Preparation of nanocomposites consisting of an epoxyamine polymer matrix with silver nanoparticles

A promising method is presented for the preparation of polymer composites in situ containing stabilized silver nanoparticles without the use of additional reducing systems. The effects of functionality and the structure of the epoxyamine polymer matrices on their capacity to reduce silver ions and stabilize growing silver nanoparticles were evaluated.     

Macromolecular systems and nanocomposites based on N-succinylchitosan and silver nanoparticles

Russian Chemical Bulletin - A water-soluble chitosan derivative, namely, N-succinylchitosan (NS-Chit), was used as a matrix for the formation of silver nanoparticles (AgNP) by metal ion re duction...     

Supramolecular hydrogel based on L-cysteine and silver nanoparticles

A supramolecular hydrogel is synthesized on the basis of L-cysteine and silver nitrate with incorporated silver nanoparticles (SNPs), which are stabilized by L-cysteine. The steps in the synthesis and the structure and properties of the new system are investigated.     

Copolymers of betulin esters and silver nanocomposites based on them

New biologically active silver nanocomposites based on the copolymer of lup-20(29)-ene-3,28-diol 28-O-vinylbenzoate with N-vinylpyrrolidone were prepared by the borohydride method. The formation of spherical nanoparticles with a mean diameter of 67 nm was confirmed by scanning electron microscopy. The synthesized copolymers and silver nanocomposites exhibit cytotoxic activity and show promise for the development of new materials for medical purposes.     

Magnetic nanocomposites based on cyclodextrin-containing molecular tubes and iron nanoparticles

Stabilization of metallic nanoparticles may be achieved by the formation of their adducts with polymers and/or nanotubes of various chemical composition. Here, water-soluble nanotubes based on β-cyclodextrin (β-tubes) were used for entrapping of Fe nanoparticles obtained by the reduction of iron-containing precursors ([Fe₃(CO)₁₁H][Et₄N] cluster and FeSO₄). Using methods of light-scattering, viscometry, and isothermal diffusion measurements, it was shown that the adducts are associated in aqueous solutions. The presence of iron nanoparticles and the shape and size of adducts were verified by transmission electron microscopy. The adducts are long (up to 600 nm and longer), translucent associates consisting of denser walls and transparent cores. The width of nanotubes is ∼150 nm and the thickness of the wall 3–25 nm. Their magnetic properties were demonstrated by electron paramagnetic resonance method. The mechanism of self-assembly of the adducts is discussed.     

Antibacterial and biocompatible surfaces based on dopamine autooxidized silver nanoparticles

A facile and green method is proposed to immobilize silver nanoparticles (AgNPs) showing antibacterial and biocompatible properties on surfaces of substrates. The adhesive and reductive polydopamine (Pdop) coating was applied on the substrates such as polyethylene, glass, poly(methyl methacrylate), and poly(lactic-co-glycolic acid) by simply dipping into dopamine solutions. AgNPs of 50–70 nm formed uniformly on the Pdop-coated surfaces after immersing in silver nitrate solution where the density of AgNPs was modulated by Pdop immobilization time. Antibacterial efficacy, lactate dehydrogenase assay, and cell morphology observed by microscopy indicated that the as-prepared AgNPs deposited on Pdop/substrates possessed effective biocidal properties and did not inhibit the growth of L-929 cells mouse fibroblasts. The proposed method can be easily applied on different substrates and revealed good biocompatibility, which could be further developed for applications in biomaterials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

A SERS-active system based on silver nanoparticles tethered to a deposited silver film

A series of SERS-active nanostructures were produced by exposing a freshly deposited silver film (fabricated to be as free from roughness as practicable) to a solution containing a mixture of 1-decanethiol (m) and 1,9-nonanedithiol (d) of varying concentrations of m to d, then allowing colloidal silver nanoparticles to interact with the surface. Silver nanoparticles were found to bind exclusively to films which were prepared from solutions with a nonzero concentration of the dithiol implying that the nanoparticles were tethered to the silver surface by the dithiol with one of the thiolate groups bound to the nanoparticle and the other to the silver film. Intense SERS spectra were observed even from samples in which the m/d concentration ratio was so large that the adsorbed molecules in the vicinity of only approximately 8 +/- 3 nanoparticles were illuminated by the diffraction-limited focused laser beam. At such high dilution, the molecules (numbering at most approximately 330) residing in the SERS "hot spots" associated with the approximately 8 nanoparticles consisted primarily of m (although, of course, for each nanoparticle, at least one molecule in the hot spot had to be d to serve as the linker). This was corroborated by the SERS spectra. An analysis is presented, which accounts for the fact that as the concentration ratio of m/d increases, the SERS intensity associated with bands belonging to m first increases to a maximum then decreases. The nanoparticle-metal film system presented here is a simple embodiment of a more general range of SERS-active sensing platforms in which a molecular tether is used to create a SERS hot spot that (although nanosized) is large enough to accommodate analyte molecules that cannot themselves function as linkers, which are subsequently detected by SERS at the few-molecule level.     

