Some Unusual Products from the Thermal Reaction of Azulenes with Dimethyl Acetylenedicarboxylate

The thermal reaction of azulene-1-carbaldehydes 5 and 6 with excess dimethyl acetylenedicarboxylate (ADM) in decalin leads mainly to the formation of (1 + 1) and (1 + 2) adducts arising from the addition of ADM at the seven-membered ring of the azulenes (cf. Schemes 2 and 4). The (1 + 2) adducts are formed in a homo-Diels-Alder reaction of ADM and isomeric tricyclic carbaldehydes which are derived from the primary tricyclic carbaldehydes by reversible [1s5s]-C shifts (cf. Schemes 3 and 5). The thus formed pentacyclic carbaldehydes seem to undergo deep-seated skeletal rearrangements (cf. Scheme 7) which result finally in the formation of the formyl-tetrahydrocyclopenta[bc]acenaphthylene-tetraesters 12 and 19 , respectively. In other cases, e.g., azulene-1-carbaldehydes 7 and 8 (cf. Scheme 8), the thermal reaction with excess ADM furnishes only the already known tetracycfic (1 + 2) adducts of type anti- 26 to ‘anti’- 29 . The thermal reaction of 1,3,4,8-tetramethylazulene ( 9 ) with excess ADM in decalin resulted in the formation of two (1 + 2) and one (1 + 3) adduct in low yields (cf. Scheme 9). The latter turned out to be the 2,6-bridged barrelene derivative 32 . There are structural evidences that 32 is formed by similar pathways as the formyl-tetrahydrocyclopenta[bc]acenaphthylene-tetraesters (cf. Schemes 7 and 11). [²H₃]Me-Labelling experiments are in agreement with the proposed mechanisms (cf. Scheme 13).     

Thermal Reaction of Azulene-1-carbaldehydes with Dimethyl Acetylenedicarboxylate

Azulene-1-carbaldehydes which have Me substituents at C(3) and C(8) and no substituent at C(6) react with excess dimethyl acetylenedicarboxylate (ADM) in decalin at 200° to yield exclusively the Diels-Alder adduct at the seven-membered ring (cf. Scheme 3). The corresponding 1-carboxylates behave similarly (Scheme 4). Azulene-1-carbaldehydes which possess no Me substituent at C(8) (e.g. 11 , 12 in Scheme 2) gave no defined products when heated with ADM in decalin. On the other hand, Me substitutents at C(2) may also assist the thermal addition of ADM at the seven-membered ring of azulene-1-carbaldehydes (Scheme 6). However, in these cases the primary tricyclic adducts react with a second molecule of ADM to yield corresponding tetracyclic compounds. The new tricyclic aldehydes 16 and 17 which were obtained in up to 50% yield (Scheme 3) could quantitatively be decarbonylated with [RhCl(PPh₃)₃] in toluene at 140° to yield a thermally equilibrated mixture of four tricycles (Scheme 8). It was found that the thermal isomerization of these tricycles occur at temperatures as low as 0° and that at temperatures > 40° the thermal equilibrium between the four tricycles is rapidly established via [1,5]-C shifts. The establishment of the equilibrium makes the existence of two further tricycles necessary (cf. Scheme 8). However, in the temperature range of up to 85° these two further tricycles could not be detected by ¹H-NMR. When heated in the presence of excess ADM in decalin at 180°, the ‘missing’ tricyclic forms could be evidenced by their tetracyclic trapping products ‘anti’- 45 and ‘anti’- 48 , respectively (Scheme 9).     

Thermal Reaction of Highly Alkylated Azulenes with Dimethyl Acetylenedicarboxylate: HOMO(Azulene) vs. SHOMO(Azulene) Control in the Primary Thermal Addition Step

