Synthesis, Characterization, and Comparative Properties of [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] and [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)

The reaction of [PPN](2)[Re(6)C(CO)(19)] with Mo(CO)(6) and Ru(3)(CO)(12) under sunlamp irradiation provided the new mixed-metal clusters [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] and [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)], which were isolated in yields of 85% and 61%, respectively. The compound [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] crystallizes in the monoclinic space group P2(1)/c with a = 20.190 (7) ?, b = 16.489 (7) ?, c = 27.778 (7) ?, beta = 101.48 (2) degrees, and Z = 4 (at T = -75 degrees C). The cluster anion is composed of a Re(6)C octahedral core with a face capped by a Mo(CO)(4) fragment. There are three terminal carbonyl ligands coordinated to each rhenium atom. The four carbonyl ligands on the molybdenum center are essentially terminal, with one pair of carbonyl ligands (C72-O72 and C74-O74) subtending a relatively large angle at molybdenum (C72-Mo-C74 = 147.2(9) degrees ), whereas the remaining pair of carbonyl ligands (C71-O71 and C73-O73) subtend a much smaller angle (C71-Mo-C73 = 100.5(9) degrees ). The (13)C NMR spectrum of (13)CO-enriched [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] shows signals for four sets of carbonyl ligands at -40 degrees C, consistent with the solid state structure, but the carbonyl ligands undergo complete scrambling at ambient temperature. The (13)C NMR spectrum of (13)CO-enriched [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)] at 20 degrees C is consistent with the expected structure of an octahedral Re(6)C(CO)(18) core capped by a Ru(CO)(3) fragment. The visible spectrum of [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] shows a broad, strong band at 670 nm (epsilon = 8100), whereas all of the absorptions of [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)] are at higher energy. An irreversible oxidation wave with E(p) at 0.34 V is observed for [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)], whereas two quasi-reversible oxidation waves with E(1/2) values of 0.21 and 0.61 V (vs Ag/AgCl) are observed for [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)]. The molybdenum cap in [Re(6)C(CO)(18)Mo(CO(4))](2-) is cleaved by heating in donor solvents, and by treatment with H(2), to give largely [H(2)Re(6)C(CO)(18)](2-). In contrast, [Re(6)C(CO)(18)Ru(CO)(3)](2-) shows no tendency to react under similar conditions.     

N(n-Bu)(4)](2)[Pu(NO(3))(6)] and [N(n-Bu)(4)](2)[PuCl(6)]: Starting Materials To Facilitate Nonaqueous Plutonium(IV) Chemistry

The reaction of plutonium(IV) in aqueous nitric acid with tetra-n-butylammonium nitrate leads to the immediate precipitation of [N(n-Bu)(4)](2)[Pu(NO(3))(6)] (1) in high yield. The analogous reaction in HCl with tetra-n-butylammonium chloride gives [N(n-Bu)(4)](2)[PuCl(6)] (2). Both 1 and 2 are soluble in a range of organic solvents and have been characterized by single-crystal X-ray diffraction, IR spectroscopy, and solid- and solution-phase vis-near-IR spectroscopy. 1 and 2 provide facile synthetic entry routes to study plutonium(IV) ligand complexation reactions in organic solvent media under both air/moisture-stable and -sensitive conditions.     

(C5H6N4O)(C5H5N4O)3(C5H4N4O)[Bi2Cl11]Cl2 as a simple and efficient catalyst in Biginelli reaction

A highly efficient and facile procedure for the one‐pot three‐component synthesis of 3,4‐dihydropyrimidin‐2‐(1H )ones/thiones from the one‐pot condensation of aldehyde, β‐dicarbonyl compound and urea/thiourea was developed. The methodology is applicable to a wide range of substrates with high yield in the presence of (C₅H₆N₄O)(C₅H₅N₄O)₃(C₅H₄N₄O)[Bi₂Cl₁₁]Cl₂. The complex is an air‐stable, environmentally friendly and recoverable catalyst and can efficiently catalyze the Biginelli reaction. The catalyst has high catalytic efficiency with low catalyst loading, and can be recycled ten times with only a small loss of activity.     

