The effect of diffusion on nanoaerosol filtration through porous materials with allowance for desorption processes

The effects of the finite residence time of aerosol particles in the bound state and their detachment due to thermal fluctuations on the filtration efficiency of porous and fibrous materials have been investigated with allowance for longitudinal diffusion in a flow. It has been shown that the desorption of particles affects the filtration efficiency even at times shorter than residence time τ_d of the particles in the bound state, while, at t ? τ_d, filtration stops. Allowance for the diffusion of aerosol particles in the flow leads to a decrease in the filtration efficiency as compared with the calculations performed without taking into account the longitudinal diffusion.     

Efficiency of inertial deposition of aerosol particles in fibrous filters with regard to particle rebounds from fibers

The inertial deposition of submicron aerosol nanoparticles onto fibers during gas filtration through fine-fiber filters is considered. It is shown that there is critical filtration velocity U* below which the energy loss upon collisions has no influence on the filtration efficiency. Above this critical velocity, the filtration efficiency depends on the mechanism of the inelastic energy loss and can be noticeably lower than the result of its estimation with no allowance for the particle rebound. For a rather dense fibrous medium, when not all particles that have rebounded from a fiber have time to attain the flow velocity before the next collision with another fiber, the filtration efficiency depends on the velocity distribution of the rebounding particles. It is shown that, in this case, the filtration efficiency must increase with the packing density of a filter.     

Nanoaerosol Filtration with Fine-Fiber Polydisperse Filters

The self-consistent theory of nanoaerosol filtration has been considered at small Peclet numbers. It has been shown that, at Pe < 1, it is necessary to consider the deposition of particles simultaneously on thePe < entire ensemble of fibers. Only at can the filtration efficiency be found from the collection efficiencies calculated separately for each fiber. The self-consistent theory has been used to estimate the efficiencies of filtration with polydisperse fibrous filters. The penetrations of particles through filters with different variances of the functions of fiber length distribution over fiber radii have been compared at a constant packing density or a constant total length of all fibers. It has been shown that, at a constant packing density, a rise in the variance leads to a decrease in the filtration efficiency, while, at a constant total fiber length, the efficiency is almost independent of the width of the distribution function.     

Molecular exchange through the vesicle membrane of siloxane surfactant in water/glycerol mixed solvents

The effect of glycerol on the permeability of vesicle membranes of a siloxane surfactant, the block copolymer polyethyleneoxide-b-polydimethylsiloxane-polyethyleneoxide, (EO)15-(DMS)15-(EO)15, was studied with freeze-fracture transmission electron microscopy (FF-TEM) and pulsed-field gradient nuclear magnetic resonance (PFG-NMR) spectroscopy. The FF-TEM results show that, in pure water, the surfactant can form small vesicles with diameters of less than 25 nm, as well as a few multilamellar vesicles with diameters larger than 250 nm. Gradual substitution of water with glycerol to a glycerol content of 40% leads to significant structural transformations: small vesicles are gradually swollen, and large multilamellar vesicles disappear. A glycerol content of 60% results in the complete disintegration of the vesicles into membrane fragments. PFG-NMR measurements indicate that the vesicle membrane does not represent an effective barrier for water molecules on the NMR time scale; hence, the average residence time of water in the encapsulated state is below tau b = 2 ms. In contrast, the average residence time of glycerol molecules in the encapsulated state can be as large as tau b = 910 ms. The permeability of the vesicle membrane increases with increasing glycerol concentration in the solvent: At a concentration of 40%, the residence time tau b is lowered to approximately 290 ms. After vesicle destruction at higher glycerol concentrations, a small glycerol fraction is still bound by membrane fragments that are formed after the disintegration of the vesicles.     

Ciprofloxacin-protected gold nanoparticles

The antibacterial drug ciprofloxacin (cfH) has been used to protect gold nanoparticles of two different mean diameters, 4 and 20 nm. The protection is complete with about 65 and 585 cfH molecules covering 4 and 15 nm particles, respectively. The nature of binding has been investigated by several analytical techniques. The nitrogen atom of the NH moiety of piperazine group binds on the gold surface, as revealed by voltammetric and spectroscopic studies. The cfH-adsorbed particles are stable in the dry state as well as at room temperature, and as a result, redispersion is possible. The rate of release of the drug molecule from the nanoparticles is more in the basic medium than in pure water, and the kinetics depend on the size of the particle; faster desorption is seen in smaller particles. The bound cfH is fluorescent, and this property could be used in biological investigations. This study shows that metal nanoparticles could be useful carriers for cfH and fluoroquinolone molecules. Most of the bound molecules could be released over an extended period of time.     

