Properties of an Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Si interface

The phase chemical composition of an Al₂O₃/Si interface formed upon molecular deposition of a 100-nm-thick Al₂O₃ layer on the Si(100) (c-Si) surface is investigated by depth-resolved ultrasoft x-ray emission spectroscopy. Analysis is performed using Al and Si L_{2, 3} emission bands. It is found that the thickness of the interface separating the c-Si substrate and the Al₂O₃ layer is approximately equal to 60 nm and the interface has a complex structure. The upper layer of the interface contains Al₂O₃ molecules and Al atoms, whose coordination is characteristic of metallic aluminum (most likely, these atoms form sufficiently large-sized Al clusters). The shape of the Si bands indicates that the interface layer (no more than 10-nm thick) adjacent to the substrate involves Si atoms in an unusual chemical state. This state is not typical of amorphous Si, c-Si, SiO₂, or SiO_x (it is assumed that these Si atoms form small-sized Si clusters). It is revealed that SiO₂ is contained in the vicinity of the substrate. The properties of thicker coatings are similar to those of the 100-nm-thick Al₂O₃ layer and differ significantly from the properties of the interfaces of Al₂O₃ thin layers.     

Metastable superconductivity of the Al/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> interface

Superconductivity in the interface region between metallic Al and its oxide, Al₂O₃, has been detected at about 45 K in the measured dynamic magnetic susceptibility.     

Al<Subscript>2</Subscript>O<Subscript>3</Subscript> plasma production during pulsed laser deposition

A Nd:YAG laser operating in second harmonic (532 nm), 3 ns pulse duration, 150 mJ pulse energy, and 10 Hz repetition rate, is employed to irradiate Al₂O₃ target placed in high vacuum. The produced plasma is investigated by an ion collector used in time-of-flight configuration and by a mass quadrupole spectrometer, in order to determine the equivalent plasma temperature and the atomic and molecular composition. Pulsed laser deposition technique has been used to produce thin films on different substrates placed close to the target. Different surface analyses, such as energy dispersive X-ray fluorescence (EDXRF), X-ray photoelectron spectroscopy (XPS) and surface profilometry are employed to characterize the produced films. Measurements of ablation yield, plasma equivalent temperature, acceleration voltage and characterization of grown thin films are presented and discussed.     

X-ray emission study of the electronic structure of nanocrystalline Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Valence states of metal ions and the phase composition of nanocrystalline Al₂O₃ (of the original oxide and the oxide irradiated by high-energy Fe⁺ ions) are studied by using x-ray emission Al L_{2, 3} and O Kα spectra. It is established that the shape of the Al L_{2, 3} spectra strongly changes as one goes from the original (bulk) Al₂O₃ to nanocrystalline oxide, while the O Kα spectra remain practically unchanged. Moreover, irradiation by high-energy Fe⁺ ions results in slight additional changes in the x-ray spectral characteristics of the aluminum oxides under study. The obtained experimental data are compared with the results of theoretical calculations of the electronic structure of α and γ phases of Al₂O₃ performed using the LDA formalism. Using the results of x-ray spectral studies, electronic structure calculations, and x-ray diffraction analysis, it is shown that the revealed spectral differences between the nanocrystalline state of aluminum oxide and the bulk material can be interpreted as a phase transition from the α phase to the γ phase of Al₂O₃ with an addition of bayerite.     

Thermal hysteresis of a simulated Al<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Thermal hysteresis in a simulated Al₂O₃ system has been investigated using a Molecular Dynamics (MD) method. Simulations were done in the basic cube under periodic boundary conditions containing 3000 ions with Born-Mayer type pair potentials. The system was cooled down from 7000 K to 0 K and heated up from 0 K to 7000 K by the same cooling/heating rate of 1.7178×10¹⁴ K/s. The temperature dependence of the system density upon cooling and heating shows thermal hysteresis. The differences between structure and dynamics of the models obtained by cooling (MOBC) and heating (MOBH) at three different temperatures of 2100 K, 3500 K and 5600 K have been detected. Calculations show that the differences in the dynamics of the systems are more pronounced than those in the structure. Furthermore, dynamical heterogeneities in MOBC and MOBH at the temperature of 2100 K have been studied through a non-Gaussian parameter and comparison of partial radial distribution functions (PRDFs) for the 10% most mobile or immobile particles with their corresponding mean ones. Cluster size distributions of the 10% most mobile or immobile particles in MOBC and MOBH at the temperature of 2100 K have been obtained. Calculations show that differences in dynamical heterogeneities are pronounced.     

