Multiple reactions of triphenylstannane with Ru(5)(CO)(12)(C(6)H(6))(mu(5)-C) yield bimetallic clusters with unusually large numbers of tin ligands

The cluster complex Ru(5)(CO)(12)(C(6)H(6))(mu(5)-C), 1, undergoes multiple addition reactions with Ph(3)SnH to yield two new bimetallic cluster complexes: Ru(5)(CO)(8)(mu-SnPh(2))(4)(C(6)H(6))(mu(5)-C), 2, 2% yield, and Ru(5)(CO)(7)(mu-SnPh(2))(4)(SnPh(3))(C(6)H(6))(mu(5)-C)(mu-H), 3, 26% yield, containing four and five tin ligands, respectively. Both compounds consist of a square pyramidal Ru(5) cluster with an interstitial carbido ligand and bridging SnPh(2) groups located across each of the four edges of the base of the Ru(5) square pyramid. Compound 3 contains an additional SnPh(3) group terminally coordinated to one of the ruthenium atoms in the square base.     

Germanium-rich pentaruthenium carbonyl clusters including Ru(5)(CO)(11)(mu-GePh(2))(4)(mu(5)-C) and its reactions with hydrogen

The reaction of Ru(5)(CO)(15)(mu(5)-C), 1, with Ph(3)GeH at 150 degrees C has yielded two new germanium-rich pentaruthenium cluster complexes: Ru(5)(CO)(11)(mu-CO)(mu-GePh(2))(3)(mu(5)-C), 2; Ru(5)(CO)(11)(mu;-GePh(2))(4)(mu(5)-C), 3. Both compounds contain square pyramidal Ru(5) clusters with GePh(2) groups bridging three and four of the edges of the Ru(5) square base, respectively. When treated with 1 equiv of Ph(3)GeH at 150 degrees C compound 2 is converted to 3. Reaction of 3 with H(2) at 150 degrees C yielded Ru(5)(CO)(10)(mu-GePh(2))(4)(mu(5)-C)(mu-H)(2), 4, containing two hydride ligands and one less CO ligand. Reaction of 4 with hydrogen at 150 degrees C yielded the compound Ru(5)(CO)(10)(mu-GePh(2))(2)(mu(3)-GePh)(2)(mu(3)-H)(mu(4)-CH), 5, by loss of benzene and conversion of two of the bridging GePh(2) groups into triply bridging GePh groups. Compound 5 contains one triply bridging hydride ligand and a quadruply bridging methylidyne ligand formed by addition of one hydrogen atom to the carbido carbon atom.     

Synthesis of PtRu5(CO)14(PBu(t)3)(mu-H)2(mu6-C) and its reactions with Pt(PBut3)2, HGePh3, and HSnPh3

Reaction of PtRu5(CO)15(PBut3)(C), 3, with hydrogen at 97 degrees C yielded the new dihydride-containing cluster compound PtRu5(CO)14(PBut3)(mu-H)2(mu6-C), 5. Compound 5 was characterized crystallographically and was shown to contain an octahedral cluster consisting of one platinum and five ruthenium atoms with a carbido ligand in the center. Two hydrido ligands bridge two oppositely positioned PtRu bonds. Compound 5 reacts with Pt(PBut3)2 to yield Pt2Ru5(CO)14(PBut3)2(mu-H)2(mu6-C), 6, a Pt(PBut3) adduct of 5, by adding a Pt(PBut3) group as a bridge across one of the Ru-Ru bonds in the square base of the Ru5 portion of the cluster. Compound 6 is dynamically active on the NMR time scale by a mechanism that appears to involve a shifting of the Pt(PBut3) group from one Ru-Ru bond to another. Two new complexes, PtRu5(CO)13(PBut3)(mu-H)3(GePh3)(mu5-C), 7, and PtRu5(CO)13(PBut3)(mu-H)2(mu-GePh2)(mu6-C), 8, were obtained from the reaction of 5 with HGePh3. The cluster of 7 has an open structure in which the Pt(PBut3) group bridges an edge of the square base of the square pyramidal Ru5 cluster. Compound 7 also has three bridging hydrido ligands and one terminal GePh3 ligand. When heated to 97 degrees C, 7 is slowly converted to 8 by cleavage of a phenyl group from the GePh3 ligand and elimination of benzene by its combination with one of the hydrido ligands. The PtRu5 metal cluster of 8 has a closed octahedral shape with a GePh2 ligand bridging one of the Ru-Ru bonds. Two tin-containing compounds, PtRu5(CO)13(PBut3)(mu-H)3(SnPh3)(mu5-C), 9, and PtRu5(CO)13(PBut3)(mu-H)2(mu-SnPh2)(mu6-C), 10, which are analogous to 7 and 8 were obtained from the reaction of 5 with HSnPh3.     

