氧化硅-石墨烯气凝胶介孔复合材料的合成及其对苯的吸附性能

采用水热法快速合成了一种新型介孔氧化硅-石墨烯气凝胶复合吸附材料(MSGA)。通过X射线衍射、扫描电镜等方法对MSGA进行表征。结果表明,经过水热反应和冻干处理后的MSGA材料的介孔结构保持完好,介孔氧化硅在MSGA中的分散具有高度均一性。当介孔氧化硅的含量达到88.2(wt)%时,MSGA的比表面积可达395.5m~2/g。MSGA材料对苯蒸汽的常温常压吸附量为10.77mL/g,是石墨烯气凝胶的13倍,吸附穿透时间达到石墨烯气凝胶的34.4倍。在0.8%的环境湿度下,由于材料表面羟基的亲和性,进一步提升了对苯的吸附。得益于超低密度和丰富的内部孔隙结构,MSGA能够适应高达500mL/min的气流量。上述结果表明,该复合材料在VOCs消除领域具有广阔的应用前景。     

纳米纤维素基多层级孔道结构碳气凝胶的制备及在锂电池中的应用

采用纳米精磨法对商品桉木浆进行纳米纤丝化处理,得到了高长径比、尺寸均一的纳米纤丝化纤维素(NFC),平均直径为230.10 nm,长度达数十微米.将其组装、干燥后制得具有大量介孔的纳米纤丝化纤维素气凝胶(NFCA).将NFCA在氮气氛围下高温碳化制得碳气凝胶(CNFA),或在氢氧化钾条件下辅助碳化制得具有多层级孔道结构的碳气凝胶(CNFA-A),在保留的碳气凝胶骨架结构上进行孔洞构建.通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)表征及Nanomeasure统计分析,发现NFC的平均直径经碳化后减小到53.16 nm.利用X射线衍射(XRD)、BET比表面积测试和拉曼光谱揭示了碳化处理对纳米纤维素结构、比表面积、石墨化程度和缺陷的影响.结果表明,KOH辅助碳化处理后的碳气凝胶不仅保留了纤维素气凝胶前驱体的网络结构,还在其骨架上二次构建了更多的微孔和介孔,其比表面积高达488.92 m2/g,总孔容为0.404 cm3/g,所得的碳骨架被部分石墨化,具有良好的导电性.这类源于生物质的高比表面积碳气凝胶在被用作锂离子电池(LIB)负极材料时表现出优异的电化学性能,在电流密度1 A/g下连续充放电1000次后比容量达到409 m A·h/g,在电流密度高达20 A/g下,比容量还能维持在219 m A·h/g.     

二氧化钛介孔气凝胶材料在糖肽选择性富集中的应用

以TiO_2介孔气凝胶作为富集材料,考察了其对标准糖蛋白辣根过氧化物酶(HRP)酶解物的富集效果。结果表明,流动相中乙腈浓度和pH对富集结果均有影响,以高有机相酸性条件上样清洗,低有机相碱性条件洗脱为佳。其次以牛血清白蛋白(BSA)为干扰蛋白,考察了TiO_2介孔气凝胶材料对糖肽的富集特异性,并与商品TiO_2颗粒的富集效果进行了对比。结果表明,TiO_2介孔气凝胶材料可在10倍的BSA干扰下实现HRP的选择性富集,富集能力和富集选择性显著优于商品化TiO_2颗粒,这归因于TiO_2介孔气凝胶材料较高的比表面积。研究有助于更好的理解TiO_2介孔气凝胶材料的保留机理,并将其应用于实际样品的预处理中。     

阶层多孔二氧化硅块体材料的制备与表征

以正硅酸甲酯(TMOS)为前驱体、0.01 mol·L-1盐酸为催化剂、聚环氧乙烷(PEO,分子量为10 000)为相分离剂、环氧丙烷(PO)为凝胶促进剂、十二烷基硫酸钠(SDS)为造孔剂,采用溶胶-凝胶伴随相分离制备阶层多孔二氧化硅块体材料,利用差热分析(DTA)、热重分析(TG)、傅里叶变换红外(FT-IR)光谱、扫描电镜(SEM)、X射线衍射(XRD)、N2吸附/脱附装置等测试技术对所制得的阶层多孔块体进行了表征,探究造孔剂SDS对大孔和介孔结构的影响机理。研究表明:SDS在凝胶过程中以胶束的形式进入到骨架中形成介孔孔道;当SDS为0.21 g时,块体材料的阶层多孔结构最优,大孔孔径为1~3μm,介孔孔径为4~5 nm,比表面积为650 m2·g-1;800℃热处理后,大孔结构和骨架上的介孔基本保持,比表面积仍能达到421 m2·g-1,体现出良好的热稳定性。     

柔性交联型聚酰亚胺气凝胶的制备及性能

利用溶胶-凝胶反应制备了聚酰亚胺凝胶, 经过超临界干燥得到了聚酰亚胺气凝胶. 研究了固含量和交联剂比例对气凝胶性能的影响规律. 结果表明, 聚酰亚胺气凝胶的密度和线收缩率都随着固含量和交联剂比例的增加而增加; 随着固含量的增加, 气凝胶的室温热导率呈现出先降低再增加的趋势(0.026~0.033 W·m^-1·K^-1), 气凝胶的力学刚度和强度明显提升; 交联剂的加入, 可以提高材料的韧性, 断裂应变最高达21.7%; 制得的柔性聚酰亚胺气凝胶具有良好的热稳定性, 是满足尖端武器以及空间飞行器对于轻质、 柔性热防护要求的理想材料之一.     