Electric and magnetic properties of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/Pb(Zr<Subscript>0.52</Subscript>Ti<Subscript>0.48</Subscript>)O<Subscript>3</Subscript> bilayer thin films prepared by pulsed-laser deposition

CoFe₂O₄ (CFO) thin film with highly (111)-preferential orientation was first deposited on the silicon substrate by a pulsed-laser deposition, and then Pb(Zr_0.52Ti_0.48)O₃ (PZT) layers were deposited with different oxygen pressures to form the bilayer CFO/PZT nanocomposite thin films. X-ray diffraction showed that the PZT preferential orientation was strongly dependant on the oxygen pressure. The smooth film surface was obtained after depositing the CFO and PZT layers. The bilayer thin films exhibit good ferromagnetic and ferroelectric properties, and a low leakage current density of 0.004 μA/cm² at 50 kV/cm. The leakage current density curves show loops for the electric polarized field when the electric field reverses. PACS 77.84.Lf; 75.80+q; 81.05.Zx; 81.15.Fg     

Modification of the Al<Subscript>2</Subscript>O<Subscript>3</Subscript> surface by high-energy bismuth ions

This paper reports on an atomic-force microscopy study of the surface of α-Al₂O₃ single crystals irradiated by Bi ions with energies of 710, 557, 269, and 151 MeV. The shape of the radiation defects produced by single ions was established to depend on the ionization energy loss. The threshold ionization density above which the surface topography is observed to change lies in the 27–35 keV/nm interval. Possible mechanisms of defect formation in the thermal-spike model, namely, a phase transition and the creation of thermoelastic stresses in the high-energy ion track, are considered.     

The film thickness dependent thermal stability of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>:Ag thin films as high-temperature solar selective absorbers

The monolayer Al₂O₃:Ag thin films were prepared by magnetron sputtering. The microstructure and optical properties of thin film after annealing at 700 °C in air were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and spectrophotometer. It revealed that the particle shape, size, and distribution across the film were greatly changed before and after annealing. The surface plasmon resonance absorption and thermal stability of the film were found to be strongly dependent on the film thickness, which was believed to be associated with the evolution process of particle diffusion, agglomeration, and evaporation during annealing at high temperature. When the film thickness was smaller than 90 nm, the film SPR absorption can be attenuated until extinct with increasing annealing time due to the evaporation of Ag particles. While the film thickness was larger than 120 nm, the absorption can keep constant even after annealing for 64 h due to the agglomeration of Ag particles. On the base of film thickness results, the multilayer Al₂O₃:Ag solar selective thin films were prepared and the thermal stability test illustrated that the solar selectivity of multilayer films with absorbing layer thickness larger than 120 nm did not degrade after annealing at 500 °C for 70 h in air. It can be concluded that film thickness is an important factor to control the thermal stability of Al₂O₃:Ag thin films as high-temperature solar selective absorbers.     

Silver conductor fabrication by laser direct writing on Al<Subscript>2</Subscript>O<Subscript>3</Subscript> substrate

A novel technology for manufacturing circuitry, differing from conventional methods, called laser micro-cladding electronic pastes is presented. In this article, high-quality silver conductors were made on an Al₂O₃ substrate by this method. The process and corresponding mechanisms are described in detail. The experimental results show that the conductive lines produced have a minimum line width of 20 m, which is much smaller than the current limitations of conventional processes. The resistivity can reach the order of 10^-6 cm, which is the same level for pure bulk silver. Optical micrographs and SEM morphology observations were also carried out. PACS 81.15.Fg; 42.70.Hj; 42.62.-b; 42.62.Cf; 61.80.Ba     

Gas sensor based on nanosize In<Subscript>2</Subscript>O<Subscript>3</Subscript>:Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> film

