Sustainable Chromium (VI) Removal from Contaminated Groundwater Using Nano-Magnetite-Modified Biochar via Rapid Microwave Synthesis

This study developed a nano-magnetite-modified biochar material (m-biochar) using a simple and rapid in situ synthesis method via microwave treatment, and systematically investigated the removal capability and mechanism of chromium (VI) by this m-biochar from contaminated groundwater. The m-biochar was fabricated from reed residues and magnetically modified by nano-Fe₃O₄. The results from scanning electron microscopy (SEM) and X-ray diffraction (XRD) characterisations confirmed the successful doping of nano-Fe₃O₄ on the biochar with an improved porous structure. The synthesised m-biochar exhibited significantly higher maximum adsorption capacity of 9.92 mg/g compared with that (8.03 mg/g) of the pristine biochar. The adsorption kinetics followed the pseudo-second-order model and the intraparticle diffusion model, which indicated that the overall adsorption rate of Cr(VI) was governed by the processes of chemical adsorption, liquid film diffusion and intramolecular diffusion. The increasing of the pH from 3 to 11 significantly affected the Cr(VI) adsorption, where the capabilities decreased from 9.92 mg/g to 0.435 mg/g and 8.03 mg/g to 0.095 mg/g for the m-biochar and pristine biochar, respectively. Moreover, the adsorption mechanisms of Cr(VI) by m-biochar were evaluated and confirmed to include the pathways of electrostatic adsorption, reduction and complexation. This study highlighted an effective synthesis method to prepare a superior Cr(VI) adsorbent, which could contribute to the effective remediation of heavy metal contaminations in the groundwater.     

Oxidized Biomass and Its Usage as Adsorbent for Removal of Heavy Metal Ions from Aqueous Solutions

Nowadays, very coarse wool fibers are considered waste biomass and are discarded at random or burned. Therefore, it is of actual interest to valorize coarse wool fibers as utile products. In this sense, we report herein an environmentally-friendly process for the preparation of a new material based on oxidized wool fibers and designed for efficient adsorption of heavy metals from wastewater. The morphology and the structure of the obtained product were characterized by scanning electron microscopy (SEM) coupled with an X-ray energy-dispersive module (EDX) and by Fourier-transform infrared spectroscopy (FTIR). Likewise, the performances of the oxidized wool fibers for the adsorption of heavy metal cations (Cu²⁺, Cd²⁺, Pb²⁺) from aqueous solutions were tested. The adsorption kinetics data were analyzed by applying the pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models. The equilibrium of the adsorption process was investigated by using the Freundlich and Langmuir isotherm models. According to the Langmuir isotherms registered at 300 K, the maximum adsorption capacities of the oxidized wool were found to increase from Cu²⁺ (9.41 mg/g) and Cd²⁺ (10.42 mg/g) to Pb²⁺ (30.71 mg/g). Consequently, the removal efficiency of metal ions was found to vary in the range of 96.8–99.7%. The thermodynamic parameters (e.g., enthalpy, entropy, and Gibbs free energy) were calculated and discussed.     

Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.     

Optimization of Parameters for Cr(VI) Adsorption on Used Black Tea Leaves

Dynamic characteristics of Cr(VI) sorption on used black tea leaves (UBTLs) as a low-cost adsorbent are studied. Batch experiments were conducted to evaluate the effects of Cr(VI) concentration, solution pH and temperature on the removal process. Both of adsorption and reduction, involved in the process, are affected by the processing parameters. The adsorption kinetics is described successfully using pseudo-second order rate equation and the rate constant decreases with increasing the initial concentration of Cr(VI) up to 150 mg/L (for 0.1 g/L UBTLs) then becomes slow. Experimental and calculated kinetic data for equilibrium are well expressed by Langmuir isotherm. The solution pH has a profound effect on the adsorption rate. The rate constant increases linearly with an increase in temperature, and the low value of activation energy of adsorption, 16.3 kJ/mol, indicates that Cr(VI) is easily adsorbed on UBTLs. The maximum Cr(VI) adsorptive conditions, with a minimum reduction, were achieved from the dynamics of operational parameters: the initial Cr(VI) concentration < 150 mg/L (for 0.1 g/L UBTLs); the initial solution pH = 1.54–2.00 and the processing temperature < 50 ^∘C, for the possibility of its practical application.     

