Fabrication of novel multilayered thin films based on inclusion complex formation between amylose derivatives and guest polymers

Novel types of layer-by-layer (LbL) assembly films were successfully fabricated onto a solid substrate through the inclusion complex formation between partially 2,3- O-methylated amyloses (MAs) and polytetrahydrofuran (PTHF). The formation of the LbL assembly films was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy (AFM) observation, and X-ray diffraction (XRD) measurement. The film formation was significantly affected by the methylation degree of amylose. When MAs with 8 and 20% methylation were used as hosts, the formation of LbL assembly films with PTHF was clearly observed. On the other hand, MAs with more than 33% methylation barely formed LbL assembly films with PTHF.     

聚合物层状组装膜

介绍了近几年来我们研究组在层状组装膜的构筑以及功能化研究方面取得的一些最新进展.包括结合表面溶胶-凝胶技术与静电层状组装技术,实现了二阶非线性基团在层状组装多层膜中的非对称排列,制备了具有二阶非线性效应的膜材料;采用室温压印技术,发展了一种简便、经济和具有普适性的层状组装聚合物膜图案化方法;以轻度交联的聚合物微凝胶为构筑基元,制备了具有高负载量的聚合物层状组装膜;发展了一种基于离子剥离技术的层状组装自支持膜制备方法;基于层状组装技术,制备了具有超疏水和抗反射功能的涂层.     

Layer-by-layer assembly of two temperature-responsive homopolymers at neutral pH and the temperature-dependent solubility of the multilayer film

We fabricated a layer-by-layer (LbL) film of temperature-responsive homopolymers at neutral pH and studied its temperature-dependent solubility. We first measured the cloud point of mixed solutions of temperature-responsive polymers. The significant decrease of cloud point suggested that the intermolecular interaction between two polymer chains of different kinds was stronger than that between two polymer chains of the same kind. Strong intermolecular interaction between two polymer chains of different kinds is a prerequisite for LbL assembly. On the basis of the decrease of cloud point of mixed solutions of temperature-responsive homopolymers, we selected poly(N-vinylcaprolactam) (PVCL) and poly(2-hydroxypropyl acrylate) (PHPA) for LbL assembly. LbL films of the two polymers were fabricated at neutral pH at a constant temperature. When the film was immersed in purified water at a temperature lower than the assembly temperature, it can be partially dissolved with a diffusion-limited dissolution process. The temperature-responsive solubility of the LbL film is closely connected to the phase behavior of mixed solutions of the two polymers. Additionally, as compared to multilayer films of neutral polymers and poly(carboxylic acid)s, the PVCL/PHPA multilayer film is relatively stable when it was immersed in buffer solutions near physiological pH at the assembly temperature. Such LbL films with temperature-responsive solubility might be used as a dissolvable film or a smart capsule.     

Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions

Novel layer-by-layer (LbL) assembly films composed of poly( L-lysine) (PLL) and poly( D-lactic acid) (PDLA) were prepared by the alternate immersion of a gold substrate into an aqueous PLL solution and an acetonitrile solution of PDLA. The formation of the LbL assembly film was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy observation, and attenuated total reflection Fourier transform infrared spectroscopy measurement. The driving force responsible for the LbL assembly was determined by investigating the formation behavior of the LbL assembly under various conditions. The formation of the LbL assembly was not affected either by the stereochemistry of polylysine and poly(lactic acid) or by the addition of urea, which is known to inhibit hydrogen bonding interaction between polymers, into the aqueous PLL solution. The LbL assembly was also formed by the combination of PDLA and polycations other than polylysine, such as poly(diallyldimethylammonium chloride). On the other hand, the combination of PDLA and any polyanions such as poly(styrene sulfonate sodium salt) produced little corresponding LbL assembly. The increase in positive charge on the amino nitrogen atom of PLL enhanced the LbL assembly. These results suggest that the LbL assembly film composed of PLL and PDLA was fabricated by cation-dipole interactions between the positive charge on the amino nitrogen atom of PLL and the lone pairs of the carbonyl oxygen atom of PDLA.     

聚合物复合物层层组装膜

层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.聚合物复合物是基于各种分子间弱相互作用力而形成的超分子聚集体,其种类包括聚阳离子-聚阴离子复合物、聚电解质-有机小分子复合物、中性聚合物-聚合物复合物以及聚合物-无机杂化复合物等.在本文中,以作者的研究结果为基础,阐明聚合物复合物的层层组装是一种方便、快捷的功能复合膜的构筑方法,具有如下优点:(1)聚合物复合物大的尺度可以实现聚合物复合物层层组装膜的快速构筑;(2)聚合物复合物的结构在组装溶液中和成膜后都容易调控,方便聚合物复合物层层组装膜结构的精细调控.(3)聚合物复合物层层组装膜可以构筑非复合的聚合物层层组装所不能获得的膜结构及功能.     