Acyclovir-Loaded Chitosan Microspheres for Gastroretention: Development and Evaluation

Mucoadhesive chitosan microspheres of acyclovir were prepared to prolong the gastric residence time using simple emulsification phase separation technique. The particle morphology of drug-loaded formulations was measured by SEM and the particle size distribution was determined using an optical microscope. The release profile of acyclovir from microspheres was examined in simulated gastric fluid (SGF pH 1.2). The particles were found to be discreet and spherical with the maximum particles of an average size (31.62 ± 4.64). The entrapment efficiency was found to be in the range of 40.24 to 67.29%. The concentration of the glutaraldehyde (25%v/v) as a cross-linker 2 ml and drug polymer ratio of 1:2 caused an increase in the entrapment efficiency and the extent of drug release. The optimized chitosan microspheres were found to possess good bioadhesion (79.89 ± 1.01%). The gamma-scintigraphy study showed the gastric residence time of more than 6 hours which revealed that optimized formulation could be a good choice for gastroretentive systems.     

Pressure and concentration profiles in filter cake consisting of core/shell latex particle

Poly(styrene-co-acrylic acid) latex particles with different acrylic acid contents have been synthesized and used for filtration studies. Effective pressure and dry matter concentrations were measured at different positions in the filter cakes during the filtration processes, and dry matter concentration was not found to change significantly with effective pressure. Nevertheless, the local dry matter concentration did increase with time for latex particles containing 1 and 3%, w/w acrylic acid, which indicate that filter cake comprising latex particles with a high acrylic acid content will creep during the filtration stage. The filter cakes were examined using stepped-pressure filtration experiments as well, and an almost instantaneous deformation of the filter cake was observed after the pressure step. Furthermore, a minor deformation was observed over the following 2 h for latex particles both containing and not containing acrylic acid. This is thought to be due to the rearrangement of particles in the filter cake.     

Continuous synthesis of CdSe-ZnS composite nanoparticles in a microfluidic reactor

ZnS-coated CdSe composite particles have been continuously synthesized in a microfluidic reactor. By using this system, CdSe particles and a ZnS coating can be produced in sequence, and the particle size and layer thickness can be directly adjusted by the residence time. It demonstrated that the continuous synthesis in the microreactor was a simple and efficient way to prepare composite particles with different structures and determine the optimized experimental conditions.     

同向啮合双螺杆挤出机挤出过程的计算机模拟

计算机模拟研究了聚苯乙烯在TSE-35A型同向啮合双螺杆挤出机的挤出过程.计算得到不同喂料速率与不同转速下的停留时间分布,并与在线荧光法测量值对比,二者基本相符.确定了停留时间与螺杆转速及喂料速率之间的函数关系式.模拟结果还预测了喂料速率、螺杆转速等工艺参数对双螺杆内流场变量,如温度、填充率、压力及粘度等的影响.模拟计算有助于了解双螺杆挤出机内部聚合物材料流动状态及停留时间长短,从而指导实际聚合物生产.     

Effect of reactor residence time distribution on the size distribution of polymer particles made with heterogeneous Ziegler-Natta and supported metallocene catalysts. A generic mathematical model

A generic mathematical model for analyzing the effect of ideal and non-ideal reactor residence time distributions on the size distribution of polymer particles produced with heterogeneous Ziegler-Natta and supported metallocene catalysts was developed. It was shown that the residence time distribution in polymerization reactors can have a significant effect on the size distribution of polymer particles and this can lead to imperfect replication of the catalyst particle size distribution.     

Study of Retention Ability of Nucleopore Membranes

The influence of pore sizes of nucleopore membranes and their shapes on the retention of polystyrene particles of 40–100 nm in size was studied. The interrelation between structural parameters of the nucleopore membranes found by various methods and the efficiency of filtration of calibrated particles were analyzed. The potential and limitations of the procedure for determining the efficiency of filtration of nanosized latex particles was demonstrated; the procedure was based on UV absorption spectroscopy.     

Some Aspects of Magnetic Filtration Theory for Removal of Fine Particles from Aqueous Suspensions

The magnetic filtration theory was evaluated to intensify the filtration of industrial fluids by magnetic filters. Effects of filtration velocity and external magnetic field intensity on filter performance were investigated and the dependence of the logarithmic efficiency coefficient on filtration velocity was questioned. It was concluded that change in the magnetic susceptibility of the dispersion particles, caused by external magnetic field, and change in the flow rate properties of the liquid alongside the filter pores are the most essential factors to be considered in the design, development, and modeling of magnetic filtration systems in various industrial areas.     

