Clouding Behavior and Thermodynamic Study of Nonionic Surfactants in Presence of Additives

The present study investigates the effect of different additives on the cloud point (CP) of nonionic surfactants Triton X-100 (TX-100) and Triton X-114 (TX-114) in aqueous solutions. The thermodynamic parameters of these mixtures were calculated at different additive concentrations. The cloud point of nonionic surfactants TX-100 and TX-114 decreased with the increment of electrolyte concentrations and increased with alcohol concentrations. The standard Gibbs free energy was found to be positive for both the surfactants, whereas the enthalpy and the entropy of the clouding phenomenon were found to be positive with alcohols and negative with electrolytes. The overall clouding process was endothermic for alcohols and exothermic for electrolytes.     

Mechanism of the oxidation of d-glucose onto colloidal MnO2 surface in the absence and presence of TX-100 micelles

Aqueous colloidal manganese dioxide (MnO₂) was prepared via titration by using potassium permanganate and sodium thiosulphate in aqueous neutral medium. The kinetics of oxidation of d-glucose onto the surface of colloidal MnO₂ have been studied spectrophotometrically. The results show that the rate of initial stage (nonautocatalytic path) increases with increasing the [d-glucose], [H⁺], and temperature and also upon addition of nonionic surfactant Triton X-100 (TX-100), which indicates that the surfactant enhances the concentration of d-glucose at the surface of the colloidal MnO₂. Hydrogen bonding interaction seemingly arises between –OH groups of d-glucose and oxygen of the ether linkages of polyoxyethylene chain of TX-100. A possible mechanism of the oxidative degradation of d-glucose is discussed in terms of d-glucose/TX-100 and colloidal MnO₂ interaction.     

Oxidation of Methionine by Colloidal MnO2 in Aqueous and Micellar Media: A Kinetic Study

The oxidation of methionine by freshly prepared colloidal manganese dioxide in aqueous as well as micellar media was studied spectrophotometrically at 35°C. The reaction between methionine and MnO₂ in both media exhibits 1:1 stoichiometry (methionine:MnO₂). The oxidation reaction is first order with regard to the MnO₂ concentration, but is fractional-order in the methionine concentration and HClO₄ concentrations. A catalytic effect of nonionic surfactant TX-100 on the rate of oxidation was observed and reaction rate was found to be proportional to {k′ + k″ [TX-100]}, where k′ and k″ are the rate constants in absence and presence of surfactant, respectively. The use of surfactant micelles is highlighted as, in favorable cases; the micelles help the redox reactions by bringing the reactants in a close proximity through hydrogen bonding. The oxidation reaction in aqueous and micellar media is shown to proceed via methionine–MnO₂ and methionine–MnO₂–TX-100 complexes, respectively, which decomposes slowly in a rate determining step to give methionine sulfoxide as the product. A suitable mechanism is proposed for these observations.     

Electrochemical behavior of anthraquinone in aqueous solution in presence of a non-ionic surfactant

Cyclic voltammetric behavior of anthraquinone in aqueous medium has been studied in presence of a non-ionic surfactant, Triton X-100 (TX-100) using sodium salt of anthraquinone-2-sulphonic acid (AQS) as the electro-active species. When cathodic potential is applied, the anthraquinone (AQ) group of AQS is reduced to its dianion. In the reverse scan, the oxidation of AQ²⁻ gives AQ. The electrochemical behavior shows a profound influence from the dissolved state of TX-100 in aqueous media. Spectrophotometric results indicate interaction between AQ and TX-100. A CEC (chemical–electrochemical–chemical) mechanism with the electrochemical reaction coupled with preceding interaction of AQS with TX-100 and following protonation reaction of reduced AQ has been proposed.     

Studies on the molecular interaction of safranin-T with surfactants

The spectrophotometric studies of safranin-T (Saf-T) dye in an aqueous solution containing three different types of surfactants such as CTAB (cationic), SLS (anionic) and Triton X-100 (TX-100), Tween-20, 40, 60 and 80 (nonionic) show that Saf-T forms a 1:1 molecular complex with TX-100, Tweens and SLS. Such a type of interaction is absent in Saf-T and CTAB. The thermodynamic and spectrophotometric properties of these complexes suggest that Saf-T forms a strong charge transfer (CT) complex with TX-100 and Tweens, whereas the interaction of Saf-T with SLS is coulombic in nature. Photogalvanic and photoconductometric studies also support the above interactions. In addition to this, the electron-donating ability among the nonionic surfactants i.e. TX-100 and Tweens towards dye, role of surface in CT interaction, the site of CT interaction and the intensity and stability of CT interaction between Saf-T and nonionic surfactants have been pointed out.     

