Multifilamentation of femtosecond laser pulses induced by?small-scale air turbulence

We report on experimental and numerical investigations of femtosecond pulse propagation locally disturbed by the turbulent flow field of a hot-air blower. The experiments show that turbulence may shorten the collapse/filamentation distance and induce the onset of multiple filaments. This is supported by numerical simulations indicating that the high spatial frequency part of the turbulence spectrum plays a significant role.     

Multifilamentation of femtosecond laser pulses propagating in?turbulent air near the ground

The propagation of femtosecond laser pulses in turbulent air near the ground is analyzed. Confining to a power regime distinctly above the critical power for self-focusing, i.e. P≈100P _cr, and concentrating on initial peak intensities around 2.5×10¹¹W/cm², the onset and early evolution of multiple filaments are addressed. Making use of the turbulence phase-screen method, numerical simulations of the pulse propagation indicate that turbulence fields with spatial scales below 6 mm are able to induce the onset of multifilamentation. An analytical linear plane wave perturbation model of the underlying modulation instability of the pulse front is introduced in support of the computational results. By this means, insight into the amplification of an initial perturbation of the pulse front from the point of view of the spatial frequency domain is given.     

Poincaré representation of polarization-shaped femtosecond laser pulses

The usage of Poincaré phase space for the representation of polarization-shaped femtosecond laser pulses is discussed. In these types of light fields the polarization state (i.e. ellipticity and orientation) changes as a function of time within a single laser pulse. Such deliberate variation can be achieved by frequency-domain femtosecond pulse shaping in which two polarization components are manipulated individually. Here it is shown how these light pulses can be represented as temporal trajectories through the ellipticity-orientation (Poincaré) phase space, whereas conventional light (either continuous-wave or pulsed) is determined by only one specific Poincaré location. General properties of parametric Poincaré trajectories are discussed, and their relation to experimentally accessible pulse-manipulation parameters (i.e. amplitudes and phases) determined. Specifically, it is shown how the maximum rate by which a given polarization state can be turned into a different one (at significant intensity levels) is limited by the spectral laser bandwidth. Apart from their direct usage in polarization-shaped pulse representation, Poincaré trajectories also form the basis for intuitive quasi-three-dimensional renderings of the electric field profile. There, the temporal evolution of polarization, intensity, and chirp is directly apparent in a single illustration. Received: 10 December 2002 / Published online: 24 April 2003 RID="*" ID="*"Corresponding author. Fax: +49-931/888-4906, E-mail: brixner@physik.uni-wuerzburg.de     

Can we reach very high intensity in air with femtosecond PW laser pulses?

In the course of femtosecond pulse filamentation in atmospheric density gases, the peak intensity is always limited by optical-field-induced ionization. This intensity clamping phenomenon is universal in all the cases we studied, namely, single and multiple filament regimes with and without external focusing using pulses of up to subpetawatt level. Even in the tight focusing cases, the clamped intensity along the propagation direction does not exceed 30% of the global intensity maximum. The remarkable shot-to-shot stability of the clamped intensity (better than 1% of the maximum value) is revealed both experimentally and numerically in a single filament regime in air.     

Resonant propagation of femtosecond laser pulse in DBASVP molecule：one-dimensional asymmetric organic molecule

We have investigated the resonant propagation of femtosecond laser pulse in 4-trans-[p-（N, N-Di-n-butylamino）- p-stilbenyl vinyl] pyridine medium with permanent dipole moments. The electronic structures and parameters for the compound have been calculated by using density functional theory. In the optical regime, there is one charge-transfer state, and the molecule can thus be simplified as a two-level system. Both the one- and two-photon transitions occur between the ground and charge-transfer states. The numerical results show that the permanent dipole moments have an obvious effect on the propagation of the ultrashort pulse laser. The ideal self-induced transparency disappears for 2π pulse, and second harmonic spectral components occur significantly due to the two-photon absorption process. For the 6π pulse, continuum frequency generation is produced and a shorter duration pulse in time domain with 465 as is obtained.     

Nanoand microstructuring of materials’ surfaces using femtosecond laser pulses

Multimodal nanoand microscale surface textures are produced by scanning the surfaces of various structural materials using IR femtosecond laser radiation. The topographies of the modified surfaces and their wettabilities upon hydrophobization are studied.     

Numerical solutions of Green''''s integral equation for the diffraction of femtosecond laser pulses through a subwavelength aperture

In this letter, we propose a method for the numerical calculations of the femtosecond laser pulse passed through a subwavelength aperture. The time-dependent laser pulse is decomposed into a series of monochromatic simple harmonic waves. For the light field of the harmonic wave with a single frequency, the numerical calculation is made based on the solution of the Green's integral equation set of the electromagnetic waves. Such numerical solution is iterated for all the waves with different frequencies, and all the numerical solutions are transformed into the light fields in the time domain by inverse Fourier transform. The light intensity distributions transmitted the subwavelength aperture are calculated and the results show the propagation of the light field is along the direction of the medium interface.     