Ruthenium and osmium carbonyl clusters incorporating stannylene and stannyl ligands

The reaction of [Ru(3)(CO)(12)] with Ph(3)SnSPh in refluxing benzene furnished the bimetallic Ru-Sn compound [Ru(3)(CO)(8)(mu-SPh)(2)(mu(3)-SnPh(2))(SnPh(3))(2)] which consists of a SnPh(2) stannylene bonded to three Ru atoms to give a planar tetra-metal core, with two peripheral SnPh(3) ligands. The stannylene ligand forms a very short bond to one Ru atom [Sn-Ru 2.538(1) A] and very long bonds to the other two [Sn-Ru 3.074(1) A]. The germanium compound [Ru(3)(CO)(8)(mu-SPh)(2)(mu(3)-GePh(2))(GePh(3))(2)] was obtained from the reaction of [Ru(3)(CO)(12)] with Ph(3)GeSPh and has a similar structure to that of as evidenced by spectroscopic data. Treatment of [Os(3)(CO)(10)(MeCN)(2)] with Ph(3)SnSPh in refluxing benzene yielded the bimetallic Os-Sn compound [Os(3)(CO)(9)(mu-SPh)(mu(3)-SnPh(2))(MeCN)(eta(1)-C(6)H(5))] . Cluster has a superficially similar planar metal core, but with a different bonding mode with respect to that of . The Ph(2)Sn group is bonded most closely to Os(2) and Os(3) [2.786 and 2.748 A respectively] with a significantly longer bond to Os(1), 2.998 A indicating a weak back-donation to the Sn. The reaction of the bridging dppm compound [Ru(3)(CO)(10)(mu-dppm)] with Ph(3)SnSPh afforded [Ru(3)(CO)(6)(mu-dppm)(mu(3)-S)(mu(3)-SPh)(SnPh(3))] . Compound contains an open triangle of Ru atoms simultaneously capped by a sulfido and a PhS ligand on opposite sides of the cluster with a dppm ligand bridging one of the Ru-Ru edges and a Ph(3)Sn group occupying an axial position on the Ru atom not bridged by the dppm ligand.     

Addition of Pt(PBu(t)(3)) groups to Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C). Synthesis, structures, and dynamical activity

The reaction of Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C), 7, with Pt(PBu(t)(3))(2) yielded two products Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))], 8, and Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](2), 9. Compound 8 contains a Ru(5)Pt metal core in an open octahedral structure. In solution, 8 exists as a mixture of two isomers that interconvert rapidly on the NMR time scale at 20 degrees C, DeltaH() = 7.1(1) kcal mol(-1), DeltaS() = -5.1(6) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 8.6(3) kcal mol(-1). Compound 9 is structurally similar to 8, but has an additional Pt(PBu(t)(3)) group bridging an Ru-Ru edge of the cluster. The two Pt(PBu(t)(3)) groups in 9 rapidly exchange on the NMR time scale at 70 degrees C, DeltaH(#) = 9.2(3) kcal mol(-)(1), DeltaS(#) = -5(1) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 10.7(7) kcal mol(-1). Compound 8 reacts with hydrogen to give the dihydrido complex Ru(5)(CO)(11)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](mu-H)(2), 10, in 59% yield. This compound consists of a closed Ru(5)Pt octahedron with two hydride ligands bridging two of the four Pt-Ru bonds.     

Superloading of tin ligands into rhodium and iridium carbonyl cluster complexes

The reactions of Rh4(CO)12 and Ir4(CO)12 with Ph3SnH have yielded the new Rh-Sn and Ir-Sn cluster complexes M3(CO)6(mu-SnPh2)3(SnPh3)3, 1 (M=Rh) and 2 (M=Ir). Both compounds contain triangular M3 clusters with three bridging SnPh2 and three terminal SnPh3 ligands. The M-M bonds are unusually long. Molecular orbital calculations indicate that this is due to the importance of M-Sn bonding and weak direct M-M interactions. Reaction of 1 with Ph3SnH at reflux in 1,2-dichlorobenzene solvent yielded the complex Rh3(CO)3(SnPh3)3(mu-SnPh2)3(mu3-SnPh)2, 3, which contains eight tin ligands: three terminal SnPh3, three edge-bridging SnPh2, and two triply bridging SnPh ligands.     

Reactivity of triruthenium thiophyne and furyne clusters: competitive S-C and P-C bond cleavage reactions and the generation of highly unsymmetrical alkyne ligands