Nanosize films of In₂O₃:Ga₂O₃ (96:4 weight %) have been deposited on a glassceramic substrate by the method of rf magnetron sputtering. The surfaces of fabricated films were studied with use of a scanning electron microscope; sizes of grains were determined and the thicknesses of films were measured. In order to prepare a gas-sensitive structure, a thin catalytic palladium layer and ohmic comb contacts were deposited on the In₂O₃:Ga₂O₃ film surface by the method of ion-plasma sputtering. The sensitivity of sensors based on the glassceramic/In₂O₃:Ga₂O₃ (96:4 weight %)/Pd structure to different concentrations of propane and butane gas mixture, as well as to methane was investigated at temperatures of working substance from 250 to 300°C.     

EPR study of ordered Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-based aerogel

Samples of oriented aerogel based on aluminum oxide are studied by the electron paramagnetic resonance (EPR) technique under steady-state and pulse conditions. At least two types of paramagnetic centers interacting with Al nuclei on the surface of aerogel are revealed. Their spectra are characterized by the presence or absence of superhyperfine structure in the EPR spectra, respectively. The X-ray irradiation at room temperature gives rise to the formation of additional long-lived paramagnetic centers of the second kind. Their characteristic decay times for the “fast” and “slow” processes are determined. The interaction of induced paramagnetic centers with protons located on the surface of aerogel is revealed.     

Heterostructural coaxial nanotubes of CNT@Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> via atomic layer deposition: effects of surface functionalization and nitrogen-doping

This study attempted to synthesize one-dimensional (1D) coaxial nanotubes of Fe₂O₃ based on carbon nanotubes (CNT@Fe₂O₃) via atomic layer deposition (ALD) using ferrocene and oxygen as precursors. Results disclosed that undoped CNTs were suitable for the ALD of Fe₂O₃ (ALD-Fe₂O₃) only if they were chemically functionalized, due to their inert surface nature. It was further demonstrated that the effects of both covalent and non-covalent methodologies were limited in functionalizing undoped CNTs, leading to random and non-uniform deposition of Fe₂O₃. In sharp contrast, it was found that, as an alternative, nitrogen-doped CNTs (N-CNTs) contributed uniform and tunable ALD-Fe₂O₃, due to their active surface nature induced by incorporated N atoms. Consequently, various 1D heterostructural coaxial nanotubes were obtained with well-controlled growth of Fe₂O₃ on N-CNTs. For a better understanding, the underlying mechanisms were explored based on different N-doping configurations. In addition, high-resolution transmission electron microscopy and X-ray diffraction jointly demonstrated that as-deposited Fe₂O₃ is single-phase crystalline α-Fe₂O₃ (hematite). The as-synthesized heterostructural coaxial nanotubes of CNT@Fe₂O₃ may find great potential applications in photocatalysis, gas-sensing, and magnetic fields.     

Electronic excitations and defects in nanostructural Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

A time-resolved cathodo-and photoluminescence study of nanostructural modifications of Al₂O₃ (powders and ceramics) excited by heavy-current electron beams, as well as by pulsed synchrotron radiation, is reported. It was found that Al₂O₃ nanopowders probed before and after Fe⁺ ion irradiation have the same phase composition (the γ-phase/δ-phase ratio is equal to 1), an average grain size equal to ～17 nm, and practically the same set of broad cathodoluminescence (CL) bands peaking at 2.4, 3.2, and 3.8 eV. It was established that Al₂O₃ nanopowders exhibit fast photoluminescence (PL) (a band at 3.2 eV), whose decay kinetics is described by two exponential stages (τ₁ = 0.5 ns, τ₂ = 5.5 ns). Three bands, at 5.24, 6.13, and 7.44 eV, were isolated in the excitation spectrum of the fast PL. Two alternate models of PL centers were considered, according to which the 3.2-eV luminescence either originates from radiative relaxation of the P^? centers (anion-cation vacancy pairs) or is due to the formation of surface analogs of the F⁺ center (F _S ⁺ -type centers). In addition to the fast luminescence, nano-Al₂O₃ was found to produce slow luminescence in the form of a broad band peaking at 3.5 eV. The excitation spectrum of the 3.5-eV luminescence obtained at T = 13 K exhibits two doublet bands with maxima at 7.8 and 8.3 eV. An analysis of the luminescent properties of nanostructural and single-crystal Al₂O₃ suggests that the slow luminescence of nanopowders at 3.5 eV is due to radiative annihilation of excitons localized near structural defects.     

