very small amount. Phenol can be applied as a probe molecule for comparative analysis of tube surface areas. Tube curvature influences adsorption from solution, i.e., we observe increasing adsorption energy (and slower desorption process) with the decrease in tube curvature. This is in full accordance with molecular simulation results.     

Monomer adsorption on terraces and nanotubes

We construct a nonsparse transfer matrix (T-matrix) for a lattice gas model of monomers adsorbed on planar and nanotube surfaces of arbitrary geometry. The model can accommodate any number of higher-order pairwise adsorbate-adsorbate interactions. The technique is sufficiently general for application to nonequivalent adsorption sites and coadsorption of two or more monomer species. The T-matrices for monomer adsorption on a finite width terrace and for monomer adsorption on a nanotube, both of the same lattice geometry, share a basic G-matrix. First, the G-matrix is diagrammatically and recursively constructed. Then, its elements are modified to provide the T-matrix elements for either the terrace or the nanotube. The T-matrices for several particular lattice geometries previously studied as special cases are easily recovered with the generalized technique presented here. This generalization also provides a vectorized algorithm for efficient use on multi-parallel processors and supercomputers.     

Simulated water adsorption in chemically heterogeneous carbon nanotubes

Grand canonical Monte Carlo simulations are used to study the adsorption of water in single-walled (10:10), (12:12), and (20:20) carbon nanotubes at 298 K. Water is represented by the extended simple point charge model and the carbon atoms as Lennard-Jones spheres. The nanotubes are decorated with different amounts of oxygenated sites, represented as carbonyl groups. In the absence of carbonyl groups the simulated isotherms are characterized by negligible amounts of water uptake at low pressures, sudden and complete pore filling once a threshold pressure is reached, and wide adsorption-desorption hysteresis loops. In the presence of a few carbonyl groups the simulated adsorption isotherms are characterized by pore filling at lower pressures and by narrower adsorption-desorption hysteresis loops compared to the results obtained in the absence of carbonyl groups. Our results show that the distribution of the carbonyl groups has a strong effect on the adsorption isotherms. For carbonyl groups localized in a narrow section the adsorption of water may be gradual because a cluster of adsorbed water forms at low pressures and grows as the pressure increases. For carbonyl groups distributed along the nanotube the adsorption isotherm is of type V.     

Fluoride and lead adsorption on carbon nanotubes

The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on.…     

Simulation of adsorption of DNA on carbon nanotubes

We report molecular dynamics simulations of DNA adsorption on a single-walled carbon nanotube (SWNT) in an aqueous environment. We have modeled a DNA segment with 12 base pairs (Dickerson dodecamer) and a (8,8) SWNT in water, with counterions to maintain total charge neutrality. Simulations show that DNA binds to the external surface of an uncharged or positively charged SWNT on a time scale of a few hundred picoseconds. The hydrophobic end groups of DNA are attracted to the hydrophobic SWNT surface of uncharged SWNTs, while the hydrophilic backbone of DNA does not bind to the uncharged SWNT. The binding mode of DNA to charged SWNTs is qualitatively different from uncharged SWNTs. The phosphodiester groups of the DNA backbone are attracted to a positively charged SWNT surface while DNA does not adsorb on negatively charged SWNTs. There is no evidence for canonical double-stranded DNA wrapping around either charged or uncharged SWNTs on the very short time scales of the simulations. The adsorption process appears to have negligible effect on the internal stacking structure of the DNA molecule but significantly affects the A to B form conversion of A-DNA. The adsorption of A-DNA onto an uncharged SWNT inhibits the complete relaxation of A-DNA to B-DNA within the time scale of the simulations. In contrast, binding of the A-DNA onto a positively charged SWNT may promote slightly the A to B conversion.     

The adsorption of biogenic amines on carbon nanotubes

The adsorption of phenylethylamine, tryptamine, and tyramine on carbon nanotubes from aqueous solutions (pH 7.4) was studied depending on time and sorbate concentration. The suggestion was made that their interaction with electrodes was determined by electrostatic attraction between protonated amino groups and oxygen-containing functional groups of the surface of carbon. An increase in the adsorption of biological amines was caused by the interaction of the π systems of their aromatic rings with carbon surface hexagons. The adsorption of biogenic amines on carbon nanotubes was necessary for their possible electrooxidation and analytic determination by electrochemical methods with the use of carbon electrodes. Original Russian Text ? I.G. Sidorenko, O.V. Markitan, N.N. Vlasova, G.M. Zagorovskii, V.V. Lobanov, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 6, pp. 1139–1142.     