The synthesis and reactivity of the thiophyne and furyne clusters [Ru3(CO)7(mu-dppm)(mu3-eta2-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, O) is reported. Addition of P(C4H3E)3 to [Ru3(CO)10(mu-dppm)] (1) at room temperature in the presence of Me3NO gives simple substitution products [Ru3(CO)9(mu-dppm)(P(C4H3E)3)] (E = S, 2; E = O, 3). Mild thermolysis in the presence of further Me3NO affords the thiophyne and furyne complexes [Ru3(CO)7(mu-dppm)(mu3-eta2-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, 4; E = O, 6) resulting from both carbon-hydrogen and carbon-phosphorus bond activation. In each the C4H2E (E = S, O) ligand donates 4-electrons to the cluster and the rings are tilted with respect to the mu-dppm and the phosphido-bridged open triruthenium unit. Heating 4 at 80 degrees C leads to the formation of the ring-opened cluster [Ru3(CO)5(mu-CO)(mu-dppm)(mu3-eta3-SC4H3)(mu-P(C4H3S)2)] (5) resulting from carbon-sulfur bond scission and carbon-hydrogen bond formation and containing a ring-opened mu3-eta3-1-thia-1,3-butadiene ligand. In contrast, a similar thermolysis of 3 affords the phosphinidene cluster [Ru3(CO)7(mu-dppm)(mu3-eta2-C4H2O)(mu3-P(C4H3O))] (7) resulting from a second phosphorus-carbon bond cleavage and (presumably) elimination of furan. Treatment of 4 and 6 with PPh3 affords the simple phosphine-substituted products [Ru3(CO)6(PPh3)(mu-dppm)(mu3-eta2-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, 8; E = O, 9). Both thiophyne and furyne clusters 4 and 6 readily react with hydrogen bromide to give [Ru3(CO)6Br(mu-Br)(mu-dppm)(mu3-eta2-eta1-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, 10; E = O, 11) containing both terminal and bridging bromides. Here the alkynes bind in a highly unsymmetrical manner with one carbon acting as a bridging alkylidene and the second as a terminally bonded Fisher carbene. As far as we are aware, this binding mode has only previously been noted in ynamine complexes or those with metals in different oxidation states. The crystal structures of seven of these new triruthenium clusters have been carried out, allowing a detailed analysis of the relative orientations of coordinated ligands.     

Reactions of 2-indolylphosphines with Ru3(CO)12: cluster capping with mu 3,eta 2-indolylphosphine as an anionic six-electron P,N-donor ligand

Stepwise bidentate coordination of the novel indolylphosphine ligands HL (1, HL = P(C(6)H(5))(2)(C(9)H(8)N)(diphenyl-2-(3-methylindolyl)phosphine); 2, HL = P(C(6)H(5))(C(9)H(8)N)(2)(phenyldi-2-(3-methylindolyl)phosphine); and 3, HL = P(C(6)H(5))(C(17)H(12)N(2))(di(1H-3-indolyl)methane-(2,12)-phenylphosphine)) to the ruthenium cluster Ru(3)(CO)(12) is demonstrated. Reactions of 1-3 with Ru(3)(CO)(12) led to the formation of Ru(3)(CO)(11)(HL) (4-6), in which HL is mono-coordinated through the phosphorus atom. The X-ray structures of 4-6 show that the phosphorus atom is equatorially coordinated to the triruthenium core. In all cases, gentle heating of Ru(3)(CO)(11)(HL) resulted in the formation of Ru(3)(CO)(9)(mu-H)(mu(3),eta(2)-L)(7-9) in which the NH proton of the indolyl substituent had migrated to the ruthenium core to form a bridging hydride ligand. The X-ray structure of Ru(3)(CO)(9)(mu-H)[mu(3),eta(2)-P(C(6)H(5))(2)(C(9)H(7)N)] (7) shows the deprotonated nitrogen atom of the indolyl moiety bridging over the face of the triruthenium core, bonding to the two ruthenium metal centers to which the phosphorus atom is not bound. The phosphorus atom is forced to adopt an axial bonding mode due to the geometry of the indolylphosphine ligand. Cluster electron counting and X-ray data suggest that the indolylphosphine behaves as a six-electron ligand in this mode of coordination. Compounds 4-9 have been characterized by IR, (1)H, (13)C and (31)P NMR spectroscopy.     

Addition of palladium and platinum tri-tert-butylphosphine groups to Re-Sn and Re-Ge bonds

The reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3SnH at 68 degrees C yielded the new compound Re2(CO)8(mu-SnPh2)2 (10) which contains two SnPh2 ligands bridging two Re(CO)(4) groups, joined by an unusually long Re-Re bond. Fenske-Hall molecular orbital calculations indicate that the bonding in the Re2Sn2 cluster is dominated by strong Re-Sn interactions and that the Re-Re interactions are weak. The 119Sn M?ssbauer spectrum of 10 exhibits a doublet with an isomer shift (IS) of 1.674(12) mm s(-1) and a quadrupole splitting (QS) of 2.080(12) mm s(-1) at 90 K,characteristic of Sn(IV) in a SnA2B2 environment. The IS is temperature dependent, -1.99(14) x 10(-4) mm s(-1) K(-1); the QS is temperature independent. The temperature-dependent properties are consistent with the known Gol'danskii-Kariagin effect. The germanium compound Re2(CO)8(mu-GePh2)2 (11) was obtained from the reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3GeH. Compound 11 has a structure similar to that of 10. The reaction of 10 with Pd(PBu(t)3)2 at 25 degrees C yielded the bis-Pd(PBu(t)3) adduct, Re2(CO)8(mu-SnPh2)2[Pd(PBu(t)3)]2 (12); it has two Pd(PBu(t)3) groups bridging two of the four Re-Sn bonds in 10. Fenske-Hall molecular orbital calculations show that the Pd(PBu(t)3) groups form three-center two-electron bonds with the neighboring rhenium and tin atoms. The mono- and bis-Pt(PBu(t)3) adducts, Re2(CO)8(mu-SnPh2(2)[Pt(PBu(t)3)] (13) and Re2(CO)8(mu-SnPh2)2[Pt(PBu(t)3)]2 (14), were formed when 10 was treated with Pt(PBu(t)3)2. A mono adduct of 11, Re2(CO)8(mu-GePh2)2[Pt(PBu(t)3)] (15), was obtained similarly from the reaction of 11 with Pt(PBu(t)3)2.     

