Dilute solutions of poly(vinyl alcohol) derived from vinyl trifluoroacetate

The dilute-solution behavior of poly(vinyl alcohol) (PVA_VTFA), derived from vinyl trifluoroacetate, in water-dimethylsulfoxide (DMSO) mixtures was investigated. With solvent mixtures ranging from 10 to 20 vol % DMSO, the relation between the reduced viscosity η_sp/C and the polymer concentration C was linear for polymer concentrations above 0.2 g/dL, whereas in solutions in mixed solvents of other compositions the dependence was linear for polymer concentrations above 0.1 g/dL. The relation between the intrinsic viscosity [η] obtained for aqueous solutions of PVA_VTFA and the molecular weight M estimated from viscosity measurements in solutions of poly(vinyl acetate) (PVA_VTFA), obtained by acetylation of PVA_VTFA, was given by [η] = 7.34 × 10^?4 M^0.63. The value of [η] was greatest for the solvent mixture with 10 vol % DMSO and smallest for about 50 vol % DMSO, and Huggins constants k were smallest and greatest for these two cases, respectively. The turbidity of the solutions of low-molecular-weight PVA_VTFA, was higher than that of high-molecular-weight PVA_VTFA up to 30 vol % DMSO, and the reverse relation held for 40-70 vol % DMSO.     

Cyclization of vinyl ethers derived from amino alcohols

Cyclization of vinyl ethers derived from linear and cyclic α- and β-amino alcohols, catalyzed by mercury(II) acetate gave 2-methyloxazolidines and 2-methylperhydro-1,3-oxazines in 37–94% yield.     

Combinatorial synthesis and characterization of new asymmetric porphyrins as potential photosensitizers in photodynamic therapy

Porphyrins play a major role as active photosensitizers in noninvasive optical photodynamic therapy (PDT). In a modular approach, this paper presents a short review of the recent developments of porphyrin structures and materials with improved photosensitizing properties and then presents the synthesis and characterization of a series of new second generation asymmetrical meso-tetraphenylporphyrins varied by substituent in the meta positions of the phenyl rings with either -OH or -OCH3 groups, whereas in the para positions only with -OCH3 groups. The new series of differentially functionalized porphyrins were obtained by a combinatorial multicomponent synthesis (Adler-Longo method) by simultaneously using two different aldehydes: 3,4-dimethoxybenzaldehyde and 3-hydroxybenzaldehyde. The porphyrins were isolated, purified and characterized by HPLC, TLC, UV-vis, fluorescence, MS, 1H-NMR, and 13C-NMR analysis, accompanied by DEPT 135 experiments. Because of the fact that the medium in cancerous tissues is often more acidic than in normal tissues, the capacity of these porphyrins to exist simultaneously in aggregated and protonated forms was also investigated, in tetrahydrofuran (THF) and acid THF-water systems, underlying the changes in the photophysical behaviour. The relative fluorescence quantum yields (Phif) were calculated in comparison with meso-tetraphenylporphyrin (TPP), and the values between 0.14-0.26 were found to be promising for further trials. The series of asymmetrically substituted tetraphenylporphyrins, as the new class of supramolecular materials, are suitable for further functionalization in order to improve their photophysical properties, and they could represent interesting potential PDT photosensitizers.     

New stereoselective beta-glycosylation via a vinyl oxirane derived from D-glucal

[reaction: see text] The reaction of the vinyl oxirane 1 derived from D-glucal with a series of O-nucleophiles (alcohols, phenol, and diacetone D-glucose) affords the corresponding 2-unsaturated beta-O-glycosides in a completely stereoselective way (syn 1,4-addition pathway). Epoxide 1 is generated in situ by treatment of the corresponding hydroxy mesylate 2 with t-BuOK in anhydrous benzene.     

Novel cationically polymerizable propenyl and vinyl ethers derived from renewable sources

The preparation of several novel mono- and dipropenyl and divinyl ethers derived from renewable starting materials is described using simple, straightforward synthetic methods. Utilizing real-time infrared spectroscopy, the reactivity of the monomers in photoinitiated cationic polymerization was studied employing diaryliodonium and triarylsulfonium salts as photoinitiators. The monomers were shown to undergo very rapid cationic photopolymerization. © 1994 John Wiley & Sons, Inc.     

Preparation of water-soluble photoresist derived from poly(vinyl alcohol)

The reaction of PVA with 2,2-dialkoxyethoxystyrylpyridinium or quinolinium salts is described. The resultant water-soluble polymers, which contain small amounts of the styrylpyridinium- or quinolinium group, exhibited high photosensitivity. Among the polymers prepared PVA-bearing 4-oxystyrylquinolinium group was photoinsolubilized with visible light that corresponded to an argon laser.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

Radical polymerization of the quinone derived from monoethanolamine vinyl ether and chloranil

Radical polymerization of the quinone derived from monoethanolamine vinyl ether and 2,3,5,6-tetrachloro-1,4-benzoquinone (chloranil) was studied by classical polarography. The conditions of preparation of the redox polymer were optimized. The kinetic characteristics of the process were calculated.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1389–1391.Original Russian Text Copyright © 2004 by Ergozhin, Mukhitdinova, Shoinbekova, Nikitina, Zhunusova.     

Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.     

