嵌入花生酸镉单层中的卟啉-紫精分子聚集行为的研究

本文制备了卟啉-紫精与花生酸镉混合LB膜, 用紫外可见光谱研究了膜中卟啉基团的聚集及取向, X射线衍射说明混合LB膜具有层状有序的周期结构。扫描电镜结果表明: 通过调节膜的表面压可使聚集成"微畴"的卟啉-紫精均匀分布在花生酸镉单分子层中, 随膜表面压的增大, 小的"微畴"相互连接形成更大的"微畴"。电子衍射说明混合膜中两组份分相存在, 且都为六角对称的有序结构。     

2D "soap"-assembly of nanoparticles via colloid-induced condensation of mixed Langmuir monolayers of fatty surfactants

We describe a new type of colloidal 2D gels formed in mixed Langmuir monolayers of stearic acid and octadecylamine on a surface of gold hydrosol. The adsorption of gold nanoparticles on the mixed monolayer led to an increase of interactions between oppositely charged surfactants giving a "soap" of mixed fatty salt. The observed effect is equivalent to a virtual "cooling" of floating monolayer, which undergoes rapid condensation on a surface of aqueous colloid. The consequent shrinking and rearrangement of the monolayer resulted in aggregation of nanoparticles into colloidal 2D "soap"-gels, which represented arrested colloidal phases within nonadsorbing organic medium. When sequentially deposited onto solids by Langmuir-Blodgett technique, the 2D "soap"-gels separated into organic and colloidal phases and gave dendrite-like bilateral organic crystallites coated with gold nanoparticles. The reported colloidal "soap"-assembly can offer a new opportunity to design 2D colloidal systems of widely variable chemistry and structures.     

Photochemical Synthesis and Magnetic Property Investigation of a Mixed-valence 11-Tungstophosphate

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｄｕｃｅｄｈｅｔｅｒｏｐｏｌｙａｎｉｏｎｓ（ｈｅｔｅｒｏｐｏｌｙｂｌｕｅ）ａｒｅｏｆｃｏｎｔｉｎｕｉｎｇｉｎｔｅｒｅｓｔｉｎｓｏｍｅｉｍｐｏｒ－ｔａｎｔａｒｅａｓｏｆｃｈｅｍｉｓｔｒｙ，ｓｕｃｈａｓａｎａｌｙｔｉｃａｌａｎ...     

Thermal decomposition of mixed oxalates

The thermogravimetric analysis of several coprecipitated zinc-copper oxalates in nitrogen is reported. The thermal decompositions of these mixed oxalates show a separate single step for dehydration and decomposition in the mass loss versus temperature curve. It is found that the onset temperature decreases with composition. For example, it decreases from 380 for zinc oxalate to 260 for copper oxalate. The end-product is mixed oxides and copper metal. These studies indicate the formation of an interpenetrating structure or mixed crystals during coprecipitation. Rate parameters have been calculated for dehydration and decomposition.One of us (B. D. D.) is grateful to the University Grants Commission, New Delhi, India, for the award of a research fellowship.     

A study about pH chemically modified electrodes based on amino-derivatives of naphthalene

On the basis of the study of synergistic sensitizing effect of mixed ionic and nonionic surfactants on a series of color reactions, the synergistic effect of mixed solubilizers (or dispersing agents) was investigated. The systems examined included the mixture of a surfactant (either ionic and nonionic) with soluble macromolecular compounds (e.g. PVA or arabic gum) or with -cyclodextrin. The mixed solubilizers often performed synergism of solubilization, sensitization and stabilization on the systems studied, and for certain cases the selectivity was also improved.     

The controlling effect of pH on oxidation of Cr(III) by manganese oxide minerals

Effects of the subphase temperature on the surface pressure (pi)-area (A) isotherms of mixed monolayers of miltefosine (hexadecylphosphocholine), a potential anticancer drug, and cholesterol were investigated at the air/water interface, which were supplemented with Brewster angle microscopy (BAM) observations. Comparison of the collapse pressure values, mean molecular areas, excess areas and excess free energy of mixing between the mixed monolayer at various molar ratios and the pure component monolayers showed that, regardless of the subphase temperature, the investigated miltefosine-cholesterol system is much more stable than that the pure component monolayers, suggesting strong attractive interactions between miltefosine and cholesterol in mixed monolayers. As a consequence, it was postulated that stable "complexes" of the two components could form at the interface, for which stoichiometry may vary with the subphase temperature. Such "surface complexes" should be responsible for the contraction of the mean molecular area and thus the high stability of the mixed monolayer.     