Activation of metal hydride complexes by tri-tert-butylphosphine-platinum and -palladium groups

The compounds HM(CO)4SnPh3, M = Os (10), Ru (11) are activated in the presence of Pt(PBut3)2 and Pd(PBu(t)3)2 toward the insertion of PhC2H into the M-H bond. The compounds PtOs(CO)4(SnPh3)(PBu(t)3)[mu-HCC(H)Ph], 12, and PtOs(CO)4(SnPh3)(PBu(t)3)[mu-H2CCPh], 13, were obtained from the reaction of 10 with PhC2H in the presence of Pt(PBu(t)3)2. Compounds 12 and 13 are isomers containing alkenyl ligands formed by the insertion of the PhC2H molecule into the Os-H bond at both the substituted and unsubstituted carbon atoms of the alkyne. Both compounds contain a Pt(PBu(t)3) group that is bonded to the osmium atom and a bridging alkenyl ligand that is pi-bonded to the osmium atom. The reaction of 11 with PhC2H in the presence of Pt(PBu(t)3)2 yielded the products PtRu(CO)4(SnPh3)(PBu(t)3)[mu-HC2(H)Ph], 14, and PtRu(CO)4(SnPh3)(PBut3)[mu-H2C2Ph], 15, which are also isomers similar to 12 and 13. The reaction of 11 with PhC2H in the presence of Pd(PBu(t)3)2 yielded the product PdRu(CO)4(SnPh3)(PBu(t)3)[mu-H2C2Ph], 16. Compound 16 contains a Pd(PBu(t)3) group bonded to the ruthenium atom and a bridging H2C2Ph ligand that is pi-bonded to the palladium atom. Compound 10 reacted with Pt(PBu(t)3)2 in the absence of PhC2H to yield the compound PtOs(CO)4(SnPh3)(PBu(t)3)(mu-H), 17. Compound 17 is a Pt(PBu(t)3) adduct of 10. It contains a Pt-Os bond with a bridging hydrido ligand. Compound 17 reacted with PhC2H to yield 12. Compound 12 reacted with PhC2H to yield the compound PtOs(CO)3(SnPh3)(PBu(t)3)[mu-HCC(Ph)C(H)C(H)Ph], 18. Compound 18 contains a bridging 2,4-diphenylbutadienyl ligand, HCC(Ph)C(H)C(H)Ph, that is pi-bonded to the osmium atom and sigma-bonded to the platinum atom. Fenkse-Hall molecular orbitals of 17 were calculated. The LUMO of 17 exhibits an empty orbital on the platinum atom that appears to be the most likely site for PhC2H addition prior to its insertion into the Os-H bond.     

Platinum participation in the hydrogenation of phenylacetylene by Ru5(CO)15(C)[Pt(PBu(t)3)

The hydride and PhC2H complexes, Ru5(CO)14(mu6-C)[Pt(PBut3)](mu-H)2, 2, and Ru5(CO)13(mu5-C)(PhC2H)[Pt(PBut3)], 3, were obtained from the reactions of Ru5(CO)15(C)[Pt(PBut3)], 1, with hydrogen and PhC2H, respectively. Styrene was formed catalytically when hydrogen and PhC2H were allowed to react with 3 in combination, and the complex Ru5(CO)12(mu5-C)[PtPBut3](PhC2H)(mu-H)2, 4, containing both hydrides and a PhC2H ligand was formed. The catalysis is promoted by the presence of the platinum atom in the complexes.     

Bonding Properties of a Novel Inorganometallic Complex, Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) (iPr-DAB = N,N'-Diisopropyl-1,4-diaza-1,3-butadiene), and its Stable Radical-Anion, Studied by UV-Vis, IR, and EPR Spectroscopy, (Spectro-) Electrochemistry, and Density Functional Calculations

Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) was synthesized and characterized by UV-vis, IR, (1)H NMR, (13)C NMR, (119)Sn NMR, and mass (FAB(+)) spectroscopies and by single-crystal X-ray diffraction, which proved the presence of a nearly linear Sn-Ru-Sn unit. Crystals of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB).3.5C(6)H(6) form in the triclinic space group P&onemacr; in a unit cell of dimensions a = 11.662(6) ?, b = 13.902(3) ?, c = 19.643(2) ?, alpha = 71.24(2) degrees, beta = 86.91(4) degrees, gamma = 77.89(3) degrees, and V = 2946(3) ?(3). One-electron reduction of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) produces the stable radical-anion [Ru(SnPh(3))(2)(CO)(2)(iPr-DAB)](*-) that was characterized by IR, and UV-vis spectroelectrochemistry. Its EPR spectrum shows a signal at g = 1.9960 with well resolved Sn, Ru, and iPr-DAB (H, N) hyperfine couplings. DFT-MO calculations on the model compound Ru(SnH(3))(2)(CO)(2)(H-DAB) reveal that the HOMO is mainly of sigma(Sn-Ru-Sn) character mixed strongly with the lowest pi orbital of the H-DAB ligand. The LUMO (SOMO in the reduced complex) should be viewed as predominantly pi(H-DAB) with an admixture of the sigma(Sn-Ru-Sn) orbital. Accordingly, the lowest-energy absorption band of the neutral species will mainly belong to the sigma(Sn-Ru-Sn)-->pi(iPr-DAB) charge transfer transition. The intrinsic strength of the Ru-Sn bond and the delocalized character of the three-center four-electron Sn-Ru-Sn sigma-bond account for the inherent stability of the radical anion.     

New triruthenium clusters as photoinduced DNA-binding and cleaving agents

1-Hydroxybenzotriazole and 1-hydroxypyridine-2-thione were incorporated as ligands with the cluster Ru3(CO)10 (NCMe)2 to give [(mu-H)Ru3(CO)10(mu2-2,3-eta2-NNN(O)C6 H4)] and [(mu-H)Ru3(CO)9(mu2-eta1 : eta2-C5H4N(O)S)], respectively. Irradiation of these two new triruthenium metal clusters individually with 350 nm UV light in a phosphate buffer (pH 6.0) containing form I DNA resulted in single-strand cleavage. Cluster [(mu-H)Ru3(CO)10(mu2-2,3--eta2-NNN (O)C6H4)] was also found to bind to calf thymus DNA upon UV irradiation.     

Reactivity of the heterometallic clusters [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides, including selenium transfer. Crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)], [MCo2(mu3-Se)(CO)7(mu-dppy)], and [RuCo2(mu3-Se)(CO)7(mu-dppm)] [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2

The reactivity of [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides such as Ph3PSe, Ph2P(Se)CH2PPh2, Ph2(2-C5H4N)PSe, Ph2(2-C4H3S)PSe, and Ph2[(2-C5H4N)(2-C4H2S)]PSe has been studied with the aim to obtain new selenido-carbonyl bimetallic clusters. The reactions of the hydrido clusters give two main classes of products: (i) triangular clusters with a mu3-Se capping ligand of the type [MCo2(mu3-Se)(CO)(9-x)L(y)] resulting from the selenium transfer (x = y = 1, 2, with L = monodentate ligand; x = 2, 4, and y = 1, 2, with L = bidentate ligand) (M = Fe, Ru) and (ii) tetranuclear clusters of the type [HMCo3(CO)12xL(y)] obtained by simple substitution of axial, Co-bound carbonyl groups by the deselenized phosphine ligand. The crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)] (1), [MCo2(mu3-Se)(CO)7(mu-dppy)] (M = Fe (16) or Ru (2)), and [RuCo2(mu3-Se)(CO)7(mu-dppm)] (12) are reported [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2]. Clusters 2, 12, and 16 are the first examples of trinuclear bimetallic selenido clusters substituted by phosphines. Their core consists of metal triangles capped by a mu3-selenium atom with the bidentate ligand bridging two metals in equatorial positions. The core of cluster 1 consists of a RuCo3 tetrahedron, each Co-Co bond being bridged by a carbonyl group and one further bridged by a dppy ligand. The coordination of dppy in a pseudoaxial position causes the migration of the hydride ligand to the Ru(mu-H)Co edge. In contrast to the reactions of the hydrido clusters, those with the anionic clusters [MCo3(CO)12]- do not lead to Se transfer from phosphorus to the cluster but only to CO substitution by the deselenized phosphine.     

Synthesis, characterisation, crystal structures, reactivity, and electrochemistry of ruthenium-nitrido, ruthenium-cobalt-imido and ruthenapyrrolidone carbonyl clusters containing alkyne ligands

