Electron transfer at self-assembled monolayers measured by scanning electrochemical microscopy

New approaches have been developed for measuring the rates of electron transfer (ET) across self-assembled molecular monolayers by scanning electrochemical microscopy (SECM). The developed models can be used to independently measure the rates of ET mediated by monolayer-attached redox moieties and direct ET through the film as well as the rate of a bimolecular ET reaction between the attached and dissolved redox species. By using a high concentration of redox mediator in solution, very fast heterogeneous (10(8) s(-1)) and bimolecular (10(11) mol(-1) cm(3) s(-1)) ET rate constants can be measured. The ET rate constants measured for ferrocene/alkanethiol on gold were in agreement with previously published data. The rates of bimolecular heterogeneous electron transfer between the monolayer-bound ferrocene and water-soluble redox species were measured. SECM was also used to measure the rate of ET through nonelectroactive alkanethiol molecules between substrate gold electrodes and a redox probe (Ru(NH(3))(6)(3+)) freely diffusing in the solution, yielding a tunneling decay constant, beta, of 1.0 per methylene group.     

Heterogeneous electron transfer at Au/SAM junctions in a room-temperature ionic liquid under pressure

Proven electrochemical approaches were applied to study heterogeneous electron transfer (ET) between selected redox couples and gold electrodes modified with alkanethiol self-assembled monolayers (SAMs), using the room-temperature ionic liquid (RTIL) [bmim][NTf2] as reaction medium; ferrocene as freely diffusing redox probe in the RTIL was tested for ET through both thin (butanethiol) and thick (dodecanethiol) assemblages at pressures up to 150 MPa; well behaved kinetic patterns and reproducibility of data were demonstrated for ET within the unique Au/SAM/RTIL arrays.     

Effects of monolayer structures on long-range electron transfer in helical peptide monolayer

Self-assembled monolayers of alpha-helical peptides were prepared on gold, and the effects of the monolayer structures (kind of constituent amino acid, molecular orientation, and molecular packing) on long-range electron transfer through the helical peptides were studied. The helical peptides were 16mer peptides having a thiophenyl linker at the N-terminal for immobilization on gold and a redox active ferrocene moiety at the C-terminal as an electron-transfer probe. The peptides were immobilized on gold by a gold-sulfur linkage and the electron transfer from the ferrocene moiety to gold was studied by electrochemical methods. When two types of the peptides, one with the repeating unit of Leu-Aib (Aib represents 2-aminoisobutyric acid) and the other with that of Ala-Aib, were compared, the electron transfer was found one order slower in the Leu-Aib peptide monolayer than that in the Ala-Aib peptide monolayer. The self-assembled monolayers of the Ala-Aib peptide with mixing of three different lengths of the peptides, 8mer, 12mer, and 16mer without a ferrocene moiety, were also prepared. The monolayer regularity in terms of molecular orientation and packing was higher roughly in the order of the monolayers mixed with 16mer > 12mer > no additive > 8mer, but the electron transfer became faster in the opposite order. The logarithms of the standard rate constants showed a nearly linear relationship with the direct distances between the ferrocene moiety and gold (beta = 0.32 A (-1)). Some data deviated from this linear relationship, but the deviations could be explained from the difference in the molecular packing, which was evaluated from the monolayer capacitance. It is thus concluded that an electron is transferred along a few molecules along the surface normal so that the vertical orientation or the increase of the interchain backbone separation slows down the electron transfer. Further, it is demonstrated that a tightly packed monolayer, where vibrational mode is restricted, suppresses the electron transfer. Three models are proposed to account for the observed molecular dynamics effects on the basis of either electron-transfer mechanism of electron tunneling or sequential hopping.     

Nanoparticle-mediated electron transfer across ultrathin self-assembled films

The electrochemical behavior of arrays of Au nanoparticles assembled on Au electrodes modified by 11-mercaptoundecanoic acid (MUA) and poly-L-lysine (PLYS) was investigated as a function of the particle number density. The self-assembled MUA and PLYS layers formed compact ultrathin films with a low density of defects as examined by scanning tunneling microscopy. The electrostatic adsorption of Au particles of 19 +/- 3 nm on the PLYS layer resulted in randomly distributed arrays in which the particle number density is controlled by the adsorption time. In the absence of the nanoparticles, the dynamics of electron transfer involving the hexacynoferrate redox couple is strongly hindered by the self-assembled film. This effect is primarily associated with a decrease in the electron tunneling probability as the redox couple cannot permeate through the MUA monolayer at the electrode surface. Adsorption of the Au nanoparticles dramatically affects the electron-transfer dynamics even at low particle number density. Cyclic voltammetry and impedance spectroscopy were interpreted in terms of classical models developed for partially blocked surfaces. The analysis shows that the electron transfer across a single particle exhibits the same phenomenological rate constant of electron transfer as for a clean Au surface. The apparent unhindered electron exchange between the nanoparticles and the electrode surface is discussed in terms of established models for electron tunneling across metal-insulator-metal junctions.     

