一种新型的光固化活性稀释剂——乙烯基醚

介绍了一种新型的光固化活性稀释剂－－乙烯基醚的种类，合成，反应机理及在光固化中的应用。     

自由基-阳离子混杂光固化环氧/丙烯酸酯协同效应的研究

采用可见光引发自由基-阳离子混杂光固化体系,固化环氧/丙烯酸酯制备的复合树脂,重点研究了自由基光引发剂樟脑醌和阳离子光引发剂二苯基碘鎓六氟磷酸盐质量比对固化时间、固化深度、线尺寸变化率及树脂性能的影响。结果表明:在可见光的照射下,当樟脑醌在混合引发剂中的质量分数为0.75时,固化时间为6s,光固化深度为7.86mm,线尺寸变化率为0.2%,固化复合树脂的综合性能优良;很好地证明了自由基-阳离子混杂光固化体系结合了自由基聚合和阳离子聚合的优点,表现出较好的协同效应。     

混杂光固化体系的原理及应用

混杂光固化或双重固化是指在同一体系中采用两种或两种以上不同类型的聚合反应来使体系固化的方法,它是原位改性高分子的一种新方法.混杂光固化体系包括自由基-阳离子混杂光固化体系、自由基-缩聚混杂体系和自由基-自由基混杂体系等.本文综述了混杂光固化体系的原理及其应用.     

活性稀释剂苄基缩水甘油醚丙烯酸酯的合成及性能表征

本文以苄基缩水甘油醚和丙烯酸为原料合成活性稀释剂苄基缩水甘油醚丙烯酸酯(BGEA),研究了反应温度、催化剂和阻聚剂用量对反应的影响.结果表明最佳的反应条件为:反应温度110℃左右,催化剂N,N’-二甲基苄胺质量分数为0.9%,阻聚剂对甲氧基苯酚质量分数为0.2%.后将BGEA作为稀释剂加入到双酚A型环氧丙烯酸树脂中配制成光固化涂料,利用TG、AFM等表征手段对光固化膜的热性能、表面形貌及物理机械性能进行研究.     

新型三官能团脂环族环氧化合物的合成、表征及其阳离子引发光固化活性研究

以双环戊二烯等为原料合成一种新型三官能团液体脂环族环氧树脂. 通过红外光谱、 核磁共振氢谱及质谱等对其中间体及环氧树脂的结构进行了表征. 所得脂环族环氧树脂采用阳离子引发 剂二甲苯基碘鎓六氟磷酸盐引发进行紫外光固化, 对其光固化活性进行了研究, 同时讨论了氧化剂过氧化苯甲酰对该光固化体系的增感作用. 研究结果表明, 新合成的脂环族环氧树脂采用二甲苯基碘鎓六氟磷酸盐引发可以进行光固化, 过氧化苯甲酰明显地加快了其光固化速度, 固化膜具有较好的热稳定性.     

控制/活性阳离子聚合的研究进展

从链引发、链增长两个方面对控制,活性阳离子聚合及其最新研究进展进行了综述.介绍了茂金属类、水溶性Lewis类和烷基铝等几类新型的引发体系,以及亲核试剂、沉淀平衡和"阳离子池"在控制链增长方面的应用.     

紫外光固化水性油墨及墨膜耐磨性能

传统紫外光固化(UV)油墨具有粘度低、固化速度快、应用范围广等优点。 但存在使用少量有机溶剂、交联程度低等缺陷。 本文通过自由基聚合制备的苯乙烯丙烯酸共聚物与甲基丙烯酸羟乙酯(HEMA)反应制备水性预聚物。 通过甲基丙烯酸缩水甘油酯(GMA)和乙二胺反应制备了含有四丙烯酸官能团的活性稀释剂。 最后,通过水性预聚物、活性稀释剂、光引发剂以及少量溶剂制备了UV光固化水性油墨。 探讨了光引发剂的种类和质量分数、预聚物的相对分子质量和质量分数、活性稀释剂的结构和质量分数对UV油墨的光固化速度以及耐磨度的影响。 当预聚物的数均相对分子质量为1.98×10⁵且质量分数为30%、光引发剂质量分数为4%、活性稀释剂的官能团数目为4且质量分数为40%的UV水性油墨的光固化速率为1 s,经50次磨损质量损失为9%。 该方法所制得的UV水性油墨可用于柔版印刷、凹印、数字印刷等。     

活性阳离子聚合法合成嵌段共聚物的研究进展

在８０年代,阳离子聚合研究的一个最重要突破可能就是活性阳离子聚合。目前为止,有关活性阳离子聚合的新引发体系,新单体及合成应用等方面已取得巨大进展,本综述主要介绍利用活性阳离子聚合合成二、三元嵌段和多元嵌段共聚物的研究成果。     