Solid state chemical ionization for characterization of organic compounds by laser mass spectrometry

A new technique involving the addition of a compound to the analyte to serve as a source of "reagent" ions has been developed for negative-ion laser mass spectrometry. This "solid state chemical ionization" leads to ions characteristic of the analyte, owing to ion-molecule reactions between the "reagent" ion and the neutral analyte in the laser-generated plume. Polycyclic aromatic hydrocarbons show formation of an ion corresponding to (M + O - H)(-) in their negative-ion laser mass spectra when mixed with compounds such as sym-trinitrobenzene, sodium nitrate and sodium peroxide. NO(-)(2), O(-), and O(-)(2) serve as "reagent" ions in these compounds. Formation of (M + Cl)(-) is seen in the laser mass spectra of glycosides mixed with hexachlorobenzene. Chloride serves as the "reagent" ion in this case.     

The preparation and characterization of nanostructured TiO2-ZrO2 mixed oxide electrode for efficient dye-sensitized solar cells

The preparation of nanostructured mixed metal oxide based on a sol-gel method with surfactant-assisted mechanism, and its application for dye-sensitized solar cell (DSSC) are reported. The mixed zirconia (ZrO₂) and titania (TiO₂) mesoporous powder possessed larger surface area than the corresponding titania. For the UV action spectra of unsensitized photochemical cell, the mixed zirconia/titania electrode can absorb UV light below 380 nm, corresponding to band gap (E_g) around 3.27 eV, which is higher than that of pure component of titania (). Both of these improved properties, i.e., BET surface area and band gap, contributed to the improvement on a short-circuit photocurrent up to 11%, an open-circuit voltage up to 4%, and a solar energy conversion efficiency up to 17%, for the DSSC fabricated by mesoporous zirconia/titania mixed system when compared to the cell that was fabricated only by nanostructured TiO₂. The cell fabricated by 5 μm thick mixed TiO₂-ZrO₂ electrode gave the short-circuit photocurrent about 13 mA/cm², open-circuit voltage about 600 mV and the conversion efficiency 5.4%.     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.     

Mixed metal hydroxycarboxylic acid complexes. Spectrophotometric study of complexes of U(VI) with In(III), Cu(II), Zn(II) and Cd(II)

The formation of mixed metal complexes between uranium (VI), as the central metal ion, and aluminium (III), indium (III), copper (II), zinc (II) and cadmium (II), as the additional metal ions, with a hydroxycarboxylic acid chosen between citric, tartaric or malic, has been studied using spectrophotometric methods.The effect of pH has been examined, and the results show that at pH=4 stable complexes are formed for most of the systems. At this pH the method of mole ratio and Job's method of continuous variations, were employed to determine the stoichiometry of the mixed metal complexes. Al(III), In(III) and Cu(II) showed a high tendency to form mixed metal complexes with U(VI), while the formation of complexes is uncertain for Cd(II) and Zn(II). The ratio of the ligand to the total metal ion has been found to be 21 and metal:metal ratios of 11 and 12 have been observed.Represents part of the Ph.D. thesis submitted by Emanuel Manzurola to Ben Gurion University of the Negev.     

Determination of the equilibrium constants of association from IR-studies in the acetone-chloroform system

From IR-studies a method was developed for the determination of the equilibrium constant of association in the acetone—chloroform system. The method is based on the separation of the C=O stretching vibration band of the ketone mixed with chloroform and cyclohexane (mixed solvent method).

---

Bestimmung der Gleichgewichtskonstanten der Assoziation aus IR-spektroskopischen Messungen in Aceton-Chloroform-Mischungen

Zusammenfassung Aufgrund infrarotspektroskopischer Untersuchungen wurde eine Methode zur Bestimmung der Assoziations-Gleichgewichtkonstanten in Aceton—Chloroform Mischung entwickelt. Die Methode beruht auf einer Auftrennung der Absorptionsbande der C=O Valenzschwingung des Ketons in Mischungen mit Chloroform und Cyclohexan (sog. mixed solvent Methode).

     

SPOC模式下无机与分析化学课程教学实践

以无机与分析化学课程教学为例,探讨了SPOC混合教学模式下提高学生知识与能力的有效途径。在该课程教学中的应用和考核评价中,采用课堂教学与在线自主学习相结合的教学方式,实现了以能力培养为目标的本科教育模式的"三个转变":(1)以教为主向以学为主的转变;(2)以课堂教学为主向课内课外结合为主的转变;(3)以结果评价为主向以结果与过程评价相结合为主的转变。有效地提高了教学质量,突出地解决了目前高等院校本科教育模式面临的学生学习主动性差、参与度少的问题。     

Sum frequency generation spectroscopic studies on phase transitions of phospholipid monolayers containing poly(ethylene oxide) lipids at the air-water interface