Adsorption Studies of Cr(III) & Cr(VI) on Lead Sulphide,Copper Sulphide & Zinc Sulphide-Determination Cr(III) in the Presence of Cr(VI)

Abstract

The adsorption studies of Cr(VI) in presence of Cr(III) on the sulphide of Lead, Zinc and Copper has been studied. It has been found that in case of lead sulphide 100% adsorption of Cr(VI) took place at pH 4.0 and of Cr(III) at pH 7.0. While in case of zinc sulphide the 100% adsorption of Cr(VI) took place at pH 4.5 and of Cr(III) at pH 6.5. In case of copper sulphide 100% adsorption of Cr(VI) took place at pH 5.0 and of Cr(III) at pH 7.0. This difference in adsorption at different pH values forms the basis for the determination of these ions. The method is accurate.     

Enhancing Removal of Cr(VI), Pb2+, and Cu2+ from Aqueous Solutions Using Amino-Functionalized Cellulose Nanocrystal

In this work, the amino-functionalized cellulose nanocrystal (ACNC) was prepared using a green route and applied as a biosorbent for adsorption of Cr(VI), Pb²⁺, and Cu²⁺ from aqueous solutions. CNC was firstly oxidized by sodium periodate to yield the dialdehyde nanocellulose (DACNC). Then, DACNC reacted with diethylenetriamine (DETA) to obtain amino-functionalized nanocellulose (ACNC) through a Schiff base reaction. The properties of DACNC and ACNC were characterized by using elemental analysis, Fourier transform infrared spectroscopy (FT-IR), Kaiser test, atomic force microscopy (AFM), X-ray diffraction (XRD), and zeta potential measurement. The presence of free amino groups was evidenced by the FT-IR results and Kaiser test. ACNCs exhibited an amphoteric nature with isoelectric points between pH 8 and 9. After the chemical modification, the cellulose I polymorph of nanocellulose remained, while the crystallinity decreased. The adsorption behavior of ACNC was investigated for the removal of Cr(VI), Pb²⁺, and Cu²⁺ in aqueous solutions. The maximum adsorption capacities were obtained at pH 2 for Cr(VI) and pH 6 for Cu²⁺ and Pb²⁺, respectively. The adsorption all followed pseudo second-order kinetics and Sips adsorption isotherms. The estimated adsorption capacities for Cr(VI), Pb²⁺, and Cu²⁺ were 70.503, 54.115, and 49.600 mg/g, respectively.     

N,N-双(二硫代羧基)二乙烯三胺乙基聚合物的合成及其吸附性能

以二乙烯三胺与二硫化碳反应生成中间体[N,N-双(二硫代羧基)二乙烯三胺],进而与1,2-二氯乙烷聚合生成N,N-双(二硫代羧基)二乙烯三胺乙基聚合物,用红外光谱确认了中间体和聚合物的结构.测定了聚合物对一部分重金属离子的吸附性能.结果表明,聚合物能定量地吸附某些重金属离子,对Ag+、Cu2+等离子有较高的吸附容量.     