The reaction of highly alkylated azulenes with dimethyl acetylenedicarboxylate (ADM) in decalin or tetralin at 180–200° yields, beside the expected heptalene- and azulene-1,2-dicarboxylates, tetracyclic compounds of type ‘anti’- V and tricyclic compounds of type E (cf. Schemes 2–4 and 8–11). The compounds of type ‘anti’- V represent Diels-Alder adducts of the primary tricyclic intermediates A with ADM. In some cases, the tricyclic compounds of type E also underwent a consecutive Diels-Alder reaction with ADM to yield the tetracyclic compounds of type ‘anti’- or ‘syn’- VI (cf. Schemes 2 and 8–11). The tricyclic compounds of type E , namely 4 and 8 , reversibly rearrange via [1,5]-C shifts to isomeric tricyclic structures (cf. 18 and 19 , respectively, in Scheme 6) already at temperatures > 50°. Photochemically 4 rearranges to a corresponding tetracyclic compound 20 via a di-π-methane reaction. The observed heptalene- and azulene-1,2-dicarboxylates as well as the tetracyclic compounds of type ‘anti’'- V are formed from the primary tricyclic intermediates A via rearrangement (→heptalenedicarboxylates), retro-Diels-Alder reaction (→ azulenedicarboxylates), and Diels-Alder reaction with ADM. The different reaction channels of A are dependent on the substituents. However, the main reaction channel of A is its retro-Diels-Alder reaction to the starting materials (azulene and ADM). The highly reversible Diels-Alder reaction of ADM to the five-membered ring of the azulenes is HOMO(azulene)/LUMO(ADM)-controlled, in contrast to the at 200° irreversible ADM addition to the seven-membered ring of the azulenes to yield the Diels-Alder products of type E . This competing reaction must occur on grounds of orbital-symmetry conservation under SHOMO(azulene)/LUMO(ADM) control (cf. Schemes 20–22). Several X-ray diffraction analyses of the products were performed (cf. Chapt. 4.1).     

Thermal Reaction of Azulenes with Dimethyl Acetylenedicarboxylate in Supercritical Carbon Dioxide

1,3,4,6,8-Pentamethylazulene ( 9 ), when heated at 100° in supercritical CO₂ at 150 bar in the presence of 4 equiv. of dimethyl acetylenedicarboxylate (ADM), led to the formation of 16% of a 1:1 mixture of dimethyl 3,5,6,8,10-pentamethylheptalene-1,2-dicarboxylate 12a ) and its double-bond-shifted isomer 12b as well as 4% of the corresponding azulene-1,2-dicarboxylate 13 (Scheme 4). The formation of the [1 + 2] adduct 11 (cf. Scheme 2) was not observed. Similarly, benz[a]azulene ( 25 ) yielded in supercritical CO₂ (150°/170 bar) in the presence of 4 equiv. of ADM dimethyl benzo[d]heptalene-6,7-dicarboxylate ( 29 ; 30%) and dimethyl benzo[a]cyclopent[cd]azulene-1,2-dicarboxylate ( 28 ; 22%; Scheme 5). The reaction of 5,9-diphenylbenz[a]azulene ( 26 ) and ADM in supercritical CO₂ (100°/150 bar) gave the corresponding benzo[d]heptalene-6,7-dicarboxylate 31 (22%) and dimethyl 5,9-diphenyl-4b,10-etheno-10H-benz[a]azulene-11,12-dicarboxylate( 30 ; 25%; Scheme 5).     

Three-Component Reaction Between Trivalent Phosphorus,Dimethyl Acetylenedicarboxylate,and Amide Derivatives

Stabilized phosphoranes were synthesized from the reaction between dimethyl acetylenedicarboxylate and amide derivatives in the presence of triphenylphosphine. Dimethylurea containing a phosphorus ylide underwent a smooth reaction in boiling toluene to produce hydantoin and oxo-oxazolidin containing stable phosphorus ylides in good yields. Phosphorus ylides derived from (PhO)₃P were not stable and converted to diastereoisomeric phosphonates and phosphorimidate. The nature of the amide derivatives and type of trivalent phosphorus compounds, as well as solvents, determined the distribution of products.     

