A non-radical mechanism for methane hydroxylation at the diiron active site of soluble methane monooxygenase

We propose a non‐radical mechanism for the conversion of methane into methanol by soluble methane monooxygenase (sMMO), the active site of which involves a diiron active center. We assume the active site of the MMOH_Q intermediate, exhibiting direct reactivity with the methane substrate, to be a bis(μ‐oxo)diiron(IV ) complex in which one of the iron atoms is coordinatively unsaturated (five‐coordinate). Is it reasonable for such a diiron complex to be formed in the catalytic reaction of sMMO? The answer to this important question is positive from the viewpoint of energetics in density functional theory (DFT) calculations. Our model thus has a vacant coordination site for substrate methane. If MMOH_Q involves a coordinatively unsaturated iron atom at the active center, methane is effectively converted into methanol in the broken‐symmetry singlet state by a non‐radical mechanism; in the first step a methane C? H bond is dissociated via a four‐centered transition state (TS1) resulting in an important intermediate involving a hydroxo ligand and a methyl ligand, and in the second step the binding of the methyl ligand and the hydroxo ligand through a three‐centered transition state (TS2) results in the formation of a methanol complex. This mechanism is essentially identical to that of the methane–methanol conversion by the bare FeO⁺ complex and relevant transition metal–oxo complexes in the gas phase. Neither radical species nor ionic species are involved in this mechanism. We look in detail at kinetic isotope effects (KIEs) for H atom abstraction from methane on the basis of transition state theory with Wigner tunneling corrections.     

Substrate‐Dependent H/D Kinetic Isotope Effects and the Role of the Di(μ‐oxo)diiron(IV) Core in Soluble Methane Monooxygenase: A Theoretical Study

Soluble methane monooxygenase (sMMO) is an enzyme that converts alkanes to alcohols using a di(μ‐oxo)diiron(IV) intermediate Q at the active site. Very large kinetic isotope effects (KIEs) indicative of significant tunneling are observed for the hydrogen transfer (H‐transfer) of CH₄ and CH₃CN; however, a relatively small KIE is observed for CH₃NO₂. The detailed mechanism of the enzymatic H‐transfer responsible for the diverse range of KIEs is not yet fully understood. In this study, variational transition‐state theory including the multidimensional tunneling approximation is used to calculate rate constants to predict KIEs based on the quantum‐mechanically generated intrinsic reaction coordinates of the H‐transfer by the di(μ‐oxo)diiron(IV) complex. The results of our study reveal that the role of the di(μ‐oxo)diiron(IV) core and the H‐transfer mechanism are dependent on the substrate. For CH₄, substrate binding induces an electron transfer from the oxygen to one Fe^IV center, which in turn makes the μ‐O ligand more electrophilic and assists the H‐transfer by abstracting an electron from the C?H σ orbital. For CH₃CN, the reduction of Fe^IV to Fe^III occurs gradually with substrate binding and H‐transfer. The charge density and electrophilicity of the μ‐O ligand hardly change upon substrate binding; however, for CH₃NO₂, there seems to be no electron movement from μ‐O to Fe^IV during the H‐transfer. Thus, the μ‐O ligand appears to abstract a proton without an electron from the C?H σ orbital. The calculated KIEs for CH₄, CH₃CN, and CH₃NO₂ are 24.4, 49.0, and 8.27, respectively, at 293 K, in remarkably good agreement with the experimental values. This study reveals that diverse KIE values originate mainly from tunneling to the same di(μ‐oxo)diiron(IV) core for all substrates, and demonstrate that the reaction dynamics are essential for reproducing experimental results and understanding the role of the diiron core for methane oxidation in sMMO.     