Mutual influence of cetyltrimethylammonium bromide and Triton X-100 on their adsorption at the water–air interface

On the basis of surface tension values of the aqueous solution of cetyltrimethylammonium bromide (CTAB) and Triton X-100 (TX-100) mixtures measured at 293 K as a function of CTAB or TX-100 concentration at constant TX-100 or CTAB concentration, respectively, the real surface area occupied by these surfactants at the water–air interface was established which is inaccessible in the literature. It appeared that at the concentration of the CTAB and TX-100 mixture in the bulk phase corresponding to the unsaturated monolayer at the water air-interface this area is the same as in the monolayer formed by the single surfactant at the same concentration as in the mixture. In the saturated mixed monolayer at this interface the area occupied by both surfactants is lower than that in the single surfactant monolayer corresponding to the same concentration in the aqueous solution. However, the decrease of the CTAB adsorption is lower than that of TX-100 and the total area occupied by the mixture of surfactants is also lower than that of the single one. The area of particular surfactants in the mixed saturated monolayer changes as a function of TX-100 and CTAB mixture concentration and at the concentrations close to CMC or higher the area occupied by both surfactants is the same. The changes of the composition of the mixed surface monolayer are connected with the synergetic effect in the reduction of the water surface tension by the adsorption of CTAB and TX-100 at the water–air interface. This effect was confirmed by the values of the standard Gibbs free energy of adsorption of both individual surfactants and their mixtures with different compositions in the bulk phase determined by using the Langmuir equation if RT instead of nRT was applied in this equation.     

Study on cloud points of Triton X-100-cationic gemini surfactants mixtures: A spectroscopic approach

This study investigates the effects of various cationic surfactants on the cloud point (CP) of the nonionic surfactant Triton X-100 (TX-100) in aqueous solutions. Instead of visual observation, a spectrophotometer was used for measurement of the cloud point temperatures. The values of CPs for Triton X-100 can be measured directly because TX-100 has an average number of oxyethylene units per molecule of p ≈ 9.5 and a CP = 66.0 °C. Quaternary ammonium dimeric surfactants (m-s-m, m = 10, 12, and 16, and s = 2, 6, and 10) were synthesized and used. The melting temperature T_M and the Krafft temperature T_K were measured for 1 wt% aqueous solutions of these synthesized surfactants. The melting temperature of the solid gemini surfactants increased with the carbon number of the alkyl chain. The results showed that additions of the gemini surfactants (which are infinitely miscible with water) to Triton X-100 increased the cloud point of the TX-100 solutions. All salts tested in these studies had a large effect on the CPs of nonionic surfactants due to their effect on water structure and their hydrophilicity. The effect of the alkyl chain length of the gemini surfactant on the CP of Triton X-100 is therefore more important than the spacer chain length.     

Studies on the molecular interaction of Erythrosine ‘B’ with surfactants

The spectroscopic investigation on anionic dye, Erythrosine ‘B’(EB) with three different types of surfactants such as CTAB (cationic), sodium lauryl sulphate (SLS; anionic) and Triton X-100 (TX-100),Tween-20, 40, 60 and 80 (nonionic) in aqueous media shows that EB forms a 1:1 molecular complex with TX-100, Tweens and CTAB. No interaction is observed between EB and SLS. The thermodynamic and spectrophotometric properties of these complexes suggest that EB forms a strong charge transfer (CT) complex with TX-100 and Tweens whereas the interaction of EB with CTAB is coulombic in nature. Photogalvanic and photoconductometric studies also support the above interactions. In addition to this, the electron-donating ability among the nonionic surfactants, i.e. TX-100 and Tweens towards dye, role of surface in CT interaction, the site of CT interaction and the intensity and stability of CT interaction between EB and nonionic surfactants have been pointed out.     

