Cyclopentadienyl Ruthenium(II) Complexes with Bridging Alkynylphosphine Ligands: Synthesis and Electrochemical Studies

The reaction of [CpRuCl(PPh₃)₂] (Cp=cyclopentadienyl) and [CpRuCl(dppe)] (dppe=Ph₂PCH₂CH₂PPh₂) with bis‐ and tris‐phosphine ligands 1,4‐(Ph₂PC≡C)₂C₆H₄ ( 1 ) and 1,3,5‐(Ph₂PC≡C)₃C₆H₃ ( 2 ), prepared by Ni‐catalysed cross‐coupling reactions between terminal alkynes and diphenylchlorophosphine, has been investigated. Using metal‐directed self‐assembly methodologies, two linear bimetallic complexes, [{CpRuCl(PPh₃)}₂(μ‐dppab)] ( 3 ) and [{CpRu(dppe)}₂(μ‐dppab)](PF₆)₂ ( 4 ), and the mononuclear complex [CpRuCl(PPh₃)(η¹‐dppab)] ( 6 ), which contains a “dangling arm” ligand, were prepared (dppab=1,4‐bis[(diphenylphosphino)ethynyl]benzene). Moreover, by using the triphosphine 1,3,5‐tris[(diphenylphosphino)ethynyl]benzene (tppab), the trimetallic [{CpRuCl(PPh₃)}₃(μ₃‐tppab)] ( 5 ) species was synthesised, which is the first example of a chiral‐at‐ruthenium complex containing three different stereogenic centres. Besides these open‐chain complexes, the neutral cyclic species [{CpRuCl(μ‐dppab)}₂] ( 7 ) was also obtained under different experimental conditions. The coordination chemistry of such systems towards supramolecular assemblies was tested by reaction of the bimetallic precursor 3 with additional equivalents of ligand 2 . Two rigid macrocycles based on cis coordination of dppab to [CpRu(PPh₃)] were obtained, that is, the dinuclear complex [{CpRu(PPh₃)(μ‐dppab)}₂](PF₆)₂ ( 8 ) and the tetranuclear square [{CpRu(PPh₃)(μ‐dppab)}₄](PF₆)₄ ( 9 ). The solid‐state structures of 7 and 8 have been determined by X‐ray diffraction analysis and show a different arrangement of the two parallel dppab ligands. All compounds were characterised by various methods including ESIMS, electrochemistry and by X‐band ESR spectroscopy in the case of the electrogenerated paramagnetic species.     

超声波诱导降解水溶液中甲胺磷

超声波降解;废水处理;超声波诱导降解水溶液中甲胺磷     

Evidence for Charge Delocalization in Diazafluorene Ligands Supporting Low-Valent [Cp*Rh] Complexes**

Ligands based upon the 4,5-diazafluorene core are an important class of emerging ligands in organometallic chemistry, but the structure and electronic properties of these ligands have received less attention than they deserve. Here, we show that 9,9′-dimethyl-4,5-diazafluorene (Me₂daf) can stabilize low-valent complexes through charge delocalization into its conjugated π-system. Using a new platform of [Cp*Rh] complexes with three accessible formal oxidation states (+III, +II, and +I), we show that the methylation in Me₂daf is protective, blocking Brønsted acid-base chemistry commonly encountered with other daf-based ligands. Electronic absorption spectroscopy and single-crystal X-ray diffraction analysis of a family of eleven new compounds, including the unusual Cp*Rh(Me₂daf), reveal features consistent with charge delocalization driven by π-backbonding into the LUMO of Me₂daf, reminiscent of behavior displayed by the workhorse 2,2′-bipyridyl ligand. Taken together with spectrochemical data demonstrating clean conversion between oxidation states, our findings show that 9,9′-dialkylated daf-type ligands are promising building blocks for applications in reductive chemistry and catalysis.     

Solar Driven Gas Phase Advanced Oxidation Processes for Methane Removal - Challenges and Perspectives

Methane (CH₄) is a potent greenhouse gas and the second highest contributor to global warming. CH₄ emissions are still growing at an alarmingly high pace. To limit global warming to 1.5 °C, one of the most effective strategies is to reduce rapidly the CH₄ emissions by developing large-scale methane removal methods. The purpose of this perspective paper is threefold. (1) To highlight the technology gap dealing with low concentration CH₄ (at many emission sources and in the atmosphere). (2) To analyze the challenges and prospects of solar-driven gas phase advanced oxidation processes for CH₄ removal. And (3) to propose some ideas, which may help to develop solar-driven gas phase advanced oxidation processes and make them deployable at a climate significant scale.     

