Effect of in and Zn additives on some thermal properties of a-Se

In the present work, the effect of In and Zn on some thermo–physical properties (thermal conductivity, diffusivity and specific heat per unit volume) of amorphous Se (a-Se) have been studied. For this, simultaneous measurements of effective thermal conductivity (λ_e) and effective thermal diffusivity (χ_e) are used at room temperature for twin pellets of Se, Se₉₀In₁₀ and Se₉₀Zn₁₀ alloys using transient plane source (TPS) technique. It has been found that In and Zn additives changes significantly the values of thermo-physical properties (thermal conductivity, diffusivity and specific heat per unit volume) of a-Se studied in the present work. The results have been analyzed in terms of average bond strength and effective molecular weight of the binary alloys.     

Synthesis,structural, photophysical and thermal properties of some praseodymium(III) complexes

Some carboxylato-bridged praseodymium(III) complexes (1–5) having tp [hydrotris(pyrazol-1-yl)borate] and sodium p-X-benzoate (where X =?H, F, Cl, NO₂) have been synthesized and characterized by different techniques including X-ray crystallography. The X-ray studies demonstrated that 1, 3 and 5 crystallized in triclinic space group P 1 with cell dimensions a =?11.761(13) Å, b =?12.536(13) Å, c =?17.726(19) Å for 1, a =?9.309(8) Å, b =?12.667(11) Å, c =?14.421(12) Å for 3, a =?11.5688(9) Å, b =?12.0055(9) Å, c =?12.3005(10) Å for 5. In 1–4 the coordination number of praseodymium is seven, whereas in 5 it is eight. IR suggested that the benzoate groups in 1–5 are bidentate bridging. The photophysical properties of these complexes have been studied in solution at room temperature. Thermogravimetric analysis showed that these complexes undergo complete decomposition with formation of praseodymium oxide.     

Physical properties (thermal,thermomechanical, magnetic,and adhesive) of some smart orthodontic wires

Thermal, thermomechanical, and caloric properties of commercial orthodontic wires (produced by Natural Orthodontics Corp., USA) with cylindrical and rectangular geometry were studied. Depending on the applied forces, there were identified the range of elasticity, the elasticity–viscoelasticity coexistence domain and the domain in which a maximum force of 18 N is applied, for the orthodontic wires. When increasing the thickness of orthodontic wires, deformation decreases. The Controlled Force Module, in the tension mode, was used for the determination of the orthodontic wires elongation at application of the stretching forces from 0 to 13 N, at 35 °C, maintaining each static force value for 3 min. The increase in the cross-sectional area of the orthodontic wires disfavors the process of elongation of the sample, at the same applied static force. Using the Multi-Frequency–Strain–Stress modulus, in the tension mode, DMA cyclic heating–cooling measurements were performed. The measured physical quantities for orthodontic wires were Storage Modulus, Loss Modulus, Tanδ and Stiffness, at heating and cooling. Thus, the characteristic temperatures of the phase transitions (A_s, A_f, M_s, M_f), of all the studied orthodontic wires were identified. Also, the values of the elasticity modulus (Young’s Modulus) of the orthodontic wires were calculated at 35 °C. With the DSC Q200 device, using temperature-modulated differential scanning calorimetry method, a multi-step temperature variation program, was applied to a rectangular wire, in three stages (cooling–heating–cooling). Through the interpretation of heat fluxes (reversible, irreversible and total), the phase transitions in the formation of martensite, austenite, but also of the rombohedral phase (R-phase), were identified. Formations of austenite and martensite were also evidenced by the classical DSC method, but the classical DSC method also enabled the R-phase identification. The adherence of some food dyes on the orthodontic wires, as well as the modification of the surface roughness of the orthodontic wire after the deposition of the food dye, was also studied. By magnetic measurements, it was established that the orthodontic wires had paramagnetic properties at room temperature, and nitinol was a mixture of 49.2% austenite and 50.8% martensite.

     

添加剂对PVDF膜结构和性能的影响

以亲水性的聚乙二醇(PEG)和聚乙烯吡咯烷酮(PVP)为添加剂,利用浸没沉淀相转化法制备聚偏氟乙烯(PVDF)多孔膜。利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、傅立叶-红外光谱仪(FT-IR)对所制得膜进行表征测试,分析了添加剂对膜孔结构、结晶度和膜性能的影响。结果表明:添加剂能有效改善膜的孔径结构,使得膜的微孔增多、孔间连通性增强、膜结晶度降低,达到提高膜的纯水通量和孔隙率的效果。     

Three novel Cd(II) coordination polymers: Synthesis,crystal structures,fluorescence and thermal properties