Modeling dioxygen-activating centers in non-heme diiron enzymes: carboxylate shifts in diiron(II) complexes supported by sterically hindered carboxylate ligands

General synthetic routes are described for a series of diiron(II) complexes supported by sterically demanding carboxylate ligands 2,6-di(p-tolyl)benzoate (Ar(Tol)CO(2)(-)) and 2,6-di(4-fluorophenyl)benzoate (Ar(4-FPh)CO(2)(-)). The interlocking nature of the m-terphenyl units in self-assembled [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (L = C(5)H(5)N (4); 1-MeIm (5)) promotes the formation of coordination geometries analogous to those of the non-heme diiron cores in the enzymes RNR-R2 and Delta 9D. Magnetic susceptibility and M?ssbauer studies of 4 and 5 revealed properties consistent with weak antiferromagnetic coupling between the high-spin iron(II) centers. Structural studies of several derivatives obtained by ligand substitution reactions demonstrated that the [Fe(2)(O(2)CAr')(4)L(2)] (Ar' = Ar(Tol); Ar(4-FPh)) module is geometrically flexible. Details of ligand migration within the tetracarboxylate diiron core, facilitated by carboxylate shifts, were probed by solution variable-temperature (19)F NMR spectroscopic studies of [Fe(2)(mu-O(2)CAr(4-FPh))(2)-(O(2)CAr(4-FPh))(2)(THF)(2)] (8) and [Fe(2)(mu-O(2)CAr(4-FPh))(4)(4-(t)BuC(5)H(4)N)(2)] (12). Dynamic motion in the primary coordination sphere controls the positioning of open sites and regulates the access of exogenous ligands, processes that also occur in non-heme diiron enzymes during catalysis.     

Determination of the hydration number of gadolinium(III) complexes by high-field pulsed 17O ENDOR spectroscopy.

Pulsed 17O Mims electron-nuclear double resonance (ENDOR) spectroscopy at the W band (95 GHz) and D band (130 GHz) is used for the direct determination of the water coordination number (q) of gadolinium-based magnetic resonance imaging (MRI) contrast agents. Spectra of metal complexes in frozen aqueous solutions at approximately physiological concentrations can be obtained either in the presence or absence of protein targets. This method is an improvement over the 1H ENDOR method described previously, which involved the difference ENDOR spectrum of exchangeable protons from spectra taken in H2O and D2O. In addition to exchangeable water protons, the 1H ENDOR method is also sensitive to other exchangeable protons, and it is shown here that this method can overestimate hydration numbers for complexes with exchangeable protons at GdH distances similar to that of the coordinated water, for example, from NH groups. The 17O method does not suffer from this limitation. 17O ENDOR spectroscopy is applied to Gd(III) complexes containing zero, one, or two inner-sphere water molecules. In addition, 13C and 1H ENDOR studies were performed to assess the extent of methanol coordination, since methanol is used to produce a glass in these experiments. Under the experimental conditions used for the hydration number determination (30 mol % methanol), fewer than 15 % of the coordination sites were found to be occupied by methanol.     

X-ray crystal structures of reduced rubrerythrin and its azide adduct: a structure-based mechanism for a non-heme diiron peroxidase

Rubrerythrin (Rbr) is a 44-kDa homodimeric protein, found in many air-sensitive bacteria and archaea, which contains a unique combination of a rubredoxin-like [Fe(SCys)(4)] site and a non-sulfur, oxo/dicarboxylato-bridged diiron site. The diiron site structure resembles those found in O2-activating diiron enzymes. However, Rbr instead appears to function as a hydrogen peroxide reductase (peroxidase). The diferrous site in all-ferrous Rbr (Rbr(red)) shows a much greater reactivity with H2O2 than does the diferric site in all-ferric Rbr (Rbr(ox)), but only the latter structure has been reported. Here we report the X-ray crystal structures of the recombinant Rbr(red) from the sulfate reducing bacterium, Desulfovibrio vulgaris, as well as its azide adduct (Rbr(red)N3). We have also redetermined the structure of Rbr(ox) to a higher resolution than previously reported. The structural differences between Rbr(ox) and Rbr(red) are localized entirely at the diiron site. The most striking structural change upon reduction of the diferric to the diferrous site of Rbr is a 1.8-A movement of one iron away from a unique glutamate carboxylate ligand and toward a trans-disposed histidine side chain, which replaces the glutamate as a ligand. This movement increases the inter-iron distance from 3.3 to 4 A. Rbr(red)N(3) shows this same iron movement and His-->Glu ligand replacement relative to Rbr(ox), and, in addition, an azide coordinated to the diiron site in a cis mu-1,3 fashion, replacing two solvent ligands in Rbr(red). Relative to those in O2-activating enzymes, the bridging carboxylate ligation of the Rbr diiron site is less flexible upon diferric/diferrous interconversion. The diferrous site is also much more rigid, symmetrical, and solvent-exposed than those in O2-activating enzymes. On the basis of these unique structural features, a mechanism is proposed for facile reduction of hydrogen peroxide by Rbr involving a cis mu-eta(2) H2O2 diferrous intermediate.     