碳纳米管内N2吸附行为及等量吸附热的GCMC分子模拟研究

碳纳米管及石墨烯具有高比表面积、高化学稳定性以及高耐蚀性等优点,被认为是一种理想的吸附材料。分子模拟技术的发展和应用丰富了人们对吸附机理研究的方式,而简单气体吸附体系的吸附机理研究对吸附理论的发展有着重要的推动作用。本文以单壁碳纳米管（SWCNT）-N₂吸附体系为研究对象,首先通过透射扫描电镜和氮气吸/脱附测试对所选用碳纳米管的微观孔形貌及吸/脱附等温线进行了表征,然后根据对应孔径参数采用巨正则蒙特卡罗方法对该体系的吸附过程进行了分子模拟,并详细研究了碳纳米管孔径和温度对该体系吸附行为的影响。结果显示,SWCNT孔径越小,吸附能力则越强;孔半径为0.746nm的SWCNT的吸附体系发生凝聚相变的临界温度为66K。通过对等量吸附热进行计算发现,孔半径0.746、1.15、1.56和1.83 nm的SWCNT-N₂吸附体系对应的初始固-液等量吸附热分别为10.9、9.2、8.6和8.4 kJ/mol。67.5K时,孔半径1.56和1.83 nm的吸附体系的等量吸附热有热峰出现。     

Mathematical experiments and adsorption models

Colloid and Polymer Science - A statistical simulation method, designated as a “mathematical experiment”, is used to establish some characteristics of the adsorption models most widely...     

Surface structure and adsorption properties of multiwalled carbon nanotubes

The pore structure, sorption parameters, and chemical composition of the surface of multiwalled carbon nanotubes synthesized by catalytic pyrolysis were determined. The dependences of the amount of cholic acid adsorbed by the nanotube surface on time, pH, and concentration of an equilibrium solution were studied. Physical adsorption of cholic acid is mainly the outcome of nonspecific interactions between the acid and the surface of the nanotubes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1712–1715, October, 2006.     

Ni adsorption on Stone-Wales defect sites in single-wall carbon nanotubes

Ni adsorption on Stone-Wales defect sites in (10,0) zigzag and (5,5) armchair single-wall carbon nanotubes was studied using the density functional theory. The stable adsorption sites and their binding energies on different Stone-Wales defect types were analyzed and compared to those on perfect side walls. It was determined that the sites formed via fusions of 7-7 and 6-7 rings are the most exothermic in the cases of (10,0) and (5,5) defective tubes. In addition C-C bonds associated with Stone-Wales defects are more reactive than the case for a perfect hexagon, thus enhancing the stability of the Ni adsorption. Moreover, the Ni adsorption was found to show a noticeable relationship to the orientation of the Stone-Wales defects with respect to the tube axis. The nature of the Ni adsorption on Stone-Wales defects that have the similar orientation is identical, in spite of the different chiralities.     

Simple models for large-molecule calculations

In spite of tremendous advances in computational quantum chemistry during recent years, there remains the problem of how to deal with molecules so large that calculations of electronic structure and properties require the use of simplified models. This review contains (i) an appraisal of some currently available theoretical models together with proposals for further development, and (ii) a discussion of the use of such models (via variation-perturbation theory) in the interpretation and prediction of electronic properties. The great majority of electronic properties can be discussed in terms of three distribution functions: the electron density, the spin density, and the current density. The electron density is “observed” in x-ray scattering and the spin density in (spin-polarized) neutron scattering, while the current density (present whenever a magnetic field is applied) gives rise to effects observed typically in ESR and NMR experiments. The aim of model calculations should be to obtain a realistic picture of the distribution functions, sufficient for semiquantitative property calculations. For this purpose, as history suggests, it may not always be essential to proceed to the limits of computational feasibility.     

