聚三亚甲基碳酸酯的研究进展

聚三亚甲基碳酸酯具有良好的生物降解性能及生物相容性,是一种重要的生物降解医用高分子材料,在生物医用领域具有较大的应用前景。本文结合近年来的研究进展,综述了阳离子开环聚合、阴离子开环聚合、配位聚合、酶促开环聚合以及微波开环聚合等方法在聚三亚甲基碳酸酯制备过程中的应用,总结了聚三亚甲基碳酸酯的分子量与物理性能的关系,并重点讨论了聚三亚甲基碳酸酯的体内外降解性能,详细描述了分子量及脂肪酶对聚三亚甲基碳酸酯降解行为的影响,最后总结了聚三亚甲基碳酸酯在生物医用领域的应用。     

聚三亚甲基碳酸酯的生物相容性研究

以实验室自制的聚三亚甲基碳酸酯(PTMC)为研究对象,通过测定聚三亚甲基碳酸酯在体外酶解过程中降解液pH变化,考察其在降解过程中是否产生酸性降解产物;通过MTS法考察聚三亚甲基碳酸酯的体外细胞毒性;通过HE染色的方法考察聚三亚甲基碳酸酯在大鼠体内埋植部位的皮肤刺激性,进而考察聚三亚甲基碳酸酯的生物相容性。结果表明:PTMC在降解过程中不产生酸性降解产物,可避免埋植部位无菌炎症的产生。同时不同分子量的PTMC可以存在于皮下组织而不会造成伤害,因此聚三亚甲基碳酸酯具有良好的生物相容性,可安全植入体内。     

三亚甲基环碳酸酯及2,2-二甲基三亚甲基环碳酸酯开环均聚合*

生物降解聚合物聚三亚甲基环碳酸酯（PTMC）及聚2,2-二甲基三亚甲基环碳酸酯（PDTC）在药物控释载体及其它生物医学技术领域有着良好的应用前景。与脂肪族聚酯不同,PTMC、PDTC降解时,不会产生有害的酸性化合物。PTMC、PDTC主要由三亚甲基环碳酸酯（TMC）及2,2-二甲基三亚甲基环碳酸酯（DTC）开环均聚合制备。本文总结了催化TMC、DTC开环均聚合的不同催化剂及其聚合机理,综述了近年来国内外在TMC、DTC均聚合催化剂开发上的研究进展,并对生物相容性催化剂如稀土催化剂、Ca、Mg、Zn、Fe催化剂以及酶催化剂催化TMC、DTC开环聚合的优缺点进行了比较。     

聚对二氧环己酮改性研究进展*

聚对二氧环己酮（PPDO）,是一种脂肪族聚醚酯,以其优异的生物降解性、生物相容性、生物可吸收性以及优异的柔韧性、抗张强度、打结强度,被成功的应用于医用手术缝线制造,并在骨科固定材料、药物载体等领域有着巨大应用潜力。然而聚对二氧环己酮均聚物由于受到聚合方法及自身结构等方面的限制,未能在更为广泛的领域中得到应用。本文综述了近几年来聚对二氧环已酮改性的最新研究成果,主要从共混改性、化学改性、填充改性3方面进行了较为详细的论述。通过共混改性的方法可以明显改善聚对二氧环已酮在结晶度与体外降解速率等方面的物理、化学性能,而化学改性在改善聚对二氧环已酮的溶解性、分子量、热稳定性等方面发挥了巨大的作用,填充改性的优点在于聚对二氧环已酮与无机粒子性能上的互补、为拓展其应用范围提供了可能。     

聚甲基乙撑碳酸酯/天然高分子复合材料研究进展

聚甲基乙撑碳酸酯(PPC)是一种新型热塑性脂肪族聚碳酸酯,具有良好的生物降解性、高阻隔性和生物相容性等优点,但其热性能和力学性能较差,通过物理和化学方法改性是提高其性能的重要研究方向之一。本文综述了近年来采用淀粉、纤维素和甲壳素等天然高分子对PPC的改性研究,尤其是天然高分子含量和预处理方法等对复合材料性能的影响,并对PPC/天然高分子复合材料的发展作了总结和展望。     