Demonstration by 2H ENDOR spectroscopy that myo-inositol binds via an alkoxide bridge to the mixed-valent diiron center of myo-inositol oxygenase

myo-Inositol oxygenase (MIOX) is a non-heme diiron oxygenase that cleaves cyclohexane-(1,2,3,5/4,6-hexa)-ol (myo-inositol, MI) to d-glucuronate. Here, we use 2H ENDOR spectroscopy to demonstrate that MI binds to the diiron(II/III) cofactor of MIOX via an alkoxide bridge, most likely involving O1. Analysis shows that MI adopts a symmetrical geometry in which the O-C-2H plane of the bridge is approximately orthogonal to the Fe-O-Fe plane.     

Reaction of (mu-oxo)diiron(III) core with CO2 in N-methylimidazole: formation of mono(mu-carboxylato)(mu-oxo)diiron(III) complexes with N-methylimidazole as ligands

Several iron(III) complexes with N-methylimidazole (N-MeIm) as the ligand have been synthesized by using N-MeIm as the solvent. Under anaerobic conditions, [Fe(N-MeIm)(6)](ClO(4))(3) (1) reacts with stoichiometric amounts of water in N-MeIm to afford the (mu-oxo)diiron(III) complex, [Fe(2)(mu-O)(N-MeIm)(10)](ClO(4))(4) (3). Exposure of a solution of 3 in N-MeIm to stoichiometric and excess CO(2) gives rise to the (mu-oxo)(mu-carboxylato)diiron(III) species [Fe(2)(mu-O)(mu-HCO(2))(N-MeIm)(8)](ClO(4))(3) (4) and the methyl carbonate complex [Fe(2)(mu-O)(mu-CH(3)OCO(2))(N-MeIm)(8)](ClO(4))(3) (5), respectively. Formation of the formato-bridged complex 4 upon fixation of CO(2) by 3 in N-MeIm is unprecedentated. Methyl transfer from N-MeIm to a bicarbonato-bridged (mu-oxo)diiron(III) intermediate appears to give rise to 5. Complex 3 is a good starting material for the synthesis of (mu-oxo)mono(mu-carboxylato)diiron(III) species [Fe(2)(mu-O)(mu-RCO(2))(N-MeIm)(8)](ClO(4))(3) (where R = H (4), CH(3) (6), or C(6)H(5) (7)); addition of the respective carboxylate ligand in stoichiometric amount to a solution of 3 in N-MeIm affords these complexes in high yields. Attempts to add a third bridge to complexes 4, 6, and 7 to form the (mu-oxo)bis(mu-carboxylato)diiron(III) species result in the isolation of the previously known triiron(III) mu-eta(3)-oxo clusters [[Fe(mu-RCO(2))(2)(N-MeIm)](3)O](ClO(4)) (8). The structures of 3, 4, 6, and 7 allow one, for the first time, to inspect the various features of the [Fe(2)(mu-O)(mu-RCO(2))](3+) moiety with no strain from the ligand framework.     

