采用层层自组装与光化学修饰法在聚氨酯表面固定生物多糖衍生物

采用层层自组装技术与光化学修饰方法相结合在聚氨酯材料表面固定生物多糖衍生物,首先合成具有光反应活性的叠氮壳聚糖,再在聚氨酯基材表面进行叠氮壳聚糖与香菇多糖硫酸酯的层层自组装,然后通过光化学反应对自组装多层膜修饰层进行交联,制备得到生物多糖衍生物层层自组装与光化学表面修饰的聚氨酯材料.通过红外光谱、X射线光电子能谱、水接触角测量仪、抗菌活性测试、溶血试验和血小板黏附测试等方法对被修饰聚氨酯材料的表面性能和生物性能进行了分析,测试结果表明修饰后的聚氨酯材料表面的亲水性和血液相容性得到改善,并且被修饰材料对大肠杆菌具有良好的抑制效果.     

不饱和糖功能单体接枝聚氨酯膜的制备及其血液相容性

通过葡萄糖、丙烯酸羟乙酯和丁二胺反应,制备了含不饱和双键的糖基功能单体。 采用傅里叶红外光谱和核磁共振氢谱对合成的产物进行结构表征确定。 采用紫外光引发接枝聚合技术,将制备的不饱和糖单体接枝聚合到聚氨酯膜的表面,以衰减全反射模式下傅里叶红外光谱对表面接枝反应进行了确认。 通过静态水接触角实验和血小板黏附实验,分别对改性聚氨酯膜表面的亲水性和血液相容性进行了研究,结果表明,改性聚氨酯膜表面的接触角从86°降低到45°,血小板的粘附量由14.36×10³ cells/mm²减少到2.57×10³ cells/mm²,亲水性明显增强,血液相容性显著改善。     

基于多巴胺自聚合与表面接枝PHGH制备抗菌纳滤膜

在水溶液中将聚六亚甲基单胍盐酸盐(PHGH)共价接枝在经多巴胺自聚合改性的聚砜膜表面, 制备具有抗菌性能的纳滤膜. 采用全反射红外光谱(ATR-FTIR)、 扫描电子显微镜(SEM)和接触角测试考察膜表面的结构、 形貌和亲水性变化. 探讨PHGH含量对膜的接枝度及分离性能的影响, 并对膜的抗菌性能进行了评价. 结果表明, 经过多巴胺的自聚合和表面接枝PHGH后, 聚砜膜表面形成了具有纳滤分离性能的活性层, 并且膜表面亲水性得到改善. 随着PHGH含量的增大, 膜的纯水通量降低, 而对无机盐和染料的截留性能提高. 接枝后的复合膜具有较高的抗菌性能, 当PHGH含量为3%(质量分数)时, 抗菌率可达98.5%.     

超支化聚酰胺酯改性聚甲基丙烯酸甲酯微流控芯片的制备及其在生物分子分离检测中的应用

利用亲水性超支化聚酰胺酯通过化学键合的方法对聚甲基丙烯酸甲酯(PMMA)微流控芯片的表面进行改性。对改性后PMMA微流控芯片的表面进行了接触角的测定,利用扫描电子显微镜(SEM)和体视显微镜观察了改性后芯片的表面形貌。结果表明,改性后的PMMA微流控芯片表面形成了一层均匀、致密、连续的亲水性涂层,芯片表面的亲水性得到了明显提高,接触角由未改性时的89.9°降低到29.5°。改性后芯片的电渗流较之改性前明显降低。利用芯片对腺苷和L-赖氨酸两种生物分子进行了分离检测。两种生物分子实现了完全分离,所得到的检测峰峰形尖锐,分离清晰。对腺苷和L-赖氨酸的分离柱效(理论塔板数)分别高达8.44×104 塔板/m和9.82×104 塔板/m,分离度(Rs)达到5.31,均远远高于未改性的芯片。改性后的芯片具有良好的分离时间重现性。本研究为提高PMMA微流控芯片的亲水性和应用范围提供了一种新的有效方法。     

聚乙烯中空纤维膜组件整体远程动态等离子体流活化-诱导接枝丙烯酸

采用远程动态Ar等离子体流对聚乙烯(PE)中空纤维膜组件进行整体活化-诱导接枝丙烯酸(AA),制得亲水性能持久的PE中空纤维膜组件(PE-g-AA).这种膜表面等离子体化学改性工艺具有高效、环境友好和表面无(低)损伤等特点.大量—COOH基团的引入使得PE-g-AA组件膜丝外表面的水接触角从120°降至50°左右,且PE-g-AA膜表面的化学结构和物理形貌沿膜丝轴向变得更为均匀;在为期120 d的膜性能老化实验中,经过7次纯水过滤后,PE-g-AA组件的稳态纯水通量仍为原膜的1.5倍左右,水接触角仅恢复约8°,表明PE-g-AA膜组件具有良好亲水稳定性;同时PE-g-AA组件表现出良好的抗牛血清白蛋白污染性,清洗后其纯水通量可恢复到污染前的82%.     