DMSO/DBU/CO_2溶剂体系中原位有机功能催化纤维素碳酸酯的合成及其性质研究

纤维素是地球上储量最丰富的生物可再生资源,具有价格低廉、易改性、可生物降解等特点.纤维素衍生化是拓展纤维素应用的重要手段之一.纤维素碳酸酯是重要的纤维素衍生物之一,在包装材料、热塑性材料、固体电解质等领域具有重要的应用潜力.本文基于1,8-二氮杂二环十一碳-7-烯(DBU)/二甲基亚砜(DMSO)/CO_2体系溶解活化纤维素,通过原位DBU的有机功能催化作用催化纤维素与碳酸二甲酯之间的转酯化反应,合成了纤维素甲基碳酸酯.结果表明,碳酸二甲酯与纤维素脱水葡萄糖单元(AGU)摩尔比为8:1,反应温度为60℃,反应时间为12 h时,可得到取代度(DS)1.09的纤维素碳酸酯,并通过核磁共振、红外光谱、热重分析(TGA/DSC)等表征方法研究纤维素碳酸酯结构与热性能的关系.DSC/TGA结果显示,当纤维素甲基碳酸酯的取代度为1.09时,其玻璃化转变温度为62.9℃,起始降解温度为305.5℃.     

聚丁二酸丁二酯的合成、共聚改性及功能化研究进展

聚丁二酸丁二酯(PBS)因具备良好的物理性能和加工性能而备受关注,是最具有前途的生物降解材料之一。本文总结了PBS材料合成、共聚改性及其功能化方面的研究进展。无规共聚、嵌段共聚等方法可以调节材料的力学性能、生物降解性能、热性能和结晶行为。通过与聚富马酸丁二酯无规共聚或者嵌段共聚,可以利用分子链上的双键高效引入磺酸根、羧酸、氨基等基团,提高材料的亲水性和生物相容性能,并制备PH响应性的电荷翻转胶束,拓展PBS在生物医药领域的应用。     

生物可降解封堵器材料的合成及表征

以L型丙交酯(LLA)、乙交酯(GA)和三亚甲基碳酸酯(TMC)为原料,辛酸亚锡为催化剂,通过开环聚合制备了丙交酯-三亚甲基碳酸酯二元共聚物(PLT)和丙交酯-三亚甲基碳酸酯-乙交脂(PLTG)三元共聚物。采用核磁共振氢谱、傅里叶红外光谱、体积排阻色谱、差热扫描、力学性能测试、血液相容性实验表征了产物的结构与性能,研究了共聚物组成对其结晶能力、热性能和力学性能的的影响。结果表明:所得聚合物的数均分子量均在8×10~4以上,多分散系数在2.0以下。共聚物中的TMC和GA链段使其结晶能力、玻璃化转变温度和拉伸强度与L型聚丙交酯相比均有所下降。三元共聚物PLTG的拉伸强度可达到22.3 MPa,断裂伸长率达到168.7%。另外,共聚物的血液相容性优良。     

聚乙醇酸类生物降解高分子

聚乙醇酸类生物降解高分子具有良好的生物相容性,在药物缓释材料、组织工程材料、手术缝合线等医用领域有广泛的应用。文章按聚乙醇酸类生物降解高分子的种类不同,介绍了它们的合成、性能与应用,尤其是乙醇酸-乳酸共聚物的研究进展。展望聚乙醇酸类生物降解高分子的未来,降低合成成本是广泛应用的关键,因此简单易行的、以乙醇酸等单体为原料的直接缩聚法合成值得关注。     

PHBV纳米纤维的静电纺丝及在生物医用领域的研究进展

聚(3-羟基丁酸酯-3-羟基戊酸酯)(PHBV)纳米纤维具有高比表面积、高孔隙率、生物相容性、生物降解性等优点,可用作生物医用材料.本文综述了基于静电纺丝法制备的PHBV纳米纤维及其在生物医用领域的研究进展,讨论了PHBV纺丝溶液的溶剂、浓度、外加盐类以及聚合物等对PHBV纳米纤维形貌、结构及性能的影响规律,结合目前P...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.