磁性功能化酚醛树脂的合成及对金属离子的吸附性能

磁性功能化酚醛树脂的合成及对金属离子的吸附性能;环氧酚醛树脂;螯合;金属离子;溶胀;吸附容量;吸附动力学     

Preparation of a Chitosan/Coal Gasification Slag Composite Membrane and Its Adsorption and Removal of Cr (VI) and RhB in Water

At present, there are many kinds of pollutants, including dyes and heavy metal ions, in wastewater. It is very important to develop adsorbents that can simultaneously remove heavy metal ions and dyes. In this study, a renewable composite membrane material was synthesized using chitosan and treated coal gasification slag. The Cr (VI) maximum adsorption capacity of the composite membrane was 50.0 mg/L, which was 4.3~8.8% higher than that of the chitosan membrane. For the adsorption of RhB, the removal rate of the chitosan membrane was only approximately 5.0%, but this value could be improved to 95.3% by introducing coal gasification slag. The specific surface area of the chitosan membrane could also be increased 16.2 times by the introduction of coal gasification slag. This is because coal gasification slag could open the nanopores of the chitosan membrane (from 80 μm to 110 μm). Based on the adsorption kinetics and adsorption mechanism analysis, it was found that the adsorption of Cr (VI) occurred mainly through the formation of coordination bonds with the amino groups on the molecular chains of chitosan. Meanwhile, RhB adsorption occurred through the formation of hydrogen bonds with the surface of coal gasification slag. Additionally, coal gasification slag can improve the mechanical properties of the chitosan membrane by 2.2 times, which may facilitate the practical application of the composite membrane. This study provides new insight into the adsorbent design and the resource utilization of coal gasification slag.     

Designing of Zn (II)-based novel coordination polymer (CP): Synthesis,characterization, and heavy metal removal from water

A new coordination polymer, Zn-(OC-AMAM-CO) CP, has been synthesized from Zn (II) as ionic node and 2,2′-((1,2-phenylenebis [azanediyl])bis (carbonyl))dibenzoic acid, (OC-AMAM-CO), as a new linker, where (OC-AMAM-CO) has been synthesized as an amide product through condensation reaction of phthalic acid and o-phenylenediamine. The amide product (OC-AMAM-CO) and Zn-(OC-AMAM-CO) CP were characterized via FTIR and PXRD analyses, and Zn-(OC-AMAM-CO) CP was further characterized via SEM/EDX and XPS analyses. Moreover, DFT study was performed to shed light on the both structures of (OC-AMAM-CO) and Zn-(OC-AMAM-CO). PXRD analysis revealed the successful syntheses of the new linker (OC-AMAM-CO) and Zn-(OC-AMAM-CO) CP where the new CP is crystalline. DFT study revealed that the 3D topological structure assembled through coordination, π–π stacking, and hydrogen bonding. Zn-(OC-AMAM-CO) CP was applied as an adsorbent for the removal of Cu (II) from water as it has abundant chelating groups that serve as adsorptive coordinating sites. Isotherm study revealed the obedience of Cu (II)/Zn-(OC-AMAM-CO) CP adsorption system to Langmuir modeling with adsorption capacity of about 55 mg/g. A kinetic study showed that the rate of adsorption was a pseudo-first-order type. Further, adsorption process was found to be strongly diffusion dependent.     

Hydrothermal leather waste by hydrothermal method for uranium (VI) removal from a Simulated Saline Solution

Hydrothermal leather waste was prepared by hydrothermal method, using leather waste as the precondition and applying the adsorption of uranium (VI) in solution. The effects of pH value, adsorption time and initial concentration of uranium (VI) on the adsorption efficiency were investigated. The adsorption process was in accordance with the pseudo‐second‐order kinetic model and Freundlich adsorption isotherm model. Kinetic and thermodynamic studies showed that the adsorption process was endothermic and spontaneous, and it reached adsorption equilibrium in 240 min. In the simulated high salinity environment, the adsorbent exhibited excellent adsorption rate on the trace of uranium (VI). The adsorbent was characterized by scanning electron microscopy, flourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy, and it was found that the adsorption mechanism was coordinated complex.     

