Synthesis of new guanidine derivatives from 2′,3′,4′,9′-tetrahydrospiro[piperidine-4,1′-[1H]pyrido[3,4-b]indole]

The reaction of the isothiourea derivative 2 with methylaminc or pyrrolidine resulted in guanidines 3a-3b . Using hydrazine under the same conditions the tetrazole derivative 4 was obtained. On reacting 2 with piperidine, morpholine, methylhydrazine, phenylhydrazine, hydroxylamine or sodium hydroxide, cycliza-tion took place leading to the novel 4-cyanimino-1,2,3,4,6,7,12,12b-octahydro-3,12b-ethanopyrim-ido[1′,6′:1,2]pyrido[3,4-b]indole ( 5 ). Some structural aspects of 5 and other model compounds were analysed mainly by ¹³C nmr spectroscopy.     

Synthesis of 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-thiopyrans] and 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro-[isobenzofuran-1,4′-pyrans]

The 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-thiopyran] ring system ( 2a ) has been prepared from o-bromobenzoic acid. The 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-pyran] ring system ( 3a ) has been prepared from 2-bromobenzhydrol methyl ether. Several 3-(dimethylaminoalkyl) derivatives of both 2a and 3a were prepared by lithiation followed by alkylation.     

Tricyclic heterocyclic systems: Pyrazolo[5′,4′:4,5]-and pyrazolo-[3′,4′:4,5]pyrano[2,3-b]pyridine derivatives

By reacting 2-chloronicotinoyl chloride with acetyl or benzoyl acetate, ethyl 2-methyl- or 2-phenyl-4-oxopyrano[2,3-b]pyridine-3-carboxylates were prepared. The nucleophilic rearrangement of the latter with hydrazines gave rise to the title compounds.     

Benzo[a]azulenediones and 10,10′‐Bibenzo[a]azulene

The oxidation of benzo[a]azulene ( 4 ) with commercial MnO₂ in dioxane/H₂O leads to a number of products in low yield (Table 1). Treatment of 4 with ‘mild’ MnO₂ (MnO₂/C) in dioxane/5% H₂O results in the formation of 10,10′‐bibenzo[a]azulene ( 18 ) in yields of up to 59% of isolated and purified material. Compound 18 exhibits atropisomerism and can be separated by HPLC on a Chiralcel column at room temperature into its stable antipodes (Fig.).     

Synthesis of new heteroaromatic nitrogen ligands: Pyrimido‐[4″,5″:4′,5′]‐thieno[3′,2′:4,5]thieno[3,2‐d]pyrimidines and 1,2,3‐triazine[4″,5″:4′,5′]thieno[3′,2′:4,5]thieno[3,2‐d]‐1,2,3‐triazines

An efficient one‐pot access for the synthesis of the previously unreported tetracyclic fused pyrimido‐[4″,5″:4′,5′]thieno[3′,2′:4,5]thieno[3,2‐d]pyrimidine ( 3 ) and 1,2,3‐triazine[4″,5″:4′,5′]thieno‐[3′,2′:4,5]thieno‐[3,2‐d]‐1,2,3‐triazine ( 5 ) heteroaromatic nitrogen ligands is described. The title compounds 3 and 5 were obtained from 3,4‐diaminothieno[2,3‐b]thiophene‐2,5‐dicarbonitrile and phosgeniminium chloride and sodium nitrite/HCl, respectively. Substituted condensed thieno[2,3‐b]thiophene derivatives 4 and 6 were synthesized by nucleophilic displacement of the chloroderivatives 3 and 5 .     

Synthesis of nitrogen‐containing heterocycles 9. Preparation and carbon‐carbon bond cleavage of spiro[cycloalkane[1′,2′,4′]‐triazolo[1′,5′‐a][1′,3′,5′]triazine] derivatives and related compounds

Diaminomethylenehydrazones of cyclic ketones 1–5 reacted with ethyl N‐cyanoimidate (I) at room temperature or with bis(methylthio)methylenecyanamide (II) under brief heating to give directly the corresponding spiro[cycloalkane[1′,2′,4′]triazolo[1′,5′,‐a][1′,3′‐5′]triazine] derivatives 7–12 in moderate to high yields. Ring‐opening reaction of the spiro[cycloalkanetriazolotriazine] derivatives occurred at the cycloalkane moiety upon heating in solution to give 2‐alkyl‐5‐amino[1,2,4]triazolotriazines 13–16. Diaminomethylenehydrazones 17–19, of hindered acyclic ketones, gave 2‐methyl‐7‐methylthio[1,2,4]‐triazolo[1,5‐a][1,3,5]triazines 21–23 by the reaction with II as the main products with apparent loss of 2‐methylpropane from the potential precursor, 2‐tert‐butyl‐2‐methyl‐7‐methylthio[1,2,4]triazolo[1,5‐a]‐[1,3,5]triazines 20, in good yields. In general, bis(methylthio)methylenecyanamide II was found to be a favorable reagent to the one‐step synthesis of the spiro[cycloalkanetriazolotriazine] derivatives from the diaminomethylenehydrazones. The spectral data and structural assignments of the fused triazine products are discussed.     