Effect of passivating Al<Subscript>2</Subscript>O<Subscript>3</Subscript> thin films on MnO<Subscript>2</Subscript>/carbon nanotube composite lithium-ion battery anodes

MnO₂/carbon nanotube composite electrodes for Li-ion battery application were directly coated with ultrathin thicknesses of aluminum oxide film by atomic layer deposition (ALD). The non-reactive Al₂O₃ layer not only provides a stable film to protect the manganese oxide and carbon nanotubes from undesirable reaction with the electrolyte but also restrains the volume change strain of manganese oxide during cycling. The first cycle Coulombic efficiency of coated samples was increased to different extents depending on the coating thickness. In the following cycles, the coated electrodes denote high specific capacity, good capacity retention ability, and perfect rate charge/discharge performance.     

Synthesis and magnetic properties of FeNi<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> core-shell nanocomposites

In this study, FeNi₃/Al₂O₃ core-shell nanocomposites, where individual FeNi₃ nanoparticles were coated with a thin layer of alumina, were fabricated by a modified sol-gel method. Several physical characterizations were performed on the samples of FeNi₃/Al₂O₃ nanocomposites with different thickness of Al₂O₃ shell. The encapsulation of FeNi₃ nanoparticles with alumina stops FeNi₃ agglomeration during heat treatment, and prevents interaction among the closely spaced magnetic FeNi₃ nanoparticles. The Al₂O₃ insulating shell improves the soft magnetic properties of FeNi₃. The study of the complex permeability of the samples shows that the real part μ’ of the permeability of the sample with Al molar content of 20% (Al/(Fe+Ni)) is as high as 12, and independent of frequency up to at least 1 GHz. The tunneling magnetoresistance arising from the presence of the Al₂O₃ shell have also been studied.     

Mechanism of propagation of the combustion front in a Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + 2Al + 30% Al<Subscript>2</Subscript>O<Subscript>3</Subscript> mixture

The results of experiments on the combustion of a powdery Fe₂O₃-Al-Al₂O₃ mixture in an argon flow are reported. The process of combustion is perturbed by a pressure drop across the batch created by evacuating one of the end faces of the reaction cell. The effects of gasifiable additives (borax and soda) and a pressure drop on the combustion characteristics are studied. The results obtained are interpreted within the framework of the convection-conduction theory of combustion of heterogeneous condensed systems.     

Metallic liquid hydrogen and likely Al<Subscript>2</Subscript>O<Subscript>3</Subscript> metallic glass

Dynamic compression has been used to synthesize liquid metallic hydrogen at 140 GPa (1.4 million bar) and experimental data and theory predict Al₂O₃ might be a metallic glass at ∼ 300 GPa. The mechanism of metallization in both cases is probably a Mott-like transition. The strength of sapphire causes shock dissipation to be split differently in the strong solid and soft fluid. Once the 4.5-eV H-H and Al-O bonds are broken at sufficiently high pressures in liquid H₂ and in sapphire (single-crystal Al₂O₃), electrons are delocalized, which leads to formation of energy bands in fluid H and probably in amorphous Al₂O₃. The high strength of sapphire causes shock dissipation to be absorbed primarily in entropy up to ∼400 GPa, which also causes the 300-K isotherm and Hugoniot to be virtually coincident in this pressure range. Above ∼400 GPa shock dissipation must go primarily into temperature, which is observed experimentally as a rapid increase in shock pressure above ∼400 GPa. The metallization of glassy Al₂O₃, if verified, is expected to be general in strong oxide insulators. Implications for Super Earths are discussed.     

Revelation of the microstructure of oxide FeAl/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite

The structural transformations at different stages of the preparation of oxide FeAl/Al₂O₃ nanocomposite by mechanosynthesis with the use of a preliminarily activated FeAl precursor are studied by means of transmission electron microscopy, X-ray diffraction and Mössbauer spectroscopy.