The new thioantimonate(V) (C3H10N)[NiSbS4(C6H18N4)]

Turquoise crystals of the title salt, propyl­ammonium di‐μ‐thio‐1:2κ⁴S‐di­thio‐2κ²S‐tris(2‐amino­ethyl)­amine‐1κ⁴N‐anti­mony(V)­nickel(II), (C₃H₁₀N)[NiSbS₄(C₆H₁₈N₄)] or [PAH][Ni(tren)SbS₄] [where tren is tris(2‐amino­ethyl)­amine and PA is propyl­amine], were synthesized under solvothermal conditions by reacting [Ni(tren)₂]Cl₂, Sb and S in a solution of PA. The Ni^II ion is octahedrally surrounded by four N atoms of the tetradentate tren mol­ecule and by two S atoms of the tetrahedral [Sb^VS₄]^3? anion, thus forming the anionic [Ni(tren)SbS₄]^? part of the compound. Charge balance is achieved through the PAH⁺ cation. An extended intermolecular hydrogen‐bonding network is observed between the anion and the cation.     

Crystal structure and luminescence of lanthanide monodentate complexes [Ln(C(4)N(4)H(6)O)(2)(H(2)O)(6)]Cl(3) and [Ln(C(4)N(4)H(6)O)(2)(H(2)O)(3)(NO(3))(3)] (Ln = Tb or Eu)

New eight- and nine-coordinate luminescent europium(III) and terbium(III) complexes 1-4 with carbonyl group coordination have been prepared using the monodentate ligand (L) 2,4-diamino-6-hydroxy pyrimidine and characterized by X-ray and spectroscopic methods.     

(Bu4N)[Re{NB(C6F5)3}Cl4(OH2)] – Struktur und EPR-Spektren

(Bu₄N)[Re{NB(C₆F₅)₃}Cl₄(OH₂)] – Structure and EPR Spectra The title compound represents the first structurally characterized rhenium(VI) complex with a bridging nitrido ligand. It has been prepared by the reaction of (Bu₄N)[ReNCl₄] with B(C₆F₅)₃ in CH₂Cl₂. An almost linear (170.5(3)°) nitrido bridge with a Re≡N bond length of 1.672(4) Å is formed. The coordination position trans to the multiple bond is occupied by a molecule of water. The EPR parameters of the title complex are reported and discussed with those of [ReNCl₄]^– concerning the spin-density distribution in the ‘‘ReNCl₄”︁”︁ unit.     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

Bridging nitrate groups in [Mn(4)O(3)(NO(3))(O(2)CMe)(3)(R(2)dbm)(3)] (R = H, Et) and [Mn(4)O(2)(NO(3))(O(2)CEt)(6)(bpy)(2)](ClO(4)): acidolysis routes to tetranuclear manganese carboxylate complexes