Effect of Surfactants on the Particle Capture Mechanism in an Electromagnetic Filter

In this article, effects of the parameters of the filtration process and surfactants on the effectiveness of the separation of particles have been investigated. Water samples containing corrosion particles (rust) of low concentrations were mixed with a typical domestic type of detergent passed through an electromagnetic filter. It was found that the capturing capacity of the particles in the filter increased as the external magnetic field, filter length and the detergent concentration of the suspension increase, but the increase in diameter of the filter elements gave an opposite effect. Furthermore, it was recorded that the pH value of the suspension changes the efficiency of magnetic filter.     

Preparation of airborne Ag/CNT hybrid nanoparticles using an aerosol process and their application to antimicrobial air filtration

Carbon nanotubes (CNTs) have been widely used in a variety of applications because of their unique structure and excellent mechanical and electrical properties. Additionally, silver (Ag) nanoparticles exhibit broad-spectrum biocidal activity toward many different bacteria, fungi, and viruses. In this study, we prepared Ag-coated CNT hybrid nanoparticles (Ag/CNTs) using aerosol nebulization and thermal evaporation/condensation processes and tested their usefulness for antimicrobial air filtration. Droplets were generated from a CNT suspension using a six-jet collison nebulizer, passed through a diffusion dryer to remove moisture, and entered a thermal tube furnace where silver nanoparticles were generated by thermal evaporation/condensation at ～980 °C in a nitrogen atmosphere. The CNT and Ag nanoparticle aerosols mixed together and attached to each other, forming Ag/CNTs. For physicochemical characterization, the Ag/CNTs were introduced into a scanning mobility particle sizer (SMPS) for size distribution measurements and were sampled by the nanoparticle sampler for morphological and elemental analyses. For antimicrobial air filtration applications, the airborne Ag/CNT particles generated were deposited continuously onto an air filter medium. Physical characteristics (fiber morphology, pressure drop, and filtration efficiency) and biological characteristics (antimicrobial tests against Staphylococcus epidermidis and Escherichia coli bioaerosols) were evaluated. Real-time SMPS and transmission electron microscopy (TEM) data showed that Ag nanoparticles that were <20 nm in diameter were homogeneously dispersed and adhered strongly to the CNT surfaces. Because of the attachment of Ag nanoparticles onto the CNT surfaces, the total particle surface area concentration measured by a nanoparticle surface area monitor (NSAM) was lower than the summation of each Ag nanoparticle and CNT generated. When Ag/CNTs were deposited on the surface of an air filter medium, the antimicrobial activity against test bacterial bioaerosols was enhanced, compared with the deposition of CNTs or Ag nanoparticles alone, whereas the filter pressure drop and bioaerosol filtration efficiency were similar to those of CNT deposition only. At a residence time of 2 h, the relative microbial viabilities of gram-positive S. epidermidis were ～32, 13, 5, and 0.9% on the control, CNT-, Ag nanoparticle-, and Ag/CNT-deposited filters, respectively, and those of gram-negative E. coli were 13, 2.1, 0.4, and 0.1% on the control, CNTs, Ag nanoparticles, and Ag/CNTs, respectively. These Ag/CNT hybrid nanoparticles may be useful for applications in biomedical devices and antibacterial control systems.     

Special features of filtration of heavy particles with fine-fiber materials

The excitation of elastic vibrations of fibers upon inertial deposition of submicron aerosol particles in the course of gas filtration through fine-fiber filters has been considered. Equations describing the dynamics of the interaction of several aerosol particles with a fiber have been derived. It has been shown that, in the case of heavy particles and long fibers, particles that have been previously deposited onto the fibers can be knocked-out upon an impact of a fast particle. Moreover, it has been demonstrated that fast particles can penetrate through traps consisting of several fibers due to the deformation of the latter. All these processes may have a substantial effect on the filtration performance in the inertial regime.     

Deposition efficiency of fractal-like aggregates in fibrous filters calculated using Brownian dynamics method

Nonspherical particles, such as fractal-like aggregates emitted by diesel engines, are commonly met in the ambient air. Some of them are believed to be carcinogenic to humans, thus their efficient removal is of crucial practical importance. A fibrous filter is the device commonly used for aerosol purification but the literature lacks experimental data concerning aggregates filtration. Effect of aggregates' parameters (fractal dimension, primary particle radius) as well as fiber diameter and air velocity on the filtration efficiency is investigated theoretically using the modified Brownian dynamics method. Three different expressions for the friction coefficient evaluation for the aggregates were examined. The results obtained indicate that structure of an aggregate, filter structure and process conditions strongly influence the aggregates deposition efficiency, which significantly differs from the values determined for mass-equivalent spherical particles. The results determined using the Brownian dynamics approach were compared with the values calculated using classical single fiber theory and noticeable discrepancy was observed for the most penetrating particles, while both approaches agree for the limiting cases of small or large particles. Peclet number based on the mobility radius and the interception parameter based on the outer radius are the proper criteria to describe diffusional and deterministic deposition of aggregates.     

