A theoretical investigation of the nonrigid six-coordinate compounds [Mo(R)F5], [W(R)F5], and related compounds

Density functional calculations for [M(CH3)F5], [M(CF3)F5], [M(CH3S)F5], and [M(CF3S)F5] (M=Mo, W) show that they are expected to be nonrigid molecules, with energy barriers for the octahedral-trigonal-prismatic interchange as low as 7.2 kJ mol(-1). The ground state for the CH3- and CF3- compounds is trigonal prismatic, for the CH3S- and CF3S- compounds, (distorted) octahedral. All calculated compounds [M(C6F5)nF(6-n)] (M=Mo, W) have a trigonal-prismatic ground state, whereas the situation for [M(C6H5)nF(6-n)] (M=Mo, W) is more complex.     

Density, refractive index, interfacial tension, and viscosity of ionic liquids [EMIM][EtSO4], [EMIM][NTf2], [EMIM][N(CN)2], and [OMA][NTf2] in dependence on temperature at atmospheric pressure

The density, refractive index, interfacial tension, and viscosity of ionic liquids (ILs) [EMIM][EtSO 4] (1-ethyl-3-methylimidazolium ethylsulfate), [EMIM][NTf 2] (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide), [EMIM][N(CN) 2] (1-ethyl-3-methylimidazolium dicyanimide), and [OMA][NTf 2] (trioctylmethylammonium bis(trifluoromethylsulfonyl)imide) were studied in dependence on temperature at atmospheric pressure both by conventional techniques and by surface light scattering (SLS). A vibrating tube densimeter was used for the measurement of density at temperatures from (273.15 to 363.15) K and the results have an expanded uncertainty ( k = 2) of +/-0.02%. Using an Abbe refractometer, the refractive index was measured for temperatures between (283.15 and 313.15) K with an expanded uncertainty ( k = 2) of about +/-0.0005. The interfacial tension was obtained from the pendant drop technique at a temperature of 293.15 K with an expanded uncertainty ( k = 2) of +/-1%. For higher and lower temperatures, the interfacial tension was estimated by an adequate prediction scheme based on the datum at 293.15 K and the temperature dependence of density. For the ILs studied within this work, at a first order approximation, the quantity directly accessible by the SLS technique was the ratio of surface tension to dynamic viscosity. By combining the experimental results of the SLS technique with density and interfacial tension from conventional techniques, the dynamic viscosity could be obtained for temperatures between (273.15 and 333.15) K with an estimated expanded uncertainty ( k = 2) of less than +/-3%. The measured density, refractive index, and viscosity are represented by interpolating expressions with differences between the experimental and calculated values that are comparable with but always smaller than the expanded uncertainties ( k = 2). Besides a comparison with the literature, the influence of structural variations on the thermophysical properties of the ILs is discussed in detail. The viscosities mostly agree with values reported in the literature within the combined estimated expanded uncertainties ( k = 2) of the measurements while our density and interfacial tension data differ by more than +/-1% and +/-5%.     

The Vanadium(V) Oxoazides [VO(N3)3], [(bipy)VO(N3)3], and [VO(N3)5]2−

Vanadium(V) oxoazide [VO(N₃)₃] was prepared through a fluoride–azide exchange reaction between [VOF₃] and Me₃SiN₃ in acetonitrile solution. When the highly impact‐ and friction‐sensitive compound [VO(N₃)₃] was reacted with 2,2′‐bipyridine, the adduct [(bipy)VO(N₃)₃] was isolated. The reaction of [VO(N₃)₃] with [PPh₄]N₃ resulted in the formation and isolation of the salt [PPh₄]₂[VO(N₃)₅]. The adduct [(bipy)VO(N₃)₃] and the salt [PPh₄]₂₃[VO(N₃)₅] were characterized by vibrational spectroscopy and single‐crystal X‐ray structure determination, making these compounds the first structurally characterized vanadium(V) azides.     