Three novel Cd(II) coordination polymers, {[Cd(C₄BIm)(N₃)(OAc)]·C₂H₅OH}_n (1), [Cd(C₄BIm)(H₂O)₃(SO₄)]_n (2) (C₄BIm = 1,4-bis(benzimidazolyl)butane) and [Cd(bbbm)_1.5(NO₃)₂]_n (3) (bbbm = 1,1′-(1,4-butanediy)bis-1H-benzimidazole) have been prepared and characterized spectroscopically and crystallographically. In polymer 1, C₄BIm–Cd chains and N₃–Cd chains criss-cross to a layer structure. Polymer 2 possesses a concave–convex chain structure. Polymer 3 exhibits a two-dimensional (2-D) rhomboid grid network, the dimensions of the grid is 25.807 × 13.771 Å, and the diagonal-to-diagonal distances are 28.608 × 21.145 Å. The fluorescence properties and the thermal stabilities of the three polymers were investigated.     

Ag(I), Cu(II), and Cd(II) sulfacetamide complexes: Synthesis,spectral, thermal study,and antimicrobial activity assessment

Sulfacetamide complexes of Ag(I), Cu(II), and Cd(II) were synthesized and characterized by the elemental analyses and IR and ¹H NMR spectra. Structural assessment revealed two modes of coordination in the sulfacetamide complexes, showing that sulfacetamide reacts as a bidentate ligand and coordinates to Ag(I) and Cd(II) through the amido and sulfonyl oxygens and to Cu(II) through the NH₂ nitrogen. Molar conductance measurements in DMSO showed that both the complexes are nonelectrolytes in nature, which allowed they to be assigned the formulas [Ag(SAM-Na)(NO₃)H₂O)]·3H₂O, [Cu(SAM-Na)₂(Cl)₂], and [Cd(SAM-Na)(Cl)₂]·10H₂O. The kinetic and thermodynamic parameters of the thermal decomposition reactions of the complexes were estimated from the TG/DTG curves by the Coats–Redfern and Horowitz–Metzeger methods. The surface morphology of sulfacetamide complexes was scanned using X-ray powder diffraction (XRD) and scanning electron microscope (SEM) analyses.     

Interference caused by indium in the atomization of Ag, Bi, Cd, Sn, and Tl in ETA-AAS

The depression of the signals for Ag, Bi, Cd, Sn, and Tl trace determination by ETA-AAS, which occurs in the presence of hydrobromic acid (with or without indium present), has been investigated by use of a new combined atomization equipment, molecular absorption measurements and thermodynamic calculations. The results show that all these elements form easily volatile bromides and more or less stable diatomic molecules of MBr type. These diatomic molecules, formed in the gaseous phase, are removed from the observation volume by diffusion, before their dissociation is complete. These two effects-formation of easily volatile compounds and stable diatomic molecules-are the main reasons for the depression of the atomic-absorption signals.     

Preparation,characterisation, infrared and thermal properties of some adducts of bis(8-hydroxyquinolinato)dioxouranium(VI)

Several adducts of the coordinatively unsaturated species UO₂(C₉H₆NO)₂ with 8-hydroxyquinoline, urea, aniline, methanol, 1,10-phenanthroline, pyridine and water were prepared and characterized. The infrared spectra of these compounds have been recorded and their particular thermal decomposition properties studied. Nitrogen donor ligands have been found to form adducts with UO₂(C₉H₆NO)₂ which are thermally more stable than those formed by oxygen donor ligands.     

Synthesis,spectroscopic and thermal properties of Pt(II) complexes of some polydentate ligands

The new tetradentate symmetrical (2R,2′S)-1,1′-piperazine-1,4-diyldipropane-2-thiol) (L¹), (2S)-1-[bis(2-aminoethyl)amino]propan-2-ol) (L²), and 2-{(E)-[((1R,2S)-2-{[(1Z)-(2-hydroxy phenyl)methylene]amino}cyclohexyl)imino]methyl}phenol (L³) ligands were synthesized and characterized on the basis of FT-IR, ¹H, ¹³C NMR, EI mass, and elemental analysis. Three commercially available ligands, (2,2′-[ethane-1,2-diylbis(thio)]diethanol (L⁴), 2,2′-dithiodiethanenamine (L⁵), and (2,2′-[ethane-1,2-diyldi(imino)] diethanol (L⁶), were also studied. Pt(II) complexes were characterized by FTIR, elemental analysis and thermal methods. Thermal behaviors of these complexes were investigated in the range 10–1000 °C. Magnetic properties were also studied, and the all complexes were found to be diamagnetic. The structures consist of the monomeric units in which the Pt(II) atoms exhibit square planar geometry. N,N′-bis(salicylidene)-1,2-cyclohexane has been synthesized and characterized by X-ray single crystal diffraction measurement. The ligand crystallizes in monoclinic crystal system and space group, Cc.     