异丁烯的活性阳离子聚合反应

作者采用２ ,４ ,４ 三甲基 ２ 氯戊烷（ Ｔ Ｍ Ｐ Ｃｌ）／ Ｔｉ Ｃｌ４ 引发剂体系,在电子给体存在下,对异丁烯（ Ｉ Ｂ） 的活性阳离子聚合进行了研究．在 Ｔ Ｍ Ｐ Ｃｌ／ Ｔｉ Ｃｌ４／ Ｉ Ｂ 二氯甲烷／ 己烷（４０／６０ Ｖ／ Ｖ）／ － ８０ ℃聚合系统中,以 Ｎ, Ｎ 二甲基苯胺、吡啶及三乙胺为电子给体,对聚合反应速率及产物分子量分布的影响进行了研究．发现当 Ｎ, Ｎ 二甲基苯胺或三乙胺的浓度稍高于质子性杂质的浓度时,即能实现异丁烯的活性聚合,得到分子量分布较窄的聚合物．电子给体的主要作用是质子捕捉剂,抑制痕量水的引发,而且对阳离子具有稳定作用     

4-乙烯基-1-环己烯二环氧化物阳离子单体光聚合性能研究

本文用实时红外光谱研究了4-乙烯基-1-环己烯二环氧化物(TTA22)单体的光聚合性能。分别考察了光引发剂浓度、光源、光强及增感剂浓度对其光聚合性能的影响。选用3,4-环氧环己基甲酸-3′,4′-环氧环己基甲酯(TTA21)作为参照,比较了不同单体的光固化性能。结果表明,随着引发剂浓度以及光强的增加,环氧基转化率及转化速率随之增加。LED光源下单体的转化率和转化速率低于UV汞灯。对TTA22和TTA21光固化后材料的热稳定性进行分析,结果显示TTA21的热稳定性优于TTA22的。     

Effect of Temperature on the Cationic Photopolymerization of Epoxides

The effects of temperature on the photoinitiated cationic ring‐opening polymerizations of a number of different epoxide monomers were studied with the aid of a modified optical pyrometer instrument. Depending on the structures of the epoxide monomer, various behaviors were observed. The results were interpreted as due to steric and electronic features inherent in the structures of the monomers that affect the stabilization of the secondary oxonium ions, which are formed as intermediates in these polymerizations. At one extreme, cycloaliphatic epoxides such as cyclohexene oxide give highly reactive oxonium intermediates that exhibit high rates of polymerization even at subambient temperatures. At the other extreme, alkyl glycidyl ethers produce oxonium ion intermediates, which are so stable that they do not spontaneously react to form polymer at room temperature. By manipulation of the structure of the epoxide monomer, novel monomers with tailored reactivities can be prepared.     

Antistatic Epoxy Coatings With Carbon Nanotubes Obtained by Cationic Photopolymerization

Antistatic epoxy coatings are obtained, for the first time, by cationic UV curing of an epoxy resin in the presence of a very low content of carbon nanotubes (CNTs). It is shown that the addition of only 0.025 wt.‐% of CNTs into the resin is sufficient to obtain a composite suitable for applications that require electrostatic discharge. An extended percolative structure that forms a conductive CNT network is clearly evidenced within the polymeric matrix, notwithstanding the very small CNT content. The use of such UV‐cured epoxy material systems for antistatic coatings is quite realistic and promising.

     

基于UV-LED茂铁盐体系对脂环族环氧单体的阳离子光聚合动力学研究

本文利用实时傅里叶变换红外光谱(real-time FTIR)研究了脂环族环氧单体(CE)在405 nm UV-LED光源下的光聚合动力学。以η6-异丙苯茂铁六氟磷酸盐(I-261)作为阳离子光引发剂,2-异丙基硫杂蒽酮(ITX)、姜黄素(CC)和1-[4-(苯基偶氮)苯基偶氮]-2-萘酚(SudanⅢ)作为光敏剂,探究该茂铁盐体系对CE单体环氧基团转化率及聚合速率的影响。结果表明,尽管所有光敏剂都能有效地引发光聚合,但是ITX和CC体系在405 nm光源的辐照下表现出更高的聚合效率。在8.0%(质量分数)I-261和0.5%ITX条件下,CE的单体转化率从74.4%提高至89%以上,最大聚合速率提高了1.9倍。在8.0%(质量分数)I-261和1.0%CC条件下,CE的单体转化率从74.4%提高至88%以上,最大聚合速率提高了1.7倍。     

Novel Tetraspiroorthocarbonates as Successful Anti-shrinking Agents for the Photopolymerization of Epoxy Monomers