Enthalpy and entropy effects in hydrogen adsorption on carbon nanotubes

Interaction energies and entropies associated with hydrogen adsorption on the inner and outer surfaces of zigzag single-wall carbon nanotubes (SWCNT) of various diameters are analyzed by means of molecular mechanics, density functional theory, and ab initio calculations. For a single molecule the strongest interaction, which is 3.5 greater than that with the planar graphite sheet, is found inside a (8,0) nanotube. Adsorption on the outer surfaces is weaker than that on graphite. Due to the steric considerations, both processes are accompanied by an extremely strong decline in entropy. Absence of specific adsorption sites and weak attractive interaction between hydrogen molecules within carbon nanotubes results in their close packing at low temperatures. Using the calculated geometric and thermodynamic parameters in Langmuir isotherms we predict the adsorption capacity of SWCNTs at room temperature to be smaller than 1 wt % even at 100 bar.     

Simple immobilization of pyrroloquinoline quinone on few-walled carbon nanotubes

Pyrroloquinoline quinone (PQQ) was immobilized on glassy-carbon electrodes (GCE) modified with single-walled carbon nanotubes (SWCNT), few-walled carbon nanotubes (FWCNT) and carbon black (Vulcan XC72R). Modified electrodes were prepared by drop-casting. Immobilization was achieved with an extremely simple dipping procedure and without any further modification to the electrodes. Electrochemical performance of the electrodes was studied by cyclic voltammetry and spectroelectrochemistry. FWCNT adsorbed 30 times more PQQ than the other carbon materials. Compared to more complicated immobilization methods, PQQ/FWCNT/GCE showed well-defined electrochemistry in a considerably wide pH area from 2 to 12. The dipping process is affected by pH and electrostatic forces. At dipping pH 9.5, where both FWCNTs and PQQ have strong negative charge, the adsorption was halved compared to dipping pH 2, where the charges are smaller.     

Joint adsorption of benzene and water on carbon nanotubes

The joint adsorption of water and benzene on nanosized carbon tubes (NCTs) (with a specific surface area of 413 m²/g) synthesized by carbonizing methylene chloride in cylindrical pores of an Al₂O₃ matrix was studied. ¹H NMR spectroscopy with layer-by-layer freezing of the liquid phase was used to characterize the water bound in pores at various contents of benzene and water. Due to its higher energy of interaction with carbon surfaces, benzene was demonstrated to decrease the energy of interaction of water with the surface of the NCT sample from 43 to 15 J/g. It was suggested that, in the presence of benzene, H-bonded water clusters only weakly bound to the surface are formed in the cylindrical cavities of the NCTs.     

Monte Carlo simulations of hydrogen adsorption in alkali-doped single-walled carbon nanotubes

Monte Carlo simulations and Widom's test particle insertion method have been used to calculate the solubility coefficients (S) and the adsorption equilibrium constants (K) in single-walled (10,10) armchair carbon nanotubes including single nanotubes, and nanotube bundles with various configurations with and without alkali dopants. The hydrogen adsorption isotherms at room temperature were predicted by following the Langmuir adsorption model using the calculated constants S and K. The simulation results were in good agreement with experimental data as well as the grand canonical Monte Carlo simulation results reported in the literature. The simulations of nanotube bundle configurations suggest that the gravimetric hydrogen adsorption increases with internanotube gap size. It may be attributed to favorable hydrogen-nanotube interactions outside the nanotubes. The effect of alkali doping on hydrogen adsorption was studied by incorporating K+ or Li+ ions into nanotube arrays using a Monte Carlo simulation. The results on hydrogen adsorption isotherms indicate hydrogen adsorption of 3.95 wt% for K-doping, and 4.21 wt% for Li-doping, in reasonable agreement with the experimental results obtained at 100 atm and room temperature.     

单壁碳纳米管中甲烷吸附的分子模拟

采用巨正则系统MonteCarlo方法研究了甲烷在单壁碳纳米管(Singlewallcarbonnanotube,SWNT)中于低温74.05K下的吸附等温线及吸附机理,发现在两个较小的孔径(1.225nm和1.632nm)下单壁碳纳米管中甲烷的吸附有着明显的微孔所独有的“填充效应”,而在2.04nm以上的孔的吸附中会出现毛细凝聚现象。通过模拟知道发生毛细凝聚的必要条件是孔内能至少容纳下两层粒子,此外还导出在恒定温度下毛细凝聚吸附量与SWNT孔径关系。本文还模拟了常温300K下甲烷在SWNT内的吸附,对比了2.04nm和4.077nm两种孔径的SWNT吸附甲烷的等温线,推荐在4.077nm孔中的适宜吸附存储压力为5.0～6.0MPa,吸附质量分数可达16%～19%.