乙萘酚在聚N,N-二甲基苯胺/多壁碳纳米管修饰电极上的电化学行为研究

研究了乙萘酚在不同修饰电极上的电化学行为。结果表明:以层层修饰的聚N,N-二甲基苯胺/多壁碳纳米管修饰电极(PDMA/MWNT/GCE)对乙萘酚的电化学响应最佳。在pH为4.86的HAc-NaAc溶液中,乙萘酚在PDMA/MWNT/GCE上是电子数和质子数均为1的扩散控制不可逆电氧化过程,其氧化峰电流与浓度在3.0×10-6～3.0×10-4 mol/L范围内呈良好的线性关系,相关系数R为-0.9958,检出限为2.0×10-6 mol/L,样品测定回收率在94.47%～104.60%之间。     

掺杂多壁碳纳米管改性聚溴甲酚绿膜修饰电极的制备、表征与应用研究

研究了掺杂多壁碳纳米管(MWNT)改性聚溴甲酚绿膜(PBG),以不同修饰方法制备了4种修饰电极,用扫描电镜、交流阻抗及循环伏安法等对电极进行表征。结果表明:4种修饰电极的电活化面积均得到明显提高,其中以层层修饰制备的聚溴甲酚绿膜/多壁碳纳米管复合膜(PBG/MWNT/GC)电极最能发挥MWNT和PBG的电活性。将电极用于8-羟基喹啉(8-HQ)电化学行为的研究,结果表明:4种修饰电极的伏安响应明显提高,且8-HQ在PBG/MWNT/GC上的氧化峰电位负移最多,峰电流最大,约为裸玻碳电极的4.5倍,电催化作用显著增强。8-HQ在PBG/MWNT/GC上电极反应的电子转移数和质子数均为1,是吸附控制的不可逆电氧化过程,氧化峰电流Ip与浓度c在4.0×10-6～3.5×10-4mol/L范围内呈良好的线性关系,r=-0.997 2,检出限(S/N=3)为1.96×10-8mol/L。PBG/MWNT/GC修饰电极可实现8-HQ的快捷、简便测定。     

多壁碳纳米管/纳米Ag-TiO_2膜DNA电化学生物传感器

基于多壁碳纳米管/纳米Ag-TiO2复合膜制备了高灵敏度的DNA电化学生物传感器。将Ag-TiO2复合物与适量分散于N,N-二甲基甲酰胺中的多壁碳纳米管(MWNT)相混合,形成均匀稳定的混合溶液,将其滴涂于裸碳糊电极表面,制得MWNT/Ag-TiO2修饰碳糊电极。碳纳米管大的比表面积和良好的电子传递性能与Ag-TiO2纳米复合物良好的生物相容性和对DNA极好的吸附能力的协同作用,显著提高了DNA探针的固载和DNA杂交的检测灵敏度。应用循环伏安法和电化学交流阻抗谱分别对传感膜的制备和DNA的固定与杂交进行了表征。以电化学交流阻抗谱法对转基因植物外源草丁膦乙酰转移酶基因片段进行了检测,线性范围为1.0×10-11～1.0×10-6mol/L,检出限为3.12×10-12mol/L。     

碳纳米管修饰电极上沙丁胺醇电催化氧化研究

将多壁碳纳米管(MWNT)分散在疏水性表面活性剂双十六烷基磷酸(DHP)溶液中形成稳定、均相的分散液,然后制备多壁碳纳米管-DHP复合膜修饰玻碳电极(MWNT-DHP/GCE).应用方波伏安法研究了沙丁胺醇在修饰电极上的电化学行为,结果表明,碳纳米管复合膜修饰电极对沙丁胺醇的氧化有良好的电催化活性,其氧化反应为一电子一质子过程,氧化电位比裸玻碳电极负移40 mV,峰电流增加了4.5倍.在最佳测试条件下,氧化峰电流与沙丁胺醇浓度在8.3×10-7~3.3×10-6mol/L范围内呈良好线性关系,开路富集2min,检出限达1.8×10-7mol/L.该修饰电极具有良好的重现性、稳定性.     