A pair of novel tetrafunctional spiroorthocarbonates (TETRASOC) was prepared in three stages. First, glycerol was reacted with tetraethyl orthocarbonate to form a pair of isomeric hemi spiroorthocarbonates (HEMI SOC-OLs) by monocyclization of glycerol. Formation of these two isomers depends on terminal or adjacent hydroxyl groups of glycerol reacting with the tetraethylorthocarbonate to form five and six-membered ring HEMI SOC-OLs. Second, the HEMI SOC-OLs were made to undergo another cyclization reaction by reacting with 1,3-propanediol, to form a pair of spiroorthocarbonates with one hydroxyl group (SOC-OL). In the third stage, the SOC-OL was used as nucleophylic reactant to displace the bromine atom of pentaerythritol bromide to form the final product TETRASOC. A volume change study was carried out to determine the efficiency of TETRASOC as an anti-shrinking additive finding that even at a low concentration of 7 mol%, it caused a 2.18% expansion of the polymeric volume of a bis epoxycyclohexane monomer (3,4-EP). Dynamic Mechanical Analysis (DMA) determined that the flexibilization induced by the TETRASOC in the polyether derived from 3,4-EP did not adversely impact the mechanical properties of the polymer.     

Low volatile monofunctional reactive diluents for radiation curable formulations

In the last decades the importance of UV curable formulations has increased continuously. Their fast curing speed, solvent-free polymerization conditions, and the formation of hard and highly crosslinked photopolymer networks represent major benefits. Commercial UV resins generally consist of multi-functional vinyl oligomers, photoinitiators, additives, and reactive diluents. Mono- and multi-functional reactive diluents serve as thinners to lower the overall resin viscosity and to improve processability. However, many monofunctional reactive diluents like isobornyl (meth)acrylate or benzyl (meth)acrylate exhibit high volatility, often already at room temperature. This causes adverse effects such as unpleasant odor, potential health risks, and changing resin composition during processing. A new group of monomers that show high potential for replacing traditional highly volatile reactive diluents are salicylate (meth)acrylates. In this work, salicylate-based thinners are synthesized, polymerized, and characterized with respect to their viscosity, volatility, thermal stability, photoreactivity, and thermomechanical properties of their homopolymers. Additionally, a first example of their diluting effect in a highly viscous difunctional polyester urethane methacrylate is demonstrated with 30 wt% of a cycloaliphatically and an aromatically substituted salicylate methacrylate. The polymers of the diluted resin exhibit similarly high glass transition temperatures of 110 and 126 °C, which are in the range of the polymers of the undiluted resin.     

紫外光固化涂料及其发展状况

紫外光固化涂料具有高效率、低消耗的特点,是一种新型环保节能型涂料。文章综述了紫外光固化涂料的特点、固化原理、主要组成包括齐聚物、活性稀释剂、光引发剂和助剂以及紫外光固化涂料的发展前景。     

Preparation of Thermo-Sensitive Magnetic Cationic Hydrogel for the Adsorption of Reactive Red Dye

In this study, thermo-sensitive magnetic cationic hydrogel (TSMCH) based on (3-acrylamidopropyl) trimethyl ammonium chloride (APTMACl) and N-isopropylacrylamide (NIPAm) was synthesized by free radical copolymerization. The TSMCH was characterized with Fourier transform infrared spectroscopy, thermal gravimetric analysis, x-ray diffraction, scanning electron microscope with energy dispersive x-ray, vibrating sample magnetometer, and zeta potential, and employed as adsorbent for adsorbing reactive red (RR) dye. Effects of molar ratios of APTMACl to NIPAm on the adsorption capacity of TSMCH were studied, and the results showed that a maximum adsorption capacity (1428.57 mg RR g^?1 TSMCH) had been achieved when the molar ratio of APTMACl to NIPAm was 1:1. The adsorption isotherm of RR was well fitted by the Langmuir isotherm equation. TSMCH had good selectivity for adsorbing RR. Solution pH hardly affected the adsorption of RR on the TSMCH. The adsorption amount of RR increased with the increase of temperature. The adsorption–desorption of TSMCH was evaluated in three circles and a high regeneration rate was demonstrated.     

铁-芳烃络合物引发氧化环己烯阳离子光聚合反应动力学研究

以环戊二烯异丙苯铁六氟磷酸盐为引发剂,用示差扫描量热法研究了氧化环己烯(CHO)阳离子聚合反应动力学.实验结果表明,温度对CHO聚合反应影响很大.CHO在一系列温度下等温聚合时,放热量和转化率均在40℃左右最高,而聚合反应速率则随着温度的升高而降低.CHO聚合反应属一级反应,活化能为-9.87kJ/mol,并对聚合反应历程进行了理论推导,其结果与实验结果相符合.     

Photoactivated Cationic Frontal Polymerization

Photoactivated cationic ring-opening polymerizations of certain oxirane and oxetane monomers take place in a frontal manner. The study of the frontal behavior of those monomers was conducted using a new analytical technique involving optical pyrometry that provides insight into the mechanism of these polymerizations.