Purification of Chlorophenol Isomers by Stripping Crystallization Combining Melt Crystallization and Vaporization

Stripping crystallization (SC) was introduced in this work to purify p-chlorophenol from the p-chlorophenol-rich liquid mixture and to purify m-chlorophenol from the m-chlorophenol-rich liquid mixture, respectively. Essentially, SC combines melt crystallization and vaporization to produce the solid product and the vapor from a liquid mixture via a series of three-phase transformations at reduced pressures during the cooling process. At the end of the SC, only the solid product remained while the liquid mixture was almost eliminated and the produced vapor was removed. A set of differential equations based on the mass and energy balances were proposed to determine the incremental variations of the amounts of remaining liquid, produced solid and produced vapor during the batch SC process. The experimental yield and product purity of the final product obtained from the batch SC experiments were compared with those predicted by the model.     

Purification and Crystallization of Flammulin, a Basic Protein with Anti—tumor Activities from Flammulina Velutipes

Flammulin, an anti-tumor protein, was purified from the aqueous extract of basidiomes of Flammulina Velutipes to electrophoretic homogeneity and crystallized by microdialysis against a polyethylene glycol- sodium phosphate buffer. The purified product was found to have marked anti-tumor effects and be able to affect the tumor cells directly.     

红外光谱法研究己内酯非等温结晶过程

红外光谱法研究己内酯非等温结晶过程;特征吸收谱带;结晶度;结晶速率     

不同Pr2O3含量硼铝硅酸盐玻璃析晶性能研究

采用高温熔融法制备了不同Pr2O3掺量的SiO2-B2O3-Al2O3-BaO玻璃,利用DTA,XRD,TEM以及IR等手段研究了稀土氧化物掺入量对玻璃热稳定性、析晶行为、玻璃结构的影响。结果表明：当稀土掺入量逐渐增加时,玻璃的热稳定性递减;在高于Tx的温度下进行热处理,玻璃析晶产物逐渐由PrAl2.03（B4O10）O0.54向PrBO3转变;Pr^3＋填充在[SiO4],[BO4]和[BO3]等结构单元组成的混合网络的空隙之中,网络中间离子Al^3＋随稀土氧化物的增加,发生从网络变性离子向网络形成离子的转变。     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

Enhancing Task Specific Ionic Liquids’ Thermal Stability by Structural Modification

Summary. Thermal retro-Michael decomposition of task specific ionic liquids (TSILs) was efficiently suppressed by hydrogenation of the oxobutyl side chain yielding a hydroxy-functionalized TSIL.     

络合物稳定常数及有机试剂纯度的光度法测定

利用摩尔比法先测出络合物的表观稳定常数，再通过物料平衡及线性回归处理，建立了在不纯试剂体系中同时测定络合物稳定常数及试剂纯度的新方法，方法用于Cu-5-Cl-PADAB体系，结果满意。     

Dynamic Stability of Heavy Crude Oil-in-Water Emulsions

The transport of heavy oil as concentrated oil-in-water (O/W) emulsions is one of the most promising pipeline techniques, and how to ensure a steady flow is the key to the successful application of this technology. Most of the previous studies focused on the static stability of the emulsions. However, the stability changes constantly with time and external shearing in the transportation. In this paper, a stable O/W emulsion was prepared for its dynamic stability to be tested by three methods of small-scale flow loop, rheology and stirring, respectively. The results indicated that the O/W emulsion with 30 vol.% water and 0.2 wt.% OP-10 could well satisfy the transport requirement. A critical temperature existed to make the rheological property of the emulsion rapidly deteriorate. For low-Reynolds-number turbulent pipe flow, an appropriate increase of temperatures and shear rates was conducive to the flocculation-dissociation balance of the internal phase, which could effectively reduce the apparent viscosity of the emulsion and the flow frictional resistance. High flow rate of O/W emulsions could be transported at relatively low temperatures to ensure great dynamic stability, and low flow rate of that could be done at relatively high temperatures to obtain low apparent viscosity.     

Kinetics of Nonisothermal and Isothermal Crystallization of Metallocene Polyethylene

Thedevelopmentofmetallocenecatalystsundoubtedlyrepresentsarevolutioninthepolyolefinbusiness.MetallocenePE(MPE)coverspolyethyleneswhichareproducedbymetallocenecatalysttechnology.EXXONChemicalCo.developedanewmeta-llocenepolyethylene-EXCEED'"PEin1991.Nowmoreandmoreeffortsarespentonthisinterestingproject.Uniformmolecularstructureandnarrowmoleculardistribution,makeMPEbetterphysicalpropertiesthanthoseofconventionalPE,andalsomakeitlowmeltstrengthandbadprocessability.Sotherelationshipbetween…     

Fuzzy Assessment of Asphaltene Stability in Crude Oils

Knowledge about stability of asphaltene, determined by difference index, is of significant interest because of the many problems associated with asphaltene precipitation. This study followed two parallel fuzzy strategies for estimating refractive index (RI) of crude oil and refractive index of crude oil at onset of asphaltene precipitation (PRI) from Sara fraction data. Predicted RI and PRI were then utilized for easy and fast diagnosis of asphaltene stability by dint of calculating difference index (or ΔRI = RI – PRI). The experimental data reported in the literature have been used for model developing and checking. An acceptable agreement between fuzzy predicted values and experimental data confirmed the power of fuzzy logic technique in prediction of RI, PRI, and consequent ΔRI. In this study, ΔRI was not predicted directly mainly for two reasons. First, RI and PRI contain invaluable information themselves and predicting them fulfills the need for these information when they are desired. Second, dividing the problem into two simpler parts and solving them separately enhances the terminal accuracy of prediction. Although the regression accuracy for ΔRI was not completely satisfied, the classification accuracy for discriminating between stable and unstable situations was 100%.      