High-frequency (140-GHz) time domain EPR and ENDOR spectroscopy: the tyrosyl radical-diiron cofactor in ribonucleotide reductase from yeast

High-frequency pulsed EPR and ENDOR have been employed to characterize the tyrosyl radical (Y*)-diiron cofactor in the Y2-containing R2 subunit of ribonucleotide reductase (RNR) from yeast. The present work represents the first use of 140-GHz time domain EPR and ENDOR to examine this system and demonstrates the capabilities of the method to elucidate the electronic structure and the chemical environment of protein radicals. Low-temperature spin-echo-detected EPR spectra of yeast Y* reveal an EPR line shape typical of a tyrosyl radical; however, when compared with the EPR spectra of Y* from E. coli RNR, a substantial upfield shift of the g(1)-value is observed. The origin of the shift in g(1) was investigated by 140-GHz (1)H and (2)H pulsed ENDOR experiments of the Y2-containing subunit in protonated and D(2)O-exchanged buffer. (2)H ENDOR spectra and simulations provide unambiguous evidence for one strongly coupled (2)H arising from a bond between the radical and an exchangeable proton of an adjacent residue or a water molecule. Orientation-selective 140-GHz ENDOR spectra indicate the direction of the hydrogen bond with respect to the molecular symmetry axes and the bond length (1.81 A). Finally, we have performed saturation recovery experiments and observed enhanced spin lattice relaxation rates of the Y* above 10 K. At temperatures higher than 20 K, the relaxation rates are isotropic across the EPR line, a phenomenon that we attribute to isotropic exchange interaction between Y* and the first excited paramagnetic state of the diiron cluster adjacent to it. From the activation energy of the rates, we determine the exchange interaction between the two irons of the cluster, J(exc) = -85 cm(-)(1). The relaxation mechanism and the presence of the hydrogen bond are discussed in terms of the differences in the structure of the Y*-diiron cofactor in yeast Y2 and other class I R2s.     

From protein denaturant to protectant: comparative molecular dynamics study of alcohol/protein interactions

It is well known that alcohols can have strong effects on protein structures. For example, monohydric methanol and ethanol normally denature, whereas polyhydric glycol and glycerol protect, protein structures. In a recent combined theoretical and NMR experimental study, we showed that molecular dynamics simulations can be effectively used to understand the molecular mechanism of methanol denaturing protein. In this study, we used molecular dynamics simulations to investigate how alcohols with varied hydrophobicity and different numbers of hydrophilic groups (hydroxyl groups) exert effects on the structure of the model polypeptide, BBA5. First, we showed that methanol and trifluoroethanol (TFE) but not glycol or glycerol disrupt hydrophobic interactions. The latter two alcohols instead protect the assembly of the α- and β-domains of the polypeptide. Second, all four alcohols were shown to generally increase the stability of secondary structures, as revealed by the increased number of backbone hydrogen bonds formed in alcohol/water solutions compared to that in pure water, although individual hydrogen bonds can be weakened by certain alcohols, such as TFE. The two monohydric alcohols, methanol and TFE, display apparently different sequence-dependence in affecting the backbone hydrogen bond stability: methanol tends to enhance the stability of backbone hydrogen bonds of which the carbonyl groups are from polar residues, whereas TFE tends to stabilize those involving non-polar residues. These results demonstrated that subtle differences in the solution environment could have distinct consequences on protein structures.     

A Study of the Solvation Structure of l‐Leucine in Alcohol–Water Binary Solvents through Molecular Dynamics Simulations and FTIR and NMR Spectroscopy

The solvation structures of l ‐leucine (Leu) in aliphatic‐alcohol–water and fluorinated‐alcohol–water solvents are elucidated for various alcohol contents by using molecular dynamics (MD) simulations and IR, and ¹H and ¹³C NMR spectroscopy. The aliphatic alcohols included methanol, ethanol, and 2‐propanol, whereas the fluorinated alcohols were 2,2,2‐trifluoroethanol and 1,1,1,3,3,3‐hexafluoro‐2‐propanol. The MD results show that the hydrophobic alkyl moiety of Leu is surrounded by the alkyl or fluoroalkyl groups of the alcohol molecules. In particular, TFE and HFIP significantly solvate the alkyl group of Leu. IR spectra reveal that the Leu C?H stretching vibration blueshifts in fluorinated alcohol solutions with increasing alcohol content, whereas the vibration redshifts in aliphatic alcohol solutions. When the C?H stretching vibration blueshifts in the fluorinated alcohol solutions, the hydrogen and carbon atoms of the Leu alkyl group are magnetically shielded. Consequently, TFE and HFIP molecules may solvate the Leu alkyl group through the blue‐shifting hydrogen bonds.     