Metallopolymer nanocomposites based on platinum nanoparticles for chemical fuel cells

Platinum nanoparticles were synthesized by radiation chemical reduction in solutions of reverse micelles for the modification of Nafion films. The effect of the degree of solubilization and sizes of water pools of micelles on nanoparticle formation was shown. The platinum nanoparticle size in the polymer matrix does not exceed 10 nm.     

Graphene nanofl akes and hybrid nanocomposites with gold and silver nanoparticles: optical and thermal properties

Russian Chemical Bulletin - New technologies for the preparation of graphene nanofl akes (GNF) with noble metal nanoparticles (NPs), specifi cally Au and Ag, as well as hybrid nanocomposites...     

Shape memory hybrid based on polyvinyl alcohol and 0D silver nanoparticles

Shape memory hybrids (SMH) have drawn significant attention because they allow an easy alternative for the design of shape memory materials with tailored properties or features. In this work, a shape memory hybrid was made, based on polyvinyl alcohol (PVA) as the elastic domain and 0D silver nanoparticles (Agnps) as the transition domain, a dissolution method of mixing both components, and evaporation of water afterward allowed the formation of films of the hybrid material. Two different size distributions of silver nanoparticles were used (13.7 ± 2.6 and 67.9 ± 14.1 nm), in order to study the effect of the size on the shape memory effect (SME) of the final SMH, under temperature stimuli. The materials obtained were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy, infrared spectroscopy (IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. The crystallinity of PVA was slightly altered with the addition of Agnps. Finally, the shape memory effect was tested on both hybrid materials, resulting in a better response to temperature for the SMH prepared with Agnps of 68 nm, also the shape recovery time can be tuned varying both the increase of temperature and the size distribution of Agnps used.     

Electrophysical properties of nanocomposites based on poly(p-xylylene) and copper nanoparticles

Poly(p-xylylene)-based nanocomposites containing various amounts of copper have been prepared by vacuum codeposition on a cooled substrate. On the basis of the relationship between the electrical conductivity of composites and the volume content of copper, the percolation threshold has been estimated as 10%. This value coincides with the corresponding parameter derived from the concentration dependence of the electrical resistance temperature coefficient. It has been shown that the conductivity of the nanocomposites increases with the moisture content and their moisture sensitivity decreases with an increase in the content of copper from a concentration of 4%. An analysis of the kinetics of the sensor response measured for various moisture contents has shown that the capacity structure of the samples rearranges during adsorption of water. According to the advanced model, the value of the sensor response is determined by a reduction in the height of the potential barrier between nanoparticles and a change in the fractal characteristics of nanocomposites that results from the adsorption of water molecules.     

Novel silver/polyurethane nanocomposite by in situ reduction: Effects of the silver nanoparticles on phase and viscoelastic behavior

A novel silver/poly(carbonate urethane) nanocomposite was prepared through in situ reduction of a silver salt (AgNO₃) added to a solution consisting of a commercial poly(carbonate urethane) dissolved in N,N‐dimethylformamide (DMF). In this system, the presence of the poly(carbonate urethane) was proved to protect the silver nanoparticles, whose formation was confirmed by means of UV–vis spectroscopy, from aggregation phenomena. The silver morphology developed in the solid state after DMF casting was imaged by FESEM. Homogeneous dispersion of silver nanoprisms in the poly(carbonate urethane) matrix was clearly observed. The effects of dispersion of silver nanoparticles within the poly(carbonate urethane) matrix were investigated by means of ATR‐FTIR and multifrequency dynamic mechanical thermal analyses. The obtained results revealed that the presence of silver nanoparticles modifies both the phase and the viscoelastic behaviors of poly(carbonate urethane). As a matter of fact, the hydrogen bond formation in the hard and soft segments was found to be hindered and the molecular motions of the soft segments were restricted, because a comparatively higher activation energy was required for the related α‐relaxation process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 344–350, 2008     