Thermal Reactions of Guaiazulene and Its 3-Methyl Derivative with Dimethyl Acetylenedicarboxylate

The thermal reaction of 7-isopropyl-1,3,4-trimethylazulene (3-methylguaiazulene; 2 ) with excess dimethyl acetylenedicarboxylate (ADM) in decalin at 200° leads to the formation of the corresponding heptalene- ( 5a/5b and 6a/6b ; cf. Scheme 3) and azulene-1,2-dicarboxylates ( 7 and 8 , respectively). Together with small amounts of a corresponding tetracyclic compound (‘anti’- 13 ) these compounds are obtained via rearrangement (→ 5a/5b and 6a/6b ), retro-Diels-Alder reaction (→ 7 and 8 ), and Diels-Alder reaction with ADM (→ ‘anti’- 13 ) from the two primary tricyclic intermediates ( 14 and 15 ; cf. Scheme 5) which are formed by site-selective addition of ADM to the five-membered ring of 2 . In a competing Diels-Alder reaction, ADM is also added to the seven-membered ring of 2 , leading to the formation of the tricyclic compounds 9 and 10 and of the Diels-Alder adducts ‘anti’- 11 and ‘anti’- 12 , respectively of 9 and of a third tricyclic intermediate 16 which is at 200° in thermal equilibrium with 9 and 10 (cf. Scheme 6). The heptalenedicarboxylates 5a and 5b as well as 6a and 6b are interconverting slowly already at ambient temperature (Scheme 4). The thermal reaction of guaiazulene ( 1 ) with excess ADM in decalin at 190° leads alongside with the known heptalene- ( 3a ) and azulene-1,2-dicarboxylates ( 4 ; cf. Schemes 2 and 7) to the formation of six tetracyclic compounds ‘anti’- 17 to ‘anti’- 21 as well as ‘syn’- 19 and small amounts of a 4:1 mixture of the tricyclic tetracarboxylates 22 and 23 . The structure of the tetracyclic compounds can be traced back by a retro-Diels-Alder reaction to the corresponding structures of tricyclic compounds ( 24--29 ; cf. Scheme 8) which are thermally interconverting by [1,5]-C shifts at 190°. The tricyclic tetracarboxylates 22 and 23 , which are slowly equilibrating already at ambient temperature, are formed by thermal addition of ADM to the seven-membered ring of dimethyl 5-isopropyl-3,8-dimethylazulene-1,2-dicarboxylate ( 7 ; cf. Scheme 10). Azulene 7 which is electronically deactivated by the two MeOCO groups at C(1) and C(2) shows no more thermal reactivity in the presence of ADM at the five-membered ring (cf. Scheme 11). The tricyclic tetracarboxylates 22 and 23 react with excess ADM at 200° in a slow Diels-Alder reaction to form the tetracyclic hexacarboxylates 32 , ‘anti’- 33 , and ‘anti’- 34 (cf. Schemes 10–12 as well as Scheme 13). A structural correlation of the tri- and tetracyclic compounds is only feasible if thermal equilibration via [1,5]-C shifts between all six possible tricyclic tetracarboxylates ( 22, 23 , and 35–38 ; cf. Scheme 13) is assumed. The tetracyclic hexacarboxylates 32 , ‘anti’- 33 , and ‘anti’- 34 seem to arise from the most strained tricyclic intermediates ( 36–38 ) by the Diels-Alder reaction with ADM.     

Reaction of 4-Azidoquinoline N-Oxide with Dimethyl Acetylenedicarboxylate

The reaction of 4-azidoquinoline N-oxide with dimethyl acetylenedicarboxylate occurs via a 1,3-dipolar cycloaddition mechanism at the N-oxide and not at the azide group.     

Thermal and Ru-catalyzed Reactions of Styryl-Substituted Azulenes with Dimethyl Acetylenedicarboxylate