Oxidation of sulfide, phosphine, and benzyl substrates tethered to N-donor pyridine ligands in carboxylate-bridged diiron(II) complexes

Substituted pyridines were employed to prepare a series of terphenylcarboxylate-bridged diiron(II) compounds to mimic aspects of the chemistry at the active sites of bacterial multicomponent monooxygenases, including soluble methane monooxygenase (sMMO) and toluene monooxygenase (ToMO). Complexes of general formula [Fe2(O2CArTol)4L], L = 2, 3, or 4-pyridyldiphenylphosphine, 2-pyridylphenylsulfide, or 2-benzylpyridine and ArTol = 2,6-di(p-tolyl)benzoate, were synthesized and characterized by X-ray crystallography. Upon exposure of these compounds to dioxygen, ligand oxidation ensued and, in one case, proceeded catalytically.     

DNA hydrolytic cleavage by the diiron(III) complex Fe(2)(DTPB)(mu-O)(mu-Ac)Cl(BF(4))(2): comparison with other binuclear transition metal complexes

The binuclear structure of Fe(2)(DTPB)(mu-O)(mu-Ac)Cl(BF(4))(2) (DTPB = 1,1,4,7,7-penta (2'-benzimidazol-2-ylmethyl)-triazaheptane, Ac = acetate) was characterized by UV-visible absorption and infrared spectra and NMR and ESR. The binding interaction of DNA with the diiron complex was examined spectroscopically. Supercoiled and linear DNA hydrolytic cleavage by the diiron complex is supported by the evidence from anaerobic reactions, free radical quenching, high performance liquid chromatography experiments, and enzymatic manipulation such as T4 ligase ligation, 5'-(32)P end-labeling, and footprinting analysis. The estimation of rate for the supercoiled DNA double strand cleavage shows one of the largest known rate enhancement factors, approximately 10(10) against DNA. Moreover, the DNA hydrolysis chemistry needs no coreactant such as hydrogen peroxide. The poor sequence-specific DNA cleavage indicated by the restriction analysis of the pBR322 DNA linearized by the diiron complex might be due to the diiron complex bound to DNA by a coordination of its two ferric ions to the DNA phosphate oxygens, as suggested by spectral characterizations. The hydrolysis chemistry for a variety of binuclear metal complexes including Fe(2)(DTPB)(mu-O)(mu-Ac)Cl(BF(4))(2) is compared. It is established that the dominant factors for the DNA hydrolysis activities of the binuclear metal complexes are the mu-oxo bridge, labile and anionic ligands, and open coordination site(s). Concerning the hydrolytic mechanisms, the diiron complex Fe(2)(DTPB)(mu-O)(mu-Ac)Cl(BF(4))(2) might share many points in common with the native purple acid phosphatases.     

Water affects the stereochemistry and dioxygen reactivity of carboxylate-rich diiron(II) models for the diiron centers in dioxygen-dependent non-heme enzymes

