大分子分散改性剂PEG400-PMAH-PAA的合成及应用

马来酸酐(MAH)和聚乙二醇400(PEG400)通过开环反应制得预聚体(PEG400-PMAH);再与丙烯酸(AA)进行自由基共聚合成了新型嵌段共聚物聚乙二醇马来酸单酯一聚丙烯酸[PEG400-PMAH-PAA(1)],其结构经NMR,IR,TGA和GPC表征.结果表明1符合设计预期,Mn=3050.Mw=3979,d=1.302,分解温度大于200℃.1作为水溶性大分子分散改性剂,可以提高绢云母在湿磨加工中的水分散性以及与极性橡胶的相容性.     

PBSA-g-MG增容改性热塑性淀粉/PBSA复合材料

以过氧化二异丙苯(DCP)为引发剂,通过熔融接枝将马来酸酐(MA)和甲基丙烯酸缩水甘油酯(GMA)接枝到PBSA(聚丁二酸/聚己二酸-co-丁二醇酯)分子链上,制备了PBSA-g-MG增容剂。采用红外光谱和核磁共振氢谱对增容剂的化学结构进行表征,并探究了PBSA-g-MG的添加量对热塑性淀粉(TPS)与PBSA复合材料(TPS/PBSA)的力学性能、微观形貌、动态热机械性能和吸水性能的影响。结果表明,该增容剂可改善纤维增强的TPS/PBSA复合材料的界面相容性,TPS相与PBSA相的T_g相互靠近,TPS/PBSA的力学性能和耐水性提高。添加质量分数8%增容剂的TPS/PBSA复合材料在59%湿度下的力学强度可达19.4 MPa,比未增容的复合材料提高了将近130%。     

聚对苯二甲酸乙二醇酯/聚乙二醇醚插层嵌段共聚物的结晶性能

合成了不同用量、不同分子量的聚乙二醇醚(PEG)或聚丁二醇醚(PTMC)与聚对苯二甲酸乙二醇酯(PET)/蒙脱土(MMT)的嵌段共聚物。研究了MMT在共聚物中的分散状态及PEG或PTMG对PET/MMT插层聚合物结晶性能的影响。结果表明,MMT在共聚物中以纳米尺寸分散;加入PEG或PTMG增强了聚酯链段的柔顺性,使共聚物熔体降温过程的结晶温度提高,冷结晶温度降低,即插层嵌段共聚物的结晶速率提高;在合成的共聚物中,分子量为2000,用量为DMT的6%的PEG对插层共聚物结晶速率的促进作用最大     

PEG链段对聚乙二醇接枝聚苯胺结构与性能的影响

将苯胺(An)与甲氧基聚乙二醇邻氨基苯基醚氧化共聚,制备了梳状接枝共聚物PAn-g-PEG.研究了梳状接枝共聚物的UV-Vis、微观结构、热稳定性和溶解成膜性等随侧链聚乙二醇(PEG)链段的变化规律.结果表明随PAn-g-PEG中PEG链段长度和含量的提高,共聚物的溶解性和成膜性能显著提高,电子导电率缓慢降低,热稳定性变差.共聚物具有微相分离结构,其形态随PEG链段的改变分别为“海-岛相”和“双连续相”;提高PEG链段长度和含量,PAn-g-PEG能形成稳定的水溶性分散体系,并能浇注成柔韧平整的导电高分子自支撑膜.     

醚化PBS与CMC液体复合材料的相互作用

采用聚乙二醇(PEG)对聚丁二酸丁二醇酯(PBS)进行醚化改性,得到醚化PBS(PEG/PBS),PEG/PBS与羧甲基纤维素(CMC)共混制备了在水相均匀分散的新型(PEG/PBS)-CMC液体复合材料.结合分子模拟技术对PEG/PBS与CMC复合材料的相互作用机理进行了研究.结果表明,PEG/PBS具有预期的化学结构和优异的水润湿性;含醚链段PEG的引入有效提高了PBS分子链的极性和柔顺性,PEG/PBS与CMC之间存在氢键作用、范德华力作用、疏水作用和吸附作用.红外光谱(FTIR)中官能团(如—OH,—OCO—,—COOH,—C—O—C—等)的吸收峰频率发生偏移;光电子能谱(XPS)中C和O元素的结合能分布转移,表明PBS及PEG/PBS与CMC的官能团之间发生了相互作用;偏光显微镜(POM)和X射线衍射(XRD)结果表明,复合材料之间的相互作用为非共价键的结合;扫描电子显微镜(SEM)结果表明醚化改性后(PEG/PBS)-CMC复合材料间的相互作用增强,表面结合更紧密,相容性得到提高.     

