铝型材用消光电泳涂料的研究进展

消光电泳涂料的研究重点是降低材料的光泽,并且达到优异的性能。文章主要介绍铝型材消光电泳的特点、消光原理以及各种不同消光手法。电泳涂料为了得到消光的外观,可以通过两种手段获得:物理消光和化学消光。物理消光法主要采取电泳后处理以及在涂料中添加消光剂来达到消光的目的,化学消光法利用树脂之间的性能差异来降低光泽。文章重点阐述了树脂消光法的原理以及在消光电泳涂料中采取的方法,包括溶解性(SP)差异消光法、内微凝胶消光法、固化温度差消光法等,指出消光树脂的研究方向是制备出能够抑制电解气发生的树脂,使阴极消光电泳涂装成为可能。     

微波消解-电感耦合等离子体原子发射光谱法测定二氧化硅涂料消光剂中10种元素

正消光剂是一种为消除或降低涂料漆膜光泽的助剂,目前涂料中使用的消光剂主要包括有机消光剂和无机消光剂。有机消光剂主要包括蜡和硬脂酸的金属皂,例如:聚乙烯石蜡、氢化蓖麻油蜡状物。无机消光剂主要有超细二氧化硅、滑石粉、高岭土、硅藻土等。二氧化硅是目前涂料中应用最多的无机消光剂[1-3]。随着涂料工业的迅猛发展,为保护人类健康和生态环境,世界主要国家对涂料产品中As、     

沉淀二氧化硅消光剂的制备研究

涂料中的消光剂是一类能够改变涂膜表面光学性能的助剂。这类助剂能够在涂膜表面产生预期微粗糙度,使涂膜的光泽显著降低,给人一种古朴典雅的感觉。近几年来,我国的涂料工业方兴未艾,涂料总产量也跃居世界的前列。在这期间高光泽的亮光涂料以其色泽鲜艳、明亮等优点深受消费者的喜爱,并在相当长的时间内一统着涂料市场[1]。但是,随着人们生活水平的不断提高,一方面消费者感觉到了高光泽的亮光涂料成膜后反光比较严重,对人的眼睛有害;另一方面消费者的审美观念越来越倾向于休闲、时尚和个性化。这些因素就导致了人们对具有柔和外观的低光泽涂…     

硫酸法合成感光树脂光引发剂——硫杂蒽酮及其衍生物

感光性树脂在光致抗蚀材料,光固化涂料、油墨、胶粘剂、封装材料及印刷制板等方面有广泛用途。在光聚合交联感光性树脂中光引发剂为必不可少的组成,它直接影响材料的性能。硫杂蒽酮光引发剂在国外已大量采用。优点为引发速率快,深度固化性能好,氧阻小。国内有关硫杂蒽酮及其衍生物的合成、性能及应用方面的报导尚属鲜见,我们采     

新型光引发剂体系及其应用

紫外光固化技术具有环保、节能、可控等优点而广泛地应用于涂料、油墨、微电子和生物材料的领域,在紫外光固化技术光引发剂体系中起着十分关键的作用,新型高性能光引发剂的研制与开发广受科研工作者的重视,同时光引发剂因其独特的优点而不断的应用到一些新兴的科学领域中。本文介绍了作者课题组近5年来在新型高分子光引发剂方面的研究工作,这些工作主要围绕新型高分子硫杂蒽酮光引发剂、高分子二苯甲酮光引发剂和两亲性高分子光引发剂等三个方面展开,同时还介绍了这些新型的高分子光引发剂体系在微纳米粒子和聚合物刷等方面的应用。     

紫外光固化涂料及其发展状况

紫外光固化涂料具有高效率、低消耗的特点,是一种新型环保节能型涂料。文章综述了紫外光固化涂料的特点、固化原理、主要组成包括齐聚物、活性稀释剂、光引发剂和助剂以及紫外光固化涂料的发展前景。     

可聚合纳米无机氧化物杂化材料的制备及其在紫外光固化涂料中的应用

可聚合纳米无机氧化物杂化材料在紫外光固化涂料中具有较好的分散性能.与涂料中的单体和预聚物进行光聚合形成有机/无机杂化网络结构的聚合物,从而提高涂料固化膜的热稳定性能、硬度和耐磨性能等,在紫外光固化涂料的制备方面有着广阔的应用前景.目前,该类杂化材料主要采用硅烷偶联剂改性、化学接枝改性和溶胶一凝胶方法制备.本文就可聚合纳...     

亚微米级聚苯乙烯/聚硅氧烷核壳粒子的制备及其应用

以乳液聚合制备的聚苯乙烯乳液为种子,加入甲基三甲氧基硅烷(MTMS)水解溶液进行缩聚反应,合成亚微米级聚苯乙烯/聚硅氧烷核壳粒子,并以此作为光散射剂添加至聚甲基丙烯酸甲酯(PMMA)树脂中,制备了光散射材料;考察了亚微米级核壳粒子添加在PMMA树脂中的分散性。结果表明:经过双螺杆剪切作用的挤出加工后,可以实现核壳粒子在PMMA树脂中的良好分散。核壳粒子可以大幅度提高PMMA的雾度,当聚苯乙烯/聚硅氧烷核壳粒子(NS82)的含量为1%时,制得的PMMA样片(厚度为2 mm)的雾度为89%,透光率为69%,有效光散射系数为61%。     

一种用于快速成型工艺的红光光敏树脂的性能研究

合成了一种吸收波长为 6 80nm的菁染料 有机硼盐复合物光引发剂CDBC ,以 6 80nm激光二极管发射的激光作为光源 ,研究了由CDBC、EA6 12、POTMPTA组成的红光光敏树脂在快速成型工艺中的应用 ,考察了影响树脂几个主要性能即粘度、光固化速度、体积收缩率的因素 .结果表明 ,EA6 12含量高 ,POTMPTA含量低 ,树脂粘度大 ,体积收缩率小 ;相反 ,EA6 12含量低 ,POTMPTA含量高 ,则树脂粘度低 ,体积收缩率大 ;光引发剂CDBC含量 5 %以内时对树脂粘度和体积收缩率没有影响 ,CDBC含量增加 ,树脂的表固速度加快 ,但当CDBC含量大于 3%时 ,表固速度基本不变 .预聚物EA6 12质量分数 70 % ,单体POTMPTA质量分数 2 7% ,光引发剂CDBC质量分数 3%时 ,树脂粘度为 4 2 0mPa·s ,表固时间为 1 0s ,固化体积收缩率为 4 0 % ,具有较好的综合性能 .     

顶空-气相色谱法测定丙烯酸盐树脂中残留单体的含量北大核心CSCD

无锡自抛光防污涂料是目前世界范围内应用较广泛且用量较大的海洋防污涂料[1]。丙烯酸盐树脂作为无锡自抛光防污涂料的基料,其研究与应用是开发新型防污涂料的关键[2-3]。因此,丙烯酸盐树脂的研究成为防污涂料领域的热点,其品种和需求量逐渐增加。丙烯酸盐树脂所用的单体多数为丙烯酸类及丙烯酸酯类,这些有机物质易挥发,刺激性气味大,对人的眼睛、呼吸道和皮肤具有刺激性和腐蚀性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.