New synthesis procedures are described to tetranuclear manganese carboxylate complexes containing the [Mn(4)O(2)](8+) or [Mn(4)O(3)X](6+) (X(-) = MeCO(2)(-), F(-), Cl(-), Br(-), NO(3)(-)) core. These involve acidolysis reactions of [Mn(4)O(3)(O(2)CMe)(4)(dbm)(3)] (1; dbm is the anion of dibenzoylmethane) or [Mn(4)O(2)(O(2)CEt)(6)(dbm)(2)] (8) with HX (X(-) = F(-), Cl(-), Br(-), NO(3)(-)); high-yield routes to 1 and 8 are also described. The X(-) = NO(3)(-) complexes [Mn(4)O(3)(NO(3))(O(2)CR)(3)(R'(2)dbm)(3)] (R = Me, R' = H (6); R = Me, R' = Et (7); R = Et, R' = H (12)) represent the first synthesis of the [Mn(4)O(3)(NO(3))](6+) core, which contains an unusual eta(1):mu(3)-NO(3)(-) group. Treatment of known [Mn(4)O(2)(O(2)CEt)(7)(bpy)(2)](ClO(4)) with HNO(3) gives [Mn(4)O(2)(NO(3))(O(2)CEt)(6)(bpy)(2)](ClO(4)) (15) containing a eta(1):eta(1):mu-NO(3)(-) group bridging the two body Mn(III) ions of the [Mn(4)O(2)](8+) butterfly core. Complex 7 x 4CH(2)Cl(2) crystallizes in space group P2(1)2(1)2(1) with (at -168 degrees C) a = 21.110(3) A, b = 22.183(3) A, c = 15.958(2) A, Z = 4, and V = 7472.4(3) A(3). Complex 15 x (3)/(2)CH(2)Cl(2) crystallizes in space group P2(1)/c with (at -165 degrees C) a = 26.025(4) A, b = 13.488(2) A, c = 32.102(6) A, beta = 97.27(1) degrees, Z = 8, and V = 11178(5) A(3). Complex 7 contains a [Mn(4)(mu(3)-O)(3)(mu(3)-NO(3))](6+) core (3Mn(III), Mn(IV)) as seen for previous [Mn(4)O(3)X](6+) complexes. Complex 15 contains a butterfly [Mn(4)(mu(3)-O)(2)](8+) core. (1)H NMR spectra have been recorded for all complexes reported in this work and the various resonances assigned. All complexes retain their structural integrity on dissolution in chloroform and dichloromethane. Magnetic susceptibility (chi(M)) data were collected on 12 in the 5-300 K range in a 10.0 kG (1 T) field. Fitting of the data to the theoretical chi(M) vs T expression appropriate for a [Mn(4)O(3)X](6+) complex of C(3)(v)() symmetry gave J(34) = -23.9 cm(-)(1), J(33) = 4.9 cm(-)(1), and g = 1.98, where J(34) and J(33) refer to the Mn(III)Mn(IV) and Mn(III)Mn(III) pairwise exchange interactions, respectively. The ground state of the molecule is S = 9/2, as found previously for other [Mn(4)O(3)X](6+) complexes. This was confirmed by magnetization data collected at various fields and temperatures. Fitting of the data gave S = 9/2, D = -0.45 cm(-1), and g = 1.96, where D is the axial zero-field splitting parameter.     

Syntheses and structures of two chiral zincophosphite compounds: [Zn(C8H8N2)(HPO3)] and (C6H13N2)[Zn3(C6H12N2)(HPO3)3(H2PO3)

Employing achiral organic amines (2-methylbenzimidazole and 1,4-diazabicyclo[2.2.2]octane) as the structure-directing agent and ligand, two chiral zincophosphites, [Zn(C(8)H(8)N(2))(HPO(3))] 1 and (C(6)H(13)N(2))[Zn(3)(C(6)H(12)N(2))(HPO(3))(3)(H(2)PO(3))] 2, have been hydro(solvo)-thermally synthesized, crystallizing in the chiral space group P2(1)2(1)2(1). Single-crystal structural analysis reveals that compound 1 consists of alternating ZnO(3)N and HPO(3) units exhibiting a neutral one-dimensional chiral chain. Interestingly, the organic ligands interact with the inorganic chain via hydrogen-bonds in hydrogen-bonded helix fashion. Compound 2, a three-dimensional chiral open framework with 16-MR channels, is formed by the distorted {Zn(3)P(4)} secondary building unit (SBU). The organic amine molecules play dual roles as both ligands and countercations.     

Further evidence for the tetraoxoiodate(V) anion,IO(4)(3-): hydrothermal syntheses and structures of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O and Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O