Electron transfer between ferrocene-modified Au/octadecanethiol/lipid BLM electrode and redox couples in solution

Bilayers incorporated with ferrocene consisting of self-assembled octadecanethiol and lipid monolayer on gold substrates were fabricated. Its electrochemical behaviors in solutions containing different redox couples were investigated by cyclic voltammetry and ac impedance. The transmembrane electron transfer reaction across octadecanethiol self-assembled film and an adsorbed phospholipid layer mediated by ferrocene have been observed in the solution of Fe(CN)6(3-/4-). The formal potential difference between mediator in bilayer lipid membrane (BLM) and redox couple in solution has a great impact on the transmembrane electron transfer behavior. The ferrocene-modified BLM electrodes might be useful for constructing a bilayer-based electrochemical current rectifying device.     

A generic platform for the addressable functionalisation of electrode surfaces through self-induced "electroclick"

A novel and general strategy for the immobilisation of functional objects onto electrodes is described. The concept is based on the addition of two pendant ethynyl groups onto a bis(pyridyl)amine derivative, which acts as a molecular platform. This platform is pre-functionalised with an N(3)-tagged object of interest by Huisgen cycloaddition to one of the ethynyl groups in biphasic conditions. Hence, when complexed by Cu(II) , this molecular-object holder can be immobilised, by a "self-induced electroclick", through the second ethynyl group onto N(3)-alkanethiol self-assembled monolayers on a gold electrode. Two different functional groups, a redox innocent ((CH(2))(3)-Ph) and an electrochemical probe (ferrocene), were immobilised by following this strategy. The in situ electrochemical grafting showed, for both systems, that the kinetics of immobilisation is fast. The voltammetric characterisation of the surface-tagged functionalised copper complexes indicated that a good surface coverage was achieved and that a moderately fast electron-transfer reaction occurs. Remarkably, in the case of the redox-active ferrocenyl-immobilised system, the electrochemical response highlighted the involvement of the copper ion of the platform in the kinetics of the electron transfer to the ferrocene moiety. This platform is a promising candidate for applications in surface addressing in areas as diverse as biology and materials.     

A comparison between interfacial electron-transfer rate constants at metallic and graphite electrodes

The Fermi golden rule formalism has been used to derive the rate constant for interfacial electron transfer from a semimetallic electrode, such as highly ordered pyrolytic graphite (HOPG), to a redox couple in solution. A simple expression is presented that semiquantitatively relates the electron-transfer rate constant at a semimetallic electrode to that at a metallic electrode. The approach allows for the estimation of the value of the rate constant for interfacial charge transfer to nonadsorbing outer-sphere redox species at semimetallic electrodes. Rate constants for interfacial electron transfer for a variety of one-electron redox couples at semimetallic electrodes have been calculated relative to the rate constant of the ferrocenium/ferrocene redox couple at a gold electrode. Good agreement is found, in general, between the calculated and observed rate constants.     

Relaxation of the electrical double layer after an electron transfer approached by Brownian dynamics simulation

In this paper, the dynamical properties of the electrochemical double layer following an electron transfer are investigated by using Brownian dynamics simulations. This work is motivated by recent developments in ultrafast cyclic voltammetry which allow nanosecond time scales to be reached. A simple model of an electrochemical cell is developed by considering a 1:1 supporting electrolyte between two parallel walls carrying opposite surface charges, representing the electrodes; the solution also contains two neutral solutes representing the electroactive species. Equilibrium Brownian dynamics simulations of this system are performed. To mimic electron transfer processes at the electrode, the charge of the electroactive species are suddenly changed, and the subsequent relaxation of the surrounding ionic atmosphere are followed, using nonequilibrium Brownian dynamics. The electrostatic potential created in the center of the electroactive species by other ions is found to have an exponential decay which allows the evaluation of a characteristic relaxation time. The influence of the surface charge and of the electrolyte concentration on this time is discussed, for several conditions that mirror the ones of classical electrochemical experiments. The computed relaxation time of the double layer in aqueous solutions is found in the range 0.1 to 0.4 ns for electrolyte concentrations between 0.1 and 1 mol L(-1) and surface charges between 0.032 and 0.128 C m(-2).     