Growth kinetics of sulfur nanoparticles in aqueous surfactant solutions

Sulfur is an important element has many practical applications when present as nanoparticles. Despite the practicable applications, limited studies are available in the literature related to synthesis of sulfur nanoparticles. Growth kinetics of colloidal sulfur particles synthesized from aqueous solutions using different surfactants have been studied here. The effects of different parameters such as reactant concentration, temperature, sonication, types of acids, types of surfactants, and even surfactant concentration are studied on the growth kinetics. Since the reaction rate is fast, particle growth depends on the parameters which affect diffusion of sulfur molecules. There is a linear relationship found among the reactant concentration and the particle coarsening rate constant. The growth kinetics was studied in the presence of different surfactants such as nonionic (poly(oxyethylene) p-tert-octylphenyl ether, TX-100), anionic (sodium dodecylbenzene sulfonate, SDBS), cationic (cetyltrimethyammonium bromide, CTAB) and results show the coarsening constant changes according to the following order: water>TX-100>SDBS>CTAB. The particle growth rate also depends on the surfactant concentration, coarsening rate constant decreases with the increase in surfactant concentration and become constant close to the critical micellar concentration (CMC). The coarsening rate constant also highly depends on the types of acid used as catalyst.     

Kinetics,mechanism and cloud point measurements in the oxidative degradation of non-ionic Triton X-100 surfactant in acidic permanganate solutions

The polyoxyethylene chain of non-ionic surfactant Triton X-100 [4-(1,1,3,3-tetramethylbutyl) phenyl polyethylene glycol,TX-100] was degraded by permanganate in the presence of HClO₄. The oxidative degradation rate and cloud point have been obtained as a function of [surfactant], [permanganate], [HClO₄], and temperature. Dependence of the reaction rate on adding inorganic salts (Na₄P₂O₇, NaF and MnCl₂) was also examined. The oxidation rate increased with increase in [TX-100] and [H⁺]. The higher order kinetics with respect to [TX-100] at lower [H⁺] shifted to lower order at higher [H⁺]. The cloud point of TX-100 (67°C) shifted to lower temperature (23±0.5°C) after oxidative degradation of the polyoxyethylene chain. Evidence of complex formation between TX-100 and MnO ₄ ⁻ was obtained spectrophotometrically. Presence of the primary alcoholic (–OH) group in the TX-100 skeleton is responsible for the degradation of oxyethylene chain. Both monomeric and aggregated TX-100 molecules are oxidized by permanganate. A catalytic oxidation mechanism is proposed on the basis of the experimental findings.     

Composition of Surface Layer at the Water–Air Interface and Micelles of Triton X-100 + Rhamnolipid Mixtures

Measurements of the surface tensions, densities and viscosities of aqueous solutions of Triton X-100 (TX-100) and rhamnolipid (RL) mixtures, at constant concentration of RL or TX-100, were carried out. The measured values of the surface tension were compared to those determined using different theoretical models and on the basis of the surface tension of aqueous solutions of individual surfactants. From the surface tension isotherms, the Gibbs surface excess concentration of TX-100 and RL, the composition of surface layer and the standard Gibbs free energy of adsorption at the water–air interface were determined. Moreover, on the basis of surface tension, density and viscosity isotherms, the CMC of surfactants mixtures were evaluated. From the density isotherms, apparent and partial molar volumes of TX-100 and RL were also determined. These volumes were compared to those calculated from the sizes of TX-100 and RL molecules. There was observed a synergetic effect in the reduction of water surface tension and micelle formation, which was confirmed by the intermolecular interactions parameter. In the case of micelle formation, this effect was discussed based on the standard Gibbs free energy of micellization as well as of TX-100 and RL mixing in the micelles. The synergism of TX-100 and RL mixtures in the reduction of water surface tension and micelle formation was explained on the basis of electrostatic interactions between the hydrophilic part of TX-100 and RL molecules; this was supported by pH measurements.     

Redox polymerization of 2-hydroxyethyl methacrylate (HEMA). I. Influence of surfactants on polymerization kinetics

Oxidation of ferrous orthophenanthroline (FeP) by peroxydiphosphate (PP) in aqueous medium at pH 1 was followed spectrophotometrically. Kinetic analysis has shown that oxidation occurs via the formation of an intermediate complex between FeP and PP. Equi-librium and rate constants were calculated. Influence of surfactants on the oxidation of FeP by PP was also Investigated. The equilibrium constant for complex formation was found to be higher in the presence of surfactants. The enhanced complex formation has been attributed to the ionic interactions between the charged surfactant and the ionic species in the reaction medium. Polymerization of HEMA initiated by the redox system,FeP/PP, was carried out in aqueous medium, under the conditions of excess reductant over oxidant and excess oxidant over reductant. The polymerization followed different mech-anisms under these conditions; with excess oxidant, the growing polymer radicals underwent oxidative termination, while with excess reductant, primary radical termination was pre-ferred. The effect of surfactants on the aqueous polymerization of HEMA using the redox system FeP/PP was also investigated. In addition to the decrease in rate, the polymerization followed a different mechanism in the presence of surfactants, the growing radicals ter-minated by mutual interaction. © 1995 John Wiley & Sons, Inc.     

