A theoretical rationalization of the asymmetric induction in sulfinyl-directed [5C + 2C] intramolecular cycloadditions

A computational DFT examination (B3LYP/6-31G and B3LYP/6-311+G//B3LYP/6-31G) of the thermal [5C + 2C] cycloaddditions of 6-acetoxy-3-pyranones and 3-silyloxy-4-pyrones with tethered alkenyl sulfoxides confirms that the high level of diastereofacial selectivity obtained is ultimately due to the preference of the alkenesulfinyl group to adopt a well-defined conformation in the transition state of the reaction. This conformation, which is different from that found in the ground state, is most probably dictated by dipolar interaction effects between the sulfoxide and the oxidopyrylium ylide intermediate.     

Palladium-catalyzed [3 + 2] intramolecular cycloaddition of alk-5-enylidenecyclopropanes

Readily accessible alk-5-enylidenecyclopropanes undergo [3 + 2] intramolecular cycloaddition reactions upon treatment with appropriate palladium complexes. The method allows the rapid and efficient assembly of a variety of bicyclo[3.3.0]octane systems with up to three stereocenters. Preliminary theoretical calculations uncovered previously unsuspected mechanistic possibilities based on either a concerted pallada-ene-like rearrangement or a stepwise process involving zwitterionic intermediates.     

On the regioselectivity of the Ru-catalyzed intramolecular [5 + 2] cycloaddition

The influence of substituents on which cyclopropyl bond cleaves in the cycloisomerization of cyclopropylenynes catalyzed by CpRu(N&tbd1;CCH(3))(3)(+)PF(6)(-) is compared to the corresponding Rh-catalyzed reaction. With the trans cyclopropyl substrates, the bond energy of the cleaving bond appears to be an important factor. With cis cyclopropyl substrates, steric effects appear to dominate.     

Palladium-catalyzed asymmetric [3 + 2] trimethylenemethane cycloaddition reactions

Transition-metal-catalyzed trimethylenemethane (TMM) [3 + 2] cycloadditions provide direct routes to functionalized cyclopentanes. This reaction has been shown to be a highly chemo-, regio-, and diastereoselective process. We report a palladium-catalyzed asymmetric [3 + 2] trimethylenemethane (TMM) cycloaddition between 3-acetoxy-2-trimethylsilylmethyl-1-propene and various di- and trisubstituted olefins. Yields of exo-methylenecyclopentane products range from 59 to 99%, and enantiomeric excesses range from 58 to 92% ee.     

Preparation of 3-azabicyclo [3.2.0] heptenones by intramolecular [2+2] cycloaddition

Pyrolysis of N-allyl enaminoesters is a general method for the stereoselective synthesis of 3-azabicyclo[3.2.0] heptenones ; the reaction involves a [2+2] intramolecular cycloaddition of an intermediate iminoketene.     

Aqueous-phase deactivation and intramolecular [2 + 2 + 2] cycloaddition of oxanorbornadiene esters

Both inter- and intramolecular degradation pathways were identified for the aqueous phase deactivation of oxanorbornadiene (OND) electrophiles, and propargylic OND esters were found to undergo facile intramolecular [2 + 2 + 2] homo-Diels-Alder cycloaddition in polar media.     

Rhodium-catalyzed enantio- and diastereoselective intramolecular [2 + 2 + 2] cycloaddition of unsymmetrical dienynes

A cationic rhodium(i)/(R)-H(8)-BINAP or (R)-Segphos complex catalyzes an intramolecular [2 + 2 + 2] cycloaddition of unsymmetrical dienynes, leading to fused tri- and tetracyclic cyclohexenes bearing two tertiary or quaternary carbon centers in high yields with high enantio- and diastereoselectivity.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

Bifunctional AgOAc-catalyzed asymmetric [3 + 2] cycloaddition of azomethine ylides

[reaction: see text] A bifunctional AgOAc-catalyzed asymmetric cycloaddition of azomethine ylides with electronic-deficient alkenes was developed using ferrocenyloxazoline-derived N,P ligands. The reactive metal-bound azomethine ylide dipole is formed by the deprotonation with acetate, and extra base is not necessary. The reactions proceed with high enantioselectivity. This method provides an efficient and convenient route to optically active pyrrolidine derivatives.     