Rate of interfacial electron transfer through the 1,2,3-triazole linkage

The rate of electron transfer is measured to two ferrocene and one iron tetraphenylporphyrin redox species coupled through terminal acetylenes to azide-terminated thiol monolayers by the Cu(I)-catalyzed azide-alkyne cycloaddition (a Sharpless "click" reaction) to form the 1,2,3-triazole linkage. The high yield, chemoselectivity, convenience, and broad applicability of this triazole formation reaction make such a modular assembly strategy very attractive. Electron-transfer rate constants from greater than 60,000 to 1 s(-1) are obtained by varying the length and conjugation of the electron-transfer bridge and by varying the surrounding diluent thiols in the monolayer. Triazole and the triazole carbonyl linkages provide similar electronic coupling for electron transfer as esters. The ability to vary the rate of electron transfer to many different redox species over many orders of magnitude by using modular coupling chemistry provides a convenient way to study and control the delivery of electrons to multielectron redox catalysts and similar interfacial systems that require controlled delivery of electrons.     

Electrochemical gating of single osmium molecules tethered to Au surfaces

The electrochemical study of electron transport between Au electrodes and the redox molecule Os[(bpy)₂(PyCH₂ NH₂CO-]ClO₄ tethered to molecular linkers of different length (1.3 to 2.9 nm) to Au surfaces has shown an exponential decay of the rate constant k _ET ⁰ with a slope β = 0.53 consistent with through bond tunneling to the redox center. Electrochemical gating of single osmium molecules in an asymmetric tunneling nano-gap between a Au(111) substrate electrode modified with the redox molecules and a Pt-Ir tip of a scanning tunneling microscope was achieved by independent control of the reference electrode potential in the electrolyte, E _ref ? E _s, and the tip-substrate bias potential, E _bias. Enhanced tunneling current at the osmium complex redox potential was observed as compared to the off resonance set point tunneling current with a linear dependence of the overpotential at maximum current vs. the E _bias. This corresponds to a sequential two-step electron transfer with partial vibration relaxation from the substrate Au(111) to the redox molecule in the nano-gap and from this redox state to the Pt-Ir tip according to the model of Kuznetsov and Ulstrup (J Phys Chem A 104: 11531, 2000). Comparison of short and long linkers of the osmium complex has shown the same two-step ET (electron transfer) behavior due to the long time scale in the complete reduction-oxidation cycle in the electrochemical tunneling spectroscopy (EC-STS) experiment as compared to the time constants for electron transfer for all linker distances, k _ET ⁰.     

Effects of dipole moment, linkers, and chromophores at side chains on long-range electron transfer through helical peptides

Octadecapeptides carrying a ferrocene moiety at the molecular terminal were self-assembled on gold, and long-range electron transfer from the ferrocene moiety to gold was investigated by electrochemical methods. Effects on electron transfer of dipole moment of helical peptides, linkers connecting the peptide to gold, and chromophores introduced into the side chains were discussed. Cyclic voltammetry of the monolayers in an aqueous solution revealed that long-range electron transfer over 40 A occurred along the peptide molecule. Chronoamperometry showed that the long-range electron transfer should be ascribed to a hopping mechanism with use of amide groups as hopping sites. Electron transfer through the long peptide was not significantly accelerated by the dipole moment. However, the linker remarkably affected electron transfer depending on whether it was a methylene chain or a phenylene group, suggesting that local electron transfer between gold and the peptides should be the slowest step to determine the overall rate. Pyrenyl groups introduced into the side chains in the middle of the peptide molecule did not noticeably change electron transfer, probably because pyrenyl groups were too distant to allow direct electron transfer between them. Electrostatic potential profiles across the peptide monolayers were also calculated to explain reasonably the several interesting features in the present peptide systems.     