聚吡咯／多壁碳纳米管修饰电极对多巴胺的测定

制备了聚吡咯/多壁碳纳米管(PPy/MWNT)复合膜修饰电极。研究了神经递质多巴胺(DA)在该修饰电极上的电化学行为。实验表明,PPy/MWNT复合膜修饰电极对DA的电催化作用优于PPy修饰电极。在pH=4.10的0.2mol/L醋酸-醋酸钠缓冲溶液中,DA在该修饰电极上的CV曲线于0.31V和0.28V处出现一对灵敏的氧化还原峰,峰电位差△Ep比裸玻碳电极降低58mV,比PPy修饰电极降低28mV,峰电流显著增加。氧化峰电流ipa与DA浓度在1.0×10-4~7.8×10-8mol/L范围内呈良好的线性关系,线性回归方程为ip(μA)=0.2512 1.2300C(×10-5mol/L),相关系数r=0.9992,检出限为3.9×10-8mol/L。常见物质对DA的检测无干扰,DA注射液样品检测回收率为94%~104%。     

咖啡酸在多壁碳纳米管修饰玻碳电极上的电化学行为及其测定

制备了多壁碳纳米管(MWNT)修饰玻碳电极,并研究了咖啡酸在该电极上的电化学行为及其测定方法,与裸玻碳电极(GCE)相比,MWNT膜修饰电极(MWNT/GCE)能显著提高咖啡酸的氧化峰电流.在pH=3.29的B-R缓冲溶液中,咖啡酸在MWNT/GCE电极上出现1对准可逆的氧化还原峰,Epa=0.47 V,Epc=0.32 V,峰电流与其浓度在5.0×10-7～2.0×10-5 mol/L范围内成线性关系,检出限为5.0×10-7mol/L.实际样品测定的相对标准偏差(RSD)为0.82％(n=5),平均回收率为100.7％.MWNT膜对咖啡酸的电化学氧化有明显的催化作用.该法是一种快捷、可靠、灵敏的检测方法,可以用于咖啡酸含量的测定.     

基于多壁碳纳米管/壳聚糖多层膜修饰玻碳电极邻苯二酚的测定

改进了碳纳米管在壳聚糖溶液中的分散方法,制备了多壁碳纳米管/壳聚糖多层膜修饰玻碳电极,对比了不同修饰层数膜电极的循环伏安和电化学阻抗行为,5层多壁碳纳米管/壳聚糖膜修饰玻碳电极的电化学性能优良.在最优实验条件下,该修饰玻碳电极对邻苯二酚(CAT)有灵敏的响应,CAT浓度在3.99×10-6～9.09×10-4mol/L范围内与氧化峰电流呈良好的线性关系,检出限为2.39×10-6mol/L(S/N=3).该修饰玻碳电极性能稳定,测定4×10-5mol/LCAT溶液,RSD(n=10)为2.1%;15周后,该电极的响应值仅降低1.9%.     

多壁碳纳米管固载亚甲基蓝复合膜修饰玻碳电极测定己烯雌酚

提出了多壁碳纳米管-聚亚甲基蓝(MWNT/PMB)复合膜修饰玻碳电极检测己烯雌酚(DES)的方法,考察了缓冲液、pH、扫描速度等实验参数对测定的影响。在0.2 mol/L的磷酸缓冲液(pH7.0)中,DES在复合膜电极上出现了一个明显的氧化峰,峰电位在0.197 V处。与裸电极相比较,修饰后的电极能显著提高DES的氧化峰电流并降低其氧化电位,表明MWNT/PMB复合膜对DES有电催化作用。峰电流与己烯雌酚浓度在3.73×10-11~3.73×10-8mol/L范围内呈线性关系,检出限为2×10-11mol/L;用此法对己烯雌酚药片的含量进行了测定,测定结果与标示相符。     

毛细管电泳-修饰电极电化学检测法测定饮用水中溴酸盐

通过静电组装技术在碳圆盘电极（PGE）表面制备{聚二烯丙基二甲基氯化铵（PDDA）/多壁碳纳米管（MWCNT）}n/PDDA多膜,并采用循环伏安法在多膜表面电化学修饰一磷钼酸（PMo12）膜,构筑PGE/{PDDA/MWNTs}5/PDDA/PMo12复合膜修饰电极,研究该复合膜修饰电极电化学及其对溴酸盐（BrO3-）电催化还原性质.在此基础上建立毛细管电泳-PGE/{PDDA/MWNTs}5/PDDA/PMo12修饰电极电化学检法定饮用水中溴酸盐分析新方法.在优化实验条件下,电泳峰面积与溴酸根浓度在5.0×10-8～5.0×10-5mol/L范围内呈良好性关系（r=0.9954）,检出为2.0×10-8mol/L（S/N=3）.     