Fluorescence of 4-dimethylaminochalcone and interaction in the system aromatic amines-surfactants

It is demonstrated that 4-dimethylaminochalcone (DMC) can be used as a fluorescent probe for studying the microenvironment in the arylamine-surfactant system. A molecular simulation of the location of DMC at the water-lipophilic medium phase boundary is performed. The fluorescence of DMC is studied in aqueous solutions of dimethylformamide and surfactants of different natures. The influence of the nature and concentration of arylamines on the characteristics of the fluorescence of DMC in micellar TX-100 solutions is revealed.     

Correlation between surface free energy of quartz and its wettability by aqueous solutions of nonionic, anionic and cationic surfactants

The measurements of the advancing contact angle for water, glycerol, diiodomethane and aqueous solutions of Triton X-100 (TX-100), Triton X-165 (TX-165), sodium dodecyl sulfate (SDDS), sodium hexadecyl sulfonate (SHDS), cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPyB) on quartz surface were carried out. On the basis of the contact angles values obtained for water, glycerol and diiodomethane the values of the Lifshitz–van der Waals component and electron-acceptor and electron-donor parameters of the acid–base component of the surface free energy of quartz were determined. The determined components and parameters of the quartz surface free energy were used for interpretation of the influence of nonionic, anionic and cationic surfactants on the wettability of the quartz. From obtained results it was appeared that the wettability of quartz by nonionic and anionic surfactants practically does not depend on the surfactants concentration in the range corresponding to their unsaturated monolayer at water–air interface and that there is linear dependence between adhesional and surface tension of aqueous solution of these surfactants. This dependence for TX-100, TX-165, SDDS and SHDS can be expressed by lines which slopes are positive. This slope and components of quartz surface free energy indicate that the interaction between the water molecules and quartz surface might be stronger than those between the quartz and surfactants molecules. So, the surface excess of surfactants concentration at the quartz–water interface is probably negative, and the possibility of surfactants to adsorb at the quartz/water film–water interface is higher than at the quartz–water interface. This conclusion is confirmed by the values of the adhesion work of “pure” surfactants, aqueous solutions of surfactants and water to quartz surface. In the case of the cationic surfactants the relationship between adhesional and surface tension is more complicated than that for nonionic and anionic surfactants and indicates that the relationship between the adsorption of the cationic surfactant at water–air and quartz–water interface depends on the concentration of the surfactants in the bulk phase.     

Suitable combination of promoter and micellar catalyst for chromic acid oxidation of formaldehyde to formic acid in aqueous acid media at room temperature

The chromic acid oxidation of formaldehyde in micellar solution of sodium dodecyl sulphate (SDS)/TX-100 at room temperature has been investigated under pseudo first-order condition. Heterocyclic bases such as picolinic acid (PA), 2,2′-bipyridine (bipy), 1,10-phenanthroline (phen) have been employed which acts as a promoter. The rate of this oxidation reaction increased 50 times by combination of bipy and SDS micelle compared to rate in pure aqueous media. Here, we can avoid hazardous organic solvents, high pressure and temperature which are required for conventional preparation of formic acid. The catalytic effect of SDS/TX-100 micelle has been explained.     