The Molybdenum(V) and Tungsten(VI) Oxoazides [MoO(N3)3], [MoO(N3)3⋅2 CH3CN], [(bipy)MoO(N3)3], [MoO(N3)5]2−, [WO(N3)4], and [WO(N3)4⋅CH3CN]

A series of novel molybdenum(V) and tungsten(VI) oxoazides was prepared starting from [MOF₄] (M=Mo, W) and Me₃SiN₃. While [WO(N₃)₄] was formed through fluoride–azide exchange in the reaction of Me₃SiN₃ with WOF₄ in SO₂ solution, the reaction with MoOF₄ resulted in a reduction of Mo^VI to Mo^V and formation of [MoO(N₃)₃]. Carried out in acetonitrile solution, these reactions resulted in the isolation of the corresponding adducts [MoO(N₃)₃?2 CH₃CN] and [WO(N₃)₄?CH₃CN]. Subsequent reactions of [MoO(N₃)₃] with 2,2′‐bipyridine and [PPh₄][N₃] resulted in the formation and isolation of [(bipy)MoO(N₃)₃] and [PPh₄]₂[MoO(N₃)₅], respectively. Most molybdenum(V) and tungsten(VI) oxoazides were fully characterized by their vibrational spectra, impact, friction and thermal sensitivity data and, in the case of [WO(N₃)₄?CH₃CN], [(bipy)MoO(N₃)₃], and [PPh₄]₂[MoO(N₃)₅], by their X‐ray crystal structures.     

Solubility of H2S in ionic liquids [hmim][PF6], [hmim][BF4], and [hmim][Tf2N]

The solubility of hydrogen sulphide in three ionic liquids, viz. 1-hexyl-3-methylilmidazolium hexafluorophosphate ([hmim][PF₆]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim][BF₄]), and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([hmim][Tf₂N]), at temperatures ranging from 303.15 K to 343.15 K and pressures up to 1.1 MPa were determined. The solubility values were correlated using the Krichevsky–Kasarnovsky equation and Henry’s constants were obtained at different temperatures. Partial molar thermodynamic functions of solvation such as standard Gibbs free energy, enthalpy, and entropy were calculated from the solubility results. Comparison of the values obtained show that the solubility of H₂S in these three ionic liquids was in the sequence: [hmim][BF₄] > [hmim][PF₆] ≈ [hmim][Tf₂N].     

Speciation of nitrogen - [N(3-)] and [N(2)(2-)] - in binary compounds

The nitrogen content of the binary compounds SrN = Sr(4)[N](2)[N(2)], Sr[N(2)], and Ba[N(2)] (prepared by high-pressure syntheses) was determined analytically by using the carrier gas hot extraction method. For handling of the air- and moisture-sensitive samples, a transfer chamber was constructed to protect the compounds against decomposition before being analyzed. Additionally, it was necessary to develop a method allowing controlled and variable heating of the electrode furnace to get analytical results with high precision and accuracy. By means of a suitable temperature program it was possible not only to verify the existence but also to quantify the two different nitrogen species ([N(3-)] and [N(2)(2-)]), and thus confirm the results of recent neutron diffraction studies.     

Zur solvensfreien Darstellung von Tetramethylammoniumsalzen: Synthese und Charakterisierung von [N(CH3)4]2[C2O4], [N(CH3)4][CO3(CH3)], [N(CH3)4][NO2], [N(CH3)4][CO2H] und [N(CH3)4][O2C(CH2)2CO2(CH3)]