Crystallization behavior and morphology of PE-g-LCP copolymers

 This study presents DSC and optical microscopy investigations on copolymers of semiflexible liquid crystalline polymer SBH 112 grafted to functionalized low molecular mass polyethylene (PEox) obtained by melt polycondensation or reactive blending procedures. The crystallization behavior of the PE-g-SBH copolymers has been studied under non-isothermal measurement conditions carried out at different cooling rates. The crystallization temperature (T _cr) of the PE component of the copolymers decreases steadily upon increasing the concentration of the SBH grafts. It was found that the copolymers prepared by reactive blending crystallize at slightly higher T _cr than those prepared by polycondensation and with a higher rate, confirmed by the determination of the crystallization rate coefficients (CRC). The results have been interpreted by the fact that the PE crystallizable segments and SBH grafts of the copolymers obtained by reactive blending are longer than those of the copolymers prepared by polycondensation. The overall nonisothermal crystallization kinetics has been studied by the Harnisch and Muschik equation. The results show that the mechanism of the crystallization of the PE phase changes only when the SBH content overruns ca.50%, due to the decrease of both nucleation and crystal growth rates. The morphology of the copolymers crystallized nonisothermally from melt has been examined by polarization microscopy. Fairly homogeneous morphology with tiny PE spherulites is observed for PE-g-SBH copolymers prepared by polycondensation with SBH as the minor phase. No sign of the dispersed LCP domains can be recognized. On the contrary, the morphology of the copolymers prepared by reactive blending is distinctly biphasic. The allegedly longer PE segments crystallize into tiny spherulites too, but the LC domains formed by the long SBH branches present in this type of copolymers appear clearly in the micrographs at room temperature. It is concluded that the copolymers prepared by reactive blending would be more effective as compatibilizers for PE/SBH blends than those prepared by polycondensation. Received: 9 October 1996 Accepted: 13 January 1997     

微波场中T型分子筛的合成及晶化研究

研究了微波场中T型分子筛的结晶过程。考察了微波加热体系中合成参数如合成时间、溶胶组成、反应压力和模板剂用量对分子筛晶化的影响。微波加热的主要优点是减少合成时间,无模板剂的溶胶在普通加热条件下的晶化时间需要120 h,而在微波场中则仅需要20～25 h。另一方面,由于微波的快速加热特性促进了稳定相钙十字沸石的生成,从而减小了次稳定相T型分子筛的结晶区间。在未添加模板剂条件时,100 ℃下微波水热合成T型分子筛的结晶区间为：20≤n_SiO2/n_Al2O3≤22和0.31≤ n_M2O/n_SiO2≤0.33(其中M₂O=Na₂O+K₂O, n_Na/n_K=3和n_M2O/n_SiO2=11.70)。在普通加热和微波加热合成体系中,添加模板剂均能扩大结晶区间,同时还可以进一步减少合成时间。     

Crystallization kinetic of fluoro- zirconate glasses by non-isothermal analysis

Fluoride glasses have been extensively studied due to their high transparency in the infrared wavelength. The crystallization kinetics of these systems has been studied using DTA and DSC techniques. Most of the experimental data is frequently investigated in terms of the Johnson-Mehl-Avrami (JMA) model in order to obtain kinetic parameters. In this work, DSC technique has been used to study the crystallization of fluorozirconate glass under non-isothermal conditions. It was found that JMA model was not fit to be applied directly to these systems, therefore, the method proposed by Málek has been applied and the Šesták-Berggren (SB) model seems to be adequate to describe the crystallization process. This revised version was published online in July 2006 with corrections to the Cover Date.     

海泡石原位晶化合成NaY分子筛的研究

首次用海泡石为硅源、高岭土为铝源,在水热条件下原位晶化合成NaY分子筛,采用粉末X射线衍射仪、电子扫描电镜等测试手段对所合成样品进行表征分析,着重考察晶化温度和投料配比对产品相对结晶度的影响.研究结果表明,NaY分子筛的形成受晶化温度的影响最大,随温度的升高,产品的相对结晶度显著提高,晶化温度升至100℃时,得到结晶度较高的NaY分子筛晶体.在原位晶化体系中,随n(SiO2)/n(Al2O3)减小,其相对结晶度增大;增加体系的n(Na2O)/n(SiO2)和减小n(H2O)/n(Na2O)都增大产品的相对结晶度;n(SiO2)/n(Al2O3)在投料比影响因素中占主导地位.     