侧链PEG基聚合物的制备及其催化酯化反应性能

聚乙二醇单(乙烯基苄基)醚(PEG-VBE)和聚乙二醇二(乙烯基苄基)醚(PEG-DVBE)是重要的可聚合聚乙二醇衍生物,可用于催化剂载体及功能高分子的合成。本文以氢氧化钾为碱,乙烯基苄基氯(VBC)与乙二醇、一缩二乙二醇、二缩三乙二醇、PEG400、PEG600和PEG1500反应,高效合成了一系列乙烯基苄基聚乙二醇衍生物,乙烯基苄基氯的转化率可达96%以上,PEG-VBE的分离收率为32 ~ 93%。乙烯基衍生物在过硫酸钾引发下聚合得到水溶性高分子,产物经1H NMR、ESI-HRMS及FT-IR分析表征。以制备的水溶性PEG基聚合物为微反应器,研究了苯甲酸与甲醇的酯化反应,PEG基聚合物与硫酸的体系对酯化反应具有很好地催化活性。在优化的条件下,苯甲酸的转化率可达99%以上,催化体系循环5次后,催化活性几乎没有下降     

含氟/PEG的有机硅基双亲防污涂层的制备及性能

以不同分子量的端氢硅油(PDMS)和聚乙二醇二烯丙基醚(PEGDE)为原料,通过硅氢加成合成了系列双键封端的含有机硅和聚乙二醇(PEG)链段的多嵌段共聚物(PDMS-b-PEG)m,再用三甲氧基氢硅烷进行端基官能化,生成三甲氧基硅烷封端的多嵌段聚合物,即含PEG前驱物.含PEG前驱物、含氟前驱物(FMS-9922)与有机硅基体树脂通过缩合聚合制备了含PEG的氟硅双亲弹性防污涂层.通过核磁共振氢谱、红外光谱对PEG前驱物的结构进行了表征.吸水率、SEM-EDS和接触角测试考察了含PEG前驱物中疏水链段的长度,含氟前驱物的含量对涂层表面重排的影响,结果表明PEG前驱物中疏水链段越长,涂层的吸水率越低,在水中越稳定,且表面不易发生重排.而含氟前驱物的加入能促使PEG链段向表面方向迁移.抗蛋白、抗菌和抗藻附着性能测试表明:含有FMS-9922的样品防污性能均优于不含FMS-9922的样品,而且随着FMS-9922用量增加,涂层防污性能呈上升趋势;但是FMS-9922用量太高时,体系相容性下降,防污性能也随之变差,故FMS-9922的含量控制在7%为宜.     

高强度丝蛋白/聚乙二醇冻凝胶的制备和表征

以聚乙二醇为交联剂,通过简单的冷冻融化过程制备了一种具有多孔结构的丝蛋白(SF)/聚乙二醇(PEG)高强度冻凝胶材料。利用红外光谱、扫描电镜和万能材料试验机等研究了该冻凝胶的构象转变、微观形貌、力学性能和溶胀行为。结果表明,PEG的加入可以促进SF分子链向更加稳定的结晶构象转变,并且冻凝胶的微观形貌和力学性能通过调节冷冻温度(T_(Freeze))、PEG用量(m_(PEG)/m_(SF))和SF质量分数等进行调节。在T_(Freeze)=-20℃、w_(SF)=0.16、m_(PEG)/m_(SF)=0.50的条件下,该冻凝胶可以压缩至90%以上,并能承受3.5 MPa应力而不发生永久性形变和破裂,其压缩模量可高达0.44 MPa。循环压缩实验表明该冻凝胶具有出色的回复能力,拉伸测试表明其杨氏模量和韧性可分别达到4.15 MPa和680.81 kJ/m~3。此外,该冻凝胶的孔状结构分布均匀、互相连通且溶胀性能优异。     

含介晶单元的反应性增韧剂改性环氧树脂研究──Ⅰ.柔性链分子量对动态力学与冲击性能的影响

本文合成了既含聚醚柔性链、又含刚性介晶结构单元的活性增韧剂（LCEU(PEG)），用其改性E－51／dicy固化体系。系统研究了增韧剂中柔性链分子量与改性体系动态力学性能、冲击性能之间的关系。动态力学分析表明：改性体系的100℃以下的模量没有降低，并且随LCEU(PEG)中柔性链分子量的降低而略有升高；Tg随LCEU(PEG)的加入而略微降低，随改性剂中柔性链分子量的降低而略微增大。冲击实验结果表明：当LCEU(PEG)柔性链分子链为1000、600时，改性体系的冲击强度可以提高6~7倍；而当LCEU(PEG)柔性链分子链为400、200时冲击强度最大只能提高4倍。     

侧链PEG基聚合物的制备及其催化酯化反应性能

聚乙二醇单(乙烯基苄基)醚(PEG-VBE)和聚乙二醇二(乙烯基苄基)醚(PEG-DVBE)是重要的可聚合聚乙二醇衍生物,可用于催化剂载体及功能高分子的合成。本文以氢氧化钾为碱,乙烯基苄基氯(VBC)与乙二醇、一缩二乙二醇、二缩三乙二醇、PEG400、PEG600和PEG1500反应,高效合成了一系列乙烯基苄基聚乙二醇衍生物,乙烯基苄基氯的转化率可达96%以上,PEG-VBE的分离收率为32%～93%。乙烯基衍生物在过硫酸钾引发下聚合得到水溶性高分子,产物经1H NMR、ESI-HRMS及FT-IR分析表征。以制备的水溶性PEG基聚合物为微反应器,研究了苯甲酸与甲醇的酯化反应,在优化的条件下,苯甲酸的转化率可达99%以上,催化体系循环5次后,催化活性几乎没有下降。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.