Formation of colorized silicon by femtosecond laser pulses in?different background gases

A single-crystal silicon(111) wafer surface fixed on an x–y translation stage is scanned with a focused femtosecond laser beam at a wavelength of 800 nm under different atmospheres (air, vacuum, and nitrogen). Different colors from different angles on the surface of the silicon then appear. From the result of the experiments, periodic ripple surface structures emerge on the surface of colorized silicon, and the phenomenon is more obvious in vacuum and nitrogen than in air. The periods of the surface structures on silicon are not the same in the different atmospheres. Under vacuum, the period is the longest and is closer to the wavelength of the laser irradiation. Different from metals, the range of energy density is smaller when the colorized silicon appears with femtosecond laser pulses. Through SEM, TEM, and AFM, we observe in detail the microstructures of colorized silicon that forms in air, vacuum, and nitrogen and analyze the possible physical mechanism. Finally, research into the optical reflection of the colorized silicon indicates that the reflectivity is not higher than 30% in the 250–800 nm range.     

Generation of femtosecond X-ray pulses via laser–electron beam interaction

The generation of femtosecond X-ray pulses will have important scientific applications by enabling the direct measurement of atomic motion and structural dynamics in condensed matter on the fundamental time scale of a vibrational period. Interaction of femtosecond laser pulses with relativistic electron beams is an effective approach to generating femtosecond pulses of X-rays. In this paper we present recent results from proof-of-principle experiments in which 300 fs pulses are generated from a synchrotron storage ring by using an ultrashort optical pulse to create femtosecond time structure on the stored electron bunch. A previously demonstrated approach for generating femtosecond X-rays via Thomson scattering between terawatt laser pulses and relativistic electrons is reviewed and compared with storage-ring based schemes.     

Three-dimensional optical data storage using a solid immersion lens to focus a femtosecond laser pulse

A solid immersion lens (SIL) has been applied to the writing and reading of three-dimensional optical data storage in transparent materials. Using a SIL with n=1.516 to focus a 150-fs, 800-nm Tiisapphire laser, the 5-layer reading and writing of data are achieved in fused silica and polyethylene methacrylate at a density of 1.1×10 2 b/cm3. Some advantages of the employment of SIL have been discussed.     

Dynamics of Coulomb explosion of hydrogen clusters in a high-intensity femtosecond laser pulse

Using Bethe model, the dynamics of the ionization and Coulomb explosion of hydrogen clusters (0.5-5 nm) in high-intensity (1015 -1017 W/cm2) femtosecond laser pulses have been studied theoretically, and the dependence of energy of protons emitted from exploding clusters on cluster size and laser intensity has been investigated. It is found that the maximum proton energy increases exponentially with the cluster size, and the exponent is mainly determined by the laser intensity. For a given cluster size, the maximum proton energy increases with increasing laser intensity and gets saturation gradually. The calculation results are in agreement with the recent experimental observation.     

Competition between multiphoton/tunnel ionization and filamentation induced by powerful femtosecond laser pulses in air

In this work we present experiments by focusing 42 femtosecond laser pulses in air using three differentfocal length lenses: f=100, 30 and 5 cm. For the longest focal length, only the filament, which is aweak plasma column,is observed. When the shorter focal length lens is used, a high density plasma isgenerated near the geometrical focus and coexists with a weak plasma channel of the filamemt. Under thetightest focusing condition, filamentation is prevented and only a strong plasma volume appears at tehgeometrical focus.     

Relative carrier-envelope phase dependence of resonant propagation of two-colour femtosecond pulses in V-type atomic medium

Using numerical solution of the full Maxwell--Bloch equations, which is obtained by the finite-difference time-domain method and the iterative predictor--corrector method, we investigate the modulation effect of relative carrier--envelope phase (hereinafter referred to as the relative phase) on resonant propagation of two-colour femtosecond ultrashort laser pulses in a V-type three-level atomic medium. It is found that the pulse splitting occurs for a smaller value of relative phase; when the value of relative phase increases to a certain value, only the variation of pulse shape is present and the pulse splitting does not occur any more; moreover, when the value of relative phase is smaller, the pulse group velocity is larger. The relative phase also has an obvious effect on population and spectral property. Different population transfers can be realized by adjusting the value of relative phase. Generally speaking, for the pulses with smaller areas their spectral strengths and frequency ranges decrease obviously with the value of relative phase increasing; for the pulses with larger areas, with value of the relative phase increasing, their spectral strengths decrease remarkably but the relative strengths of the higher frequency components increase significantly, while the spectral frequency range is not varied evidently.     

Multifilamentation of high-power femtosecond laser pulse in turbulent atmosphere with aerosol

The filamentation of a femtosecond laser pulse in atmosphere under the joint influence of turbulence and aerosol has been numerically studied for the first time. A result of these studies is that the presence of aerosol in a turbulent atmosphere increases the distance to the onset of multifilamentation. We have studied the competition between two factors of aerosol coherent scattering in the process of multiple filamentation of a femtosecond pulse in the atmosphere: generation of light field perturbations and energy losses. Similarity parameters have been determined for different conditions in the problem of multifilamentation in aerosol.     