智能响应与自修复的层层组装聚合物膜

具有刺激响应性和自修复功能的复合膜是重要的仿生功能膜材料.层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.通过结构与组成的精确调控,基于层层组装制备的微米厚度的聚电解质厚膜可以对外界刺激产生快速有效的响应,因而在制备智能仿生膜材料方面具有重要的价值.本文以作者的研究结果为基础,阐明了基于层层组装的聚电解质膜可以成功用于制备湿度和温度响应的双结构自支持膜和高效的促动器及行走机器,以及自修复超疏水和划痕修复聚电解质膜.     

Polypeptide multilayer films: role of molecular structure and charge

The role of molecular structure, charge, and hydrophobicity in polyelectrolyte layer-by-layer assembly (LbL) of thin films has been studied using the model polypeptides poly-L-glutamatic acid (PLGA) and poly-L-lysine (PLL), quartz crystal microbalance (QCM), and circular dichroism spectroscopy (CD). The adsorption behavior of PLGA and PLL has been compared with the structure of these molecules in aqueous solution under the same conditions. The data show that the deposition of polypeptide per adsorption step scales with average secondary structure content, whether alpha helix or beta sheet. This is contrary to the expectation based on the view that hydrogen bonds are crucial to polypeptide film assembly, because secondary structure formation in a polypeptide reduces its intermolecular hydrogen-bonding potential. The data also show that polypeptide adsorption scales with ionic strength and chain length. Taken together, the results increase knowledge of polypeptide-based LbL thin film fabrication and will help to provide a firmer foundation for the use of natural or designed polypeptides in LbL.     

Layer-by-layer assembled gold nanoparticle films on amine-terminated substrates

This work reports the fabrication and characterization of multilayered gold nanoparticle (AuNP) thin films on aminosilane functionalized substrates. The films are fabricated via layer-by-layer (LbL) assembly using as-synthesized, un-modified AuNPs and poly(allylamine hydrochloride) as the building blocks. While most literature reports that AuNP based LbL assemblies are constructed with a single interlayer binding force, this work shows that both coordination and electrostatic interaction are involved in the process of assembly based on X-ray photoelectron spectroscopic results. The stepwise film growth behavior is demonstrated by atomic force spectroscopy and UV-vis spectroscopy. It is found that the particles agglomerate with each other and form large clusters when the number of assembled layers increases.     

Layer-by-layer-assembled multilayer films of polyelectrolyte-stabilized surfactant micelles for the incorporation of noncharged organic dyes

Noncharged pyrene molecules were incorporated into multilayer films by first loading pyrene into poly(acrylic acid) (PAA)-stabilized cetyltrimethylammonium bromide (CTAB) micelles (noted as PAA&(Py@CTAB)) and then layer-by-layer (LbL) assembled with poly(diallyldimethylammonium chloride) (PDDA). The stable incorporation of pyrene into multilayer films was confirmed by quartz crystal microbalance (QCM) measurements and UV-vis absorption spectroscopy. The resultant PAA&(Py@CTAB)/PDDA multilayer films show an exponential growth behavior because of the increased surface roughness with increasing number of film deposition cycles. The present study will open a general and cost-effective avenue for the incorporation of noncharged species, such as organic molecules, nanoparticles, and so forth, into LbL-assembled multilayer films by using polyelectrolyte-stabilized surfactant micelles as carriers.     

流动场对膜层层组装过程的影响

分别在层层组装膜的沉积和淋洗步骤中引入流动场, 用紫外-可见光谱对多层膜的组装过程进行了跟踪, 用原子力显微镜对膜的表面粗糙度进行了观察, 用X射线反射(XRR)对膜的厚度和粗糙度进行了评估. 实验结果表明, 在沉积步骤中, 流动场可以促进高分子与组装基底的接触, 从而提升组装速度; 而在淋洗步骤中, 搅拌下的流动场不仅可以冲洗掉膜表面物理吸附的高分子, 还能够降低膜的粗糙度, 使得膜表面更加平整.     

Impedance change induced by varying polymerization temperature of conducting polymer thin films

In this study, we use a conducting polymer precursor to build layer-by-layer (LbL) films. Thermal conversion of the polymer precursor to conducting polymer makes the LbL films intractable, so the LbL films can be used as protective layers in salt solution. The conducting polymer LbL film shows stabilizing effect on top of another LbL thin film that contains nanoparticles. The LbL film prepared in this study shows a 35-fold increase of conductivity than the literature values obtained from non-conducting polymer films. The stabilization of the films is the result of the polymerization of the conducting polymer, so other anionic polymers or nanoparticles may be used to afford additional functionalities.     