The hydrothermal reaction of MoO(3) with BaH(3)IO(6) at 180 degrees C for 3 days results in the formation of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O (1). Under similar conditions, the reaction of Ba(OH)(2) x 8H(2)O with MoO(3) and Ba(IO(4))(2) x 6H(2)O yields Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O (2). The structure of 1, determined by single-crystal X-ray diffraction, consists of corner- and edge-sharing distorted MoO(6) octahedra that create two-dimensional slabs. Contained within this molybdenum oxide framework are approximately C(2v) tetraoxoiodate(V) anions, IO(4)(3-), that are involved in bonding with five Mo(VI) centers. The two equatorial oxygen atoms of the IO(4)(3-) anion chelate a single Mo(VI) center, whereas the axial atoms are mu(3)-oxo groups and complete the octahedra of four MoO(6) units. The coordination of the tetraoxoiodate(V) anion to these five highly electropositive centers is probably responsible for stabilizing the substantial anionic charge of this anion. The Ba(2+) cations separate the layers from one another and form long ionic contacts with neighboring oxygen atoms and a water molecule. Compound 2 also contains distorted MoO(6) octahedra. However, these solely edge-share with octahedral hexaoxoiodate(VII), IO(6)(5-), anions to form zigzagging one-dimensional, (1)(infinity)[(MoO(2))(IO(6))](3-), chains that are polar. These chains are separated from one another by Ba(2+) cations that are coordinated by additional water molecules. Bond valence sums for the iodine atoms in 1 and 2 are 5.01 and 7.03, respectively. Crystallographic data: 1, monoclinic, space group C2/c, a = 13.584(1) A, b = 7.3977(7) A, c = 20.736(2) A, beta = 108.244(2) degrees, Z = 4; 2, orthorhombic, space group Fdd2, a = 13.356(7) A, b = 45.54(2) A, c = 4.867(3) A, Z = 8.     

Synthetic Strategies To Obtain V-P-O Open Frameworks Containing Organic Species as Structural Directing Agents. Crystal Structure of the V(IV)-Fe(III) Bimetallic Phosphate [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)][Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O

A general synthetic approach to rationalize the solution preparative chemistry of oxovanadium phosphates containing organic species as structural directing agents is presented. Careful attention is payed to the hydrolysis and condensation processes involving the ionic species in solution, and a simple restatement of the partial charge model (PCM) has been used in order to organize the experimental results. The structure of a new V(IV)-Fe(III) bimetallic oxovanadium phosphate, [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)] [Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O, has been determined by X-ray single crystal diffraction methods. This compound crystallizes in the monoclinic system, space group P2(1)/n and the cell dimensions are as follows: a = 14.383(3) ?, b = 10.150(2) ?, c = 18.355(4) ?, and beta = 90.39(3) degrees (Z = 2). The existence of a complex intercrossing channel system, including a very large channel of 18.4 ? of diameter (in which both water molecules and ethylenediamine species are located), is the more interesting feature of this structure. Thermal decomposition, including the dehydration/rehydration process, has been studied by thermal analysis and variable temperature X-ray powder diffraction techniques. A complementary SEM study of the different intermediate decomposition products is presented.     

Darstellung und Strukturen von (Et4N)2[Re(CO)3(NCS)3] und (Et4N)[Re(CO)2Br4]

Syntheses and Structures of (Et₄N)₂[Re(CO)₃(NCS)₃] and (Et₄N)[Re(CO)₂Br₄] Rhenium(I) and rhenium(III) carbonyl complexes can easily be prepared by ligand exchange reactions starting from (Et₄N)₂[Re(CO)₃Br₃]. Using nonoxidizing reagents the facial Re^I(CO)₃ unit remains and only the bromo ligands are exchanged. Following this procedure, (Et₄N)₂[Re(CO)₃(NCS)₃] can be obtained in high yield and purity using trimethylsilylisothiocyanate. The compound crystallizes in the monoclinic space group P2₁/n, a = 18.442(5), b = 17.724(3), c = 18.668(5) Å, β = 92.54(1)°, Z = 8. The NCS^? ligands are coordinated via nitrogen. The reaction of [Re(CO)₃Br₃]^2? with Br₂ yields the rhenium(III) anion [Re(CO)₂Br₄]^?. The tetraethylammonium salt of this complex crystallizes in the noncentrosymmetric, orthorhombic space group Cmc2₁, a = 8.311(1), b = 25.480(6), c = 8.624(1) Å, Z = 4. The carbonyl ligands are positioned in a cis arrangement. Their strong trans influence causes a lengthening of the Re? Br bond distances by at least 0.05 Å.     

Conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster: synthesis of [(CH3)C(NH2)(2)](4)[Re(6)Se(8)(CN)(6)] by a solvothermal route

The compound [(CH(3))C(NH(2))(2)](4)[Re(6)Se(8)(CN)(6)] has been synthesized by the reaction at 200 degrees C for 3 days of Re(4)Te(4)(TeCl(2))(4)Cl(8), KSeCN, and NH(4)Cl in superheated acetonitrile. This compound crystallizes in the space group C2/c of the monoclinic system with four formula units in a cell of dimensions a = 20.3113(14) A, b = 10.1332(7) A, c = 19.9981(14) A, beta = 106.754(1) degrees, V = 3941.3(5) A(3) (T = 153 K). The [Re(6)Se(8)(CN)(6)](4-) anion comprises an Re(6) octahedron face capped by mu(3)-Se atoms, with each Re atom liganded by a CN group. The anions and cations are connected by an extensive network of hydrogen bonds. The conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster appears to be unprecedented.     

Coordination Chemistry of 2,2'-Dipyridyl Diselenide: X-ray Crystal Structures of PySeSePy, [Zn(PySeSePy)Cl(2)], [(PySeSePy)Hg(C(6)F(5))(2)], [Mo(SePy)(2)(CO)(3)], [W(SePy)(2)(CO)(3)], and [Fe(SePy)(2)(CO)(2)] (PySeSePy = C(5)H(4)NSeSeC(5)H(4)N; SePy = [C(5)H(4)N(2-Se)-N,Se])

The coordination chemistry of 2,2'-dipyridyl diselenide (PySeSePy) (2) (C(10)H(8)N(2)Se(2)) has been investigated and its crystal structure has been determined (monoclinic, P2(1)/c, a = 10.129(2) ?, b = 5.7332(12) ?, c = 19.173(3) ?, beta = 101.493(8) degrees, Z = 4). In metal complexes the ligand was found to coordinate in three different modes, as also confirmed by X-ray structure determination. N,N'-coordination was found in the zinc complex [Zn(PySeSePy)Cl(2)] (3) (C(10)H(8)Cl(2)N(2)Se(2)Zn, triclinic, P&onemacr;, a = 7.9430(10) ?, b = 8.147(2) ?, c = 11.999(2) ?, alpha = 93.685(10) degrees, beta = 107.763(10) degrees, gamma = 115.440(10) degrees, Z = 2) and Se,Se'-coordination in the adduct of the ligand with bis(pentafluorophenyl)mercury(II) [PySeSePyHg(C(6)F(5))(2)] (5) (C(10)H(8)F(10)HgN(2)Se(2), monoclinic, P2(1)/n, a = 7.7325(10) ?, b = 5.9974(14) ?, c = 25.573, beta = 98.037(10) degrees, Z = 2), which however displays only weak interactions between selenium and mercury. The reaction of the ligand with norbornadiene carbonyl complexes of molybdenum and tungsten leads to reductive cleavage of the selenium-selenium bond with oxidation of the metal center and concomitant addition of the resulting selenolate to the metal carbonyl fragment. Thus the 7-coordinate complexes [Mo(SePy)(2)(CO)(3)] (6) (C(13)H(8)MoN(2)O(3)Se(2), monoclinic, P2(1)/n, a = 9.319(3) ?, b = 12.886(5) ?, c = 13.231(6) ?, beta = 109.23(3) degrees, Z = 4) and [W(SePy)(2)(CO)(3)] (7) (C(13)H(8)N(2)O(3)Se(2)W, monoclinic, P2(1)/n, a = 9.303(2) ?, b = 12.853(2) ?, c = 13.232(2) ?, beta = 109.270(10) degrees, Z = 4) were obtained. The same N,Se-coordination pattern emerges from the reaction of [Fe(2)(CO)(9)] with (2) leading to [Fe(SePy)(2)(CO)(2)] (8) (C(12)H(8)FeN(2)O(2)Se(2), monoclinic, P&onemacr;, a = 8.6691(14) ?, b = 12.443(2) ?, c = 14.085(2) ?, alpha = 105.811(10) degrees, beta = 107.533(8) degrees, gamma = 92.075(10) degrees, Z = 4).