聚甲苯胺蓝-(多壁碳纳米管/PDDA)_n杂化膜修饰印刷电极的制备及其对NADH的测定

利用静电层层组装的方式在印刷电极表面制备了(多壁碳纳米管/邻苯二甲酸二乙二醇二丙烯酸酯(PDDA))n多层膜,采用电位扫描电聚合法在修饰有多层膜的印刷电极表面聚合甲苯胺蓝,制备了聚甲苯胺蓝-(多壁碳纳米管/PDDA)n杂化膜修饰电极。扫描电镜实验表明,多壁碳纳米管均匀分布在杂化膜中,且多壁碳纳米管的掺杂使杂化膜表现出明显的多孔性。电化学实验表明,杂化膜具有良好的导电性且多壁碳纳米管的掺杂显著增加了聚甲苯胺蓝在电极表面的担载量,提高了检测灵敏度。在pH7.4的磷酸盐缓冲液中,杂化膜修饰电极对β-烟酰胺腺嘌呤二核苷酸(NADH)的氧化具有良好的催化作用,与裸电极相比氧化电位降低了560 mV,灵敏度明显提高。在8.7×10-8~1.3×10-4mol/L范围内,NADH的浓度与氧化电流呈线性关系,检出限为2.8×10-8mol/L,该修饰电极可用于NADH的测定。     

Fabrication of Bismuth/Multi-walled Carbon Nanotube Composite Modified Glassy Carbon Electrode for Determination of Cobalt

A bismuth/multi‐walled carbon nanotube (Bi/MWNT) composite modified electrode for determination of cobalt by differential pulse adsorptive cathodic stripping voltammetry is described. The electrode is fabricated by potentiostatic pre‐plating bismuth film on an MWNT modified glassy carbon (GC) electrode. The Bi/MWNT composite modified electrode exhibits enhanced sensitivity for cobalt detection as compared with the bare GC, MWNT modified and bismuth film electrodes. Numerous key experimental parameters have been examined for optimum analytical performance of the proposed electrode. With an adsorptive accumulation of the Co(II)‐dimethylglyoxime complex at ?0.8 V for 200 s, the reduction peak current is proportional to the concentration of cobalt in the range of 4.0×10^?10?1.0×10^?7 mol/L with a lower detection limit of 8.1×10^?11 mol/L. The proposed method has been applied successfully to cobalt determination in seawater and lake water samples.     

Electrocatalytic Dioxygen Reduction at Glassy Carbon Electrode Modified with Polyaniline Grafted Multiwall Carbon Nanotube Film

The work details the electrocatalysis of oxygen reduction reaction (ORR) in 0.5 M H₂SO₄ medium on a modified electrode containing a film of polyaniline (PANI) grafted multi‐wall carbon nanotube (MWNT) over the surface of glassy carbon electrode. We have fabricated a novel modified electrode in which conducting polymer is present as connected unit to MWNT. The GC/PANI‐g‐MWNT modified electrode (ME) is fabricated by electrochemical polymerization of a mixture of amine functionalized MWNT and aniline with GC as working electrode. Cyclic voltammetry and amperometry are used to demonstrate the electrocatalytic activity of the GC/PANI‐g‐MWNT‐ME. The GC/PANI‐g‐MWNT‐ME exhibits remarkable electrocatalytic activity for ORR. A more positive onset potential and higher catalytic current for ORR are striking features of GC/PANI‐g‐MWNT‐ME. Rapid and high sensitivity of GC/PANI‐g‐MWNT‐ME to ORR are evident from the higher rate constant (7.92×10² M^?1 s^?1) value for the reduction process. Double potential chronoamperometry and rotating disk and rotating ring‐disk electrode (RRDE) experiments are employed to investigate the kinetic parameters of ORR at this electrode. Results from RDE and RRDE voltammetry demonstrate the involvement of two electron transfer in oxygen reduction to form hydrogen peroxide in acidic media.     

多壁碳纳米管-Nafion化学修饰电极在高浓度抗坏血酸和尿酸体系中选择性测定多巴胺

多巴胺是人体内一种重要的神经传递物质 ,它参与许多生命过程[1] .因此 ,测定体内多巴胺的浓度十分重要 .多巴胺的电化学分析方法已有不少报道 [2 ,3 ] .然而 ,共存的抗坏血酸和尿酸的电化学性质与多巴胺相似 ,对多巴胺的测定会产生严重干扰 .因此建立一种选择性测定多巴胺的高灵敏度的分析方法就显得尤为重要 .碳纳米管是一种新型的纳米材料 [4 ] ,它的出现引起了广泛的研究兴趣 [5,6] .由于其性质稳定 ,不溶于水及一般的有机溶剂 ,因此限制了其在电分析方面的应用 .本文将多壁碳纳米管分散在 Nafion的无水乙醇中 ,得到了一种均匀的多壁碳…     