Vibrational sum frequency generation (SFG) spectroscopy was applied to study the phase transitions of the mixed monolayers of l-alpha-distearoyl phosphatidylethanolamine (DSPE) and DSPE covalently coupled with poly(ethylene oxide) at the amino head group (DSPE-EO(45), DSPE with 45 ethylene oxide monomers) at the air-water interface. The SFG spectra were measured for the mixed monolayers with the mole fractions of DSPE-EO(45) of 0, 1.3, 4.5, 9.0, 12.5, and 16.7% at the surface pressures of 5, 15, and 35 mN/m. The monolayer compression isotherms indicated that the mixed monolayers at 5, 15, are 35 mN/m are mainly in the so-called "pancake", "mushroom", and "brush" states, respectively. The SFG spectra in the OH stretching vibration region give rise to SFG bands near 3200 and 3400 cm(-1). The mean molecular amplitude of the former band due to the OH stretching of the "icelike" water molecules associated mainly with the hydrophilic poly(ethylene oxide) (PEO) chains, exhibits appreciable decrease on compression of the mixed monolayers from 5 to 15 mN/m. The result corroborates the model for the pancake-mushroom transition, which presumes the dissolution of the PEO chains from the air-water interface to the water subphase. Further compression of the mixed monolayers to 35 mN/m causes a slight decrease of the line amplitude, which can be explained by considering a squeezing out of water molecules from the hydrophilic groups of DSPE-EO(45) in the brush state, where the PEO chains strongly interact with each other to form a tight binding state of the hydrophilic groups. The relative intensities of the SFG bands due to the CH3 asymmetric and symmetric vibrations were used to estimate the tilt angles of the terminal methyl group of DSPE, indicating that the angle increases with increasing the mole fraction of DSPE-EO(45). The angles almost saturate at the mole fraction larger than 10%, the saturation angle being nearly 90 degrees at 5 mN/m, ca. 60 degrees at 15 mN/m, and ca. 47 degrees at 35 mN/ m. Then, the introduction of the hydrophilic PEO head group causes a large tilting of the alkyl groups of DEPE in the mixed monolayers.     

Photochromism of diarylethene derivatives having cyclohexyl and cyclohexenyl groups in single-component crystals and a two-component mixed crystal

Diarylethene derivatives 1a having two cyclohexyl groups and 2a having a cyclohexyl and a cyclohexenyl group formed a mixed crystal composed of almost equal amounts of the two components, and underwent photochromism in the mixed crystal as well as in the single-component crystals.     

A small-angle neutron scattering study of sodium dodecyl sulfate-poly(propylene oxide) methacrylate mixed micelles

Mixed micelle of protonated or deuterated sodium dodecyl sulfate (SDS and SDSd25, respectively) and poly(propylene oxide) methacrylate (PPOMA) are studied by small-angle neutron scattering (SANS). In all the cases the scattering curves exhibit a peak whose position changes with the composition of the system. The main parameters which characterize mixed micelles, i.e., aggregation numbers of SDS and PPOMA, geometrical dimensions of the micelles and degree of ionisation are evaluated from the analysis of the SANS curves. The position q(max) of the correlation peak can be related to the average aggregation numbers of SDS-PPOMA and SDSd25-PPOMA mixed micelles. It is found that the aggregation number of SDS decreases upon increasing the weight ratio PPOMA/SDS (or SDSd25). The isotopic combination, which uses the "contrast effect" between the two micellar systems, has allowed us to determine the mixed micelle composition. Finally, the SANS curves were adjusted using the RMSA for the structure factor S(q) of charged spherical particles and the form factor P(q) of spherical core-shell particle. This analysis confirms the particular core-shell structure of the SDS-PPOMA mixed micelle, i.e., a SDS "core" micelle surrounded by the shell formed by PPOMA macromonomers. The structural parameters of mixed micelles obtained from the analysis of the SANS data are in good agreement with those determined previously by conductimetry and fluorescence studies.     

Self-assembly of Yttrium-containing lacunary polyoxotungstate macroanions in solution with controllable supramolecular structure size by pH or solvent content

The self-assembly and the formation of "Blackberry" type supramolecular structures for a type of Yttrium-containing polyoxometalate (K 15Na 6(H 3O) 9[(PY 2W 10O 38) 4(W 3O 14)].9H 2O, or {P 4Y 8W 43}) macroanions is characterized by using static and dynamic light scattering techniques. {P 4Y 8W 43} macroions are found to form hollow, spherical, single-layer "blackberry" structures in water and water-acetone mixed solvents. Very interestingly, the blackberry size can be accurately controlled by either changing acetone content in water-acetone mixed solvents, or by changing solution pH in aqueous solution. The blackberry size increases with decreasing pH (lower charge density) or higher acetone content in the mixed solvent (lower dielectric constant) and the blackberry size can change in responding to the change of external conditions. This indicates that the {P 4Y 8W 43} macroanions possess the properties of both "strong electrolyte type" and "weak electrolyte type" macroions, as we outlined previously. This is due to the special chemical feature of such clusters, which can be treated as Na 2HPO 4-type electrolytes in solution. The kinetics of the blackberry formation can be controlled by temperature.     

