Effect of Extraction Procedures with Ultrasound and Cellulolytic Enzymes on the Structural and Functional Properties of Citrus grandis Osbeck Seed Mucilage

The structural and functional properties of Citrus grandis Osbeck (CGO) seed mucilage by different extraction practices, including conventional citrate buffer, ultrasonic-assisted (UAE), enzymatic-assisted extraction (EAE) with cellulase or Celluclast^® 1.5 L and various ultrasonic-assisted enzymatic extraction (UAEE) procedures were investigated. It was found that CGO seed from agricultural and processing byproducts is an excellent new source of high methoxyl pectin with quite high intrinsic viscosity (about 108.64 dL/g) and molecular weight (about 1.9 × 10⁶) as compared with other pectin sources. UAEE with Celluclast^® 1.5 L enhanced the extraction yield most pronouncedly (about 2.3 times). Moreover, the monosaccharide composition of CGO seed mucilage is least affected by EAE with Celluclast^® 1.5 L. In contrast, EAE with cellulase dramatically reduces the galacturonic acid (GalA) content to less than 60 molar%, and increases the glucose (Glc) content pronouncedly (to about 40 molar%), which may be considered as an adverse effect in terms of pectin purity. Though extraction procedures involved with ultrasound and cellulolytic enzymes generally show a decrease in GalA contents, weight average molar mass and intrinsic viscosity, EAE with Celluclast^® 1.5 L is least affected, followed by UAE and UAEE with Celluclast^® 1.5 L. These features can be leveraged in favor of diversified applications.     

Effect of Ultrasound-Assisted,Microwave-Assisted and Ultrasound-Microwave-Assisted Extraction on Pectin Extraction from Industrial Tomato Waste

This work aimed to study the effect of ultrasound-assisted (UAE), microwave-assisted (MAE), and ultrasound-microwave-assisted (UMAE) methods for pectin extraction from industrial tomato waste. The overall performance index from the fuzzy analytical method with three criteria, pectin yield, galacturonic acid, and lycopene content, was applied to evaluate the best extraction conditions by using the weight of 75, 20, and 5, respectively. The UAE conditions was performed at a temperature of 80 °C for 20 min with the variations in the extraction pH and the solid liquid (SL) ratio. The best UAE conditions with high pectin yield, and high total carboxyl group, as well as a lycopene content, was the pH of 1.5 and the SL ratio of 1:30. The MAE conditions was performed with variations in the microwave powers and times. The results showed that the best MAE conditions were 300 W for 10 min, which gave high pectin yield with high galacturonic acid and lycopene content. Various conditions of UMAE at the best conditions of MAE and UAE were performed and exhibited that the UAE had more positively affected the pectin yield. However, the FTIR spectra of obtained pectins from different extraction techniques showed a similar pectin structure.     

Physicochemical,Thermal and Rheological Properties of Pectin Extracted from Sugar Beet Pulp Using Subcritical Water Extraction Process

The objective of this study was to characterize the properties of pectin extracted from sugar beet pulp using subcritical water (SWE) as compared to conventional extraction (CE). The research involved advanced modeling using response surface methodology and optimization of operational parameters. The optimal conditions for maximum yield of pectin for SWE and CE methods were determined by the central composite design. The optimum conditions of CE were the temperature of 90 °C, time of 240 min, pH of 1, and pectin recovery yield of 20.8%. The optimal SWE conditions were liquid-to-solid (L/S) ratio of 30% (v/w) at temperature of 130 °C for 20 min, which resulted in a comparable yield of 20.7%. The effect of obtained pectins on viscoamylograph pasting and DSC thermal parameters of corn starch was evaluated. The contents of galacturonic acid, degree of methylation, acetylation, and ferulic acid content were higher in the pectin extracted by SWE, while the molecular weight was lower. Similar chemical groups were characterized by FTIR in both SWE and CE pectins. Color attributes of both pectins were similar. Solutions of pectins at lower concentrations displayed nearly Newtonian behavior. The addition of both pectins to corn starch decreased pasting and DSC gelatinization parameters, but increased ΔH. The results offered a promising scalable approach to convert the beet waste to pectin as a value-added product using SWE with improved pectin properties.     