Thermolysis of [Ru3(CO)9(mu3-NOMe)(mu3-eta2-PhC2Ph)] (1) with two equivalents of [Cp*Co(CO)2] in THF afforded four new clusters, brown [Ru5(CO)8(mu-CO)3(eta5-C5Me5)(mu5-N)(mu4-eta2-PhC2Ph)] (2), green [Ru3Co2(CO)7(mu3-CO)(eta5-C5Me5)2(mu3-NH)[mu4-eta8-C6H4-C(H)C(Ph)]] (3), orange [Ru3(CO)7(mu-eta6-C5Me4CH2)[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (4) and pale yellow [Ru2(CO)6[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (5). Cluster 2 is a pentaruthenium mu5-nitrido complex, in which the five metal atoms are arranged in a novel "spiked" square-planar metal skeleton with a quadruply bridging alkyne ligand. The mu5-nitrido N atom exhibits an unusually low frequency chemical shift in its 15N NMR spectrum. Cluster 3 contains a triangular Ru2Co-imido moiety linked to a ruthenium-cobaltocene through the mu4-eta8-C6H4C(H)C(Ph) ligand. Clusters 4 and 5 are both metallapyrrolidone complexes, in which interaction of diphenylacetylene with CO and the NOMe nitrene moiety were observed. In 4, one methyl group of the Cp* ring is activated and interacts with a ruthenium atom. The "distorted" Ru3Co butterfly nitrido complex [Ru3Co(CO)5(eta5-C5Me5)(mu4-N)(mu3-eta2-PhC2Ph)(mu-I)2I] (6) was isolated from the reaction of 1 with [Cp*Co(CO)I2] heated under reflux in THF, in which a Ru-Ru wing edge is missing. Two bridging and one terminal iodides were found to be placed along the two Ru-Ru wing edges and at a hinge Ru atom, respectively. The redox properties of the selected compounds in this study were investigated by using cyclic voltammetry and controlled potential coulometry. 15N magnetic resonance spectroscopy studies were also performed on these clusters.     

Remarkable dynamical opening and closing of platinum and palladium pentaruthenium carbido carbonyl cluster complexes

The reaction of Ru(5)(CO)(15)(mu(5)-C), 1, with Pt(PBu(t)(3))(2) at room temperature yielded the mixed-metal cluster complex PtRu(5)(CO)(15)(PBu(t)(3))(C), 2, in 52% yield. Compound 2 consists of a mixture of two interconverting isomers in solution. One isomer, 2A, can be isolated by crystallization from benzene/octane solvent. The second isomer, 2B, can be isolated by crystallization from diethyl ether. Both were characterized crystallographically. Isomer 2A consists of a square pyramidal cluster of five ruthenium atoms with a phosphine-substituted platinum atom spanning the square base. Isomer 2B consists of a square pyramidal cluster of five ruthenium atoms with a phosphine-substituted platinum atom on an edge on the square base. The two isomers interconvert rapidly on the NMR time scale at 40 degrees C, deltaG(313)++ = 11.4(8) kcal mol(-1), deltaH++ = 8.8(5) kcal mol(-1), deltaS++ = -8.4(9) cal mol(-1) K(-1). The reaction of Pd(PBu(t)(3))(2) with compound 1 yielded two new cluster complexes: PdRu(5)(CO)(15)(PBu(t)(3))(mu(6)-C), 3, in 50% yield and Pd(2)Ru(5)(CO)(15)(PBu(t)(3))(2)(mu(6)-C), 4, in 6% yield. The yield of 4 was increased to 47% when an excess of Pd(PBu(t)(3))(2) was used. In the solid state compound 3 is structurally analogous to 2A, but in solution it also exists as a mixture of interconverting isomers; deltaG(298)++ = 10.6(6) kcal mol(-1), deltaH++ = 9.7(3) kcal mol(-1), and deltaS++ = -3(1) cal mol(-1) K(-1) for 3. Compound 4 contains an octahedral cluster consisting of one palladium atom and five ruthenium atoms with an interstitial carbido ligand in the center of the octahedron, but it also has one additional Pd(PBu(t)(3)) grouping that is capping a triangular face of the ruthenium cluster. The Pd(PBu(t)(3)) groups in 4 also undergo dynamical interchange that is rapid on the NMR time scale at 25 degrees C; deltaG(298)++ = 11(1) kcal mol(-1), deltaH++ = 10.2(4) kcal mol(-1), and deltaS++ = -3(2) cal mol(-1) K(-1) for 4.     

Ruthenium-cluster-mediated activation of all bonds of a methyl group of 6,6'-dimethyl-2,2'-bipyridine and 2,9-dimethyl-1,10-phenanthroline: transformation of the latter into a 2-alkenyl-9-methyl-1,10-phenanthroline ligand