Synthesis and reduction of thieno[2′,3′(3′,2′ or 3′,4′):5,6]-azocino[2,1-a]isoindole-7, 13-diones

A synthesis of the thieno[2′,3′(3′,2′ or 3′,4′):5,6]azocino[2,1-a]isoindole-7,13-diones 6a-c was developed from N-thienylethylphthalimides 3a-c using a Wittig reaction followed by a Friedel-Crafts cyclization of acetic acid derivatives 5a-c . Reduction of ketones 6a-c into alcohols 7a-c was stereo specific.     

Synthesis,structure and some reactions of 4a',5′,6′,7′,8′,8a'‐hexahydro‐4′H‐spiro[cyclohexane‐1,9′‐[1,2,4]triazolo[5,1‐b]‐quinazolines]

2′‐Substituted 5′,6′,7′,8′‐tetrahydro‐4′H‐spiro[cyclohexane‐1,9′‐[1,2,4]triazolo[5,1‐b]quinazolines] 3a‐d were synthesized by condensation of 3‐substituted 5‐amino‐1,2,4‐triazoles 1a‐d with 2‐cyclohexylidene cyclohexanone 2 in DMF. The compounds 3 were hydrogenated with sodium borohydride in ethanol to give 2′‐substituted cis‐4a',5′,6′,7′,8′,8a'‐hexahydro‐4′H‐spiro[cyclohexane‐1,9′‐[1,2,4]triazolo[5,1‐b]quinazolines] 4a‐d in high yields. The reactions of alkylation, acylation and sulfonylation of the compounds 4 were studied. The structure of the synthesized compounds was determined on the basis of NMR measurements including HSQC, HMBC, NOESY techniques and confirmed by the X‐ray analysis of 6 and 11b . The described synthetic protocols provide rapid access to novel and diversely substituted hydrogenated [1,2,4]triazolo[5,1‐b]quinazolines.     

Dispiro[adamantane‐2,2′‐1′,3′,6′,9′,11′,14′‐hexathiacyclohexadecane‐10′,2′′‐adamantane]

The conformational features of the title compound, C₂₈H₄₄S₆, are compared with previously reported analogous macrocycles. The type of substituent affects considerably the conformation of the macrocycle. A ¹H NMR titration of the title compound with AgBF₄ indicated the formation of the 1:1 complex, which was not crystallized.     

Synthesis of nitrogen-containing heterocycles. 8. Preparation and ring-opening of spiro[cycloalkane-[1′,2′,4′]triazolo[1′,5′-c]pyrimidine] derivatives

Diaminomethylene- and aminomethylthiomethylenehydrazones [2] of cyclic ketones 1–8 readily reacted with ethoxymethylenemalononitrile to give spiro[cycloalkane-1,2′-[1,2′,4′]triazolo[1,5′-c]pyrimidine-8′-carbonitrile] derivatives 12–19 through the electrocyclic reaction of the initially formed condensation products 26 in moderate to high yields. The spiro[cyclopentanetriazolopyrimidine] derivatives underwent ring-opening at the cycloalkane moiety upon heating in solution to give 2-alkyl-5-substituted-[1,2,4]triazolo[1,5-c]pyrimidine-8′-carbonitriles 20–23 . When an alkyl substituent was introduced into the cyclopentane ring, cleavage of the spiro compounds occurred preferentially at the cyclopentane moiety between the spiro carbon and the more branched one. In contrast, the cyclohexane ring, especially of spiro-5-amino-triazolopyrimidines 17 and 18 strongly resisted to ring-opening under similar conditions, but those of 5-methylthiotriazolopyrimidines 14 gave up to 17 percent of cleavage after prolonged heating in hot ethanol. 2-t-Butyl-5-methylthio-2,3-dihydro[1,2,4]triazolo[1,5-c]pyrimidine-8-carbonitrile 25 [R³ = C(CH₃)₃] was highly susceptible to the cleavage even at room temperature and produced the corresponding 2-unsubstituted triazolopyrimidine 24 with loss of the t-butyl group.     

Synthesis of 1′-substituted and 1′,3′-disubstituted (±)-2R*, 11bS*-9,10-Dimethoxy-1,3,4,6,7,11 b-Hexahydrospiro-[benzo[a]quinolizin-2,5′-imidazolidine]-2′,4′-diones

The results of the reaction between (±)-2R*,11bS*-2-alkyl(aryl)amino-1,3,4,6,7,11b-hexahydrobenzo[a]-quinolizine-2-carbonitriles 2 and isocyanates under a variety of experimental conditions are discussed. The ureides 3 and iminohydantoins 4 thus obtained were used to prepare N₃-monosubstituted and N₁,N₃-disubstituted derivatives of the (±)-2R*,11bS*-9,10-dimethoxy-1,3,4,6,7,11b-hexahydrospiro[benzo[a]quinolizin-2,5′-imidazolidine]-2′,4′-dione system 1 . The stereochemistry of these compounds is discussed, on the basis of spectroscopic evidence and study of their chemical reactivity.     