Effect of some additives on the reactions in fly ASH-Ca(OH)2 system

Differential thermal analysis and thermogravimetry were used to evaluate the effect of some additives, such as CaSO₄, CaCl₂ and silica fume amorphous silica from ferrosilicon synthesis on the mechanism and kinetics of reactions occurring in fly ash-Ca(OH)₂ system. The accelerating role of these additives was demonstrated from the data relating to Ca(OH)₂ consumption in hydrated pastes, determined by TG measurements. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of magnetic nanoparticles on the thermal properties of some hydrogels

Magnetic hydrogels (ferrogels) based on poly(vinyl alcohol) (PVA) and poly(hydroxyethyl methacrylate) (PHEMA) with magnetite (Fe₃O₄) nanoparticles were prepared. PVA ferrogels were synthesised by submitting the aqueous solution of polymer and Fe₃O₄ to freezing-thawing (F-T) cycles yielding a physical gel. Different samples were prepared by varying (i) the concentration of PVA, (ii) the concentration of magnetite and (iii) the number of F-T cycles applied. PHEMA ferrogels were prepared by a crosslinking polymerization reaction in the presence of magnetite yielding chemical gels. Different samples were prepared by varying (i) the concentration of HEMA, (ii) the concentration of EGDMA and (iii) the concentration of magnetite nanoparticles. All ferrogel samples were first dried before been analysed in a thermogravimetric analyzer. The resulting thermograms showed that the concentration of magnetite nanoparticles does affect the thermal stability of either ferrogels system, a general improvement in comparison with PVA and PHEMA hydrogels, respectively, being observed. The apparent activation energy (E_a) of the thermal degradation for PVA ferrogels was evaluated and calculated applying the Flynn-Wall and the Kissinger methods. Values of apparent E_a increased with the content of Fe₃O₄ in the ferrogel sample.     

Influence of some lime-containing additives on the thermal behavior of urea

Urea is one of the main nitrogen fertilizers used in agriculture. But being well soluble in water, hardly 50% of its nitrogen is assimilated by plants. One possibility to eliminate this disadvantage is to use coating agents for modification of urea to obtain a controlled-realized fertilizer. The aim of this research was to study the influence of different lime-containing additives on the thermal behavior and decomposition kinetics of urea in oxidizing atmosphere. Commercial fertilizer-grade urea (46.4% N) and analytical-grade CaO, MgO, CaCO₃, MgCO₃ were used in the experiments. In addition, one Estonian limestone and one dolomite sample were used as additive or coating material. The experiments with a Setaram Setsys 1750 thermoanalyzer coupled to a Nicolet 380 FTIR Spectrometer by a heated transfer line were carried out under non-isothermal conditions up to 900 °C at the heating rate of 5 °C min^?1 and to calculate kinetic parameters, additionally, at 1, 2, and 10 °C min^?1 in the atmosphere containing 80% of Ar and 20% of O₂. The differential isoconversional method of Friedman was used to calculate the kinetic parameters. The results obtained indicate that thermooxidative decomposition of urea as well as the blends of urea with lime-containing materials and urea prills coated with limestone or dolomite powder follows a complex reaction mechanism.     

The Surface Tension and Density of Liquid Ag–Bi, Ag–Sn, and Bi–Sn Alloys

Summary. The sessile drop method has been used to measure density and surface tension for pure Ag, Bi, Sn, and their mixtures. For pure metals and Bi–Sn alloys negative temperature coefficients of surface tension have been obtained. In case of Ag–Bi and Ag–Sn alloys the temperature coefficients of surface tension take negative or positive values depending on composition. Experimental values of the surface tension for Ag–Bi, Ag–Sn, and Bi–Sn are compared with those computed from Butler’s model. A relatively good agreement is observed.     

Crystal structure,thermal and fluorescent properties of a 1D Cd(II) coordination polymer based on the bis(benzimidazole) ligand

A 1D cadmium (II) coordination polymer {[Cd₂(L)₃Cl₃]·Cl} _n (1) (L = 1,3-bis(benzimidazol-l-yl)-2-propanol) is synthesized by the hydrothermal reaction and characterized by elemental analysis, IR, TG, and X-ray single crystal diffraction. Compound 1 crystallizes in the hexagonal system, space group P63/m with a = 15.4857(11) Å, b = 15.4857(11) Å, c = 14.478(2) Å, γ = 120°, V = 3006.8(5) ų, Z = 2. In the structure of complex 1, each cadmium center is hexahedrally coordinated by three chlorine atoms and three nitrogen atoms of three distinct L ligands. A detailed analysis reveals that compound 1 exhibits a 1D chain of beads and the adjacent chains are further linked by C-H…Cl hydrogen bonding to form a 2D supramolecular framework. Furthermore, the solid-state fluorescent property of 1 is investigated at room temperature.     