The treatment of [Ru3(CO)12] with 6,6'-dimethyl-2,2'-bipyridine (Me2bipy) or 2,9-dimethyl-1,10-phenanthroline (Me2phen) in THF at reflux temperature gives the trinuclear dihydride complexes [Ru3(mu-H)2(mu3-L1)(CO)8] (L1 = HCbipyMe 1 a, HCphenMe 1 b), which result from the activation of two C-H bonds of a methyl group. The hexa-, hepta-, and pentanuclear derivatives [Ru6(mu3-H)(mu5-L2)(mu-CO)3(CO)13] (L2 = CbipyMe 2 a, CphenMe 2 b), [Ru7(mu3-H)(mu5-L2)(mu-CO)2(CO)16] (L2 = CbipyMe 3 a, CphenMe 3 b), and [Ru5(mu-H)(mu5-C)(mu-L3)(CO)13] (L3 = bipyMe 4 a, phenMe 4 b) can also be obtained by treating 1 a and 1 b with [Ru3(CO)12]. Compounds 2 a and 2 b have a basal edge-bridged square-pyramidal metallic skeleton with a carbyne-type C atom capping the four Ru atoms of the pyramid base. The structures of 3 a and 3 b are similar to those of 2 a and 2 b, respectively, but an additional Ru atom now caps a triangular face of the square-pyramidal fragment of the metallic skeleton. The most interesting feature of 2 a, 2 b, 3 a, and 3 b is that their carbyne-type C atoms were originally bound to three hydrogen atoms in Me2bipy or Me2phen and, therefore, they arise from the unprecedented activation of all three C-H bonds of C-bound methyl groups. The pentanuclear compounds 4 a and 4 b contain a carbide ligand surrounded by five Ru atoms in a distorted trigonal-bipyramidal environment. They are the products of a series of processes that includes the activation of all bonds (three C-H and one C-C) of organic methyl groups, and are the first examples of complexes having carbide ligands that arise from C-bonded methyl groups. The alkenyl derivatives [Ru5(mu5-C)(mu-p-MeC6H4CHCHphenMe)(CO)13] (5 b), [Ru5(mu-H)(mu5-C)(mu-p-MeC6H4CHCHphenMe)(p-tolC2)(CO)12] (6 b), and [Ru5(mu-H)(mu5-C)(mu-PhCHCHphenMe)(PhC2)(CO)12] (7 b) have been obtained by treating 4 b with p-tolyl- and phenylacetylene, respectively. Their heterocyclic ligands contain an alkenyl fragment in the position that was originally occupied by a methyl group. Therefore, these complexes are the result of the formal substitution of an alkenyl group for a methyl group of 2,9-dimethyl-1,10- phenanthroline.     

Reactions of mu3-alkenyl triruthenium carbonyl clusters with alkynes: synthesis of trinuclear mu-//-alkyne, mu-vinylidene, and mu-dienoyl derivatives

The reactions of doubly face-capped triruthenium cluster complexes of the type [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-R(2)CCHR(1))(mu-CO)(2)(CO)(6)] (HNNMe(2) = 1,1-dimethylhydrazide; R(2)CCHR(1) = alkenyl ligand) with terminal and internal alkynes have been studied in refluxing toluene. The following derivatives have been isolated from these reactions: [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-R(2)CCHR(1))(mu-kappa(2)-//-HCCH)(CO)(7)] (R(1) = R(2) = H, 5; R(1) = Ph, R(2) = H, 6; R(1) = CH(2)OMe, R(2) = H, 7 a; R(1) = H, R(2) = CH(2)OMe, 7 b) from acetylene, [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-HCCH(2))(mu-kappa(2)-//-PhCCPh)(CO)(7)] (11) from diphenylacetylene, and three isomers of [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-HCCH(2))(mu-kappa(2)-//-PhCCH)(CO)(7)] (14, 15 a, and 15 b) from phenylacetylene. These products result from substitution of a CO ligand by the alkyne and contain an Ru--Ru edge bridged by the alkyne ligand in a parallel manner. DFT calculations on selected isomeric products have helped to establish that the type of Ru--Ru edge bridged by the alkyne depends more on kinetic factors related to the size of the alkyne substituents than on the thermodynamic stability of the final products. The preparation of triruthenium cluster complexes with mu-//-alkyne ligands is unprecedented and seems to relate to the fact that the starting trinuclear complexes have their two triangular faces protected by capping ligands. The clusters bearing mu-//-acetylene (5-7) are thermodynamically unstable with respect to their transformation into edge-bridging vinylidene derivatives, [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu(3)-kappa(2)-HCCHR)(mu-kappa(1)-CCH(2))(CO)(7)] (R = H, 8; Ph, 9; CH(2)OMe, 10). DFT calculations have shown that complex 8 is 11.2 kcal mol(-1) more stable than its precursor 5. The thermolysis of compound 11 leads to [Ru(3)(mu(3)-kappa(2)-HNNMe(2))(mu-kappa(4)-H(2)CCHCPhCPhCO)(mu-CO)(2)(CO)(5)] (12), which contains a novel edge-bridging dienoyl ligand that arises from an unusual coupling of diphenylacetylene, carbon monoxide, and the ethenyl ligand of complex 11. A chloro-bridged dimer of trinuclear clusters, [Ru(6)(mu-Cl)(2)(mu(3)-kappa(2)-HNNMe(2))(2)(mu(3)-kappa(2)-HCCH(2))(2)(mu-kappa(2)-PhCCHPh)(2)(mu-CO)(2)(CO)(10)] (13), has been prepared by treating compound 11 with hydrogen chloride. Therefore, edge-bridging parallel alkynes are susceptible to protonation to give edge-bridging alkenyl ligands. Compound 13 is the first complex to contain two alkenyl ligands on a trinuclear cluster, one face-capping and the other edge-bridging.     