Nitration of dithieno[3,2-b:3′,2′-d]pyridine and dithieno[3,2-b:3′,4′-d]pyridine

Nitration of dithieno[3,2-b:3′,2′-d]pyridine ( 4 ) and dithieno[3,2-b:3′,4′-d]pyridine ( 5 ) has been studied. Nitration of 4 occurred in both positions of the C ring, while 5 was predominantly substituted on the 3,4-fused ring. The structures of the nitro derivatives were proven by extensive use of ¹H and ¹³C nmr spectroscopy.     

Direct bromination of dithieno[3,4-b:3′,4′-d]pyridine and dithieno[2,3-b:3′,2′-d]pyridine

Bromination of dithieno[3,4-b:3′,4′-d]pyridine ( 1 ) and dithieno[2,3-b:3′,2′-d]pyridine ( 2 ) has been studied. Disubstitution occurred at both positions of the C ring. The substitution pattern is found to be similar to that of the nitration reaction. The structures of bromo derivatives were established by ¹H and ¹³C nmr spectroscopy.     

Synthesis of novel pyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidines,pyrido[3″,2″:4′,5′]thieno[3′,2′:4,5]pyrimido[l,6‐a]benzimidazoles and related fused systems

3‐Amino‐4‐aryl‐5‐ethoxycarbonyl‐6‐methylthieno[2,3‐b]pyridine‐2‐carboxamides 3a‐c were prepared from ethyl 4‐aryl‐3‐cyano‐6‐methyl‐2‐thioxo‐1,2‐dihydropyridine‐5‐carbonylates 1a‐c and reacted with some carbonyl compounds to give tetrahydropyridothienopyrimidine derivatives 6a‐c, 7a‐c and 8a‐c , respectively. Treatment of compound 3c with chloroacetyl chloride led to the formation of a next key compound, ethyl 2‐chloromethyl‐4‐oxo‐3,4‐dihydropyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidine‐8‐carboxylate 9 . Also, 3‐amino‐2‐benzimidazolylthieno[2,3‐b]pyridine‐5‐carboxylate 5 and 2‐(3′‐aminothieno [2,3‐b]pyridin‐2′‐yl)‐4‐oxo‐3,4‐dihydropyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidine‐8‐carboxylate 17 were prepared from 1c. The compounds 5, 9 and 17 were used as good synthons for other pyridothienopyrimidines and pyridothienopyrimidobenzimidazoles as well as for related fused polyheterocyclic systems.     

Ring closure reactions of pyrido[2,3‐d]pyrimidines to pyrano[2′,3′:4,5]‐ and oxazolo[5′,4′:4,5]pyrido[2,3‐d]pyrimidines

The cyclocondensation of 5‐hydroxy‐pyrido[2,3‐d]pyrimidines 1 with malonates gives pyrano[2′,3′:4,5]‐pyrido[2,3‐d]pyrimidines 2 . Nitration of 1 and reduction with zinc in the presence of carboxylic acids/anhydrides gave 2‐alkyloxazolo[5′,4′:4,5]pyrido[2,3‐d]pyrimidines 4 , which were ring‐opened to 6‐aminopyrido[2,3‐d]pyrimidines 5, 6 and 7 . Cyclization of 6‐aminopyrido[2,3‐d]pyrimidines 6 with benzoylchlorides 8 gave 2‐aryloxazolo[5′,4′:4,5]pyrido[2,3‐d]pyrimidines 9 . Reaction conditions for the cyclization have been studied by differential scanning calorimetry (DSC).     

The stereochemistry of 1,6,7,12b-Tetrahydro-2H,4H-[1,2] oxazino[3′,4′:1,2]-pyrido[3,4-b]indole and of 1,2,3,6,7,12b-Hexahydro-3-methyl-4H-pyrimido[3′,4′:1,2]pyrido[3,4-6] indole

From an analysis of nmr spectral data, 1,6,7,12b-tetrahydro-2H,4H-[1,3 ]oxazino[3′, 4′ :1,2]-pyrido[ 3,4-b ]indole is shown to exist in solution at room temperature almost entirely in the cis-fused ring conformation with the nitrogen lone pair bisecting the C4 methylene group whereas under the same conditions 1,2,3,6,7,12b-hexahydro-3-methyl-4H-pyrimido[3′,4′:1,2] pyrido-[3,4-b ]indole exists as an approximately 50:50 equilibrium mixture of the cis and trans-fused ring conformations.     

Synthesis of thieno[2′,3′(3′,4′ or 3′,2′):5,6]azepino[2,1-a]isoindolediones from N-Thienyl-2(3)-ylmethylphthalimides

Reduction of N-thienybnethylphthalimides 5a-e followed by the Wittig reaction gave the substituted acetic acids 8a-e . Their corresponding acyl chlorides where cyclized in the presence of aluminium trichloride to furnish the cyclic ketones 9a-e . Treatment of these ketones with bromine followed by triethylamine, or with selenium dioxide led to the thienoazepinoisoindolediones 1a-e .