Recent advances in polyhydroxyalkanoate production by mixed aerobic cultures: from the substrate to the final product

Numerous bacteria have been found to exhibit the capacity for intracellular polyhydroxyalkanoates (PHA) accumulation. Current methods for PHA production at the industrial scale are based on their synthesis from microbial isolates in either their wild form or by recombinant strains. High production costs are associated with these methods; thus, attempts have been made to develop more cost-effective processes. Reducing the cost of the carbon substrates (e.g., through feeding renewable wastes) and increasing the efficiency of production technologies (including both fermentation and downstream extraction and recovery) are two such examples of these attempts. PHA production processes based on mixed microbial cultures are being investigated as a possible technology to decrease production costs, since no sterilization is required and bacteria can adapt quite well to the complex substrates that may be present in waste material. PHA accumulation by mixed cultures has been found under various operational conditions and configurations at both bench-scale and full-scale production. The process known as "feast and famine" or as "aerobic dynamic feeding" seems to have a high potential for PHA production by mixed cultures. Enriched cultures submitted to a transient carbon supply can synthesize PHA at levels comparable to those of pure cultures. Indeed, the intracellular PHA content can reach around 70% of the cell dry weight, suggesting that this process could be competitive with pure culture PHA production when fully developed. Basic and applied research of the PHA production process by mixed cultures has been carried out in the past decade, focusing on areas such as microbial characterization, process configuration, reactor operational strategies, process modeling and control, and polymer characterization. This paper presents a review of the PHA production process with mixed cultures, encompassing the findings reported in the literature as well as our own experimental results in relation to each of these areas.     

Characteristics of mixed bilayers of surfactants formed on alumina

The interaction between hydrocarbon and fluorocarbon surfactants on-alumina has been studied through the dispersion behavior of-alumina. When a low concentration of anionic hydrocarbon or fluorocarbon surfactant as a first additive is added to positively charged alumina, the alumina flocculates. The flocculated alumina redisperses upon addition of different surfactant from the first one by the manner that the hydrophobic parts of hydrocarbon and fluorocarbon surfactants are in contact with hydrophobic parts of the first surfactants and the hydrophilic polar groups direct out to liquid phase, resulting in the formation of mixed bilayers on the alumina. From the measurements of mean particle size, zeta potential of the alumina, and adsorbed amount of surfactants, the mixed bilayers consisting of anionic fluorocarbon-noniomc hydrocarbon surfactants and of anionic fluorocarbon-noioic hydrocarbon ones are found to be formed more preferentially than anionic hydrocarbon-anioic fluorocarbon surfactants. The property of the mixed bilayer on the alumina is also discussed using the fluorescence spectra of pyrene.     

Study of molecular interaction in the mixed film of arachidic acid and metal beta-diketonate complexes by the "surface ions" method

Molecular interaction is very important for the mechanical properties and application of Langmuir films. In general, fatty acid film is stabilized by certain "subphase ions." In this work, two metal beta-diketonate complexes (M(tmhd)n, tmhd=2,2,6,6-tetramethyl-3,5-heptanedionate) were used as "surface ions" to form stable condensed films with different ratios at the air/water interface. The pi-A isotherms of the mixed films had been measured. The smaller molecular area of the metal beta-diketonate complexes indicated that the metal beta-diketonate complexes form multilayer condensed structures at high pressure at the air/water interface. However, arachidic acid (AA) retained a monolayer structure at high pressure in the mixed system. No considerable phase separations appeared during the compression of the mixed films, which indicated that the mixed films of metal beta-diketonate complexes and AA were miscible and stable. The molecular interaction of the two components in the mixed films was investigated in detail. Mixed systems with the mixing ratio of M(tmhd)n:AA=1:2 were chosen to study the effects of the interaction on the mechanical properties of the mixed films. The molecular interaction between AA and Ce(tmhd)4 is proved to be more significant than that between AA and Sr(tmhd)2, and the pi-A isotherms of the mixed films differ a lot from that of pure AA monolayer. Due to the strong intermolecular interaction, the liquid region disappears in the Ce(tmhd)4/AA mixed films, and dynamic elasticity is improved especially at high surface pressure. On the other hand, the interaction between the AA and the Sr(tmhd)2 is much weaker and the effects of the interaction on the properties (pi-A isotherm and dynamic elasticity) of the mixed films are not so significant, especially at low surface pressure. These results are in accordant with that of the UV spectra analyses.