Ytterbium tris(hexafluoroacetylacetonate) Yb(C<Subscript>5</Subscript>O<Subscript>2</Subscript>HF<Subscript>6</Subscript>)<Subscript>3</Subscript>: The composition of overheated vapor and sublimation thermodynamics

A mass spectrometric study of the saturated vapor over ytterbium tris(hexafluoroacetylacetonate) Yb(hfa)₃ (hfa = CF₃-C(O)-CH-C(O)-CF₃) and of the vapor overheated up to the thermal decomposition temperature of the complex is presented. The vapor composition changes markedly with increasing temperature. At T ≈ 370 K, the mass spectrum of the vapor over Yb(hfa)₃ indicates the presence of ions containing one to three metal atoms. As the temperature is raised, the ion currents due to oligomer ions decrease. The oligomers are not detected at T > 440 K. The total decomposition temperature of Yb(hfa)₃ is 663(9) K. The second-law enthalpy of sublimation (ΔH _s^o (380 K)) is 134 ± 7 kJ/mol for the monomer and 138 ± 10 kJ/mol for the dimer. The enthalpy of dissociation of the dimer into monomer molecules is nearly equal to the enthalpy of sublimation of the monomer and dimer: ΔH _dis(380 K) = 130 ± 15 kJ/mol.     

Calorimetric investigations of luminescent films polycarbonate (PC) doped with europium complex [Eu(TTA)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]

Polymers doped with rare earth complexes are advantaged in film production for many applications in the luminescent field. In this luminescent polycarbonate (PC) films doped with diaquatris(thenoyltrifluoroacetonate)europium(III) complex [Eu(TTA)₃(H₂O)₂] were prepared and their calorimetric and luminescent properties in the solid state are reported. The thermal behavior was investigated by utilization of differential scanning calorimetry (DSC) and thermogravimetry (TG). Due of the addition of rare earth [Eu(TTA)₃(H₂O)₂] into PC matrix, changes were observed in the thermal behavior concerning the glass transition and thermal stability. Characteristic broadened narrow bands arising from the ⁵D₀ → ⁷F_J transitions (J = 4−0) of Eu³⁺ ion indicate the incorporation of the Eu³⁺ ions in the polymer. The luminescent films show enhancement emission intensity with an increase of rare earth concentration in polymeric matrix accompanied by decrease in thermal stability.     

Solubility of Eu<Subscript>2</Subscript>(SeO<Subscript>3</Subscript>)<Subscript>3</Subscript> and sorption of Eu(III) onto TiO<Subscript>2</Subscript> in the presence of Se(IV)

Metal ions sorption can be significantly affected by the presence of other sorbates, especially of complexing ligands. In this study, the effect of Se(IV) on Eu(III) sorption onto TiO₂ at different pH and Eu(III) concentration was investigated. Se(IV) was found to enhance Eu(III) sorption as a function of Se(IV) concentration. Constant capacitance model was successfully used to interpret the sorption experimental data. The solubility product of Eu₂(SeO₃)₃ at ambient temperature was investigated to highlight the sorption mechanism of ternary sorption system. The pK _sp value of Eu₂(SeO₃)₃ was found to be 31.51 ± 0.95.     

Photochemical properties of mixed-ligand europium compounds of Eu(C<Subscript>10</Subscript>H<Subscript>11</Subscript>F<Subscript>7</Subscript>O<Subscript>2</Subscript>)<Subscript>3</Subscript>D composition

The intensively luminescing mixed-ligand europium compounds were synthesized of the composition Eu(C₁₀H₁₁F₇O₂)₃D, where C₁₀H₁₁F₇O₂ is heptafluorodimethyloctanedione, D is either 1,10-phenanthroline (C₁₂H₈N₂), triphenylphosphine oxide (C₁₈H₁₅PO), hexamethylphosphoramide (C₆H₁₈N₃PO), benzotriazole (C₆H₅N₃), or phenylguanidine [(C₆H₅NH)₂ =NH]. The luminescent properties of europium compounds in the crystalline state and in a polymer matrix of high-pressure polyethylene (HPPE) and polyvinyl chloride (PVC) and kinetics of the luminescence intensity decay under UV radiation were studied. The most photo-resistant in HDPE and PVC was found to be Eu(C₁₀H₁₁F₇O₂)₃Ph₃PO.     

Crystal structure and triboluminescence of centrosymmetric complex [Eu(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>(HMPA)<Subscript>3</Subscript>]

By single crystal X-ray analysis, the atomic structure of the crystals of [Eu(NO₃)₃(HMPA)₃] complex (HMPA is hexamethylphosphorotriamide) possessing intense triboluminescence is determined. Symmetry of centrosymmetrical crystals is monoclinic: a = 13.785(1) Å, b = 19.746(2) Å, c = 14.723(1) Å, β= 102.143(2)°, P2₁/n space group, Z = 4, d _x = 1.484 g/cm³. The crystal structure is represented by separate C₁₈H₅₄EuN₁₂O₁₂P₃ complexes linked by van der Waals interactions with pronounced cleavage planes. The coordination polyhedron of Eu(III) atom reflects the state of distorted square antiprism. The possible causes of spectral differences in the Stark structure of photo- and triboluminescence are discussed.     