Novel antibacterial hybrid materials based on polyvinyl alcohol and mercaptopropyltriethoxysilane with embedded silver nanoparticles (PVA/AgNps/MPTES)

Hybrid materials based on polyvinyl alcohol (PVA) and mercaptopropyltriethoxysilane (MPTES) with embedded silver nanoparticles (AgNps) have been synthesized via a sol–gel method. Silver nanoparticles were obtained via thermal reduction in the presence of PVA as a stabilizer and reducing agent. The formation of silver nanoparticles within the PVA/MPTES matrix was proven by FTIR, XRD, and TEM analysis. The antibacterial activity of PVA/AgNps/MPTES materials was determined against strains belonging to Gram-positive and Gram-negative bacteria by disk diffusion and growth curve methods. The hybrid materials showed high antibacterial activity, which depends on the concentration of the silver nanoparticles.     

Preparation and optical properties of composite materials based on polybenzimidazole and silver nanoparticles

Rigid-chain heat resistant polymers (with poly-2,2'-p-oxydiphenylene-5,5′-bisbenzimidazole as example) were impregnated for the first time with a silver-containing precursor in formic acid and in supercritical carbon dioxide. A procedure allowing the precursor reduction to silver nanoparticles both throughout the volume by thermal annealing of the films in the temperature interval 100–150°С and in the targeted mode using lasers operating at 405 and 532 nm was developed. It opens prospects for developing a process for production of heatresistant optical gratings and light guides. The reduces nanoparticles and their agglomerates have the size in the interval 50–200 nm and give a plasmon band in the range 450–460 nm.     

Structure and photocatalytic properties of materials based on titanium dioxide and silver nanoparticles

Phase composition and structure of mesostructured materials, titanium dioxide and titanium dioxide modified with silver nanoparticles, have been studied by X-ray diffraction analysis. Introduction of Ag(I) ions into the initial composition and variation of the annealing temperature over the 500–950°C range allows controlling the anatase to rutile crystal phase ratio in the samples. The photocatalytic activity of TiO₂ and TiO₂/Ag samples has been demonstrated using the methyl orange degradation reaction. The catalytic properties of the materials have been found to depend on the anatase to rutile phase ratio and on the presence of silver nanoparticles.     

Novel biogenic silver nanoparticles used for antibacterial effect and catalytic degradation of contaminants

Research on Chemical Intermediates - The study reports a versatile, cost-efficient and ecofriendly protocol for the synthesis of biogenic silver nanoparticles (AgNPs) using the aqueous extracts of...     

Metal-enhanced fluorescent probes based on silver nanoparticles and its application in IgE detection

In this paper, a novel metal plasmon coupled with an aptamer–nucleotide hybridized probe was fabricated and applied for protein detection. The specific aptamer and single-strand oligonucleotide were chemically bound to silver nanoparticles (AgNPs), and Cy5-labeled, complementary single-strand oligonucleotides were hybridized with the particle-bound oligonucleotides. The hybridized DNA duplexes were regarded as rigid rods that separated the fluorophore Cy5 and the surface of AgNPs to reduce the competitive quenching. Using a model system comprising human immunoglobulin E (IgE) as the analyte and goat antihuman IgE as immobilized capture antibody on glass slides, we demonstrate that the detection performance of the synthetic probe was superior to the aptamer-based fluorescent probes. The results showed a good linear correlation for human IgE in the range from 10 ng/ml to 6.25 μg/ml. The detection limit obtained was 1 ng/ml, which was 50 times lower than that using Cy5 oligonucleotide/aptamer hybrid duplex (Probe2) due to the metal-enhanced fluorescence effect. This new strategy opens the possibility for the preparation of high-sensitivity detection probes based on metal nanoparticles.     

An electrochemical biosensor for nitric oxide based on silver nanoparticles and hemoglobin.

A nitric oxide (NO) biosensor based on silver nanoparticles was fabricated with high sensitivity and selectivity as well as stability. Silver nanoparticles could preserve the microstructures of hemoglobin, but the electrochemical reactivity of the protein and its detection sensitivity toward NO could be greatly enhanced. Accordingly, a NO biosensor was developed. The linear concentration range was from 1.0 x 10(-6) to 5.0 x 10(-5) M. Its detection limit was 3.0 x 10(-7) M with a sensitivity of 0.0424 microA microM(-1) NO. The possible co-existing compounds would not interfere with the detection.