Solvent-free Synthesis of Tetramethylammonium Salts: Synthesis and Characterization of [N(CH₃)₄]₂[C₂O₄], [N(CH₃)₄][CO₃CH₃], [N(CH₃)₄][NO₂], [N(CH₃)₄][CO₂H], and [N(CH₃)₄][O₂C(CH₂)₂CO₂CH₃] A general procedure to synthesize tetramethylammonium salts is presented. Several tetramethylammonium salts were prepared in a crystalline state by solvent-free reaction of trimethylamine and different methyl compounds at mild conditions: [N(CH₃)₄]₂[C₂O₄] (cubic; a = 1 114.8(3) pm), [N(CH₃)₄][CO₃CH₃] (P2₁/n; a = 813.64(3), b = 953.36(3), c = 1 131.3(4) pm, β = 90.03(1)°), [N(CH₃)₄][NO₂] (Pmmn; a = 821.2(4), b = 746.5(3), c = 551.5(2) pm), [N(CH₃)₄][CO₂H] (Pmmn; a = 792.8(7), b = 791.7(3), c = 563.3(4) pm) and [N(CH₃)₄][O₂C(CH₂)₂CO₂CH₃] (P2₁; a = 731.1(2), b = 826.4(3), c = 1 025.2(3) pm, β = 110.1(1)°). The tetramethylammonium salts were characterized by IR-spectroscopy and X-ray diffraction. The crystal structures of the methylcarbonate and the nitrite are described.     

Preparation,structure, and unique thermal [2+2], [4+2], and [3+2] cycloaddition reactions of 4-vinylideneoxazolidin-2-one

The terminal allene C(alpha)=C(beta) bonds of 4vinylidene-2-oxazolidinone (2) readily undergo [2+2] cycloaddition with a wide variety of terminal alkynes, alkenes, and 1,3-dienes irrespective of their electronic nature under strictly thermal activation conditions (70-100 degrees C) and provide 3substituted (Z)-methylenecyclobutenes 6, 3substituted methylenecyclobutanes 7 and 8, and 3vinylmethylenecyclobutanes 9, respectively, in good to excellent yields. Alkenes react with 2 with complete retention of configuration. The [2+2] cycloaddition is concluded to proceed via a concerted [(pi(2s)+pi(2s))(allene) + pi(2s)] Hückel transition state on the basis of experimental evidences and quantum mechanical methods. Some highly polarized enones and nitrile oxide, on the other hand, react with 2 selectively at the internal C(4)=C(alpha) double bonds and give spiro compounds 10 and 11, respectively. The bent allene bonds (173-176 degrees) and the unique reactivity associated with 2 are attributed to a low-lying LUMO (C(alpha)=C(beta)) that is substantiated by a through-space sigma*(N-SO(2))-pi*(C(alpha)=C(beta)) orbital interaction.     

DFT investigation of homotrinuclear and heterotrinuclear [M3(Phz)2], [MM′2(Phz)2], [M3(CO)2(Phz)2], [MM′2(CO)2(Phz)2] sandwich complexes (M = Ti,Cr, Fe and Ni; M′ = V and Mn,Phz = C12H8N2): predicted models and electronic structures

Structural Chemistry - The results described in this work report a DFT/BP86 (using the TZ2P basis) study concerning the molecular and electronic structures of homotrinuclear and heterotrinuclear...     

Synthesis, characterization, and in vitro cytotoxicity of some gold(I) and trans platinum(II) thionate complexes containing water-soluble PTA and DAPTA ligands. X-ray crystal structures of [Au(SC4H3N2)(PTA)], trans-[Pt(SC4H3N2)2(PTA)2], trans-[Pt(SC5H4N)2(PTA)2], and trans-[Pt(SC5H4N)2(DAPTA)2

A series of gold(I) and platinum(II) complexes of the type [Au(SR)(P)] and trans-[Pt(SR) 2(P) 2] [SR = 2-thiopyridine (SPy), 2-thiopyrimidine (SPyrim); P = 1,3,5-triaza-7-phosphaadamantane (PTA), 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane (DAPTA)] were prepared and characterized, and their in vitro cytotoxicities against a panel of seven human cancer cell lines were evaluated. The highly water soluble gold(I) complexes [Au(SR)(P)] [P = PTA and SR = SPy ( 1), SPyrim ( 2); P = DAPTA and SR = SPy ( 3), SPyrim ( 4)] showed low cytotoxicity, while the platinum(II) complexes trans-[Pt(SR) 2(P) 2] [P = PTA and SR = SPyrim ( 5), SPy ( 6); P = DAPTA and SR = SPyrim ( 7), SPy ( 8)] demonstrated potent cytotoxicity for ovarian, colon, renal, and melanoma cancer cell lines on the basis of a comparison with ID 50 values for some established cytotoxic drugs. Single crystals of 2, 5, 6, and 8 suitable for X-ray structural characterization were obtained, and the study revealed the trans configuration for 5, 6, and 8 in their solid states.     