亲水性形状记忆环氧树脂制备及表面浸润性调控

采用聚乙二醇(PEG)对间苯二甲胺(MXDA)固化的TDE-85环氧树脂体系进行改性,制备了亲水性形状记忆环氧树脂,结合微形貌构筑和热响应方式对树脂表面浸润性进行智能调控.结果表明,PEG的引入有效地增加了TDE-85环氧树脂的亲水性.PEG的最佳含量为20%(质量分数)时,树脂表面的接触角为54°,实现了环氧树脂从原始TDE-85/MXDA固化体系表面的疏水性(接触角为108°)到TDE-85/MXDA/PEG固化体系表面亲水性的转变;改性后树脂的玻璃化转变温度Tg为71℃,形状固定率和回复率分别为96.10%和99.97%,表明得到的树脂具有良好的形状记忆性能.进一步采用模板法在树脂表面构筑了微阵列结构,基于形状记忆效应,通过对表面微阵列形态的控制,实现了环氧树脂表面介于亲水性(接触角为51°)与超亲水性(接触角为0°)间的可逆浸润性智能调控.     

两性离子自组装仿生表面的制备、 表征及抗黏附性能

设计与合成了磺酸甜菜碱型的两性离子化合物: N,N-二甲基氨甲酸乙酯基丙基三乙氧基硅烷磺酸内盐(SiNNS), 利用红外光谱(FTIR)和氢核磁共振波谱(¹H NMR)对其分子组成与结构进行了表征. 通过自组装技术将SiNNS分子构筑在玻璃基材表面, 形成了模拟细胞外层膜的仿生表面. 利用原子力显微镜(AFM)、 X光电子能谱(XPS)和接触角测量仪对表面的形貌特征、 化学组成和润湿性进行了表征. 以空白玻璃为对照样品, 研究了这一表面的防雾性能和抗细菌黏附性能. 结果表明, 所制备的两性离子自组装仿生表面具有超亲水性和水下超疏油特性, 其水滴接触角为9.2°, 水下油滴接触角接近180°; 与对照样品相比, 两性离子自组装表面具有优异的防雾性与抗细菌黏附性.     

环氧改性水性聚氨酯乳液的制备及其膜性能

以聚己内酯二元醇(CAPA)为软段,异佛尔酮二异氰酸酯(IPDI)和六亚甲基二异氰酸酯(HDI)为硬段,环氧树脂E-44为大分子交联剂,经相转化法合成了一系列环氧树脂改性负离子水性聚氨酯(EPPU)自乳化乳液,并制备了改性水性聚氨酯的固化膜.通过FTIR、TGA及接触角、力学性能测试对聚合物结构及其膜性能进行了研究.通过原子力显微镜(AFM)观察膜表面形态和表面粗糙度.乳液粒径及粒径分布通过动态激光光散射法(DLLS)测定.FTIR分析表明环氧树脂的羟基和环氧基都参与了发应.TGA表明,环氧树脂的加入可以提高聚氨酯的热稳定性.随着w(E-44)增大,改性聚氨酯膜的拉伸强度得到改善,断裂伸长率减小.随着w(E-44)增大,乳液粒径增大,薄膜的接触角增大,改性后的PU膜表面光滑度下降,拒水性增强.     

聚二甲基硅氧烷表面亲水性的研究

为了使聚二甲基硅氧烷(PDMS)具有较稳定的亲水性表面,利用氧等离子体技术对PDMS表面进行处理。研究了氧等离子体处理PDMS表面的时间、功率、氧气流量等参数对表面亲水性的影响,通过接触角测量和X-射线光电子能谱(XPS)对处理效果进行了评价。实验表明:PDMS经氧等离子体处理后放置700 h的表面接触角为72°,达到了持久改性的目的;XPS分析表明,表面亲水性的改善主要是由于表面极性成分的增加,最后讨论了氧等离子体处理PDMS表面的改性机理。     

丙烯酸水溶液聚合法制备PTFE/PAA/Nafion膜及其性能

采用廉价的多孔聚四氟乙烯(PTFE)膜作为基底, 用少量的Nafion与PTFE膜复合可制备低成本的质子膜. 但疏水性的PTFE膜与亲水性的Nafion膜结合性不佳. 基于此, 本文对疏水性的PTFE膜材料表面进行设计, 先采用丙烯酸对疏水性的PTFE膜表面进行亲水性改性, 再喷涂亲水性Nafion膜, 完成低成本PTFE/PAA/Nafion膜的制备. 实验结果表明, 改性前的PTFE膜材料水接触角为150°, 改性后的膜接触角变为55.6°, 亲水性大幅上升, 膜的机械强度和尺寸稳定性(断裂强度为25.2 MPa, 80 ℃下的溶胀率为11.9%)均优于Nafion117膜, 而 Nafion用量则节省了60%. PTFE/PAA/Nafion膜具有高质子导通率(80 ℃下达到131.9 mS/cm), 接近于Nafion117膜, 最大功率密度可以达到404.2 mW/cm².     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.