Spectral, thermal, electrochemical and analytical studies on Cd(II) and Hg(II) thiosemicarbazone complexes

The coordination characteristic of the investigated thiosemicarbazones towards hazard pollutants, Cd(II) and Hg(II), becomes the first goal. Their complexes have been studied by microanalysis, thermal, electrochemical and spectral (electronic, IR and MS) studies. The substitutent (salicylaldehyde, acetophenone, benzophenone, o-hydroxy-p-methoxybenzophenone or diacetylmonoxime) plays an important role in the complex formation. The coordination sites were the S for thiosemicarbazide (HTS); NN for benzophenone thiosemicarbazone (HBTS); NS for acetophenone thiosemicarbazone (HATS) and salicylaldehyde thiosemicarbazone (H(2)STS); NNS or NSO for diacetylmonoxime thiosemicarbazone (H(2)DMTS). The stability constants of Hg(II) complexes were higher than Cd(II). The kinetic and thermodynamic parameters for the different thermal decomposition steps in the complexes have been evaluated. The activation energy values of the first step ordered the complexes as: [Cd(H(2)STS)Cl(2)]H(2)O>[Cd(H(2)DAMTS)Cl(2)]>[Cd(HBTS)(2)Cl(2)]2H(2)O>[Cd(HATS)(2)Cl(2)]. The CV of [Cd(H(2)STS)Cl(2)]H(2)O and [Hg(HBTS)Cl(2)] were recorded. The use of H(2)DMTS as a new reagent for the separation and determination of Cd(II) ions from water and some synthetic samples using flotation technique is aimed to be discussed.     

Influence of heteroligand complexation on the thermal, photoluminescent, and film-forming properties of some aromatic terbium(III) carboxylates

With homoligand TbL₃ and heteroligand complexes TbL₃(Q)_n (HL = HSal (salicylic acid) and HPA (2-anilinobenzoic acid); Q = TPPO (triphenylphosphine oxide) and TOPO (tri(n-octyl)phosphine oxide); n = 1 or 2) as examples, it was shown that heteroligand complexation affects not only the thermal and photoluminescent properties but also the quality of films obtained by centrifugation: the root-mean-square roughness changes in the order TbL₃Q > TbL₃(Q)₂ ≈ TbL₃. This is due to different association degrees of the complexes in solution, which was confirmed by MALDI-TOF MS data.     

Effect of nano‐polystyrene (nPS) on thermal,rheological, and mechanical properties of polypropylene (PP)

Polystyrene nanoparticles (nPS) in the range of 10–100 nm with spherical shape were synthesized by oil/water (o/w) microemulsion process. In this process ammonium persulfate (APS) as an initiator, sodium dodecyl sulphate as a surfactant and n‐pentanol as cosurfactant were used. Isolated nPS was characterized by FTIR and ¹H NMR spectroscopy. DSC studies of nPS showed higher T_g as compared to bulk PS. The effect of lower weight percentage (wt%) of nPS on the mechanical, rheological, and thermal properties of PP was investigated. The blends were prepared individually on brabender plastograph by incorporating nPS of ～60 nm with different wt% of loading (i.e., 0.10–0.5%). It was shown from the experimental results that thermal, rheological, and mechanical properties were increased as the polymer particles blended with PP. Blends with 0.25 wt% loading of nPS exhibit better properties compared with that of other wt% loadings. The improvements in properties were due to the close packing of PP chains as recorded by improvement in crystallinity of PP with the addition of nPS as shown by SEM. Copyright © 2010 John Wiley & Sons, Ltd.     

Atomization mechanism and determination of Ag,Be, Cd,Li, Na,Sn and Zn in uranium-plutonium matrices by ETA-AAS

The atomization processes involved in the Electrothermal Atomization-Atomic Absorption Spectrometric (ETA-AAS) determination of Ag, Be, Cd, Li, Na, Sn and Zn in the presence of an uranium-plutonium matrix containing 25% Pu have been investigated. The significant fall in the absorbance signal for Ag, Cd, Na and Zn in an uranium matrix and its restoration in the presence of plutonium is probably correlated with the change in the partial pressure of oxygen released from the matrix at/below the signal appearance temperature (T(app)). In case of Li and Sn, the signal remains unaffected irrespective of the U-Pu matrix which might be due to a high T(app) for these analytes. Regarding Be, the steep suppression of the signal in the presence of the plutonium matrix compared to an uranium matrix can be ascribed to the formation of stable Pu-Be compounds (PuBe(13)). Based on these studies, analytical procedures have been developed for the direct determination of nanogram amounts of these analytes in an U-Pu matrix with an average precision of 9% RSD.