Fabrication of micro/nano crystalline ITO structures by femtosecond laser pulses

A method is proposed for the fabrication of micro/nano crystalline indium tin oxide (c-ITO) structures using a Ti:Sapphire laser with a repetition rate of 1 kHz and a wavelength of 800 nm. In the proposed approach, an amorphous ITO (a-ITO) thin film is transformed into a c-ITO micro/nano structure over a predetermined area via laser beam irradiation, and the residual a-ITO thin film is then removed using an etchant solution. The fabricated c-ITO structures are observed using scanning electron microscopy (SEM) and cross-sectional transmission electron microscopy (TEM). The observation results show that the use of a low repetition rate laser induces a high thermal cycling effect within the ITO film and therefore prompts the formation of micro-cracks in the c-ITO structure. In addition, it is shown that as the laser power approaches the ablation threshold of the a-ITO thin film, nanogratings and disordered nanostructures are formed along the center lines of the c-ITO patterns formed using linearly polarized and circularly polarized laser beam irradiation, respectively. The nanogratings are found to have a period of approximately 200 nm (i.e. one-quarter of the irradiation wavelength), while the nanostructures have an average diameter of approximately 100–160 nm.     

Arrest of self-focusing collapse in femtosecond air filaments: higher order Kerr or plasma defocusing?

Experimentally measured conical emission rings on the blue side of the filament supercontinuum of a 800 nm 50 fs pulse in air are reproduced in simulations with plasma and the third-order Kerr as the nonlinear terms. This agreement indicates plasma as the dominant mechanism arresting the self-focusing collapse. The higher order Kerr terms with the recently measured coefficients stop the collapse at a lower intensity than the plasma does and lead to the spherical angle-wavelength spectrum without blueshifted rings.     

Cleaning of artificially soiled paper using nanosecond, picosecond and femtosecond laser pulses

Cleaning of cultural assets, especially fragile organic materials like paper, is a part of the conservation process. Laser radiation as a non-contact tool offers prospects for that purpose. For the studies presented here, paper model samples were prepared using three different paper types (pure cellulose, rag paper, and wood-pulp paper). Pure cellulose serves as reference material. Rag and wood-pulp paper represent essential characteristics of the basic materials of real-world artworks. The papers were mechanically soiled employing pulverized charcoal. Pure and artificially soiled paper samples were treated with laser pulses of 28 fs (800 nm wavelength) and 8–12 ns (532 nm) duration in a multi pulse approach. Additionally, the cellulose reference material was processed with 30 ps (532 nm) laser pulses. Damage and cleaning thresholds of pure and soiled paper were determined for the different laser regimes. Laser working ranges allowing for removal of contamination and avoiding permanent modification to the substrate were found. The specimens prior and after laser illumination were characterized by light-optical microscopy (OM) and scanning electron microscopy (SEM) as well as multi spectral imaging analysis. The work extends previous nanosecond laser cleaning investigations on paper into the ultra-short pulse duration domain.     

Theoretical investigation of flame propagation through compositionally stratified methane–air mixtures

Flame propagation speeds in compositionally stratified methane–air mixtures were theoretically calculated as a function of the equivalence ratio distribution in the unburnt mixture and compared with experimental results. A solution of non-adiabatic flame propagation under a quasi-steady approximation was able qualitatively to describe the experimentally observed characteristics of flame speeds in stratified mixtures, which were flame speed increase in the vicinity of the flammability limits as well as for high equivalence ratio gradients. However, this analysis failed to provide quantitative agreement with the experimental results. In order to address this, the cumulative heat support effects on flame temperature, depending on the history of flame propagation, had to be accounted for. Quantitative agreement with the experiments was achieved, especially for propagation in lean mixtures.     

High-order harmonics in static gas target by 795-nm Ti:sapphire femtosecond laser pulses

The 5th-23sd high-order harmonics generation in rare gases in static gas target with 120-fs, 85-mJ/pulse, 10-Hz laser system was investigated. Compared with the traditional gas target, static gas target is simple to be used in experiment, and the experimental parameters can be easily controlled. The effects on high-order harmonics due to laser intensities (energy), polarization, gas densities, confocal parameter, and phase mismatch were studied in this paper.     

Two-photon excited spectroscopies of ex vivo human skin endogenous species irradiated by femtosecond laser pulses

Two-photon excited spectroscopies from ex vivo human skin are investigated by using a femtosecond laser and a confocal microscope (Zeiss LSM 510 META). In the dermis, collagen is responsible for second harmonic generation (SHG); elastin, nicotinamide adenine dinucleotide (NADH), melanin and porphyrin are the primary endogenous sources of two-photon excited autofluorescence. In the epidermis, keratin, NADH, melanin and porphyrins contribute to autofluorescence signals. The results also show that the SHG spectra have the ability to shift with the excitation wavelength and the autofluorescence spectra display a red shift of the spectral peaks when increasing the excitation wavelength. These results may have practical implications for diagnosis of skin diseases.