Crystallization Behavior of Sol-Gel Derived Films by Self-Seeding Process

We propose the novel preparation method, Self-seeding Process, based on the following concept for low temperature crystallization of oxide films. Introduction of desirable inhomogeneity should give lowering of a crystallization temperature through heterogeneous nucleation accompanied with reduced activation energy. We carried out inspection of the above concept through use of PZT films. PZT gel films with the desirable inhomogeneity of microstructure were prepared, and their crystallization behaviors was examined. The PZT film was successfully crystallized at 500°C by the self-seeding process. The single phase (001) oriented PZT film with 0.55 m in thickness was obtained at 550°C for 5 min. The self-seeding process by microstructure control is efficient for the low temperature process of the oxide thin film.     

偏高岭土水热合成4A沸石晶化行为的研究

以偏高岭土为原料合成4A沸石,由于其合成过程工艺简单,成本低而一直受到普遍的关注,对于该法晶化过程的行为研究,近年来陆续出现报道,Rocha等^[1]研究认为偏高岭土在碱液中缓慢溶解,形成含SiO3^2-,SiOH基团和Al(OH)4^-的溶液,逐步缩合为硅铝酸钠凝胶,再进一步形成4A沸石晶粒并通过结构重排而转变为4A沸石,王建等^[2]研究提出偏高岭土在NaOH溶液中部分溶解,且迅速转变为偏高岭土,并伴有硅铝酸钠凝胶产生,同时偏高岭土也不断在碱液的作用下凝胶化,生成的凝胶再进一步转变为4A沸石,因而合成的4A沸石产品与化学合成法存在着较大的差异。对偏高岭土合成4A沸石的晶化历程,作者曾进行过研究^[3],发现偏高岭土在碱液中溶解很小,由偏高岭土转为4A沸石晶型,主要是在偏高岭土固相的基础上进行的。本文似从合成过程的机理方面,探讨偏高岭土合成4A沸石的晶化过程行为及其与化学法合成产品差异的关键所在。     

Crystallization Kinetics of Lithium Diborate Glass by DTA

The crystallization process of Li₂B₄O₇ in the glass of stoichiometric composition, characterized by the crystal growth of pre-existing nuclei, was analyzed kinetically by means of DTA. Because the number of pre-existing nuclei for the subsequent growth varies depending on the cooling rate of the glass-forming melt and heating rate of the as-prepared glass, a modified Kissinger plot was applied for evaluating the apparent activation energy to the crystal growth in the glass samples with three different thermal histories, i.e., the pre-annealed, slowly quenched and quickly quenched glasses. The process was characterized by the three dimensional growth of pre-existing nuclei with the apparent activation energy of ca 340 kJ mol⁻¹. This revised version was published online in August 2006 with corrections to the Cover Date.     

去氢枞酸类成核剂改性聚丙烯的非等温结晶动力学研究

对以去氢枞酸盐为成核剂的聚丙烯非等温结晶动力学进行了研究，用修正Avrami方程的Jexiorny法和莫志深法进行处理。结果表明：修正Avrami方程的Jeziorny方法和莫志深法都适用于去氢枞酸类成核剂改性的聚丙烯的非等温结晶动力学。在同样的降温速率下纯聚丙烯的t1/2比成核聚丙烯的t1／2要长，当降温速率为20K/min时，纯聚丙烯和成核聚丙烯的t1/2分别为0．78min和0．51min。同时从莫志深法得到的F(T)结果可以看出，达到相同的结晶度时纯聚丙烯所需的降温速率要大于成核聚丙烯所需的降温速率，说明成核剂的加入提高了聚丙烯的结晶速率。从Jeziorny法求出的纯聚丙烯和成核聚丙烯的Avrami指数分别为4．46和2．77，表明成核剂改变了聚丙烯的结晶成核和生长方式。     

Chiral Symmetry Breaking of Spiropyrans and Spirooxazines by Dynamic Enantioselective Crystallization

Dynamic enantioselective crystallization enabled the chiral symmetry breaking of two spiropyrans and one spirooxazine. The three spiro compounds afforded racemic conglomerate crystals, and easily racemized in alcoholic solution without irradiation. Optically pure enantiomorphic crystals were obtained by vapor-diffusion crystallization or attrition-enhanced deracemization (Viedma ripening). Their absolute configurations were determined by single-crystal X-ray analysis and each enantiomorphic crystal was correlated with its solid-state circular dichroism (CD) spectrum.     

氮化硼诱导聚乙烯分子结晶的分子动力学模拟

采用分子动力学方法(MD)研究熔体条件下聚乙烯分子在氮化硼纳米管表面和氮化硼片层表面的结晶机理。通过对聚乙烯分子结晶过程中晶体构象的演变、空间内分子分布的变化以及分子扩散特性的研究,从微观角度比较了两种结构氮化硼纳米材料对聚乙烯结晶的影响。结果表明一维结构的氮化硼纳米管诱导聚乙烯结晶的能力远高于二维片层状的氮化硼,说明纳米材料的维度影响着高分子材料的结晶性能。