Crystal structure and properties of AHoCuS<Subscript>3</Subscript> (A = Sr or Eu)

The structures of complex sulfides AHoCuS₃ (A = Sr or Eu) have been determined by X-ray powder diffraction. The crystals of the compounds belong to the orthorhombic crystal system; they are isostructural (space group, Pnma; structure type Eu₂CuS₃). The unit cell parameters for SrHoCuS₃ and EuHoCuS₃ are a = 10.1487(1) Å, b = 3.9332(1) Å, c = 12.9524(2) Å and a = 10.1484(2) Å, b = 3.9195(1) Å, c = 12.8499(2) Å, respectively. The temperatures and enthalpies of phase transformations of complex sulfides AHoCuS₃ (A = Sr or Eu) have been determined.     

Crystal and molecular structures and luminescence properties of [Eu(Cin)<Subscript>3</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> complex

The crystal structure of europium cinnamate of the composition [Eu(Cin)₃] _n (Cin is cinnamic acid anion C₉H₇O ₂ ^? ) was determined by X-ray crystallography (a = 22.626(1) Å, c = 7.7330(7) Å, space group R3/c, Z = 3, ρ_calc = 1.448 g/cm³). The coordination polyhedron of Eu atoms is a distorted trigonal prism with three centered square faces. The structure is built of infinite polymeric chains [Eu(Cin)₃] _n running along the c axis and linked by van der Waals and π stacking interactions. Luminescent characteristics of the compound were determined.     

Thermal synthesis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1–x</Subscript>(Er<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new environmentally friendly inorganic pigments. Chemical compounds of the (Bi₂O₃)_1–x(Er₂O₃)_x type were synthetized. The host lattice of these pigments is Bi2O3 that is doped by Er³⁺ ions. The incorporation of doped ions provides interesting colours and contributes to an increase in the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments.     

Study of Interactions Between Eu(thenoyltrifluoroacetonate)<Subscript>3</Subscript> and a Photosynthetic Chlorophyllous Pigment

Eu(thenoyltrifluoroacetonate)₃(Eu(TTA)₃), an ideal model lanthanide complex which harvests ultraviolet light in high yield and emits visible light efficiently, was coordinated with a chlorophyll derivative, methyl pyropheophorbide-a (MPA). A distinct color change, from blue to deep green, in solution gives evidence for a supramolecular interaction within the binary system. Ultraviolet-visible absorption and luminescence excitation/emission spectra, as well as luminescence lifetimes and quantum yield measurements, further show that molecular interactions occur between the two components.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

KBaR(BO<Subscript>3</Subscript>)<Subscript>2</Subscript> orthoborates (R = REE): Synthesis and study

The search for compounds with the formula composition KBaR(BO₃)₂ has been performed by solid-phase synthesis and differential thermal analysis. The compounds synthesized in this series are KBaPr(BO₃)₂ and KBaNd(BO₃)₂, which are isostructural to KBaY(BO₃)₂, are isotypical to butschliite K₂Ca(CO₃)₂, and crystallize in a trigonal system with space group R3m. The structural characteristics of compounds calculated for the entire series of REEs are given.     

Thermal analysis of doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

New environmentally inorganic pigments based on Bi₂O₃ doped by metal ions, such as Zr⁴⁺ and Dy³⁺ have been developed and characterized using the methods thermal analysis, X-ray powder diffraction, and spectral reflectance data. The compounds having formula Bi_2−x Dy _x/2Zr_3x/8O₃ (x = 0.2, 0.6, 1.0, and 1.2) were prepared by the solid state reaction. Methods of thermal analysis were used for determination of the temperature region of the pigment formation and thermal stability of compounds. The incorporation of doped ions in Bi₂O₃ changes the color from yellow to orange and also contributes to a growth of their thermal stability. This property gives a direction for coloring ceramic glazes.     

Synthesis,crystal structure and properties of manganese(II) hexafluoroacetylacetonates Mn(hfa)2(H2O)2 and KMn(hfa)3

Two manganese(II) hexafluoroacetylacetonate complexes, dihydrate, the Mn(hfa)₂(H₂O)₂ (1), and the bimetallic KMn(hfa)₃ (2) have been synthesized and characterized by X-ray single crystal structure analysis. They have a molecular structure and a polymeric structure, respectively. The high stability of 2 allowed sublimation without decomposition. It was then used as a precursor for MOCVD of fluoroperovskite, KMnF₃.     