In-Vitro Screenings for Biological and Antioxidant Activities of Water Extract from Theobroma cacao L. Pod Husk: Potential Utilization in Foods

Increasing production of cocoa (Theobroma cacao L.) leads to a higher environmental burden due to its solid waste generation. Cocoa pod husk, one of the major solid wastes of cocoa production, contains rich bioactive compounds unveiling its valorization potential. With that in mind, our research aimed to explore the biological and antioxidant activities of aqueous extracts from cocoa pod husks. In this present work, cocoa pod husk was extracted using water and subsequentially partitioned using n-hexane, ethyl acetate, and methanol. The antimicrobial investigation revealed that the ethyl acetate solubles were active against the Staphylococcus aureus, Escherichia coli, and Candida albicans, where at a 20% w/v concentration, the inhibition diameters were 6.62 ± 0.10, 6.52 ± 0.02, and 11.72 ± 0.36 mm, respectively. The extracts were found non-toxic proven by brine shrimp lethality tests against Artemia salina with LC₅₀ scores ranging from 74.1 to 19,054.6 μg/mL. The total phenolic content and total flavonoid content were obtained in the range of 47.44 to 570.44 mg/g GAE and 1.96 to 4.34 mg/g QE, respectively. Antioxidant activities of the obtained extracts were revealed by 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) assay with EC₅₀ reached as low as 9.61 μg/mL by the ethyl acetate soluble. Phytochemical screening based on gas chromatography—mass spectroscopy analysis on the sample with the highest antioxidant activities revealed the dominant presence of three phytosterols, namely gamma-sitosterol, stigmasterol, and campesterol.     

Isolation,Chemical Characterization and Antioxidant Activity of Pectic Polysaccharides of Fireweed (Epilobium angustifolium L.)

The aim of this study was to isolate pectins with antioxidant activity from the leaves of Epilobium angustifolium L. Two pectins, EA-4.0 and EA-0.8, with galacturonic acid contents of 88 and 91% were isolated from the leaves of E. angustifolium L. by the treatment of plant raw materials with aqueous hydrochloric acid at pH 4.0 and 0.8, respectively. EA-4.0 and EA-0.8 were found to scavenge the DPPH radical in a concentration-dependent manner at 17–133 μg/mL, whereas commercial apple pectin scavenged at 0.5–2 mg/mL. The antioxidant activity of EA-4.0 was the highest and exceeded the activity of EA-0.8 and a commercial apple pectin by 2 and 39 times (IC₅₀—0.050, 0.109 and 1.961 mg/mL), respectively. Pectins EA-4.0 and EA-0.8 were found to possess superoxide radical scavenging activity, with IC₅₀s equal to 0.27 and 0.97 mg/mL, respectively. Correlation analysis of the composition and activity of 32 polysaccharide fractions obtained by enzyme hydrolysis and anionic exchange chromatography revealed that the antioxidant capacity of fireweed pectins is mainly due to phenolics and is partially associated with xylogalacturonan chains. The data obtained demonstrate that pectic polysaccharides appeared to be bioactive components of fireweed leaves with high antioxidant activity, which depend on pH at their extraction.     

Emulsifying properties and functional compositions of sugar beet pectins extracted under different conditions

Extraction conditions have important effects on the characteristics of sugar beet pectin (SBP). Response surface methodology (RSM) was used to study the impact of different extraction parameters on pectin yield, protein, ferulic acid, and galacturonic acid contents as well as on the emulsifying properties. Results indicated that pH was the main factor influencing pectin yield (ranging from 6.7 to 24.6%). Protein content varied from 0.5 to 6%, while ferulic acid content (ranging from 1.55 to 2.42%) was slightly influenced by the extraction conditions. Droplet sizes of the emulsions stabilized by different SBPs varied from 1.12 to 4.12 µm. Furthermore, according to the correlation analysis, protein content–pectin yield and ferulic acid–pectin yield demonstrated good correlations, respectively. Based on the present study, SBP with different functional components could be extracted as per relevant practical objectives.     

Ochratoxin A and 2′R-Ochratoxin A in Selected Foodstuffs and Dietary Risk Assessment