The thermal reaction of 1-[(E)-styrl]azulenes with dimethyl acetylenedicarboxylate (ADM) in decalin at 190–200° does not lead to the formation fo the corresponding heptalene-1,2-dicarboxylates (Scheme 2). Main products are the corresponding azulene-1,2-dicarboxylates (see 4 and 9 ), accompanied by the benzanellated azulenes trans- 10a and trans- 11 , respectively. The latter compounds are formed by a Diels-Alder reaction of the starting azulenes and ADM, followed by an ene reaction with ADM (cf. Scheme 3). The [RuH₂(PPh₃)₄]-catalyzed reaction of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes (R=H, MeO, Cl; Scheme 4) with ADM in MeCN at 110° yields again the azulene-1,2-dicarboxylates as main products. However, in this case, the corresponding heptalene-1,2-dicarboxylates are also formed in small amounts (3–5%; Scheme 4). The benzanellated azulenes trans- 10a and trans- 10b are also found in small amounts (2–3%) in the reaction mixture. ADM Addition products at C(3) of the azulene ring as well as at C(2) of the styryl moiety are also observed in minor amounts (1–3%). Similar results are obtained in the [RuH₂(PPh₃)₄]-catalyzed reaction of 3-[(E)-styryl]guaiazulene ((E)- 8 ; Scheme 5) with ADM in MeCN. However, in this case, no heptalene formation is observed, and the amount of the ADM-addition products at C(2) of the styryl group is remarkably increased (29%). That the substitutent pattern at the seven-membered ring of (E)- 8 is not responsible for the failure of heptalene formation is demonstrated by the Ru-catalyzed reaction of 7-isopropyl-4-methyl-1-[(E)-styryl]azulene ((E)- 23 ; Scheme 11) with ADM in MeCN, yielding the corresponding heptalene-1,2-dicarboxylate (E)- 26 (10%). Again, the main product is the corresponding azulene-1,2-dicarboxylate 25 (20%). Reaction of 4,6,8-trimethyl-2-[(E)-styryl]azulene ((E)- 27 ; Scheme 12) and ADM yields the heptalene-dicarboxylates (E)- 30A / B , purely thermally in decalin (28%) as well as Ru-catalyzed in MeCN (40%). Whereas only small amounts of the azulene-1,2-dicarboxylate 8 (1 and 5%, respectively) are formed, the corresponding benzanellated azulene trans- 29 ist found to be the second main product (21 and 10%, respectively) under both reaction conditions. The thermal reaction yields also the benzanellated azulene 28 which is not found in the catalyzed variant of the reaction. Heptalene-1,2-dicarboxylates are also formed from 4-[(E)-styryl]azulenes (e.g. (E)- 33 and (E)- 34 ; Scheme 14) and ADM at 180–190° in decalin and at 110° in MeCN by [RuH₂(PPh₃)₄] catalysis. The yields (30%) are much better in the catalyzed reaction. The formation of by-products (e.g. 39–41 ; Scheme 14) in small amounts (0.5–5%) in the Ru-catalyzed reactions allows to understand better the reactivity of zwitterions (e.g. 42 ) and their triyclic follow-up products (e.g. 43 ) built from azulenes and ADM (cf. Scheme 15).     

多取代芳香族化合物的合成 4.取代的环丁-3-烯砜与丁炔二酸二甲酯的Diels-Alder反应

３－苯硒基－或３－苯硫基取代的环丁－３－烯砜甚易与丁炔二酸二甲酯发生Ｄｉｅｌｓ－Ａｌｄｅｒ反应，生成相应的苯硒基或苯硫基取代的１，４－环己二烯－１，２－二羧酸二甲酯，此类产物用二氯二氰苯醌（ＤＤＱ）处理，即生成相应的多取代芳香族化合物４－苯硒基邻苯二甲酸二甲酯或４－苯硫基邻苯二甲酸二甲酯。     

Synthesis of an Isotopically Isomeric Mixture of 1,4,6,8-Tetramethyl[13C2]azulene and Its Thermal Reaction with Dimethyl Acetylenedicarboxylate