Covalent molecular assembly of multilayer dendrimer ultrathin films in supercritical medium

Ultrathin films containing dendrimers are fabricated on amine- and anhydride-derivatized silicon dioxide surface through alternate layer-by-layer (LbL) assembly of pyromellitic dianhydride (PMDA) and poly(amidoamine) (PAMAM) dendrimer in supercritical carbon dioxide (SCCO2) with interlayer linkage established by covalent bonds. X-ray photoelectron and UV-visible absorption spectroscopies, atomic force microscopy (AFM), and ellipsometry were employed to study the interfacial chemistry, growth, morphology, and thickness of the assembled film. XPS analysis suggests that the PMDA/PAMAM interlayer covalent bond is established to completion, and functional surfaces for immobilization of the next layer are available after deposition of each layer. UV-visible absorption and ellipsometry revealed layer-by-layer growth of the film. The functional property film as a porous matrix was manifested in the reduction of the refractive index upon introduction of the dendrimer.     

Layer-by-layer electrochemical assembly of poly(diphenylamine)/phosphotungstic acid as ascorbic acid sensor

A layer-by-layer (LbL) film assembly was constructed that comprises alternative layers of poly(diphenylamine) (PDPA) and phosphotungstic acid (PTA). First, a layer of oxidized PDPA (referred to as PDPA(+)) was deposited by electropolymerization. Then, a layer of negatively charged PTA was deposited on the PDPA(+) layer . This processes was repeated several times to obtain multilayer LbL film (PDPA/PTA)_n, where n is the number of double layers. The LbLs were characterized by UV-Vis spectroscopy, FT-IR spectroscopy and X- ray diffraction spectroscopy. The process of formation of the LbL assembly was monitored by electrochemical methods. Electrochemical studies revealed that this LbL film possesses a remarkable electrocatalytic activity towards oxidation of ascorbic acid in neutral aqueous medium. The enhanced electrocatalytic activity of (PDPA/PTA)_n LbL film is attributed to the existence of tungsten atoms in the interlayers of PDPA.     

Drying and nondrying layer-by-layer assembly for the fabrication of sodium silicate/TiO2 nanoparticle composite films

Influences of drying and nondrying steps on structures of layer-by-layer (LbL) assembled sodium silicate/TiO(2) nanoparticles films (donated as silicate/TiO(2) films) have been systematically investigated. The nondrying LbL assembly produces highly porous silicate/TiO(2) films with large thickness. In contrast, the silicate/TiO(2) films fabricated with a drying step after each layer deposition are flat and thin without porous structures. In situ atomic force microscopy (AFM) measurements confirm that the sodium silicate and TiO(2) nanoparticles are deposited in their aggregated forms. A N(2) drying step can disintegrate the aggregated silicate and TiO(2) nanoparticles to produce thin silicate/TiO(2) films with compact structures. Without the drying steps, the aggregated silicate and TiO(2) nanoparticles are well retained, and their LbL assembly produces highly porous silicate/TiO(2) films of large thickness. The highly porous silicate/TiO(2) films are demonstrated to be useful as reusable film adsorbents for dye removal from wastewater because they can adsorb a large amount of cationic organic dyes and decompose them under UV irradiation. The present study is meaningful for exploring drying/nondrying steps for tailoring structure and functions of LbL assembled films.     

Novel solid-state polymer electrolyte consisting of a porous layer-by-layer polyelectrolyte thin film and oligoethylene glycol

A novel solid-state polymer electrolyte was constructed using layer-by-layer (LbL) polyelectrolyte assembly of linear poly(ethylenimine) (LPEI) and poly(acrylic acid) (PAA), combined with a plasticization step using oligoethylene glycol dicarboxylic acid (OEGDA). This composite film exhibits a relatively high ionic conductivity of 9.5 x 10(-5) S/cm at 25 degrees C and 22% relative humidity. Detailed characterization of the composite was undertaken using grazing-angle Fourier transform infrared (GA-FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and impedance spectroscopy. After immersing the LPEI/PAA films into OEGDA aqueous solutions, the films exhibited a swelling behavior and increased surface roughness indicative of porosity induced by reorganization of ionic interactions between LPEI and PAA in acidic solution. This internal porous structure allows inclusion of OEGDA within the multilayer and increased ionic conductivity under ambient conditions due to the combined effects of plasticization of the LbL matrix by atmospheric water as well as the added mobility of ions in molten OEGDA within the composite.     