The aim of this study was to estimate the contamination of grain coffee, roasted coffee, instant coffee, and cocoa purchased in local markets with ochratoxin A (OTA) and its isomerization product 2′R-ochratoxin A (2′R-OTA), and to assess risk of dietary exposure to the mycotoxins. OTA and 2′R-OTA content was determined using the HPLC chromatography with immunoaffinity columns dedicated to OTA. OTA levels found in all the tested samples were below the maximum limits specified in the European Commission Regulation EC 1881/2006. Average OTA concentrations calculated for positive samples of grain coffee/roasted coffee/instant coffee/cocoa were 0.94/0.79/3.00/0.95 µg/kg, with the concentration ranges: 0.57–1.97/0.44–2.29/0.40–5.15/0.48–1.97 µg/kg, respectively. Average 2′R-OTA concentrations calculated for positive samples of roasted coffee/instant coffee were 0.90/1.48 µg/kg, with concentration ranges: 0.40–1.26/1.00–2.12 µg/kg, respectively. In turn, diastereomer was not found in any of the tested cocoa samples. Daily intake of both mycotoxins with coffee/cocoa would be below the TDI value even if the consumed coffee/cocoa were contaminated with OTA/2′R-OTA at the highest levels found in this study. Up to now only a few papers on both OTA and 2′R-OTA in roasted food products are available in the literature, and this is the first study in Poland.     

Supercritical carbon dioxide extraction of Usnea longissima (L.) Ach.: Optimization by Box-Behnken design (BBD)

Usnic acid (UA) was extracted from Usnea longissima (L.) Ach. in supercritical carbon dioxide (SC-CO₂) medium. The selected process parameters were extraction temperature (35–45 °C), amount of co-solvent (0%–5%) and extraction time (5–9 h). These parameters were applied to Box-Behnken design (BBD) belonging to response surface methodology (RSM) to determine optimum process parameters for the highest amount of UA in the extract. g UA/100g lichen, extraction yield % and UA content values were calculated in the range of 0.045–0.317, 2.77–5.4 and 71%–82% in different experimental conditions, respectively. The optimum conditions were predicted as 42 °C, 4.3% (ethanol) and 7.48 h. It was determined that the predicted and experimental values of g UA/100g lichen were compatible, and the suggested model was valid.     

Polysaccharides ofEremurus. XXI. Pectin substances of the leaves ofEremurus regelii

The pectin substances have been isolated fromEremurus regelii Vved., their qualitative and quantitative monosaccharide compositions have been determined, and their physicochemical properties have been studied. The partial hydrolysis of the pectin gave a galacturonan. On the basis of the results of periodate-nitric acid oxidation, enzymatic hydrolysis, and methylation it has been shown that in the galacturoman the galacturonic acid residues are linked by -(1 4)-glycosidic bonds.Deceased.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 172–174, March–April, 1985.     

Extraction of Pectin from Satsuma Mandarin Peel: A Comparison of High Hydrostatic Pressure and Conventional Extractions in Different Acids

Satsuma mandarin peel pectin was extracted by high hydrostatic pressure-assisted citric acid (HHPCP) or hydrochloric acid (HHPHP), and the physiochemical, structural, rheological and emulsifying characteristics were compared to those from conventional citric acid (CCP) and hydrochloric acid (CHP). Results showed that HHP and citric acid could both increase the pectin yield, and HHPCP had the highest yield (18.99%). Structural characterization, including NMR and FTIR, demonstrated that HHPHP showed higher Mw than the other pectins. The viscosity of the pectin treated with HHP was higher than that obtained with the conventional method, with HHPHP exhibiting significantly higher viscosity. Interestingly, all the pectin emulsions showed small particle mean diameters (D_4,3 being 0.2–1.3 μm) and extremely good emulsifying stability with centrifugation and 30-day storage assays, all being 100%. Satsuma mandarin peel could become a highly promising pectin source with good emulsifying properties, and HHP-assisted acid could be a more efficient method for pectin extraction.     

Box–Behnken Design (BBD)-Based Optimization of Microwave-Assisted Extraction of Parthenolide from the Stems of Tarconanthus camphoratus and Cytotoxic Analysis

Parthenolide, a strong cytotoxic compound found in different parts of Tarchonanthus camphoratus which motivated the authors to develop an optimized microwave-assisted extraction (MEA) method using Box–Behnken design (BBD) for efficient extraction of parthenolide from the stem of T. camphoratus and its validation by high-performance thin-layer chromatography (HPTLC) and cytotoxic analysis. The optimized parameters for microwave extraction were determined as: 51.5 °C extraction temperature, 50.8 min extraction time, and 211 W microwave power. A quadratic polynomial model was found the most suitable model with R² of 0.9989 and coefficient of variation (CV) of 0.2898%. The high values of adjusted R² (0.9974), predicted R² (0.9945), and signal-to-noise ratio (74.23) indicated a good correlation and adequate signal, respectively. HPTLC analyzed the parthenolide (R_f = 0.16) content in T. camphoratus methanol extract (TCME) at λ_max = 575 nm and found it as 0.9273% ± 0.0487% w/w, which was a higher than expected yield (0.9157% w/w). The TCME exhibited good cytotoxicity against HepG2 and MCF-7 cell lines (IC₅₀ = 30.87 and 35.41 µg/mL, respectively), which further supported our findings of high parthenolide content in TCME. This optimized MAE method can be further applied to efficiently extract parthenolide from marketed herbal supplements containing different Tarconanthus species.     

