Wavelength-spacing tunable multi-wavelength fiber optical parametric oscillator based on multiple four-wave mixing

We propose a wavelength-spacing tunable multi-wavelength fiber optical parametric oscillator (MW-FOPO) with a simple line cavity and one pump source based on multiple four-wave mixing (MFWM). Stable multi-wavelength lasing at room temperature is achieved due to the four-wave mixing effect and the broadband gain of the fiber optical parametric amplifier based on a highly nonlinear fiber. The wavelength spacing of the proposed MW-FOPO can be tuned by adjusting the wavelength of the pump light or the central wavelength of the fiber Bragg grating. Seventeen lasing lines with a wavelength spacing of 2.89 nm and an extinction ratio larger than 10 dB, which covers the wavelength region from 1540 to 1568 nm is demonstrated.     

Broad and tunable multiwavelength fiber laser at the assistance of modulation-instability-assisted four-wave mixing

Based on a piece of highly-nonlinear near-zero-dispersion-flattened photonic crystal fiber (PCF), a broadly tunable multiwavelength erbium-doped fiber laser is proposed by using a bi-directionally pumping scheme. This kind of PCF induces the modulation-instability-assisted four-wave mixing to generate new wavelengths. The proposed laser with excellent stability is tunable and switchable by adjusting the fiber Bragg gratings and the variable optical attenuators. The outstanding merits of the proposed multiwavelength laser are the flexible tuning and the ultrabroad spectral range over 150 nm. Especially, the proposed laser source can work at the wavelength of less than 1460 nm, overcoming the limit of gain bandwidth of erbium-doped fiber.

     

Multi-wavelength bismuth-based erbium-doped fiber laser based on four-wave mixing effect in photonic crystal fiber

A stable multi-wavelength erbium-doped fiber laser based on four-wave mixing (FWM) in a photonic crystal fiber (PCF) is demonstrated in this paper. The phase matching condition for four-wave mixing in the photonic crystal fiber has been enhanced using a seed signal and a polarisation controller to control the states of polarisation in the ring laser cavity. At a maximum pump power of 1480 nm, 5 lines are observed with nearly 2.15 nm spacing between the lines, and with a signal to noise ratio of more than 20 dB. The number of channels and wavelength spacing can be controlled by varying the output coupler ratio.     

Multi-wavelength erbium-doped fiber laser using four-wave mixing effect in doped fiber

We demonstrate a multi-wavelength erbium-doped fiber laser (EDFL) using erbium gain and four-wave mixing (FWM) effect in a piece of erbium-doped fiber (EDF) with high erbium ion concentration. The EDF has a pump absorption rate of 24.6 dB/m at 979 nm and is bi-directionally pumped by 980-nm laser diodes. FWM effect redistributes the energy of different oscillating lines and causes multi-wavelength operation. The laser generates more than 22 lines of optical comb with a line spacing of approximately 0.10 nm at the 1569-nm region using only 1.5-m-long EDF.     

Stable multi-wavelength erbium-doped fiber laser based on dispersion-shifted fiber and Sagnac loop filter

A multi-wavelength erbium-doped fiber laser (MEDFL) with simple line structure is experimentally demonstrated by using a Sagnac interferometer as a comb filter. It is shown that the multi-wavelength lasing is quite stable at room temperature due to the four-wave mixing (FWM) effect among different laser channels in the dispersion-shifted fiber cooperated in the laser cavity.     

Full L-band coverage of multiwavelength erbium-doped fiber laser

We propose and experimentally demonstrate a dual-pass unbalanced in-line Sagnac interferometer as a novel comb filter for implements in erbium-doped fiber lasers to obtain wide wavebands of multiwavelength radiations with enhancements of signal-to-noise ratios (SNRs). The hybrid combinations of the comb filter with the two schemes of nonlinear polarization rotation and intensity dependent loss have successfully not only enlarged the lasing bandwidth up to 47 nm but also enhanced the SNR up to 40 dB. The simultaneous lasing-wavelengths of 117 channels are also obtained. The multiwavelength lasing spectra with free spectral range of 0.4 nm covering the full L-band are useful for the applications of DWDM and WDM-PON systems.     