Heterogeneous electron-transfer kinetics for ruthenium and ferrocene redox moieties through alkanethiol monolayers on gold

The standard heterogeneous electron-transfer rate constants between substrate gold electrodes and either ferrocene or pentaaminepyridine ruthenium redox couples attached to the electrode surface by various lengths of an alkanethiol bridge as a constituent of a mixed self-assembled monolayer were measured as a function of temperature. The ferrocene was either directly attached to the alkanethiol bridge or attached through an ester (CO(2)) linkage. For long bridge lengths (containing more than 11 methylene groups) the rate constants were measured using either chronoamperometry or cyclic voltammetry; for the shorter bridges, the indirect laser induced temperature jump technique was employed to measure the rate constants. Analysis of the distance (bridge length) dependence of the preexponential factors obtained from an Arrhenius analysis of the rate constant versus temperature data demonstrates a clear limiting behavior at a surprisingly small value of this preexponential factor (much lower than would be expected on the basis of aqueous solvent dynamics). This limit is independent of both the identity of the redox couple and the nature of the linkage of the couple to the bridge, and it is definitely different (smaller) from the limit derived from an equivalent analysis of the rate constant (versus temperature) data for the interfacial electron-transfer reaction through oligophenylenevinylene bridges between gold electrodes and ferrocene. There are a number of possible explanations for this behavior including, for example, the possible effects of bridge conformational flexibility upon the electron-transfer kinetics. Nevertheless, conventional ideas regarding electronic coupling through alkane bridges and solvent dynamics are insufficient to explain the results reported here.     

The direct electron transfer of myoglobin based on the electron tunneling in proteins

The electron tunneling of the protein-polypeptide interactions was observed in the study of direct electron transfer of the myoglobin (Mb) on the electrode surface. The Mb was selected as a redox active protein and gelatine was selected to couple with Mb to form an electron tunneling. The electrochemical results indicated the presence of the electron tunneling and the direct electron transfer. The circular dichroism spectra suggested that the beta-sheet chain of gelatine could interact with alpha-helical chain to form an electron tunneling to promote the protein direct electrochemistry. The SDS-PAGE results proved that the electron tunneling between Mb and gelatine was noncovalent hydrogen bonds. The immobilized Mb showed a couple of quasi-reversible redox peaks with a formal potential of -0.37V (vs SCE) in 0.1 M pH 7.0 PBS. The modified electrodes displayed a rapid amperometric response to the reduction of oxygen, H2O2, and nitrite.     

Electron tunneling pathways and role of adenine in repair of cyclobutane pyrimidine dimer by DNA photolyase

Electron tunneling pathways in enzymes are critical to their catalytic efficiency. Through electron tunneling, photolyase, a photoenzyme, splits UV-induced cyclobutane pyrimidine dimer into two normal bases. Here, we report our systematic characterization and analyses of photoinitiated three electron transfer processes and cyclobutane ring splitting by following the entire dynamical evolution during enzymatic repair with femtosecond resolution. We observed the complete dynamics of the reactants, all intermediates and final products, and determined their reaction time scales. Using (deoxy)uracil and thymine as dimer substrates, we unambiguously determined the electron tunneling pathways for the forward electron transfer to initiate repair and for the final electron return to restore the active cofactor and complete the catalytic photocycle. Significantly, we found that the adenine moiety of the unusual bent flavin cofactor is essential to mediating all electron-transfer dynamics through a superexchange mechanism, leading to a delicate balance of time scales. The cyclobutane ring splitting takes tens of picoseconds, while electron-transfer dynamics all occur on a longer time scale. The active-site structural integrity, unique electron tunneling pathways, and the critical role of adenine ensure the synergy of these elementary steps in this complex photorepair machinery to achieve maximum repair efficiency which is close to unity. Finally, we used the Marcus electron-transfer theory to evaluate all three electron-transfer processes and thus obtained their reaction driving forces (free energies), reorganization energies, and electronic coupling constants, concluding that the forward and futile back-electron transfer is in the normal region and that the final electron return of the catalytic cycle is in the inverted region.     

Kramers problem for nonequilibrium current-induced chemical reactions

We discuss the use of tunneling electron current to control and catalyze chemical reactions. Assuming the separation of time scales for electronic and nuclear dynamics we employ Langevin equation for a reaction coordinate. The Langevin equation contains nonconservative current-induced forces and gives nonequilibrium, effective potential energy surface for current-carrying molecular systems. The current-induced forces are computed via Keldysh nonequilibrium Green's functions. Once a nonequilibrium, current-depended potential energy surface is defined, the chemical reaction is modeled as an escape of a Brownian particle from the potential well. We demonstrate that the barrier between the reactant and the product states can be controlled by the bias voltage. When the molecule is asymmetrically coupled to the electrodes, the reaction can be catalyzed or stopped depending on the polarity of the tunneling current.     