Application of a Structure/Oxidation‐State Correlation to Complexes of Bridging Azo Ligands

Based on data from more than 40 crystal structures of metal complexes with azo‐based bridging ligands (2,2′‐azobispyridine, 2,2′‐azobis(5‐chloropyrimidine), azodicarbonyl derivatives), a correlation between the N? N bond lengths (d_NN) and the oxidation state of the ligand (neutral, neutral/back‐donating, radical‐anionic, dianionic) was derived. This correlation was applied to the analysis of four ruthenium compounds of 2,2′‐azobispyridine (abpy), that is, the new asymmetrical rac‐[(acac)₂Ru1(μ‐abpy)Ru2(bpy)₂](ClO₄)₂ ([ 1 ](ClO₄)₂), [Ru(acac)₂(abpy)] ( 2 ), [Ru(bpy)₂(abpy)](ClO₄)₂ ([ 3 ](ClO₄)₂), and meso‐[(bpy)₂Ru(μ‐abpy)Ru(bpy)₂](ClO₄)₃ ([ 4 ](ClO₄)₃; acac^?=2,4‐pentanedionato, bpy=2,2′‐bipyridine). In agreement with DFT calculations, both mononuclear species 2 and 3 ²⁺ can be described as ruthenium(II) complexes of unreduced abpy⁰, with 1.295(5)<d_NN<1.320(3) Å, thereby exhibiting effects from π back‐donation. However, the abpy ligand in both the asymmetrical diamagnetic compound 1 ²⁺ (d_NN=1.374(6) Å) and the symmetrical compound 4 ³⁺ (d_NN=1.360(7), 1.368(8) Å) must be formulated as abpy^.?. Remarkably, the addition of [Ru^II(bpy)₂]²⁺ to mononuclear [Ru^II(acac)₂(abpy⁰)] induces intracomplex electron‐transfer under participation of the noninnocent abpy bridge to yield rac‐[(acac)₂Ru1^III(μ‐abpy^.?)Ru2^II(bpy)₂]²⁺ ( 1 ²⁺) with strong antiferromagnetic coupling between abpy^.? and Ru^III (DFT (B3LYP/LANL2DZ/6‐31G*)‐calculated triplet–singlet energy separation E_S=1?E_S=0=11739 cm^?1). Stepwise one‐electron transfer was studied for compound 1 ⁿ, n=1?, 0, 1+, 2+, 3+, by UV/Vis/NIR spectroelectrochemistry, EPR spectroscopy, and by DFT calculations. Whereas the first oxidation of compound 1 ²⁺ was found to mainly involve the central ligand to produce an (abpy⁰)‐bridged Class I mixed‐valent Ru1^IIIRu2^II species, the first reduction of compound 1 ²⁺ affected both the bridge and Ru1 atom to form a radical complex ( 1 ⁺), with considerable metal participation in the spin‐distribution. Further reduction moves the spin towards the {Ru2(bpy)₂} entity.     

Thermal Decomposition of Purine Derivatives Used in Medicine

Thermal decomposition of several purine derivatives used in medicine –theophylline, theobromine, caffeine, diprophylline and aminophylline was investigated. The analyses were performed using a derivatograph. It has been established, that the thermal decomposition of purine derivatives occurs via three stages. The stages of dehydratation of hydrate and evaporation of aminophylline are distinctly marked on the thermoanalytical curves, which may be used for the control of composition of the studied compounds. The ranges of temperature, in which the analyzed compounds can be technologically transformed without change of their physicochemical properties, were also established. Moreover, the influence of heating rate and sample size on the thermal decomposition of the examined compounds was evaluated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Crystalline Phase and Decomposition Dynamics of Aluminum Titanate at Different Temperature

The crystalline phase formed during aluminum titanate at 750-1300 ℃ as well as the relationship between its content change and decomposition dynamics was mainly discussed in this paper.Dynamical equation was established for calculating the reaction activation energy.It aimed at providing dynamics basic data for taking up necessary measures to inhibit the decomposition of aluminum titanate.Experimental results showed that aluminum titanate would decompose into TiO2 and corundum at 750-1300 ℃.Content of aluminum titanate would reduce with the increase of decomposition time,and the order of decomposition rates at different temperature was 1100 > 1200 > 1000 > 900 ℃.The decomposition was a chemical reaction with control steps,and could meet the first order reaction dynamic equation-F(G) = [(1-G)-2/3-1] = Kt.According to the calculation,rate constants of different decomposition reaction dynamic equations were K900 = 2.2×10-3,K1000 = 1.2×10-2,K1100 = 4×10-1 and K1200 = 1.5×10-1,and the reaction activation energy ΔGave = 203.21 KJ/mol.     