Comparative Assessment of Phytochemical Compounds and Antioxidant Properties of Kernel Oil from Eight Sour Cherry (Prunus cerasus L.) Cultivars

New plant oils as a potential natural source of nutraceutical compounds are still being sought. The main components of eight cultivars (‘Koral’, ‘Lucyna’, ‘Montmorency’, ‘Naumburger’, ‘Wanda’, ‘Wigor’, ‘Wołyńska’, and ‘Wróble’) of sour cherry (Prunus cerasus L.) grown in Poland, including crude fat, protein, and oil content, were evaluated. The extracted oils were analysed for chemical and biological activity. The oils had an average peroxide value of 1.49 mEq O₂/kg, acid value of 1.20 mg KOH/g, a saponification value of 184 mg of KOH/g, and iodine value of 120 g I₂/100 g of oil. The sour cherry oil contained linoleic (39.1–46.2%) and oleic (25.4–41.0%) acids as the major components with smaller concentrations of α-eleostearic acid (8.00–15.62%), palmitic acid (5.45–7.41%), and stearic acid (2.49–3.17%). The content of sterols and squalene varied significantly in all the studied cultivars and ranged between 336–973 mg/100 g and 66–102 mg/100 g of oil. The contents of total tocochromanols, polyphenols, and carotenoids were 119–164, 19.6–29.5, and 0.56–1.61 mg/100 g oil, respectively. The cultivar providing the highest amounts of oil and characterised by the highest content of PUFA (including linoleic acid), plant sterols, α-and β-tocopherol, as well as the highest total polyphenol and total carotenoids content was been found to be ‘Naumburger’. The antioxidant capacity of sour cherry kernel oils, measured using the DPPH^• and ABTS^•+ methods, ranged from 57.7 to 63.5 and from 38.2 to 43.2 mg trolox/100 g oil, respectively. The results of the present study provide important information about potential possibilities of application of Prunus cerasus kernel oils in cosmetic products and pharmaceuticals offering health benefits.     

Dispersive liquid-liquid microextraction for the isolation and HPLC-DAD determination of three major capsaicinoids in Capsicum annuum L.

Dispersive liquid-liquid microextraction (DLLME) was combined with high-performance liquid chromatography-diode-array detector (HPLC-DAD) for the extraction and quantitation of three major capsaicinoids (i.e. capsaicin, dihydrocapsaicin and nordihydrocapsaicin) from pepper (Capsicum annuum L.). Chloroform (extraction solvent, 100 μL), acetonitrile (disperser solvent, 1250 μL) and 30 s extraction time were found optimum. The analytes were back-extracted into 300 μL of 50 mM sodium hydroxide/ methanol, 45/55% (v/v), within 15 s before being injected into the instrument. Enrichment factors ranged from 3.3 to 14.7 and limits of detection from 5.0 to 15.0 µg g^-1. Coefficients of determination (R²) and %RSD were higher than 0.9962 and lower than 7.5%, respectively. The proposed method was efficiently applied for the extraction and quantitation of the three capsaicinoids in six cultivars of Capsicum annuum L. with percentage relative recoveries in the range of 92.0%–108.0%. DLLME was also scaled up for the isolation of the three major capsaicinoids providing purity greater than 98.0% as confirmed by liquid chromatography-mass spectrometry (LC-MS) and nuclear magnetic resonance (NMR) analysis, which significantly reduced the extraction time and organic solvent consumption.     

Optimization of Extraction Process and the Antioxidant Activity of Phenolics from Sanghuangporus baumii

Sanghuangporus baumii, is a widely used medicinal fungus. The polyphenols extracted from this fungus exert antioxidant, anti-inflammatory, and hypoglycemic effects. In this study, polyphenols from the fruiting bodies of S. baumii were obtained using the deep eutectic solvent (DES) extraction method. The factors affecting the extraction yield were investigated at different conditions. Based on the results from single-factor experiments, response surface methodology was used to optimize the extraction conditions. The scavenging ability of the polyphenols on •OH, DPPH, and ABTS⁺ was determined. The results showed that the DES system composed of choline chloride and malic acid had the best extraction yield (6.37 mg/g). The optimal extraction parameters for response surface methodology were as follows: 42 min, 58 ℃, 1:34 solid–liquid (mg/mL), and water content of 39%. Under these conditions, the yield of polyphenols was the highest (12.58 mg/g). At 0.30 mg/mL, the scavenging ability of the polyphenols on •OH, DPPH, and ABTS⁺ was 95.71%, 91.08%, and 85.52%, respectively. Thus, the method using DES was more effective than the conventional method of extracting phenolic compounds from the fruiting bodies of S. baumii. Moreover, the extracted polyphenols exhibited potent antioxidant activity.     