Electrochemical oxidation-reduction paths for pyrimidine, cytosine, purine and adenine Correlation and application

In order to evaluate the striking discrepancy between the experimental ease of polarographic reduction of adenine and cytosine, and that predicted by molecular orbital calculation, the electrochemical oxidation-reduction behaviour of pyrimidine, cytosine, purine, adenine and related compounds was investigated at both mercury and graphite electrodes. Information was obtained on the specific adsorption of reactant and product species on the electrode, the reversibility of the energy-controlling electron-transfer step, and accompanying chemical reactions. Triangular sweep voltammetry, a.c. and d.c. polarography, and electrocapillary data, in particular, were utilized. The first three techniques were critically examined for their potential analytical utility. The results were compared with previously obtained electrochemical data and the sequence of electron-transfer and various non-electron transfer steps was more firmly established. It became clear that in order validly to correlate quantum mechanically calculated data for the energy required to add or remove an electron to or from the outermost electron level of each molecule (in the gas phase), with electrochemical redox potentials (in solution), the effects of adsorption, electron-transfer reversibility and solvation energy must be considered.     

Electrolyte gating in redox-active tunneling junctions--an electrochemical STM approach

We report on the construction of an asymmetric tunneling junction between a Au STM tip and a Au(111)-(1 x 1) substrate electrode modified with the redox-active molecule N-hexyl-N'-(6-thiohexyl)-4,4'-bipyridinium bromide (HS6V6) in an electrochemical environment. The experiments focused on the reversible one-electron transfer reaction between the viologen dication V(2+) and the radical cation V(+*). Employing the concept of "electrolyte gating" we demonstrate transistor- and diodelike behavior based on in situ scanning tunneling spectroscopy at constant or variable bias voltages. We derived criteria and verified that the experimental data could be represented quantitatively by a model assuming a two-step electron transfer with partial vibrational relaxation. The analysis illustrates that the magnitude of the tunneling enhancement depends on the initial redox state of HS6V6 (V(2+) or V(+*)). Characteristic parameters, such as reorganization energy, potential drop, and overpotential across the tunneling gap were estimated and discussed. We present a clear discrimination between the redox-mediated enhanced and the off-resonance tunneling currents I(enh) respective I(T) and distinguish between electron transfer in symmetric and asymmetric Au | redox-molecule | Au configurations.     

Electrochemical reversibility of vinylferrocene monolayers covalently attached on H-terminated p-Si(100)

A reversible electrochemical behavior is demonstrated on a specially prepared redox-functionalized H-Si(100) surface, obtained via an extra-mild grafting procedure from vinylferrocene. The results of a detailed XPS and electrochemical characterization of the resulting hybrid are reported and discussed to propose it as a reference system for high-quality electroactive monolayers on Si. The investigated ferrocene derivative bears a functional group suitable for a mild route to covalent anchoring on Si, which is based on a photoinduced reaction with visible light under an inert atmosphere. Electrochemical reversibility is shown by sharp symmetric voltammograms on freshly prepared p-Si electrodes. Anodic oxide growth is responsible for the progressive degradation of the electrochemical response. Still, fast electron transfer to the surface redox species is maintained during several thousands cycles.     

Probing ground-state single-electron self-exchange across a molecule-metal interface

We have probed single-molecule redox reaction dynamics of hemin (chloride) adsorbed on Ag nanoparticle surfaces by single-molecule surface-enhanced Raman spectroscopy (SMSERS) combined with spectroelectrochemistry. Redox reaction at the molecule/Ag interface is identified and probed by the prominent fluctuations of the Raman frequency of a specific vibrational mode, ν(4), which is a typical marker of the redox state of the iron center in a hemin molecule. On the basis of the autocorrelation and cross-correlation analysis of the single-molecule Raman spectral trajectories and the control measurements of single-molecule spectroelectochemistry and electrochemical STM, we suggest that the single-molecule redox reaction dynamics at the hemin-Ag interface is primarily driven by thermal fluctuations. The spontaneous fluctuation dynamics of the single-molecule redox reaction is measured under no external electric potential across the molecule-metal interfaces, which provides a novel and unique approach to characterize the interfacial electron transfer at the molecule-metal interfaces. Our demonstrated approaches are powerful for obtaining molecular coupling and dynamics involved in interfacial electron transfer processes. The new information obtained is critical for a further understanding, design, and manipulation of the charge transfer processes at the molecule-metal interface or metal-molecule-metal junctions, which are fundamental elements in single-molecule electronics, catalysis, and solar energy conversion.