碳气凝胶的孔结构及其对电化学超级电容器性能的影响

通过改变碳气凝胶的溶胶-凝胶制备条件和炭化活化工艺,实现了对碳气凝胶纳米孔洞结构的控制.采用扫描电子显微镜(SEM)和氮气等温气体吸附法对碳气凝胶和KOH活化碳气凝胶的形貌和孔结构进行了表征和分析,并且使用循环伏安法(CV),恒流充放电,电化学阻抗谱(EIS)等检测技术评价了电化学性能.结果表明:发达的三维纳米网络结构与合理的孔径分布是影响碳气凝胶电化学超级电容器性能的关键因素.经适度活化后的碳气凝胶材料含有丰富的介孔,比表面积可达1480m2·g-1.在6mo·lL-1的KOH溶液中,在100mV·s-1的扫描速率下其比电容量高达216F·g-1.通过拟合发现,碳气凝胶类材料的大孔和介孔拥有更高的单位面积比电容量.     

以RF/SiO2复合气凝胶为前驱体制备介孔α-SiC

以间苯二酚(R)和甲醛(F)为碳源,3-氨丙基三乙氧基硅烷为硅源,无水乙醇为溶剂,利用简捷的一步溶胶-凝胶法和超临界干燥工艺制备RF/SiO2复合气凝胶。RF/SiO2复合气凝胶经碳热还原、煅烧、酸洗等一系列工艺制备出介孔碳化硅(SiC),采用XRD、FTIR、NMR、SEM、TEM和氮气吸附-脱附等分析手段对制备的介孔SiC进行了表征。结果表明,介孔SiC材料为纯的α-SiC,平均晶粒大小为15 nm,BET比表面积为106 m2·g-1,孔径主要分布在21.7 nm和61 nm附近,SiC纳米颗粒大小和分布均匀。     

碳材料中多层次孔对负载铂电催化活性的影响

分别以商用碳黑XC-72、介孔碳CMK-5和含多层次孔的碳气凝胶HCA为载体, 微波法负载Pt纳米粒子, 在硫酸和甲醇溶液中进行循环伏安测试, 考察碳材料中多层次孔对其电催化活性的影响. 结果显示, Pt/HCA电极表现出较高的峰电流(7.5 mA·cm-2)和电化学活性面积(128.0 m2·g-1). 这可能是因为碳气凝胶具有连续但非周期性的介孔结构, 有利于Pt纳米粒子的分散以及反应物质的传质.     

疏水二氧化硅气凝胶对甲苯蒸气吸附性能研究

吸附法是控制挥发性有机物(VOCs)的重要方法,对吸附材料的研究有着重要的意义。为了开发出吸附量高、稳定性好的吸附材料,利用溶胶-凝胶法制备出疏水二氧化硅气凝胶,并对其进行了低温氮气吸附、傅里叶变换红外光谱和热重分析,同时对疏水二氧化硅气凝胶进行了甲苯蒸气的静态、动态和循环吸附实验,研究其对甲苯蒸气的吸附性能。结果表明,所制疏水二氧化硅气凝胶为比表面积达732m~2/g的介孔吸附材料,其表面具有疏水性甲基基团,吸附容量高达1.6g/g,吸附稳定性强,动态吸附温升最高达12℃,用Logistic模型拟合吸附穿透曲线相似度高。     

SBA-15负载CeO2纳米晶的溶胶-凝胶一步合成

以P123为模板剂, 正硅酸乙酯和硝酸铈为前驱体, 通过溶胶-凝胶路线在酸性条件下合成了SBA-15负载氧化铈(CeO2与SiO2质量比为28.7%)有序介孔材料. 采用热重/差热分析(TGA/DTA)、X射线衍射(XRD)、透射电镜(TEM)和氮气吸附等手段对所合成材料进行了表征. 结果表明, 合成的材料具有类似于SBA-15的结构, 孔径、孔容和比表面积分别为38.7 Å, 0.46 cm3/g和570 m2/g. X射线衍射(XRD)、透射电镜(TEM)、X射线能谱(EDS)和选区电子衍射花样联合表征证实了铈物种以高分散的CeO2纳米晶的形式分布在介孔基体中.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.