Mixed-metal cluster chemistry. 28. Core enlargement of tungsten-iridium clusters with alkynyl, ethyndiyl, and butadiyndiyl reagents

Reaction of [WIr3(mu-CO)3(CO)8(eta-C5Me5)] (1c) with [W(C[triple bond]CPh)(CO)3(eta-C5H5)] afforded the edge-bridged tetrahedral cluster [W2Ir3(mu4-eta2-C2Ph)(mu-CO)(CO)9(eta-C5H5)(eta-C5Me5)] (3) and the edge-bridged trigonal-bipyramidal cluster [W3Ir3(mu4-eta2-C2Ph)(mu-eta2-C=CHPh)(Cl)(CO)8(eta-C5Me5)(eta-C5H5)2] (4) in poor to fair yield. Cluster 3 forms by insertion of [W(C[triple bond]CPh)(CO)3(eta-C5H5)] into Ir-Ir and W-Ir bonds, accompanied by a change in coordination mode from a terminally bonded alkynyl to a mu4-eta2 alkynyl ligand. Cluster 4 contains an alkynyl ligand interacting with two iridium atoms and two tungsten atoms in a mu4-eta2 fashion, as well as a vinylidene ligand bridging a W-W bond. Reaction of [WIr3(CO)11(eta-C5H5)] (1a) or 1c with [(eta-C5H5)(CO)2 Ru(C[triple bond]C)Ru(CO)2(eta-C5H5)] afforded [Ru2WIr3(mu5-eta2-C2)(mu-CO)3(CO)7(eta-C5H5)2(eta-C5R5)] [R = H (5a), Me (5c)] in low yield, a structural study of 5a revealing a WIr3 butterfly core capped and spiked by Ru atoms; the diruthenium ethyndiyl precursor has undergone Ru-C scission, with insertion of the C2 unit into a W-Ir bond of the cluster precursor. Reaction of [W2Ir2(CO)10(eta-C5H5)2] with the diruthenium ethyndiyl reagent gave [RuW2Ir2{mu4-eta2-(C2C[triple bond]C)Ru(CO)2(eta-C5H5)}(mu-CO)2(CO)6(eta-C5H5)3] (6) in low yield, a structural study of 6 revealing a butterfly W2Ir2 unit capped by a Ru(eta-C5H5) group resulting from Ru-C scission; the terminal C2 of a new ruthenium-bound butadiyndiyl ligand has been inserted into the W-Ir bond. Reaction between 1a, [WIr3(CO)11(eta-C5H4Me)] (1b), or 1c and [(eta-C5H5)(CO)3W(C[triple bond]CC[triple bond]C)W(CO)3(eta-C5H5)] afforded [W2Ir3{mu4-eta2-(C2C[triple bond]C)W(CO)3(eta-C5H5)}(mu-CO)2(CO)2(eta-C5H5)(eta-C5R5)] [R = H (7a), Me (7c); R5 = H4Me (7b)] in good yield, a structural study of 7c revealing it to be a metallaethynyl analogue of 3.     

Dynamical intramolecular metal-to-metal ligand exchange of phosphine and thioether ligands in derivatives PtRu5(CO)16(mu6-C)

The complexes PtRu(5)(CO)(15)(PMe(2)Ph)(mu(6)-C) (2), PtRu(5)(CO)(14)(PMe(2)Ph)(2)(mu(6)-C) (3), PtRu(5)(CO)(15)(PMe(3))(mu(6)-C) (4), PtRu(5)(CO)(14)(PMe(3))(2)(mu(6)-C) (5), and PtRu(5)(CO)(15)(Me(2)S)(mu(6)-C) (6) were obtained from the reactions of PtRu(5)(CO)(16)(mu(6)-C) (1) with the appropriate ligand. As determined by NMR spectroscopy, all the new complexes exist in solution as a mixture of isomers. Compounds 2, 3, and 6 were characterized crystallographically. In all three compounds, the six metal atoms are arranged in an octahedral geometry, with a carbido carbon atom in the center. The PMe(2)Ph and Me(2)S ligands are coordinated to the Pt atom in 2 and 6, respectively. In 3, the two PMe(2)Ph ligands are coordinated to Ru atoms. In solution, all the new compounds undergo dynamical intramolecular isomerization by shifting the PMe(2)Ph or Me(2)S ligand back and forth between the Pt and Ru atoms. For compound 2, DeltaH++ = 15.1(3) kcal/mol, DeltaS++ = -7.7(9) cal/(mol.K), and DeltaG(298) = 17.4(6) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 4, DeltaH++ = 14.0(1) kcal/mol, DeltaS++ = -10.7(4) cal/(mol.K), and DeltaG(298) = 17.2(2) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 6, DeltaH++ = 18(1) kcal/mol, DeltaS++ = 21(5) cal/(mol.K) and DeltaG(298) = 12(2) kcal/mol. The shifts of the Me(2)S ligand in 6 are significantly more facile than the shifts for the phosphine ligand in compounds 2-5. This is attributed to a more stable ligand-bridged intermediate for the isomerizations of 6 than that for compounds 2-5. The intermediate for the isomerization of 6 involves a bridging Me(2)S ligand that can use two lone pairs of electrons for coordination to the metal atoms, whereas a tertiary phosphine ligand can use only one lone pair of electrons for bridging coordination.