多臂碳纳米管/Nafion复合材料修饰玻碳电极测定痕量的铅离子

A composite material of nitric acid oxidized multiwalled carbon nanotube （MWNT） and Nation was prepared. Such composite was modified on a glassy carbon electrode to determine trace of lead by differential pulsed voltammetry. In pH=6.47 NaNO3 solution, Pb^2＋ ions were accumulated on the modified electrode at -0.4 V. Compared with a bare and a Nation film coated electrode, the composite coated GC electrode can reduce the accumulating potential and eliminate the toxic character of mercury. The calibration plots were linear at low concentration of 5.0× 10^-9-2.0× 10^-8 mol/L and high concentration of 2.5× 10^-8-5.0× 10^-6 mol/L. The performances characteristics indicate that the electrode can be used to determine trace Pb^2＋ ions.     

Voltammetric Determination of Hydroquinone using β‐Cyclodextrin/Poly(N‐Acetylaniline)/Carbon Nanotube Composite Modified Glassy Carbon Electrode

Abstract

An electrochemical sensor for hydroquinone (HQ) using β‐cyclodextrin/poly(N‐acetylaniline)/carbon nanotube composite (β‐CD/PAA/MWNTs) modified glassy carbon electrode has been successfully developed. Based on the synergistic effect of MWNTs and conducting PAA polymer and the accumulation effect of β‐CD, the analytical response of the β‐CD/PAA/MWNTs film to the electrochemical behavior of HQ was better than that of a β‐CD/PAA film, a PAA/MWNTs film, a PAA film, or a bare glassy carbon (GC) electrode. Under the conditions chosen, the anodic currents increased linearly with HQ concentration from 1×10^?6 to 5×10^?3 mol l^?1 and the detection limit was 8×10^?7 mol l^?1. This electrochemical sensor showed excellent reproducibility, stability and recovery for the determination of HQ.     

双酚A在氮掺杂多壁碳纳米管修饰电极上的电化学行为及测定

构建了不同百分含量的氮掺杂的多壁碳纳米管化学修饰石墨电极,利用线性扫描伏安法及循环伏安法研究了双酚A(BPA)在修饰电极上的电化学行为。提出了一种灵敏、简便的直接检测双酚A的电化学分析方法。在pH6.98的PBS缓冲溶液中,在电位0.20 V富集后,该修饰电极在0.680 V出现一个灵敏的、峰形好的氧化峰。表明氮掺杂多壁碳纳米管薄膜对双酚A的氧化表现出一定的催化作用,能显著提高双酚A的氧化峰电流。在优化条件下,采用线性扫描伏安法对双酚A进行测定。双酚A的氧化峰电流与其浓度在2.5×10-7～1.0×10-4 mol/L之间有很好的线性关系(R为0.996),检出限为5.0×10-8mol/L。电极已初步用于实际样品中BPA的测定。     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

维生素B6在纳米金/石墨烯修饰电极上的电化学行为

将金纳米粒子电沉积在石墨烯修饰的玻碳电极表面,研究了维生素B6(VB6)在该修饰电极上的电化学行为。扫描电镜用于该修饰电极组装过程的形貌表征。实验结果表明:VB6在此修饰电极上出现一个良好的氧化峰,在最佳实验条件下,其氧化峰电流与VB6浓度在5.0×10-8～2.0×10-5 mol/L范围内呈线性关系,其线性回归方程为I(μA)=0.5697c(μmol/L)+0.06275,R=0.9992,检出限为2.0×10-8 mol/L(S/N=3)。一些常见的干扰物质如抗坏血酸不干扰VB6的检测。方法已用于片剂中VB6的含量的检测。     

聚苯胺薄膜修饰电极对抗坏血酸的电催化氧化

本文表明聚苯胺(PAn)薄膜修饰电极对水溶液中的抗坏血酸(AH_2)在较宽的pH范围和较宽的浓度范围内均有良好的电催化氧化作用, 为EC平行催化过程。利用旋转圆盘电极(RDE)进行了催化过程动力学分析, 求出了催化反应动力学参数。在抗坏血酸浓度10~(-2)～10~(-6) mol·L~(-1)范围内, 催化峰电流与AH_2浓度均成良好的线性关系, 且PAn薄膜修饰电极具有很好的稳定性, 有应用分析抗坏血酸的意义。