QTOF-ESI MS Characterization and Antioxidant Activity of Physalis peruviana L. (Cape Gooseberry) Husks and Fruits from Costa Rica

There is increasing interest in research of secondary metabolites from Physalis peruviana (Cape gooseberry) because of their potential bioactivities. In this study, the profile of compounds found in fruits and husks from Costa Rica was determined through ultra-performance liquid chromatography coupled with high-resolution mass spectrometry using a quadrupole time-of-flight analyzer (UPLC-ESI-QTOF MS) on extracts (n = 10) obtained through pressurized liquid extraction (PLE) conditions. In total, 66 different compounds were identified, comprising 34 withanolides, 23 sucrose ester derivatives and 9 flavonoids. UPLC-DAD analysis was performed to determine the β-carotene in fruits and to quantify the flavonoids in all 10 samples, with the results showing higher contents in samples from the Dota region (58.6–60.1 μg/g of dry material versus 1.6–2.8 mg/g of dry material). The Folin–Ciocalteau total polyphenolic content (FC) and antioxidant activity using the DPPH method showed better results for the husk extracts, with the ones from the Dota region holding the best values (4.3–5.1 mg GAE/g of dry material versus IC₅₀ = 1.6–2.3 mg of dry material/mL). In addition, a significant negative correlation was found between the RU, FC and DPPH values (r = −0.902, p < 0.05), aligning with previous reports on the role of polyphenols in antioxidant activity. Principal correlation analysis (PCoA) and hierarchical clustering (HC) analysis were performed on HRMS results, and they indicated that the D1 and D2 fruit samples from the Dota region were clustered with husks related to a higher presence of the analyzed metabolites. In turn, principal component analysis (PCA) performed on the flavonoid content and antioxidant activity yielded results indicating that the D1 and D2 husks and fruit samples from the Dota region stood out significantly, showing the highest antioxidant activity. In summation, our findings suggest that P. peruviana husks and fruits from Costa Rica constitute a substrate of interest for further studies on their potential health benefits.     

Potential of visible-near infrared spectroscopy combined with chemometrics for analysis of some constituents of coffee and banana residues

Banana (stalk, leaf, rhizome, rachis and stem) and coffee (leaf and husks) residues are promising feedstock for fuel and chemical production. In this work we show the potential of near-infrared spectroscopy (NIR) and multivariate analysis to replace reference methods in the characterization of some constituents of coffee and banana residues. The evaluated parameters were Klason lignin (KL), acid soluble lignin (ASL), total lignin (TL), extractives, moisture, ash and acid insoluble residue (AIR) contents of 104 banana residues (B) and102 coffee (C) residues from Brazil. PLS models were built for banana (B), coffee (C) and pooled samples (B + C). The precision of NIR methodology was better (p < 0.05) than the reference method for almost all the parameters, being worse for moisture. With the exception of ash (B and C) and ASL (C) content, which was predicted poorly (R² < 0.80), the models for all the analytes exhibited R² > 0.80. The range error ratios varied from 4.5 to 16.0. Based on the results of external validation, the statistical tests and figures of merit, NIR spectroscopy proved to be useful for chemical prediction of banana and coffee residues and can be used as a faster and more economical alternative to the standard methodologies.     