Analysis of constant permeate flow filtration using dead-end hollow fiber membranes

Dead-end filtration of colloids using hollow fibers has been analysed theoretically and experimentally. A mathematical model for constant flux filtration using dead-end hollow fiber membranes has been developed by combining the Hagen–Poiseuille equation, the (standard) filtration equation, and cake filtration theory of Petsev et al. [D.N. Petsev, V.M. Starov, I.B. Ivanov, Concentrated dispersions of charged colloidal particles: sedimentation, ultrafiltration and diffusion, Colloid Surf. A: Physicochem. Eng. Aspects, 81 (1993) 65–81.] to describe the time dependence of the filtration behavior of hollow fiber membranes experiencing particle deposition on their surface. Instead of using traditional constitutive equations, the resistance of the cake layer formed by the deposited colloids has been directly correlated to the cake structure. This structure is determined by application of a force balance on a particle in the cake layer combined with the assumption that an electrostatically stable cake layer of mono-sized particles would be ordered in a regular packing geometry of minimum energy. The developed model has been used to identify the relationship between the filtration behavior of the hollow fiber membrane and the particle properties, fiber size, and imposed average flux. Filtration experiments using polystyrene latex particles of relatively narrow size distribution with a single dead-end hollow fiber membrane demonstrate good consistency between experimental results and model prediction. The developed model has been used to simulate the distribution of the cake resistance, transmembrane pressure, and flux along the hollow fiber membrane and used to assess the effect of fiber size, particle size, zeta potential, and the average imposed flux on the suction pressure-time profiles, flux, and cake resistance distributions. These results provide new insights into the filtration behavior of the hollow fiber membrane under constant flux conditions.     

NMR Study on Polymer-Solvent Interactions during Temperature-Induced Phase Separation in Aqueous Polymer Solutions

Some possibilities of NMR spectroscopy (mainly spin-spin relaxation) in investigations of hydration and other polymer-solvent interactions during the temperature-induced phase separation in aqueous polymer solutions are described. A certain portion of water molecules bound in phase-separated mesoglobules was revealed. The residence time of the bound HDO for poly(vinyl methyl ether) (PVME)/D₂O solution (c = 6 wt%) is 1.2 ms. With time a slow release of originally bound water from the respective mesoglobules was observed. For highly concentrated PVME/D₂O solutions (c = 20–60 wt%), the residence time of bound HDO ≫ 2.7 ms and fractions of bound water unchanged even for 70 h were found. A similar behaviour as described above for water (HDO) was also found for EtOH molecules in PVME/D₂O/EtOH solutions.     

Heat‐Free Biomimetic Metal Molding on Soft Substrates

Fabrication of bio‐templated metallic structures is limited by differences in properties, processing conditions, packing, and material state(s). Herein, by using undercooled metal particles, differences in modulus and processing temperatures can be overcome. Adoption of autonomous processes such as self‐filtration, capillary pressure, and evaporative concentration leads to enhanced packing, stabilization (jamming) and point sintering with phase change to create solid metal replicas of complex bio‐based features. Differentiation of subtle differences between cultivars of the rose flower with reproduction over large areas shows that this biomimetic metal patterning (BIOMAP) is a versatile method to replicate biological features either as positive or negative reliefs irrespective of the substrate. Using rose petal patterns, we illustrate the versatility of bio‐templated mapping with undercooled metal particles at ambient conditions, and with unprecedented efficiency for metal structures.     

Estimation of a potential contribution of bed-structure regularization to adsorber downsizing in adsorption gas separation

Five similarity criteria for adsorption systems have been formulated as follows: (1) the ratio of the adsorber length to the thickness of the front; (2) the adsorber output; (3) the relative molar density of the adsorbate at the adsorber inlet; (4) the ratio of the grain saturation time to the residence time of a grain in the front zone; and (5) the Peclet number, composed of the filtration rate, specific size of the filtration area (grain radius or half-width of gaps between sheets), and molecular diffusion coefficient. The values of these criteria change with modification of the tortuosity of transport nanopores. Simple mathematical analysis has shown that the adsorber volume decreases in proportion to the decrease in the nanopore tortuosity induced by bed-structure regularization. The pressure drop through the adsorber, as well as power consumption, will remain unchanged.