Switching from Metal- to Ligand-Based Oxidation in Cobalt Complexes with Redox-Active Bisguanidine Ligands

The control of the redox reactivity, magnetic and optical properties of the different redox states of complexes with redox-active ligands permits their rational use in catalysis and materials science. The redox-chemistry of octahedrally coordinated high-spin Co^II complexes (three unpaired electrons) with one redox-active bisguanidine ligand and two acetylacetonato (acac) co-ligands is completely changed by replacing the acac by hexafluoro-acetylacetonato (hfacac) co-ligands. The first one-electron oxidation is metal-centered in the case of the complexes with acac co-ligands, giving diamagnetic Co^III complexes. By contrast, in the case of the less Lewis-basic hfacac co-ligands, the first one-electron oxidation becomes ligand-centered, leading to high-spin Co^II complexes with a radical monocationic guanidine ligand unit (four unpaired electrons). Ferromagnetic coupling between the spins on the metal and the organic radical in solution is evidenced by temperature-dependent paramagnetic NMR studies, allowing to estimate the isotropic exchange coupling constant in solution. Second one-electron oxidation leads to high-spin Co^II complexes with dicationic guanidine ligand units (three unpaired electrons) in the presence of hfacac co-ligands, but to low-spin Co^III complexes with radical monocationic, peralkylated guanidine ligand (one unpaired electron) in the presence of acac co-ligands. The analysis of the electronic structures is complemented by quantum-chemical calculations on the spin density distributions and relative energies of the possible redox isomers.     

Reactions of 7,8‐Dithiabicyclo[4.2.1]nona‐2,4‐diene 7‐exo‐Oxide with Dodecacarbonyl Triiron Fe3(CO)12: A Novel Type of Sulfenato Thiolato Diiron Hexacarbonyl Complexes

The reaction of Fe₃(CO)₁₂ ( 13 ) with 7,8‐dithiabicyclo[4.2.1]nona‐2,4‐diene 7‐exo‐oxide ( 12 ) yields the sulfenato‐thiolato complex 14 , which is used as starting material for further reactions. The disulfenato complex 17 is obtained by using one equivalent of dimethyldioxirane (DMD), and the monoepoxide 18 is prepared by the oxidation of 14 with an excess of DMD. Complex 14 can be converted to the monophosphine complexes 19a and 19b by subsequent substitution of one CO ligand using trimethylaminoxide Me₃NO and triphenylphosphine PPh₃. Additional substitution reactions are done with 17 by using acetonitrile as a ligand to form 20a and 20b . In the electrochemical part of the paper, the reactions of the reduced iron species 14 , 15 , 17 , and 19a are studied.     

Hydrogen Bonding Enhances the Electrochemical Hydrogenation of Benzaldehyde in the Aqueous Phase

The hydrogenation of benzaldehyde to benzyl alcohol on carbon‐supported metals in water, enabled by an external potential, is markedly promoted by polarization of the functional groups. The presence of polar co‐adsorbates, such as substituted phenols, enhances the hydrogenation rate of the aldehyde by two effects, that is, polarizing the carbonyl group and increasing the probability of forming a transition state for H addition. These two effects enable a hydrogenation route, in which phenol acts as a conduit for proton addition, with a higher rate than the direct proton transfer from hydronium ions. The fast hydrogenation enabled by the presence of phenol and applied potential overcompensates for the decrease in coverage of benzaldehyde caused by competitive adsorption. A higher acid strength of the co‐adsorbate increases the intensity of interactions and the rates of selective carbonyl reduction.     

Synthesis and Catalytic Water Oxidation Activities of Ruthenium Complexes Containing Neutral Ligands

Two dinuclear and one mononuclear ruthenium complexes containing neutral polypyridyl ligands have been synthesised as pre‐water oxidation catalysts and characterised by ¹H and ¹³C NMR spectroscopy and ESI‐MS. Their catalytic water oxidation properties in the presence of [Ce(NH₄)₂(NO₃)₆] (Ce^IV) as oxidant at pH 1.0 have been investigated. At low concentrations of Ce^IV (5 mM ), high turnover numbers of up to 4500 have been achieved. An ¹⁸O‐labelling experiment established that both O atoms in the evolved O₂ originate from water. Combined electrochemical study and electrospray ionisation mass spectrometric analysis suggest that ligand exchange between coordinated 4‐picoline and free water produces Ru aquo species as the real water oxidation catalysts.     

Comparison Studies on Several Ligands Used in Determination of Cd(II) in Rice by Flame Atomic Absorption Spectrometry after Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction

Ligands plays an important role in the extraction procedures for the determination of cadmium in rice samples by using flame atomic absorption spectrometry (FAAS). In the present study, comparative evaluation of 10 commercially available ligands for formation of Cd(II)-ligand complex and determination of cadmium in rice samples by ultrasound-assisted dispersive liquid–liquid microextraction (UADLLME) combined with FAAS was developed. Sodium diethyldithiocarbamate (DDTC) provided a high distribution coefficient as well as a good absorbance signal, therefore DDTC was used as a ligand in UADLLME. A low density and less toxic solvent, 1-heptanol, was used as the extraction solvent and ethanol was used as the disperser solvent. In addition, the experimental conditions of UADLLME were optimized in standard solution first and then applied in rice, such as the type and volume of extractant and dispersant, pH, extraction time, and temperature. Under the optimal experimental conditions, the detection limit (3σ) was 0.69 μg/L for Cd(II). The proposed method was applied for the determination of Cd(II) in three different rice samples (polished rice, brown rice, and glutinous rice), the recovery test was carried out, and the results ranged between 96.7 to 113.6%. The proposed method has the advantages of simplicity, low cost, and accurate and was successfully applied to analyze Cd(II) in rice.     