Use of modified rice husks as a natural solid adsorbent of trace metals: characterisation and development of an on-line preconcentration system for cadmium and lead determination by FAAS

The use of rice husks as an alternative adsorbent in an on-line preconcentration system for Cd (II) and Pb (II) determination by flame atomic absorption spectrometry (FAAS) is described. The potential of rice husks as a natural adsorbent was evaluated as a material modified with 0.75 mol l⁻¹ NaOH solution and in the unmodified form. For this task, several techniques such as spectroscopy and thermogravimetry were used for elucidation of possible functional groups responsible for the uptake of Cd (II) and Pb (II). Furthermore, based on adsorption studies and adsorption isotherms applied to the Langmüir model, it was possible to verify that modified rice husks present a higher adsorption capacity for both metals. After establishing this material as a promising natural adsorbent, it was used for on-line preconcentration of Cd (II) and Pb (II) metals. The multivariate optimisation of chemical and flow variables was performed by using a full factorial design (2⁴) including the following factors: preconcentration time, preconcentration flow rate, concentration and volume of eluent. The optimum pH values used for on-line preconcentration were taken from prior univariate experiments. Under optimised conditions for Cd (II) determination (4 min of preconcentration at a 6 ml min⁻¹ preconcentration flow rate, in which comprises 24 ml of preconcentration volume, 200 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent), the system achieved a detection limit of 1.14 μg l⁻¹ and an enrichment factor of 72.4. Similar conditions were used for Pb (II) determination (4 min of preconcentration, 6 ml min⁻¹ preconcentration flow rate, 300 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent) from which a detection limit of 14.1 μg l⁻¹ and enrichment factor of 46.0 were achieved. Also, rice husks have been shown to be a homogeneous and stable adsorbent in which more than 100 preconcentration/elution cycles provide a relative standard deviation (RSD) of less than 6.0% on the analytical signal. The satisfactory accuracy of the method developed was obtained by using spiked water samples (mineral water and lake water) and spiked red wine samples. These values were confirmed by electrothermal atomic absorption spectrometry (ETAAS). The certified reference material [pig kidney (CRM 186)] and the reference material [beech leaves (CRM 100)] were also used.     

Chemical investigation of the polysaccharides of the leaves ofPlantago major L.

Summary 1. A polysaccharide has been isolated from the leaves ofPlantage major L. and its monosaccharide composition has been studied.2. It has been established that the polysaccharide investigated contains D-galacturonic acid, D-galactose, D-glucose, D-xylose, L-rhamnose, L-arabinose, a partially methylated galactose, and two unidentified monosaccharides.3. The high content of galacturonic residues (68%) in the polysaccharide enables it to be classified as a pectin.Khimiya Prirodnykh Soedinenii, Vol. 1, No. 5, pp. 297–302, 1965     

Production and Purification of Pectinase from Bacillus subtilis 15A-B92 and Its Biotechnological Applications

Enzymes that degrade pectin are called pectinases. Pectinases of microbial origin are used in juice clarification as the process is cost-effective. This study screened a pectinase-producing bacterium isolated from soil and identified as Bacillus subtilis 15A B-92 based on the 16S rRNA molecular technique. The purified pectinase from the isolate showed 99.6 U/mg specific activity and 11.6-fold purity. The molecular weight of the purified bacterial pectinase was 14.41 ± 1 kD. Optimum pectinase activity was found at pH 4.5 and 50 °C, and the enzyme was 100% stable for 3.5 h in these conditions. No enzymatic inhibition or activation effect was seen with Fe²⁺, Ca²⁺, or Mg²⁺. However, a slight inhibition was seen with Cu²⁺, Mn²⁺, and Zn²⁺. Tween 20 and 80 slightly inhibited the pectinase, whereas iodoacetic acid (IAA), ethylenediaminetetraacetate (EDTA), urea, and sodium dodecyl sulfate (SDS) showed potent inhibition. The bacterial pectinase degraded citrus pectin (100%); however, it was inactive in the presence of galactose. With citrus pectin as the substrate, the Km and Vmax were calculated as 1.72 mg/mL and 1609 U/g, respectively. The high affinity of pectinase for its substrate makes the process cost-effective when utilized in food industries. The obtained pectinase was able to clarify orange and apple juices, justifying its application in the food industry.     

Simultaneous capillary GC of acids and sugars as their silyl(oxime) derivatives: Quantitation of chlorogenic acid,raffinose, and pectin substances

Our GC-MS method for the simultaneous quantitation of sugars and acids as their silyl(oxime) derivatives, from one solution by one injection, has been extended to the reproducible determination of high molecular weight compounds sensitive to decomposition yet requiring a high evaporation temperature (e.g. chlorogenic acid and rffinose) and for the quantitation of the decomposition products of pectin (i.e., for the determination of galacturonic acid at low ng levels in the presence of a 10–100 fold excess of glucose eluting just before the acid). The optimized GC procedure has been used for quantitation of the sugar and acid (including chlorogenic acid) composition of potato samples, and for the determination of the increasing amount of the decomposition products of pectin substances in apple pulp after different storage times.