Single-Step Hydrothermal Synthesis of Biochar from H3PO4-Activated Lettuce Waste for Efficient Adsorption of Cd(II) in Aqueous Solution

Developing an ideal and cheap adsorbent for adsorbing heavy metals from aqueous solution has been urgently need. In this study, a novel, effective and low-cost method was developed to prepare the biochar from lettuce waste with H₃PO₄ as an acidic activation agent at a low-temperature (circa 200 °C) hydrothermal carbonization process. A batch adsorption experiment demonstrated that the biochar reaches the adsorption equilibrium within 30 min, and the optimal adsorption capacity of Cd(II) is 195.8 mg∙g⁻¹ at solution pH 6.0, which is significantly improved from circa 20.5 mg∙g⁻¹ of the original biochar without activator. The fitting results of the prepared biochar adsorption data conform to the pseudo-second-order kinetic model (PSO) and the Sips isotherm model, and the Cd(II) adsorption is a spontaneous and exothermic process. The hypothetical adsorption mechanism is mainly composed of ion exchange, electrostatic attraction, and surface complexation. This work offers a novel and low-temperature strategy to produce cheap and promising carbon-based adsorbents from organic vegetation wastes for removing heavy metals in aquatic environment efficiently.     

电化学传感分析平台测定污水中的Cr(VI)

结合微型电化学仪器,研究了一种快速、便携、灵敏的Cr(VI)电化学传感分析平台,用于污水中Cr(VI)的检测。采用三电极体系,差分脉冲阴极溶出伏安法(DPCSV),记录伏安曲线中Cr(VI)的还原峰。Cr(VI)的溶出峰电流与其浓度在2～500 μmol L-1范围内有良好的线性关系,测得Cr(VI)的检测限为0.55 μmol L-1 (28.60 g L-1),达到了国际卫生组织（WHO）规定的饮用水中Cr(VI)的最高含量50 g L-1。测得镀铬厂废水中Cr(VI)含量为2.03 mol L-1,与国标法中光谱学分析法的结果基本一致。该法重现性好、灵敏度高,使其应用在现场实时监测环境中的Cr(VI)具有很大的潜力。     

Efficient Adsorption and Recovery of Pb(II) from Aqueous Solution by a Granular pH-Sensitive Chitosan-based Semi-IPN Hydrogel

A series of granular pH-sensitive semi-interpenetrating polymer network (semi-IPN) hydrogels based on chitosan (CTS), acrylic acid (AA) and gelatine (GE) were utilized for the adsorption and recycle of Pb(II) from aqueous solutions. The composite hydrogels have been characterized by FT-IR and TGA. The effects of contact time, pH value and initial Pb(II) concentration on the adsorption were investigated. Results indicated that the adsorption capacity of the hydrogel increased with increasing pH value and initial Pb(II) concentration, and a pH-sensitive adsorption characteristic was presented. The adsorption rate of the semi-IPN hydrogels on Pb(II) is fast with an adsorption rate constant of 14.9790 mg/(g·s), and adsorption equilibrium could be reached within 10 min. The adsorption isotherms of the hydrogels for Pb(II) could be described well by the Langmuir equation, rather than the Freundlich equation. The as-prepared hydrogels showed good reusability with 0.05 mol/l HNO₃ solutions as the desorbing agent and 0.1 mol/l NaOH solutions as the regeneration agent, respectively. After five consecutive adsorption-desorption processes, the semi-IPN hydrogel with 20 wt% GE may reach 85.26% of its initial adsorption capacity. In addition, the adsorbed Pb(II) can be quantitatively recovered by simply eluting the hydrogel with dilute HNO₃ solution, and a recovery ratio of 89.27% was reached for the semi-IPN hydrogel. The satisfactory adsorption amount is mainly derived from the chelating of functional groups (i.e. –COO^? and –NH₂) with Pb(II) ions. The hydrogel adsorbents exhibited excellent affinity for Pb(II), and can be applied to treat wastewater containing heavy metal ion and simultaneously recover the valuable metal sources.     