MgO催化剂上甲醇分解反应机理的研究

自Greenler等用IR光谱研究了甲醇在氧化铝上的分解反应后,对各种氧化物表面上甲醇的吸附及反应的IR光谱、TPD及NMR研究已有较多报道.田丸等研究了酸性氧化铬表面上甲醇分解反应机理,认为甲醇首先形成甲氧基吸附态,然后变成甲酸根吸附态,再进一步分解为H_2、CO、H_2O及CO_2,并认为稳定的吸附态甲酸根离子在甲醇气氛下更易于分解为产物.本文对碱性MgO表面上甲醇分解反应机理进行了探讨.     

Oxidation of Benzene in the Aqueous Phase Over a Bimetallic Carbon Supported Catalyst

Aqueous phase heterogeneous catalytic oxidation of benzene by dissolved oxygen is reported. Using a bimetallic platinum-ruthenium catalyst supported on a high surface area activated carbon, good conversions were obtained at temperatures above 100°C and space-times greater than 40 seconds. Complete conversion of benzene to carbon dioxide and water was achieved at 100°C with a reactor space-time of 300 s.     

Investigation on the Coordination Mode of IL-Supported Diols Used as Phosphine-Free Ligands for Palladium Catalyzed Heck Reaction

The coordination mode of IL-supported diols used as phosphine-free ligands for palladium catalyzed Heck reaction has been investigated by tuning their compositions. The difference in coordination of these IL-supported diols with metal Pd in Heck reaction was related to the changes of the cation rings, leading to the different activities of Pd catalyst in the reaction. The experimental results indicated that the activities of Pd catalyst were affected mainly by n-electron density of the cation rings. Compared to pyridinium and piperidinium cations, imidazolium cations showed the best coordination to metal Pd. In the meantime, C-2 hydrogen and the length of alkyl side chains had impacts on the coordination as well.     

烟碱型乙酰胆碱受体吡啶基胺类配体的构效关系研究

采用分子动力学模拟退火技术寻找了一类新型烟碱型乙酰胆碱受体吡啶基胺类配体分子的优势构象，用分子力学方法进行了结构优化，再用半经验量子化学方法中的AM1方法进一步优化，并做了电子结构计算.用计算所得物化参数对配体亲和性进行多元线性回归分析，回归结果表明：化合物pKi值与分子最低空轨道能量(ELUMO)、吡啶基所带总电荷(Qp)及分子构象相关.根据计算结果对该类化合物与受体的作用机制和作用位点进行了讨论.     

Soft,Oxidative Stripping of Alkyl Thiolate Ligands from Hydroxyapatite‐Supported Gold Nanoclusters for Oxidation Reactions

A strategy for the mild deprotection of alkyl‐thiolated (6‐mercaptohexanoic acid, MHA, and 3‐mercaptopropanoic acid, MPA) gold nanoclusters (Au NCs) supported on hydroxyapatite (HAP) has been developed by employing a peroxide (tert‐butyl hydroperoxide, TBHP, or hydrogen peroxide, H₂O₂) as an oxidant. The thiol ligands on the supported Au NCs were removed after oxidation, and the size and integrity of the supported clusters were well‐preserved. The bare gold clusters on HAP after removal of the ligands were catalytically effective for the epoxidation of styrene and the aerobic oxidation of benzyl alcohol. These two reactions were also investigated on calcined Au NCs that were supported on HAP for comparison, and the resulting Au NCs that were prepared by using this new strategy showed superior catalytic activity.     

Thermal Decomposition Studies of Organoplatinum Films

 This study examines the thermal decomposition of 1,5-cyclooctadiene platinum (II) chloride organometallic films, deposited by thermal evaporation. The thin film samples were annealed both in air and hydrogen with well-controlled temperature regimes. After annealing, the decomposed thin films were examined by AFM and STM scanning probe, XPS and TEM microbeam analytical techniques. The experimental results confirm that the thermal decomposition products on silicon substrates are composed predominantly of metallic platinum. Annealing in hydrogen can reduce substantially the decomposition temperature of the material from around 250 to 160 °C but the surface morphology of the decomposed films is significantly different to those annealed in air. The metallic nature of the thermally decomposed films was confirmed by bonding configuration recognition, electronic property probing and microstructure analysis.