Thermally tunable microfiber knot resonator based erbium-doped fiber laser

A compact and tunable erbium-doped fiber laser is demonstrated using a highly doped fiber and a microfiber knot resonator (MKR) structure which is laid on the surface of a small peltier. The MKR functions as both a reflector and a tunable filter where tunability is achieved by varying the temperature of the resonator by heating the peltier. A stable laser output is achieved at the 1533 nm region with an optical signal to noise ratio (OSNR) of 27 dB using a 65 mW of 980 nm pump power. The operating wavelength of the laser can be tuned from 1532.60 nm to 1533.49 nm as the temperature is increased from the room temperature of 24 to 90 °C. It is observed that the operating wavelength shifts to a longer wavelength as the temperature increases with an efficiency of 12.4 pm/°C. This is due to the thermally induced optical phase shift attributable to the changes in effective refractive index and optical path length of the MKR loop.     

All-fibre wavelength conversion based on four-wave mixing in a ring erbium-doped fibre laser

A new scheme based on four-wave mixing is presented using a ring erbium-doped fibre laser and tuneable fibre Bragg gratings that can effectively perform wavelength conversion in a wide wavelength range. An application of this wavelength-conversion architecture to optical communications is also presented. PACS 42.65.-k; 42.65.Ky     

Tunable multiwavelength erbium-doped fiber laser based on intensity-dependent loss and intra-cavity loss modulation

A tunable multiwavelength erbium-doped fiber laser is proposed and experimentally studied. The intensity-dependent loss (IDL) in a nonlinear optical loop mirror is utilized for stable multiwavelength lasing output. The accurate switch operation, i.e., the lasing lines emerge/disappear one by one at the longer wavelength side of the initial one, is achieved by adjusting the intra-cavity loss using a variable attenuator. The effect of the intra-cavity loss on the lasing characteristics is theoretically analyzed. Numerical results confirm the experiment measurements and suggest that both the IDL and the gain spectrum, which vary with the intra-cavity loss, lead to the observed tunable lasing behavior.     

Polarization controlled multiwavelength switchable erbium-doped fiber laser based on high birefringence few-mode fiber loop mirror

A multiwavelength switchable erbium-doped fiber laser with linear cavity is proposed and experimentally demonstrated. It is based on a fiber loop mirror incorporating a piece of high birefringence few-mode fiber and polarization controller. Due to dependence of its reflection properties on the polarization controllers, the fiber laser can operate in the random combination of three wavelengths by only adjusting the polarization controllers in the linear cavity. The wavelengths involved in the switching operation are determined by the merged Sagnac and intermodal interferences elicited in the fiber loop mirror. The optical signal to noise extinction ratio of every oscillation line is higher than 40 dB and power fluctuation less than 0.5 dB.     

Broadly tunable dual-wavelength erbium-doped ring fiber laser based on a high-birefringence fiber loop mirror

A broadly tunable dual-wavelength erbium-doped ring fiber laser based on a high-birefringence fiber loop mirror (HiBi-FLM) and a polarization controller is demonstrated experimentally. The measured transmission spectrum of HiBi-FLM covers a wide range from 1525 to 1575 nm. The wavelength of proposed laser can be flexibly tunable during this range of ∼50 nm by adjusting the polarization controller. In addition, the spacing of two wavelengths is adjustable by changing the length of HiBi fiber. The dual-wavelength lasers with the HiBi fiber length of 1 and 2 m are experimentally demonstrated and compared. The experimental results show that the proposed laser can stably operate on two wavelengths simultaneously at room temperature, and the output peak power variation is about 0.5 dB during 40 min.     

Nonlinear-polarization-rotation based multiwavelength erbium-doped fiber lasers with highly nonlinear fiber

A multiwavelength erbium-doped fiber laser based on nonlinear polarization rotation with incorporation of a highly nonlinear fiber has been demonstrated. Stable multi-wavelength operation at room temperature is realized owing to the intensity-dependent transmission in fiber laser with nonlinear-polarization-rotation effect. And benefiting from the four-wave mixing in the highly nonlinear fiber, the uniformity and stabilization of the output multi-wavelength lasing have been greatly improved, in comparison with similar laser using single-mode fiber. Moreover, the wavelength spacing can be arbitrarily chosen according to the requirement through changing the PMF length.     