Adsorption and Kinetics Studies of Cr (VI) by Graphene Oxide and Reduced Graphene Oxide-Zinc Oxide Nanocomposite

In this work, graphene oxide (GO) and its reduced graphene oxide-zinc oxide nanocomposite (rGO-ZnO) was used for the removal of Cr (VI) from aqueous medium. By employing a variety of characterization techniques, morphological and structural properties of the adsorbents were determined. The adsorption study was done by varying concentration, temperature, pH, time, and amount of adsorbent. The results obtained confirmed that rGO-ZnO is a more economical and promising adsorbent for removing Cr (VI) as compared to GO. Kinetic study was also performed, which suggested that sorption of Cr (VI) follows the pseudo-first-order model. For equilibrium study, non-linear Langmuir was found a better fitted model than its linearized form. The maximum adsorption capacity calculated for GO and rGO-ZnO nanocomposite were 19.49 mg/g and 25.45 mg/g, respectively. Endothermic and spontaneous nature of adsorption was detected with positive values of ΔS (change in entropy), which reflects the structural changes happening at the liquid/solid interface.     

Tailoring Properties of Resol Resin-Derived Spherical Carbons for Adsorption of Phenol from Aqueous Solution

The polycondensation of resorcinol and formaldehyde in a water–ethanol mixture using the adapted Stöber method was used to obtain resol resins. An optimization of synthesis conditions and the use of an appropriate stabilizer (e.g., poly(vinyl alcohol)) resulted in spherical grains. The resins were carbonized in the temperature range of 600–1050 °C and then chemically activated in an aqueous HNO₃ solution, gaseous ammonia, or by an oxidation–reduction cycle (soaking in a HNO₃ solution followed by treatment with NH₃). The obtained carbons were characterized by XRD, the low-temperature adsorption of nitrogen, SEM, TGA, and XPS in order to determine degree of graphitization, porosity, shape and size of particles, and surface composition, respectively. Finally, the materials were tested in phenol adsorption. The pseudo-second order model perfectly described the adsorption kinetics. A clear correlation between the micropore volume and the adsorption capacity was found. The content of graphite domains also had a positive effect on the adsorption properties. On the other hand, the presence of heteroatoms, especially oxygen groups, resulted in the clogging of the pores and a decrease in the amount of adsorbed phenol.     

Adsorption of51Cr(VI) on manganese dioxide from aqueous solution

Sorption of⁵¹Cr(VI) by MnO₂ has been studied as a function of pH and ionic concentration in the presence of certain added cations and anions. The findings are explained in the light of deprotonation/hydroxyl ion association reaction on oxide surface and its subsequent interaction with the tracer. Infrared spectroscopy has shown the chemical interaction of Cr(VI) on the surface of MnO₂. The influence of certain interfering ions has been shown on the sorption of⁵¹Cr(VI) on MnO₂ surface. An attempt has been made to concentrate traces of⁵¹Cr under optimum experimental conditions. The experimental observation shows that the activity sorbed under specified conditions can be recovered appreciably by leaching the pre-adsorbed carrier.     

聚萘二胺的合成及其对重金属离子的高效反应吸附

聚萘二胺是继聚苯胺和聚吡咯之后的又一类新型导电高分子,因聚合物中含有活性 的自由胺基和亚胺基而具有新的多功能性.作者根据近期研究工作和国外最新文献,系统论述了聚1,8-、1,5-、2,3-萘二胺的化学氧化合成和电化学氧化合成及其对重金属离子的络合和还原吸附功能,详细比较了两种聚合方法的特点. 指出通过萘二胺的电化学氧化聚合可以方便地获得对重金属离子如Ag⁺、Pb²⁺、Hg²⁺、Cu²⁺、VO²⁺敏感的修饰电极,而通过化学 氧化聚合可以高产率地获得对Ag+具有极大的还原吸附容量的聚合物颗粒.聚萘二胺在痕量 金属离子的分析与探测、工业废水中贵金属离子的回收和重金属离子的清除等领域展现了广阔的应用前景.