Carboxylate-bridged high-spin diiron(II) complexes with distinctive electronic transitions were prepared by using 4-cyanopyridine (4-NCC(5)H(4)N) ligands to shift the charge-transfer bands to the visible region of the absorption spectrum. This property facilitated quantitation of water-dependent equilibria in the carboxylate-rich diiron(II) complex, [Fe(2)(mu-O(2)CAr(Tol))(4)(4-NCC(5)H(4)N)(2)] (1), where (-)O(2)CAr(Tol) is 2,6-di-(p-tolyl)benzoate. Addition of water to 1 reversibly shifts two of the bridging carboxylate ligands to chelating terminal coordination positions, converting the structure from a paddlewheel to a windmill geometry and generating [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-NCC(5)H(4)N)(2)(H(2)O)(2)] (3). This process is temperature dependent in solution, rendering the system thermochromic. Quantitative treatment of the temperature-dependent spectroscopic changes over the temperature range from 188 to 298 K in CH(2)Cl(2) afforded thermodynamic parameters for the interconversion of 1 and 3. Stopped flow kinetic studies revealed that water reacts with the diiron(II) center ca. 1000 time faster than dioxygen and that the water-containing diiron(II) complex reacts with dioxygen ca. 10 times faster than anhydrous analogue 1. Addition of {H(OEt(2))(2)}{B}, where B(-) is tetrakis(3,5-di(trifluoromethyl)phenyl)borate, to 1 converts it to [Fe(2)(mu-O(2)CAr(Tol))(3)(4-NCC(5)H(4)N)(2)](B) (5), which was also structurally characterized. Mossbauer spectroscopic investigations of solid samples of 1, 3, and 5, in conjunction with several literature values for high-spin iron(II) complexes in an oxygen-rich coordination environment, establish a correlation between isomer shift, coordination number, and N/O composition. The products of oxygenating 1 in CH(2)Cl(2) were identified crystallographically to be [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-NCC(5)H(4)N)(2)].2(HO(2)CAr(Tol)) (6) and [Fe(6)(mu-O)(2)(mu-OH)(4)(mu-O(2)CAr(Tol))(6)(4-NCC(5)H(4)N)(4)Cl(2)] (7).     

High-valent diiron species generated from N-bridged diiron phthalocyanine and H(2)O(2)

N-bridged diiron tetra-tert-butylphthalocyanine activates H(2)O(2) to form anionic hydroperoxo complex [(Pc)Fe(IV)=N-Fe(III)(Pc)-OOH](-) prone to heterolytic cleavage of O-O bond with the release of OH(-) and formation of neutral diiron oxo phthalocyanine cation radical complex, PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. ESI-MS data showed stability of the Fe-N-Fe binuclear structure upon formation of this species, capable of oxidizing methane and benzene via O-atom transfer. The slow formation kinetics and the high reactivity preclude direct detection of this oxo complex by low temperature UV-vis spectroscopy. However, strong oxidizing properties and the results of EPR study support the formation of PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. Addition of H(2)O(2) at -80 °C led to the disappearance of iron EPR signal and to the appearance of the narrow signal at g = 2.001 consistent with the transient formation of PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. In the course of this study, another high valent diiron species was prepared in the solid state with 70% yield. The M?ssbauer spectrum shows two quadrupole doublets with δ(1) = -0.14 mm s(-1), ΔE(Q1) = 1.57 mm s(-1) and δ(2) = -0.10 mm s(-1), ΔE(Q2) = 2.03 mm s(-1), respectively. The negative δ values are consistent with formation of Fe(iv) states. Fe K-edge EXAFS spectroscopy reveals conservation of the diiron Fe-N-Fe core. In XANES, an intense 1s → 3d pre-edge feature at 7114.4 eV suggests formation of Fe(iv) species and attaching of one oxygen atom per two Fe atoms at the 1.90 ? distance. On the basis of M?ssbauer, EPR, EXAFS and XANES data this species was tentatively assigned as (Pc)Fe(IV)=N-Fe(IV)(Pc)-OH which could be formed from PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O by hydrogen atom abstraction from a solvent molecule. Thus, despite unfavourable kinetics, we succeeded in the preparation of the first dirion(iv) phthalocyanine complex with oxygen ligand, generated in the (Pc)Fe(IV)=N-Fe(III)(Pc) - H(2)O(2) system capable of oxidizing methane.     