1,1'-Di(heteroatom)-functionalised ferrocenes as [N,N], [O,O] and [S,S] chelate ligands in transition metal chemistry

Dppf is one of the most useful and popular ligands in coordination chemistry. Its overwhelming success has overshadowed and arguably even delayed the development and use of closely related ferrocene-based ligands with two ligating N, O or S atoms. Recently, however, dynamic progress concerning such homo-donor ligands can be noted. This tutorial review describes the main results obtained over the past decade in order to introduce the reader to an exciting field which currently shows particularly rapid development. The material is organised in sections according to ligand type, followed by a section which summarises the applications reported so far.     

Trimerization of alkali dicyanamides M[N(CN)2] and formation of tricyanomelaminates M3[C6N9] (M = K, Rb) in the melt: crystal structure determination of three polymorphs of K[N(CN)2], two of Rb[N(CN)2], and one of K3[C6N9] and Rb3[C6N9] from X-ray powder diffractometry

The alkali dicyanamides M[N(CN)2] (M=K, Rb) were synthesized through ion exchange, and the corresponding tricyanomelaminates M3[C6N9] were obtained by heating the respective dicyanamides. The thermal behavior of the dicyanamides and their reaction to form the tricyanomelaminates were investigated by temperature-dependent X-ray powder diffractometry and thermoanalytical measurements. Potassium dicyanamide K[N(CN)2] was found to undergo four phase transitions: At 136 degrees C the low-temperature modification alpha-K[N(CN)2] transforms to beta-K[N(CN)2], and at 187degrees C the latter transforms to the high-temperature modification gamma-K[N(CN)2], which melts at 232 degrees C. Above 310 degrees C the dicyanamide ions [N(CN)2]- trimerize and the resulting tricyanomelaminate K3[C6N9] solidifies. Two modifications of rubidium dicyanamide have been identified: Even at -25 degrees C, the a form slowly transforms to beta-Rb[N(CN)2] within weeks. Rb[N(CN)2] has a melting point of 190 degrees C. Above 260 degrees C the dicyanamide ions [N(CN)2]- of the rubidium salt trimerize in the melt and the tricyanomelaminate Rb3[C6N9] solidifies. The crystal structures of all phases were determined by powder diffraction methods and were refined by the Rietveld method. alpha-K[N(CN)2] (Pbcm, a = 836.52(1), b = 46.90(1), c =7 21.27(1) pm, Z = 4), gamma-K[N(CN)2] (Pnma, a = 855.40(3), b = 387.80(1), 1252.73(4) pm, Z = 4), and Rb[N(CN)2] (C2/c, a = 1381.56(2), b = 1000.02(1), c = 1443.28(2) pm, 116.8963(6) degrees, Z = 16) represent new structure types. The crystal structure of beta-K[N(CN)2] (P2(1/n), a = -726.92(1), b 1596.34(2), c = 387.037(5) pm, 111.8782(6) degrees, Z = 4) is similar but not isotypic to the structure of alpha Na[N(CN)2]. alpha-Rb[N(CN)2] (Pbcm, a = 856.09(1), b = 661.711(7), c = 765.067(9) pm, Z = 4) is isotypic with alpha-K[N(CN)2]. The alkali dicyanamides contain the bent planar anion [N(CN)2]- of approximate symmetry C2, (average bond lengths: C-N(bridge) 133, C-N(term) 113 pm; average angles N-C-N 170 degrees, C-N-C 120 degrees). K3[C6N9] (P2(1/c), a = 373.82(1), b = 1192.48(5), c = 2500.4(1) pm, beta = 101.406(3) degrees, Z = 4) and Rb,[C6N9] (P2(1/c), a = 389.93(2), b = 1226.06(6), c = 2547.5(1) pm, 98.741(5) degrees, Z=4) are isotypic and they contain the planar cyclic anion [C6N9]3-. Although structurally related, Na3[C6N9] is not isotypic with the tricyanomelaminates M3[C6N9] (M = K, Rb).     