Sodium [1,3-¹³C₂]cyclopentadienide in tetrahydrofuran (THF) has been prepared from the corresponding labelled [¹³C₂]cyclopentadiene which was synthesized from ¹³CO₂ and (chloromethyl)trimethylsilane (cf. Scheme 10) according to an established procedure. It could be shown that the acetate pyrolysis of cis-cyclopentane-1,2-diyl diacetate (cis- 22 ) at 550 ± 5° under reduced pressure (60 Torr) gives five times as much cyclopentadiene as trans- 22 . The reaction of sodium [1,3-¹³C₂]cyclopentadienide with 2,4,6-trimethylpyrylium tetrafluoroborate in THF leads to the formation of the statistically expected 2:2:1 mixture of 4,6,8-trimethyl[1,3a-¹³C₂], -[2,3a-¹³C₂]-, and -[1,3-¹³C₂]azulene ( 20 ; cf. Scheme 7 and Fig. 1). Formylation and reduction of the 2:2:1 mixture [¹³C₂]- 20 results in the formation of a 1:1:1:1:1 mixture of 1,4,6,8-tetramethyl[1,3-¹³C₂]-, -[1,3a-¹³C₂]-, -[2,3a-¹³C₂]-, -[2,8a-¹³C₂]-, and -[3,8a-¹³C₂]azulene ( 5 ; cf. Scheme 8 and Fig. 2). The measured ²J(¹³C, ¹³C) values of [¹³C₂]- 20 and [¹³C₂]- 5 are listed in Tables 1 and 2. Thermal reaction of the 1:1:1:1:1 mixture [¹³C₂]- 5 with the four-fold amount of dimethyl acetylenedicarboxylate (ADM) at 200° in tetralin (cf. Scheme 2) gave 5,6,8,10-tetramethyl-[¹³C₂]heptalene-1,2-dicarboxylate ([¹³C₂]- 6a ; 22%), its double-bond-shifted (DBS) isomer [¹³C₂]- 6b (19%), and the corresponding azulene-1,2-dicarboxylate 7 (18%). The isotopically isomeric mixture of [¹³C₂]- 6a showed no ¹J(¹³C,¹³C) at C(5) (cf. Fig. 3). This finding is in agreement with the fact that the expected primary tricyclic intermediate [7,11-¹³C₂]- 8 exhibits at 200° in tetralin only cleavage of the C(1)? C(10) bond and formation of a C(7)? C(10) bond (cf. Schemes 6 and 9), but no cleavage of the C(1)? C(11) bond and formation of a C(7)? C(11) bond. The limits of detection of the applied method is ≥96% for the observed process, i.e., [1,3a-¹³C₂]- 5 + ADM→ [7,11-¹³C₂]- 8 →[1,6-¹³C₂]- 9 →[5,10a-¹³C₂]- 6a (cf. Scheme 6).     

Reaction of Dimethyl Acetylenedicarboxylate With 2-Mercaptoperimidine and 2-Mercaptobenzimidazole

A mixture of equimolar quantities of dimethyl acetylenedicarboxylate ( 2 ) with either 2-mercaptoperimidine ( 1 ) or 2-mercaptobenzimidazole ( 5 ) was heated in absolute benzene in the presence of triphenylphosphine as a catalyst under reflux conditions for 1 h (the reaction was monitored by TLC until the consumption of the starting materials). The solvent was concentrated under vacuum and the residue was subjected to chromatographic plates using toluene-ethylacetate (2:1) as an eluent. The products in each reaction were separated as two migrating zones. Each zone was removed from the plate and recrystallized from the appropriate solvent. The products of the first reaction are 10-methoxy-11-oxo-11H-8-thia-7,11a-diaza-benzo[de]anthracene-9-carboxylic acid methyl ester ( 3 ) and 8-thia-7,10a-diaza-cyclopenta[a]phenalene-9,10-dicarboxylic acid dimethyl ester ( 4 ), while the products of the second reaction are 3-methoxy-4-oxo-4H-1-thia-4a,9-diaza-fluorene-2-carboxylic acid methyl ester ( 10 ) and benzo[4, 5]imidazo[2,1-b]thiazole-2,3-dicarboxylic acid dimethyl ester ( 11 ). The mechanisms of the observed reactions are suggested.     

多取代芳香族化合物的合成 5.卤素-苯硒基取代的丁二烯和丁炔二酸二甲酯的环加成-芳构化串连反应

本文报道用环加成－芳构化串连反应制备多取代芳香族化合物的方法。将１－氯－２－卤－３－苯硒基－１，３－丁二烯（５）与丁炔二酸二甲酯进行Ｄｉｅｌｓ－Ａｌｄｅｒ反应时，能直接生成多取代的芳香族化合物４－苯硒基－５－卤代邻苯二甲酸二甲酯（４）。若用２－卤素－３－苯硒基－１，３－丁二烯（１）与丁炔二酸二甲酯进行Ｄｉｅｌｓ－Ａｌｄｅｒ反应，只得到正常的加成产物４－苯硒基－５－卤素－１，４－环己二烯－１，２－二甲酸二甲酯（３），需再用ＤＤＱ处理，才得到多取代芳香族化合物（４）。     

Theoretical Studies of Azulene and Its Derivatives

The results of ab initio calculation with STO-3G and 6-31G basis set on the azulene and its derivatives (included azulenequinones, diazoazulenequinones and polyether bridged azulenes) are presented in accordance with considerations of structures and bonding. Azulene is a nonalternant aromatic compound with ten π electrons and it has either C_s or symmetry dgpend on the different carbon and carbon bonding. The calculation results indicate that C_s symmetry is the ground state structure of azulene. TTie simple MO and CIS calculations describe the excited state of azulene.     

