聚三亚甲基碳酸酯的改性研究

聚三亚甲基碳酸酯具有良好的生物降解性能及生物相容性,是一种重要的生物降解医用高分子材料,在生物医用领域具有巨大的潜在应用。本文结合近几年的研究进展,综述了聚三亚甲基碳酸酯改性的三大类方法,详细介绍了聚三亚甲基碳酸酯的功能化方法与途径、讨论了聚三亚甲基碳酸酯与不同类别单体共聚改性的研究现状及性能变化,并总结了共混改性对聚三亚甲基碳酸酯性能的影响,最后介绍了改性后的聚三亚甲基碳酸酯在生物医用领域的应用。     

三亚甲基环碳酸酯及2,2-二甲基三亚甲基环碳酸酯开环均聚合*

生物降解聚合物聚三亚甲基环碳酸酯（PTMC）及聚2,2-二甲基三亚甲基环碳酸酯（PDTC）在药物控释载体及其它生物医学技术领域有着良好的应用前景。与脂肪族聚酯不同,PTMC、PDTC降解时,不会产生有害的酸性化合物。PTMC、PDTC主要由三亚甲基环碳酸酯（TMC）及2,2-二甲基三亚甲基环碳酸酯（DTC）开环均聚合制备。本文总结了催化TMC、DTC开环均聚合的不同催化剂及其聚合机理,综述了近年来国内外在TMC、DTC均聚合催化剂开发上的研究进展,并对生物相容性催化剂如稀土催化剂、Ca、Mg、Zn、Fe催化剂以及酶催化剂催化TMC、DTC开环聚合的优缺点进行了比较。     

聚三亚甲基碳酸酯的生物相容性研究

以实验室自制的聚三亚甲基碳酸酯(PTMC)为研究对象,通过测定聚三亚甲基碳酸酯在体外酶解过程中降解液pH变化,考察其在降解过程中是否产生酸性降解产物;通过MTS法考察聚三亚甲基碳酸酯的体外细胞毒性;通过HE染色的方法考察聚三亚甲基碳酸酯在大鼠体内埋植部位的皮肤刺激性,进而考察聚三亚甲基碳酸酯的生物相容性。结果表明:PTMC在降解过程中不产生酸性降解产物,可避免埋植部位无菌炎症的产生。同时不同分子量的PTMC可以存在于皮下组织而不会造成伤害,因此聚三亚甲基碳酸酯具有良好的生物相容性,可安全植入体内。     

纳米级固定化猪胰脂肪酶催化三亚甲基碳酸酯的开环聚合研究

以纳米级固定化猪胰脂肪酶(IMPPL)催化三亚甲基碳酸酯(TMC)的开环聚合,研究了IMPPL浓度、聚合反应温度和聚合反应时间对聚三亚甲基碳酸酯(PTMC)分子量和产率的影响.同时也研究了回收再利用的IMPPL对TMC开环聚合的催化作用以及IMPPL对PTMC的降解作用.实验结果表明,IMPPL不仅在60～100℃能有效地催化TMC的开环聚合,而且在较高的温度下IMPPL可以有效地催化PTMC的降解.回收使用的固定化酶可表现较高的催化活性及重复利用性.     

天然氨基酸作用下2,2-二甲基三亚甲基碳酸酯的开环聚合

研究了几种中性天然氨基酸存在下2,2-二甲基-三亚甲基环碳酸酯(DTC)的开环聚合反应。1H-NMR和端基滴定分析表明,在聚合反应过程中,DTC上的酰氧键断裂,氨基酸通过氨基接在聚(2,2-二甲基-三亚甲基碳酸酯)链上。3-氨基丙酸、4-氨基丁酸、6-氨基己酸等存在时,DTC的聚合反应也可以发生,但单体的转化率和聚合物的分子量低于天然氨基酸引发的聚合反应。     

开环可控聚合制备脂肪族聚酯的最新研究进展

近年来,作为生物降解高分子材料,脂肪族聚酯由于良好的生物降解性及生物相容性受到人们的广泛关注。脂肪族聚酯在环境友好材料和生物医用材料领域都具有极大的应用价值,目前,部分聚酯材料已经商品化。与此同时,脂肪族聚酯的合成方法尤其是活性开环聚合也成为学术界及工业领域的研究热点。采用开环聚合法得到的聚合产物化学组成精确、分子量分...     

生物可降解封堵器材料的合成及表征

以L型丙交酯(LLA)、乙交酯(GA)和三亚甲基碳酸酯(TMC)为原料,辛酸亚锡为催化剂,通过开环聚合制备了丙交酯-三亚甲基碳酸酯二元共聚物(PLT)和丙交酯-三亚甲基碳酸酯-乙交脂(PLTG)三元共聚物。采用核磁共振氢谱、傅里叶红外光谱、体积排阻色谱、差热扫描、力学性能测试、血液相容性实验表征了产物的结构与性能,研究了共聚物组成对其结晶能力、热性能和力学性能的的影响。结果表明:所得聚合物的数均分子量均在8×10~4以上,多分散系数在2.0以下。共聚物中的TMC和GA链段使其结晶能力、玻璃化转变温度和拉伸强度与L型聚丙交酯相比均有所下降。三元共聚物PLTG的拉伸强度可达到22.3 MPa,断裂伸长率达到168.7%。另外,共聚物的血液相容性优良。     

三(2,6-二叔丁基-4-甲基-苯氧基)镧催化ε-己内酯低温聚合特征及与环碳酸酯嵌段共聚

摘要用三(2,6-二叔丁基-4-甲基-苯氧基)镧[La(OAr)₃]在-15 ℃引发ε-己内酯(CL)的开环聚合, 发现聚合体系具有活性聚合特征. 在第二步聚合过程中继续补加第二种单体三亚甲基环碳酸酯(TMC)或二甲基三亚甲基环碳酸酯(DTC), 可得到CL与环碳酸酯的嵌段共聚物.     

丙交酯开环聚合反应的新型有机催化剂

作为生物高分子降解材料,聚乳酸具有良好的生物相容性和生物降解性,已经广泛应用于包装材料、农用薄膜等环境领域和药物控制释放体系、医用缝合线、组织工程支架等医学领域。丙交酯开环聚合是制备聚乳酸的理想之选,其催化体系目前以金属催化剂为主,但金属离子在聚合物中的痕量残留和细胞毒性限制了聚乳酸在生物医学及微电子领域的应用,而有机催化剂能够克服这些缺点,是目前聚乳酸合成领域的研究热点。本文从不同的活化机理角度,阐述了近年来有机催化剂在合成聚乳酸中的研究进展,总结了各种催化体系在活性、结构可控性及选择性方面的特点,同时展望有机催化剂在开环聚合反应中所面临的机遇与挑战。     

功能聚碳酸酯的合成及表征

脂肪族聚碳酸酯作为生物材料已引起普遍关注,由于其良好的生物相容性、表面溶蚀性和无毒性,在医学领域中得到越来越广泛的应用.迄今已报道的许多脂肪族聚碳酸酯的降解速率相对较慢,如聚三亚甲基碳酸酯的降解速率比聚乳酸和聚己内酯慢很多.但是,如果在聚碳酸酯的侧链上引入亲水性功能基团,其降解速率将会明显提高.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.