Fractionation of poly(vinyl alcohol) derived from poly(vinyl acetate) from its aqueous solution induced by shearing force-IV

Summary In order to clarify the mechanism of crystallization under molecular orientation, the fractionation for poly(vinyl alcohol) (VAc-PVA) derived from vinyl acetate from its aqueous solution was carried out under shearing force. The fibrillar crystals grown by shearing force from solutions were produced on the stirrer and in solution simultaneously. The fibrillar crystals had a diameter of approximately 1 mm and a length of 1 cm in the case of the initial polymer concentration of 2.0%, and approximately 1 mm and 5 cm in the case of 0.5%. The initial rate of precipitation (Rs) for the precipitates produced in solution was higher than that (Rr) on the stirrer. The difference betweenRs andRr increased with an increase in initial polymer concentration. The difference in the percentages of syndiotactic diads of precipitates grown on the stirrer and those in solution was not found, and the percentages of syndiotactic diads of each fraction decreased in the order of fractionation. Furthermore, the difference in the molecular weight of precipitates grown on the stirrer and those in solution was not found in the case of the higher polymer concentration, whereas it was found clearly in the case of lower one.

---

Zusammenfassung Um den Mechanismus der Kristallisation unter molekularer Orientierung zu klären, wurde die Fraktionierung von Polyvinylalkohol (VAc-PVA), der aus Vinylacetat hergestellt war, in wäßriger Lösung unter Scherkräften durchgeführt. Die von Lösung unter Scherung gewachsenen flbrillären Kristalle erscheinen gleichzeitig in Lösung und auf dem Rührer. Die aus Lösung gewonnenen Faserkristalle hatten einen Durchmesser von etwa 1 mm und eine Länge von etwa 1 cm bei einer anfänglichen Konzentration des Polymeren von 2.0%, etwa 1 mm und 5 cm resp. für 0.5%. Die anfängliche Fällungsgeschwindigkeit (Rs) der in Lösung wachsenden Niederschläge war höher als diejenige (Rr) auf dem Rührer. Ein Unterschied im Gehalt an syndiotaktischen Diaden zwischen den vom Rührer und aus der Lösung entnommenen Faserkristallen ließ sich nicht feststellen, und die syndiotaktischen Diaden nahmen in beiden Proben mit der Ordnung der Fraktionierung ab. Darüber hinaus ließ sich ein Unterschied im Molekulargewicht zwischen den auf dem Rührer und in der Lösung gewachsenen faserigen Kristallen bei der höheren Anfangskonzentration des Polymeren nicht feststellen, aber bei der niedrigeren Anfangskonzentration des Polymeren war die Auswirkung des Molekulargewichtes deutlich.

---

---

Mechanical Denaturation of High Polymers in Solutions, XXV.     

Photopolymerization of vinyl ether networks using an iodonium initiator—The role of photosensitizers

Photo‐differential scanning calorimetry (photo‐DSC) and UV‐visible spectrometry were used to investigate the photocuring kinetics of visible light initiated cationic photopolymerization of triethyleneglycol divinyl ether with a diphenyl iodonium salt and three photosensitizers, 1‐chloro‐4‐propoxy‐9H‐thioxanthen‐9‐one (CPTXO), acridine orange (AO), and camphorquinone (CQ). Although all photosensitizers were effective in causing photopolymerization, CPTXO and AO photo‐reacted during the irradiation; whereas CQ was not significantly consumed during the timescale of the photo‐DSC experiment. This difference in photo‐reactivity has not been reported previously, and indicates that the reaction of the iodonium ion with CPTXO and AO results in the formation of the photosensitizer radical cation, whereas the CQ mechanism involves the reduction of the CQ excited state to a ketyl radical by a H‐donor (monomer) followed by the oxidation of the ketyl radical by the iodonium salt and thus regeneration of the CQ. For the CPTXO and AO systems, the photopolymerization rate was retarded by a radical inhibitor but the CQ system was unaffected, which confirms that different mechanisms are involved. The cure rate was found to be proportional to the concentrations of CPTXO and CQ but appeared to follow an approximately square root dependence on the AO concentration. Mechanisms to explain these differences were presented. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5474–5487, 2009     

Cationic polymerization of redox monomers derived from monoethanolamine vinyl ether and various quinones

Cationic polymerization of redox monomers derived from monoethanolamine vinyl ether and various chlorinated quinones in aqueous-organic solutions in the presence of HCl was studied. Optimal reaction conditions were found, and the kinetic characteristics of the reactions were calculated.     

An electrically conductive plastic composite derived from polypyrrole and poly(vinyl chloride)

An electrically conductive plastic material was obtained by the electrochemical polymerization of pyrrole in a poly(vinyl chloride) matrix. The transmission electron microscopy shows that polypyrrole is uniformly distributed in the matrix. The conductivity of the composites fall in the range of 5 to 50 S/cm, and their mechanical properties, as measured in a stress—strain test, are very similar to those of pure poly(vinyl chloride). These can be further improved by addition of poly(chloroprene) rubber as a plasticizer.     

Condensation of 2- and 4-fluorobenzaldehydes with vinyl ethers derived from amino alcohols

2- and 4-Fluorobenzaldehydes reacted with amino alcohol vinyl ethers to give Schiff bases, oxazolidines, and imidazolidines containing a vinyloxy group. The products attract interest as potential biologically active compounds.