Formation of Unusual Products from the Acid-Catalyzed Reaction of Azulenes with Dimethyl Acetylenedicarboxylate

The reaction of guaiazulene ( 4 ) and dimethyl acetylenedicarboxylate (ADM) in tetralin or toluene, catalyzed by 5 mol-% of trifluoroacetic acid (TFA) at ambient temperature, leads to the formation of the corresponding heptalene-4,5-dicarboxylate 6 and a guaiazulenyl-substituted 2,2a,4a,8b-tetrahydrocyclopent[cd]azulene derivative 7 beside the expected guaiazulenyl-substituted ethenedicarboxylates (E)- 5 and (Z)- 5 as main products (Scheme 2). The structure of 7 was unequivocally established by an X-ray crystal-structure analysis (Fig. 1). Precursor of 7 must be the 2a,4a-dihydrocyclopent[cd]azulene-3,4-dicarboxylate 9 which reacts, under TFA catalysis, with a second molecule of 4 (Scheme 3). No formation of products of type 7 has been observed in the TFA-catalyzed reaction of 4,6,8-trimethyl- and 1,4,6,8-tetramethylazulene ( 13 and 16 , respectively) and ADM (Scheme 4). On the other hand, the TFA-catalyzed reaction of azulene ( 18 ) itself and ADM at ambient temperature gives rise to a whole variety of new products (Scheme 5), the major part of which is derived from dimethyl 2a,4a-dihydrocyclopent[cd]azulene-3,4-dicarboxylate ( 25 ) as the main intermediate (Scheme 6). Nevertheless, for the formation of the 2a,4a,6,8b-tetrahydrocyclobut[a]azulene derivatives (E)- 24a and (E)- 24b , a corresponding 2a,8b-dihydro precursor 29 has to be postulated as crucial intermediate (Scheme 8).     

An Unexpected Reaction Between 6,7-Dimethoxy-2H-1,3-benzothiazine and Dimethyl Acetylenedicarboxylate

Summary. 6,7-Dimethoxy-2H-1,3-benzothiazine reacted with dimethyl acetylenedicarboxylate in aqueous methanol to give heterocycles with unexpected structures. A mechanism is proposed for the reaction.     

2，2＇－偶氮二异丁酸二甲酯的合成及其热分解反应的研究

本文研究了２，２＇－偶氮二异丁酸二甲酯的合成及其在甲苯、二甲苯中的热分解反应动力学，得到了其热分解反应速度常数与反应温度的关系式：Ｋ＿ｄ＝１．６３×１００￣（－１４）ｅｘｐ（－１２３．３ＫＪ／ＲＴ）２，２＇－偶氮二异丁酸二甲酯作为苯乙烯自由基聚合的引发剂，其单体转化率随引发剂用量的增加而增高，产物分子量则随之下降；引发剂用量在５％以上时，可得到分子量低于１０￣３的含有酯基端基的聚合物。     

Novel Reaction of Some Azoles with Dimethyl Sulfoxid

The compounds 4a～4j were prepared by 3a～3j which were prepared from 1a～1j through 2a～2j. The compounds 6a～6j were prepared by the reaction of the products of 4a～4j with dimethyl sulfoxid via Dimroth rearrangement.[1] The compounds ethyl 5-arylamino-1H-1,2,3-triazol-4-carbonates (5a～5d) and ethyl 2-methylthiamethylene-5-arylamino-2H-1,2,3-triazol-4-carbonates (6a～6j) are established by MS, IR, elemental analysis and 1H NMR spectral data. The route of syntheses is shown in Scheme 1.