Base-assisted intramolecular 6-acetoxypyranone-acetylene [5+2] cycloaddition. Synthesis and reactivity of novel oxa-tricyclo[5.3.1.0]undecenones

The synthesis of 3,11-dioxatricyclo[5.3.1.0^1,5]undeca-5,9-dien-8-ones is reported from suitable 5-substituted furfuryl alcohols bearing an acetylenic side-chain. Successive peracid-mediated oxidative rearrangement of furan carbinols and base-assisted intramolecular 1,3-dipolar cycloaddition afforded oxygen-bridged tricyclo-undecane derivatives. Stereoselective transformations of cycloadducts are also discussed.     

Enantioselective synthesis of tripodal cyclophanes and pyridinophanes by intramolecular [2+2+2] cycloaddition

An enantioselective intramolecular [2+2+2] cycloaddition of 2-aminophenol-tethered triynes and diyne-nitriles proceeded using the chiral Rh catalysts, and tripodal cyclophanes and pyridinophanes with a long ansa chain (up to [16]pyridinophane) were obtained in acceptable yield with high to almost perfect ee. In the reaction of triynes, we elucidated that the oxygen atom at the alkyne terminus is essential for the excellent enantioselectivity. For the construction of cage-type molecule, the choice of rigid tether, which connects 1,6-diyne moiety with a side carbon chain having alkyne or cyano group on its terminus, was important, and 8-amino-2-naphthol moiety was also a preferable tether.     

A highly regio- and stereoselective formation of bicyclo[4.2.0]oct-5-ene derivatives through thermal intramolecular [2 + 2] cycloaddition of allenes

Thermal [2 + 2] cycloaddition of allenes with an additional multiple bond is described. By simply heating the allenenes or allenynes having a three-atom tether in an appropriate solvent such as dioxane or DMF, the distal double bond of the allenic moiety regioselectively participates in the cycloaddition to form bicyclo[4.2.0]oct-5-ene derivatives in good to excellent yields. In all the reactions of allenenes, the olefin geometry was completely transferred to the cycloadducts. While the reaction of terminal allenes afforded bicyclic cyclobutane derivatives as a single isomer, the cycloaddition of some internal allenes with axial chirality yielded a diastereomeric mixture of cycloadducts. These results are in good accordance with the stepwise mechanism through a biradical intermediate with a coplanar allyl radical.     

A formal [3 + 3] cycloaddition reaction. 5. An enantioselective intramolecular formal aza-[3 + 3] cycloaddition reaction promoted by chiral amine salts

A detailed account on chiral secondary amine salt promoted enantioselective intramolecular formal aza-[3 + 3] cycloadditions is described here for the first time. The dependence of enantioselectivity on the structural feature of these chiral amines is thoroughly investigated. This study also reveals a very interesting reversal of the stereochemistry in the respective cycloadducts obtained using C(1)- and C(2)-symmetric amine salts. In addition, the influence of solvents, counteranions, and temperatures on the enantioselectivity is described, and a unified mechanistic model based on experimental results as well as semiempirical calculations is proposed.     

Au-catalyzed asymmetric formal [3 + 2] cycloaddition of isocyanoacetates with maleimides

An efficient protocol for the Au(I)-catalyzed asymmetric formal [3 + 2] cycloaddition of isocyanoacetates with phenylmaleimide has been developed. In the presence of cationic Au(I)/DTBM-segphos complex, excellent diastereoselectivity and high levels of enantioselectivity (up to 97% ee) have been attained with a variety of α-substituted isocyanoacetates. The synthetic potential of the resulting enantioenriched 1-pyrrolines has been demonstrated by the preparation of highly substituted pyrrolidines bearing a quaternary stereocenter.