Thermal synthesis of the CeO<Subscript>2</Subscript>-PrO<Subscript>2</Subscript>-Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>pigments

Summary The synthesis of new compounds based on the CeO₂-PrO₂-Nd₂O₃system, which can be used as pigments for colouring of ceramic glazes, is investigated in our laboratory. The optimum conditions for the syntheses of these compounds have been estimated. The methods of thermal analysis provided first information about the temperature region of the formation of the pigments investigated. The synthesis of these compounds was followed by thermal analysis using STA 449/C Jupiter (Netzsch, Germany).     

A new method of synthesis of BiFeO<Subscript>3</Subscript> prepared by thermal decomposition of Bi[Fe(CN)<Subscript>6</Subscript>]·4H<Subscript>2</Subscript>O

In order to investigate the formation of the multiferroic BiFeO₃, the thermal decomposition of the inorganic complex Bismuth hexacyanoferrate (III) tetrahydrate, Bi[Fe(CN)₆]·4H₂O has been studied. The starting material and the decomposition products were characterized by IR spectroscopy, thermal analysis, laboratory powder X-ray diffraction, and microscopic electron scanning. The crystal structures of these compounds were refined by Rietveld analysis. BiFeO₃ were synthesized by the decomposition thermal method at temperature as low as 600 °C. There is a clear dependence of the type and amount of impurities that are present in the samples with the time and temperature of preparation.     

Structural changes in UO2(hfa)2 NH3 near the melting point

A reversible colour change from lemon-yellow to orange was observed for polycrystalline UO₂(hfa)₂ NH₃ at 100°C (hfa = (1,1,1,5,5,5-hexafluoro-2,4-pentanedione)). The changes in the X-ray powder pattern between ?196° and 130°C were followed with a Guinier-Simon focussing camera. The colour change was not due to an α ? β type structural transition as found earlier in α and β- UO₂(hfa)₂ tmp (tmp = trimethyl phosphate), but was considered to be due to changes in the hydrogen bonding of the ammonia molecules.     

InF<Subscript>3</Subscript>-based bismuth-containing glasses

Glasses have been prepared in the InF₃-BiF₃-BaF₂-PbF₂-ZnF₂-LnF₃ (Ln = Eu, Tm) system. The short-range and medium-range order structure of the glass network is discussed on the basis of IR and Raman spectroscopy data. The effect of bismuth trifluoride on the thermal properties, structure, and photo-luminescence properties of glasses was studied. Bismuth trifluoride doping improves the thermal parameters of glasses. The polyhedra formed by bismuth trifluoride in the glass are not involved in the medium-range order. In rare-earth-containing glasses, strong photoluminescence was discovered in the range 530–560 nm with excitation by the Raman-masking 532-nm wavelength. Bismuth in the glass enhances the europium photoluminescence level in the glass of the InF₃-BiF₃-BaF₂-PbF₂-ZnF₂-EuF₃ system.     

Synthesis and study of sodium triuranate Na<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>3</Subscript>O<Subscript>3</Subscript>(OH)<Subscript>2</Subscript>

Sodium triuranate Na₂(UO₂)₃O₃(OH)₂ was synthesized by the reaction between aqueous uranyl acetate solution and aqueous sodium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the synthesized compound were determined, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and thermal analysis.     

Crystal structure and properties of [M(NH<Subscript>3</Subscript>)<Subscript>5</Subscript>Cl](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>, (M = Ir,Rh, Ru)

The crystal structures of compounds from the series [M(NH₃)₅Cl](NO₃)₂, (M = Ir, Rh, Ru) were described. The compounds crystallized in the tetragonal crystal system, space group I4, Z = 2. Crystal data for [Ir(NH₃)₅Cl](NO₃)₂ (I): a = 7.6061(1) Å, b = 7.6061(1) Å, c = 10.4039(2) Å, V = 601.894(16) ų, ρ_calc = 2.410 g/cm³, R = 0.0087; [Rh(NH₃)₅Cl](NO₃)₂ (II): a = 7.5858(5) Å, b = 7.5858(5) Å, c = 10.41357(7) Å, V = 599.24(7) ų, ρ_calc = 1.926 g/cm³, R = 0.0255; [Ru(NH₃)₅Cl](NO₃)₂ (III): a = 7.5811(6) Å, b = 7.5811(6) Å, c = 10.5352(14) Å, V = 605.49(11) ų, ρ_calc = 1.896 g/cm³, R = 0.0266. The compounds were defined by IR spectroscopy and XRPA and thermal analyses.     

Crystal structure of EuCeCuS<Subscript>3</Subscript>

The crystal structure of EuCeCuS₃, a complex sulfide synthesized for the first time, has been solved using X-ray powder diffraction data. Crystals are rhombic, space group Pnma, Ba₂MnS₃ structural type, a = 8.1023(1) Å, b = 4.0386(1) Å, c = 15.9022(2) Å, V = 520.36(1) ų, Z = 4, ρ_calcd = 5.767 g/cm³. The Eu,CeS₇ polyhedron incorporates the Eu and Ce atoms, which are randomly disordered over two crystallographic sites. The bond lengths d_Eu,Ce–S range from 2.885 to 3.044 Å.