EPR and endor studies of cobaloxime(II)

EPR and ENDOR studies were carried out on bis (dimethylglyoximato) cobalt (II) in various frozen solvents. The anisotropic EPR spectra, from which the principal values of the g and ⁵⁹Co hyperfine tensors were determined, enabled orientationally selected ¹H ENDOR spectra to be obtained. In a tetrahydrofuran (THF)/toluene matrix, THF was shown to be axially coordinated to the metal (R_Co-O(THF) = 0.22 nm) with the THF plane at an angle of ≈55° to the yz plane and retention of symmetry about the xz plane. ¹H ENDOR of the dimethylglyoximate ligands yielded information about the H-bond geometry and in-plane assignment of the principal values of the g tensor.     

ENDOR characterization of a synthetic diiron hydrazido complex as a model for nitrogenase intermediates

Molybdenum-dependent nitrogenase binds and reduces N2 at the [Fe7, Mo, S9, X, homocitrate] iron-molybdenum cofactor (FeMo-co). Kinetic and spectroscopic studies of nitrogenase variants indicate that a single Fe-S face is the most likely binding site. Recently, substantial progress has been made in determining the structures of nitrogenase intermediates formed during alkyne and N2 reduction through use of ENDOR spectroscopy. However, constraints derived from ENDOR studies of biomimetic complexes with known structure would powerfully contribute in turning experimentally derived ENDOR parameters into structures for species bound to FeMo-co during N2 reduction. The first report of a paramagnetic Fe-S compound that binds reduced forms of N2 involved Fe complexes stabilized by a bulky beta-diketiminate ligand (Vela, J.; Stoian, S.; Flaschenriem, C. J.; Münck, E.; Holland, P. L. J. Am. Chem. Soc. 2004, 126, 4522-4523). Treatment of a sulfidodiiron(II) complex with phenylhydrazine gave an isolable mixed-valence FeII-Fe(III) complex with a bridging phenylhydrazido (PhNNH2) ligand, and this species now has been characterized by ENDOR spectroscopy. Using both 15N, 2H labeled and unlabeled forms of the hydrazido ligand, the hyperfine and quadrupole parameters of the -N-NH2 moiety have been derived by a procedure that incorporates the (near-) mirror symmetry of the complex and involves a strategy which combines experiment with semiempirical and DFT computations. The results support the use of DFT computations in identifying nitrogenous species bound to FeMo-co of nitrogenase turnover intermediates and indicate that 14N quadrupole parameters from nitrogenase intermediates will provide a strong indication of the nature of the bound nitrogenous species. Comparison of the large 14N hyperfine couplings measured here with that of a hydrazine-derived species bound to FeMo-co of a trapped nitrogenase intermediate suggests that the ion(s) are not high spin and/or that the spin coupling coefficients of the coordinating cofactor iron ion(s) in the intermediate are exceptionally small.     

ENDOR study of bis(acetylacetonato)oxovanadium (IV) in frozen liquid crystals

An ENDOR study of vanadyl bisacetylacetonate (VO(acac)₂) aligned in frozen nematic liquid cystals shows enhanced ENDOR signal intensities, which may aid in the interpretation of powder ENDOR spectra obtained from transition-metal complexes in isotropic glasses. The ENDOR spectra establish that VO(acac)₂ is present in the form of an adduct with the solvent molecules. The adduct formation may affect the alignment of the solute molecules in the liquid crystal.     

Nitrosyl derivatives of diiron(I) dithiolates mimic the structure and Lewis acidity of the [FeFe]-hydrogenase active site