Oligosilsesquioxanes as versatile building blocks for the preparation of self-assembled thin films

A self-assembly approach to the preparation of nanocomposite siliceous thin films by using oligosilsesquioxanes as building blocks is presented. Poly(styrene-4-sulfonate), PSS, and octa(3-aminopropyl)silsesquioxane, NSi8, were layer-by-layer (LbL) assembled onto planar substrates and polystyrene (PS) particles, thus forming composite multilayers. We have clarified the binding properties of NSi8 to PSS by examining the pH influence on film buildup by microelectrophoresis (zeta-potential) and quartz crystal microgravimetry (QCM). The regular growth of PSS/NSi8 multilayers on planar supports was confirmed by surface plasmon resonance (SPR) spectroscopy and QCM. By applying the LbL coating procedure to spherical templates, we prepared compact, microporous hollow silica spheres by calcining PS spheres coated with (poly(allylamine hydrochloride) (PAH)/PSS)(2)/(NSi8/PSS)(n) (n varying from 3 to 12), at 750 degrees C, because of sintering of the octameric clusters (NSi8). Hollow spheres derived from coatings with n = 3 drastically altered in size (relative to the template core), depending on the size of the PS particles used. The novelty of this method for the nanofabrication of siliceous films stems from the use of well-defined and discrete building blocks, such as NSi8, leading to homogeneous organic-silica composite films as well as individual siliceous particles of variable size and shape.     

Preparation parameter development for layer-by-layer assembly of Keggin-type polyoxometalates

Polyoxometalates possess many useful properties for electrochemical catalysis. These molecule-size clusters can be assembled into thin films through the layer-by-layer method. In this study, we determined a cluster concentration range within which layer-by-layer (LbL) films have been successfully fabricated. We also find the influence of salt added to the deposition solutions. In an attempt to understand the self-assembly process at the molecular level, thermodynamic arguments, derived from complexation between nanoscale particles and oppositely charged polyelectrolyte chains, have been employed to interpret the adsorption of polyoxometalate clusters onto a cationic polymer layer. The scaling results describe the contact mode between a polymer chain and a cluster. The assembly can be visualized with assistance by understanding the contact between the polymer chain and the cluster.     

Highly ion conductive poly(ethylene oxide)-based solid polymer electrolytes from hydrogen bonding layer-by-layer assembly

We report the development of a solid polymer electrolyte film from hydrogen bonding layer-by-layer (LBL) assembly that outperforms previously reported LBL assembled films and approaches battery integration capability. Films were fabricated by alternating deposition of poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) layers from aqueous solutions. Film quality benefits from increasing PEO molecular weight even into the 10(6) range due to the intrinsically low PEO/PAA cross-link density. Assembly is disrupted at pH near the PAA ionization onset, and a potential mechanism for modulating PEO:PAA ratio within assembled films by manipulating pH is discussed. Ionic conductivity of 5 x 10(-5) S/cm is achievable after short exposure to 100% relative humidity (RH) for plasticization. Adding free ions by exposing PEO/ PAA films to lithium salt solutions enhanced conductivity to greater than 10(-5) S/cm at only 52% RH and tentatively greater than 10(-4) S/cm at 100% RH. The excellent stability of PEO/PAA films even when exposed to 1.0 M salt solutions led to an exploration of LBL assembly with added electrolyte present in the adsorption step. Fortuitously, the modulation of PEO/PAA assembly by ionic strength is analogous to that of electrostatic LBL assembly and can be attributed to electrolyte interactions with PEO and PAA. Dry ionic conductivity was enhanced in films assembled in the presence of salt as compared to films that were merely exposed to salt after assembly, implying different morphologies. These results reveal clear directions for the evolution of these promising solid polymer electrolytes into elements appropriate for electrochemical power storage and generation applications.     

Electrochemical decomposition of layer-by-layer thin films composed of TEMPO-modified poly(acrylic acid) and poly(ethyleneimine)

The decomposition of layer-by-layer (LbL) thin films composed of 2,2,6,6-tetramethylpiperidine-1-oxyl free radical-appended poly(acrylic acid) (TEMPO-PAA) and poly(ethylenimine) (PEI) was studied by using a quartz crystal microbalance (QCM) and cyclic voltammetry. The electrode potential of the (PEI/TEMPO-PAA)₄/PEI film-coated Au resonator was scanned from +0.2 to +0.8 V vs Ag/AgCl. The CV showed that the oxidation peak current decreased as the number of scans increased. The change in the resonance frequency of the QCM increased after electrolysis, indicating that the film was decomposed by electrolysis. The positive charges originating from the oxoammonium ions probably destabilized the (PEI/TEMPO-PAA)₄/PEI film. Furthermore, the release of 5,10,15,20-tetraphenyl-21H,23H-porphine tetrasulfonic acid (TPPS) from TPPS-loaded (PEI/TEMPO-PAA)₄/PEI-coated ITO electrodes was investigated. TPPS was released at electrode potentials greater than +0.6 V by the decomposition of the film. The results suggest that TEMPO-PAA/PEI LbL films are suitable for electrochemically controlled drug delivery systems.