Alkoxo‐Verbindungen des dreiwertigen Eisen: Synthese und Charakterisierung von [Fe2(OtBu)6], [Fe2Cl2(OtBu)4], [Fe2Cl4(OtBu)2] und [N(nBu)4]2[Fe6OCl6(OMe)12]

Alkoxo Compounds of Iron(III): Syntheses and Characterization of [Fe₂(OtBu)₆], [Fe₂Cl₂(OtBu)₄], [Fe₂Cl₄(OtBu)₂] and [N(nBu)₄]₂[Fe₆OCl₆(OMe)₁₂] The reaction of iron(III)chloride in diethylether with sodium tert‐butylat yielded the homoleptic dimeric tert‐‐butoxide Fe₂(OtBu)₆ ( 1 ). The chloro‐derivatives [Fe₂Cl₂(OtBu)₄] ( 2 ), and [Fe₂Cl₄(OtBu)₂] ( 3 ) could be synthesized by ligand exchange between 1 and iron(III)chloride. Each of the molecules 1 , 2 , and 3 consists of two edge‐sharing tetrahedrons, with two tert‐butoxo‐groups as μ₂‐bridging ligands. For the synthesis of the alkoxides 1 , 2 , and 3 diethylether plays an important role. In the first step the dietherate of iron(III)chloride FeCl₃(OEt₂)₂ ( 4 ) is formed. The reaction of iron(III)chloride with tetrabutylammonium methoxide in methanol results in the formation of a tetrabutylammonium methoxo‐chloro‐oxo‐hexairon cluster [N(nBu)₄]₂[Fe₆OCl₆(OMe)₁₂] ( 5 ). Crystal structure data: 1 , triclinic, P1¯, a = 9.882(2) Å, b = 10.523(2) Å, c = 15.972(3) Å, α = 73.986(4)°, β = 88.713(4)°, γ = 87.145(4)°, V = 1594.4(5) ų, Z = 2, d_c = 1.146 gcm^—1, R₁ = 0.044; 2 , monoclinic, P2₁/n, a = 11.134(2) Å, b = 10.141(2) Å, c = 12.152(2) Å und β = 114.157(3)°, V = 1251.8(4) ų, Z = 2, d_c = 1.377 gcm^—1, R₁ = 0.0581; 3 , monoclinic, P2₁/n, a = 6.527(2) Å, b = 11.744(2) Å, c = 10.623(2), β = 96.644(3)°, V = 808.8(2) ų, Z = 2, d_c = 1.641 gcm^—1, R₁ = 0.0174; 4 , orthorhombic, Iba2, a = 23.266(5) Å, b = 9.541(2) Å, c = 12.867(3) Å, V = 2856(2) ų, Z = 8, d_c = 1.444 gcm^—1, R₁ = 0.0208; 5 , trigonal, P3₁, a = 13.945(2) Å, c = 30.011(6) Å, V = 5054(2) ų, Z = 6, d_c = 1.401 gcm^—1; R_c = 0.0494.     

K[RuSalphenCl2], K[RuSalenCl2], and Electroconducting Polymers: Synthesis and Electrochemical Properties

K[RuSalphenCl₂], K[RuSalenCl₂], and electroconducting polymers on their basis are synthesized and their electrochemical properties are studied in solutions of two supporting electrolytes tetrabutylammonium perchlorate (TBAP) and NaClO₄. A comparative analysis of electroreduction and electropolymerization processes in these two electrolytes is performed. The cyclic voltammograms (CV) obtained for K[RuSalphenCl₂] are similar to those previously measured for K[RuSalenCl₂]. The polymers are synthesized for the first time that exhibit the reversible charge transport and the conditions of their formation are considered. The kinetics of formation of the redox-polymers is studied. The dependence of the polymer film thickness on the reduction potential and concentration of the starting Ru(III) complex is established.