This study probes the impact of electronic asymmetry of diiron(I) dithiolato carbonyls. Treatment of Fe2(S2C(n)H(2n))(CO)(6-x)(PMe3)x compounds (n = 2, 3; x = 1, 2, 3) with NOBF4 gave the derivatives [Fe2(S2C(n)H(2n))(CO)(5-x)(PMe3)x(NO)]BF4, which are electronically unsymmetrical because of the presence of a single NO(+) ligand. Whereas the monophosphine derivative is largely undistorted, the bis(PMe3) derivatives are distorted such that the CO ligand on the Fe(CO)(PMe3)(NO)(+) subunit is semibridging. Two isomers of [Fe2(S2C3H6)(CO)3(PMe3)2(NO)]BF4 were characterized spectroscopically and crystallographically. Each isomer features electron-rich Fe(CO)2PMe3 and electrophilic Fe(CO)(PMe3)(NO)(+) subunits. These species are in equilibrium with an unobserved isomer that reversibly binds CO (DeltaH = -35 kJ/mol, DeltaS = -139 J mol(-1) K(-1)) to give the symmetrical adduct [Fe2(S2C3H6)(mu-NO)(CO)4(PMe3)2]BF4. In contrast to Fe2(S2C3H6)(CO)4(PMe3)2, the bis(PMe3) nitrosyl complexes readily undergo CO substitution to give the (PMe3)3 derivatives. The nitrosyl complexes reduce at potentials that are approximately 1 V milder than their carbonyl counterparts. Results of density functional theory calculations, specifically natural bond orbital analysis, reinforce the electronic resemblance of the nitrosyl complexes to the corresponding mixed-valence diiron complexes. Unlike other diiron dithiolato carbonyls, these species undergo reversible reductions at mild potentials. The results show that the novel structural and chemical features associated with mixed-valence diiron dithiolates (the so-called H(ox) models) can be replicated in the absence of mixed-valency by the introduction of electronic asymmetry.     

Low‐Molecular‐Weight Analogues of the Soluble Methane Monooxygenase (sMMO): From the Structural Mimicking of Resting States and Intermediates to Functional Models

The active centre of sMMO contains a diiron core ligated by histidine and glutamate residues, which is capable of catalysing a remarkable reaction: the oxidation of methane with O₂ yielding methanol. This review describes the results of efforts to prepare low‐molecular‐weight analogues of this active site directing towards 1) the assignment of the spectroscopic signatures identified for certain intermediates of the sMMO catalytic cycle to structural features and 2) the synthesis of molecular compounds that can mimic the reactivity. The historical development of the model chemistry, which is subdivided into structural and functional mimicking, is illustrated and achievements reached so far are highlighted.     

Mechanistic study of iron(III) [tetrakis(pentafluorophenyl)porphyrin triflate (F(20)TPP)Fe(OTf) catalyzed cyclooctene epoxidation by hydrogen peroxide

We have recently proposed a mechanism for the epoxidation of cyclooctene by H2O2 catalyzed by iron(III) [tetrakis(pentafluorophenyl)]porphyrin chloride, (F20TPP)FeCl, in solvent containing methanol [Stephenson, N. A.; Bell, A.T. Inorg. Chem. 2006, 45, 2758-2766]. In that study, we found that catalysis did not occur unless (F20TPP)FeCl first dissociated, a process facilitated by the solvation of the Cl- anion by methanol and the coordination of methanol to the (F20TPP)Fe+ cation. Methanol as well as other alcohols was also found to facilitate the heterolytic cleavage of the O-O bond of H2O2 coordinated to the (F20TPP)Fe+ cation via a generalized acid mechanism. In the present study, we have shown that catalytic activity of the (F20TPP)Fe+ cation can be achieved in aprotic solvent by displacing the tightly bound chloride anion with a weakly bound triflate anion. By working in an aprotic solvent, acetonitrile, it was possible to determine the rate of heterolytic O-O bond cleavage in coordinated H2O2 unaffected by the interaction of the peroxide with methanol. A mechanism is proposed for this system and is shown to be valid over a range of reaction conditions. The mechanisms for cyclooctene epoxidation and H2O2 decomposition for the aprotic and protic solvent systems are similar with the only difference being the mechanism of proton-transfer prior to heterolytic cleavage of the oxygen-oxygen bond of coordinated hydrogen peroxide. Comparison of the rate parameters indicates that the utilization of hydrogen peroxide for cyclooctene epoxidation is higher in a protic solvent than in an aprotic solvent and results in a smaller extent of porphyrin degradation due to free radical attack. It was also shown that water can coordinate to the iron porphyrin cation in aprotic systems resulting in catalyst deactivation; this effect was not observed when methanol was present, since methanol was found to displace all of the coordinated water.