Spacing-tunable multi-wavelength fiber laser based on cascaded four-wave mixing in highly nonlinear photonic-crystal fiber

A multi-wavelength fiber laser based on the cascaded four-wave mixing in highly-nonlinear photonic-crystal fiber is proposed and investigated. The cascade operation is initiated by two strong pump waves boosted by multi-mode pumping erbium/ytterbium co-doped double-cladding fiber amplification technique. A segment of highly-nonlinear near-zero-dispersion-flattened photonic crystal fiber is employed to induce highly efficient cascaded four-wave mixing. The wavelength spacing can be continuously tunable by stretching the fiber Bragg grating. Experimental results show that multiple wavelengths with a high optical side-mode suppression-ratio of >30 dB are achieved. Furthermore, the proposed multi-wavelength fiber laser exhibits an excellent stability at room temperature.     

Room-temperature multiwavelength erbium-doped fiber ring laser employing sinusoidal phase-modulation feedback

An effective method for achieving a room-temperature multiwavelength erbium-doped fiber ring laser is presented. Simultaneous multiwavelength lasing with 0.5-nm intervals is achieved both experimentally and theoretically by addition of sinusoidal phase modulation in the ring cavity to prevent single-wavelength oscillation.     

Wideband multiwavelength erbium-doped fiber ring laser with frequency shifted feedback

Wideband multiwavelength erbium-doped fiber ring lasers with frequency shifted feedback are described. The use of an intra-cavity gain flattening filter (GFF) was proposed in order to increase the lasing spectral bandwidth, leading to a demonstration of 34 lasing wavelengths in 28 nm bandwidth in C-band. The GFF induced spectral output power fluctuation is discussed. Multiwavelength operation was also demonstrated for the first time in L-band, where wideband laser operation was obtained without a GFF. Optical bistability and Kerr effect induced pulsation were determined to be limiting factors to stable operation range in this kind of multiwavelength lasers.     

Switchable single- and dual-wavelength erbium-doped fiber laser assisted by four-wave mixing with wide and continuous tunability

A widely tunable and stable erbium-doped fiber laser based on four-wave mixing effect in a highly nonlinear fiber is proposed and experimentally demonstrated. By adjusting reflected power from a dual-selective element, the ring laser is switchable between single- and dual-wavelength operations. The tuning range of the single laser is 22.78 nm, from 1,542.07 to 1,564.85 nm, while the wavelength spacing of the dual-wavelength can be continuously tuned from 0.52 to 22.78 nm. The laser is stable with output peak power fluctuation of <1 dB in 30-min interval.     

Broadly tunable multiwavelength Brillouin-erbium fiber laser using a twin-core fiber coupler

A tunable multiwavelength Brillouin-erbium fiber laser (MW-BEFL) using a twin-core fiber (TCF) coupler is proposed and demonstrated. The TCF coupler is formed by splicing a section of TCF between two single-mode fibers. By simply applying bending curvature on the TCF coupler, the peak net gain is shifted close to the Brillouin pump (BP), which has advantage for suppressing self-lasing cavity modes with low-BP-power injection. In this work, the dependency of the Stokes signals tuning range on the free spectral range (FSR) of TCF coupler is studied. It is also found that the tuning range of MW-BEFL can exceed the FSR of TCF coupler by adopting proper BP power and 980-nm pump power. Up to 40 nm tuning range of MW-BEFL in the absence of self-lasing cavity modes is achieved.     

环形腔声光可调谐掺铒光纤激光器调谐范围的研究

介绍了一种基于声光可调谐滤波器(AOTF)的可调谐掺铒光纤激光器。从掺铒光纤放大器的速率方程和传输方程出发,推导出声光可调谐掺铒光纤激光器的输出公式,理论上解释了该环形腔声光可调谐掺铒光纤激光器调谐范围仅决定于掺铒光纤的增益带宽;并在实验中测得该激光器调谐范围为1 526.05 nm到1 560.63 nm,这个区间对应着实验所得掺铒光纤自发辐射谱的增益区间,从而验证了理论推导所得结论。     

Wavelength tunable erbium-doped fiber ring laser operating in L-band

We describe a novel erbium-doped fiber ring laser utilizing the backward amplified spontaneous emission (ASE) power as a secondary pump source so that it can operate in L-band stably. The output wavelength can be tuned in a wide range of 45 nm, from 1560 to 1605 nm. We also compared this scheme with the condition of not using the ASE as secondary pump source, and found this scheme could improve the performance of the laser when using the same components.