吲哚方酸菁染料在表面活性剂水溶液中的光降解

考察了4种含有不同N位取代基的对称吲哚方酸菁染料在阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)、阴离子表面活性剂十二烷基硫酸钠(SDS)和非离子表面活性剂曲拉通(TX-100)水溶液中的光降解行为,结果表明,表面活性剂对染料分子具有保护作用,其影响大小为CTAB>TX-100>SDS,分子中有羧基的染料受影响程度最大。在表面活性剂浓度较低时,染料光降解程度随着表面活性剂浓度的增加而增加,但形成胶束后,染料的光降解程度则随着表面活性剂浓度的升高而降低。     

Role of surfactants in clouding phenomenon of imipramine hydrochloride

The clouding behavior of tricyclic antidepressant drug imipramine hydrochloride (IMP) in aqueous solution has been studied in presence of surfactants. A pH increase in the presence as well as in the absence of surfactants decreased the CP. Drug molecules become neutral at high pH and therefore head–head repulsion decreases which lead to CP decrease. Addition of non-ionic and cationic surfactants increased the CP whereas anionic surfactants showed a peaked profile. Effect of CTAB/TX-100 at different fixed drug concentrations showed that at all surfactant concentrations the CP value was higher for higher drug concentrations. However, variation of pH produced opposite effect: CP at all CTAB/TX-100 concentrations decreased with increasing pH. All results are interpreted in terms of increase in hydrophobicity or hydrophilicity of micelles on addition of surfactants.     

Minimizing losses of nonionic and anionic surfactants to a montmorillonite saturated with calcium using their mixtures

Losses of surfactants through sorption to soils/sediments, especially to clay minerals, by various chemical interactions such as sorption and precipitation threaten the success of surfactant in enhancing remediation of contaminated soil and groundwater. In this study, the behavior of mixtures of a nonionic surfactant (TX-100) and an anionic surfactant (SDBS) sorbed to a montmorillonite saturated with calcium (Ca-montmorillonite) was investigated, and compared with that of individual surfactants. It is shown that the amounts of both TX-100 and SDBS sorbed to Ca-montmorillonite are significant. However, the amount of either TX-100 or SDBS sorbed can be decreased and minimized when they are mixed with each other. Mixed micelle formation, which causes negative deviation of critical micelle concentrations (CMCs) from the ideal, is responsible for the decrease in sorbed TX-100 and sorbed SDBS in their mixtures. Because of their ability to minimize their amounts sorbed and thus enhance their active concentrations, as observed in mixed TX-100 and SDBS systems, mixed anionic-nonionic surfactants exhibit potential advantages in the area of enhanced soil and groundwater remediation.     

Capillary electrochromatography of Triton X-100

Nonionic surfactants such as Triton X-100 (TX-100) are comprised of a mixture of oligomers with a varying degree of length in the ethoxylate chain. The development of chromatographic methods for resolution of the various oligomers of TX-100 is of environmental importance, and can be useful for quality control and characterization in industrial manufacture. Capillary electrochromatography (CEC) is fast becoming a capable separation technique that combines the benefits of both high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE). This report presents a novel CEC method for separation of the various TX-100 oligomers. A comparison of monomeric vs. polymeric stationary phases for separation of TX-100 was conducted. Since the oligomers of TX-100 were better resolved on a monomeric phase as compared to polymeric phase, a systematic mobile phase tuning was performed utilizing a monomeric CEC-C18-3 microm-100 A stationary phase. Various mobile phase parameters such as acetonitrile (ACN) content, Tris concentration, pH, voltage, and temperature were manipulated in order to achieve the optimum separation of oligomers in less than 30 min.     

Polymerization of liposomes composed of diene-containing lipids by radical initiators. II. Polymerization of monodiene-type lipids as liposomes

1-Palmitoyl-2(2,4-octadecadienoyl)-sn-glycero-3-phosphocholine (POPC), a polymerizable lipid that contains one diene group in only a 2-acyl chain, was polymerized as liposome in an aqueous medium. Polymerization was initiated by water-insoluble azobisisobutyronitrile (AIBN), or water-soluble azobis(2-amidinopropane) dihydrochloride (AAPD). AIBN was mixed with monomeric lipids, and the mixture was dispersed in an aqueous medium by sonication to prepare AIBN-containing monomeric lipid liposomes. On the other hand, AAPD was simply added to the liposome suspension. The POPC liposomes were easily polymerized by the addition of AAPD, a water-soluble radical initiator, but few were polymerized by AIBN. The results suggested that the diene group in the 2-acyl chain was in an aqueous phase and, therefore, easily polymerized by a water-soluble radical initiator. The polymerized POPC liposomes were revealed to be more stable than those of monomeric ones because the scattered-light intensity from the polymerized POPC liposome suspension changed a little by the addition of Triton X-100. For only the polymerized ones, the liposome structure was confirmed by TEM after addition of an excess amount of Triton X-100.