Structural and DC conduction studies on vacuum evaporated BaTiO3 thin films prepared from BaTiO3 nano particles synthesised by wet chemical method

BaTiO₃ nanoparticles prepared by wet chemical method were thermally grown onto well cleaned glass substrates under the vacuum of 2 × 10⁻⁵ Torr, using 12A4 Hind Hivac coating unit. An Al–BaTiO₃–Al sandwich structure has been used for electrical conduction properties in the temperature range 303–423 K. The composition of nanoparticles and thin films were identified by EDS spectrum. The structural studies have been performed by the X-ray diffraction (XRD) technique. The X-ray analysis showed that the nano particle has a tetragonal structure and deposited films at a lower thickness amorphous in nature, whereas the crystallinity increases with increase of thickness. In the DC conduction studies, the current–voltage characteristics of the films showed ohmic conduction in the low voltage region. In the higher voltage region, a space charge limited conduction (SCLC) takes place due to the presence of the trapping level. The activation energy was estimated and the values found to decrease with increasing applied voltage. The zero field value of the activation energy is found to be 0.31 eV. The free carrier mobility, carrier density and trap density values were calculated and reported in this paper.     

Optical properties of carbon nanotubes and BaTiO3 composite thin films

Multiwalled carbon nanotubes and BaTiO₃ composite films have been prepared by pulsed-laser deposition technique at room temperature and high temperature of 600℃, separately. The structures of the composite films are investigated by using scanning electron microscopy and x-ray diffraction. The optical behaviours of the samples produced at different temperatures are compared with Raman spectroscopy, and UV-visible absorption. And the observation by Z-scan technique reveals that the composite films have a larger optical nonlinearity, and the samples prepared at high temperatures have better transmittance and opposite sign imaginary part of optical third-order nonlinearity.     

Optical characterization and microstructure of BaTiO3 thin films obtained by RF-magnetron sputtering

BaTiO₃ thin films were deposited on Pt/Ti/SiO₂/Si by rf planar-magnetron sputtering. The films thickness increases with the decrease of both deposition pressure and sample-discharge centre distance. The films annealed at 900 °C, for 8 h, present direct band gap energy ranged between 3.57 and 3.59 eV. The dependence of the structure and microstructure (texture, degree of crystallinity), as well as of the optical characteristics on the deposition parameters, was analysed. Using spectroscopic ellipsometry (SE) measurements coupled with the Bruggeman Effective Medium Approximation (B-EMA), the layer structure and the surface roughness, were determined. The root mean square roughness values of the surface layer, estimated by atomic force microscopy (AFM) analyses, are ranged between 10 and 20 nm and were in good agreement with SE data.The obtained films have tetragonal unit cell and show densely packed, non-columnar morphology and hexagon-like crystallite shape.     

四方相BaTiO3缺陷性质的第一性原理计算

采用基于密度泛函理论的第一性原理方法,研究了BaTiO₃在四方相下的各种缺陷性质.计算结果表明,在富氧环境下,钛的中性氧空位、分肖特基缺陷2V^3-_Ti+3V²⁺_O形成能分别为最低;而当体系处在还原环境下时,氧空位逐渐成为主要缺陷,其形成能最低.由于四方相下存在较强的Ti—O键共价杂化,四方相下全肖特基缺陷V^2-_Ba关键词： 缺陷 第一性原理 3')" href="#">BaTiO₃     

Surface segregation in Nb-doped BaTiO3 films

We have used in situ photoemission spectroscopy to investigate Niobium doping in polycristalline BaTiO₃. The valence band maximum position progressively shifts from 2.5 eV for undoped to 2.84 eV for Nb-doped films. Ceramics and single crystal have been investigated for comparison with thin films. Nb-doped BaTiO₃ ceramics and Nb-doped SrTiO₃ single crystal show higher Fermi level position indicating that our doped films are less conducting regarding their bulk parents. This was confirmed by impedance spectroscopy under variable temperature. Large amount of niobium is clearly observable at surface but the amount of dopant is drastically reduced below the near-surface region, as evidenced by depth profile. Therefore, we provide evidence of surface segregation which would explain the contrasted resistivity values reported in literature for such donor-doped films.     

Ferroelectric behaviour of 30nm BaTiO3 ceramics prepared by high pressure assisted sintering

Dense nanocrystalline BaTiO3 ceramics with a homogeneous grain size of 30 nm was obtained by pressure assisted sintering. The ferroelectric behaviour of the ceramics was characterized by the dielectric peak at around 120 ℃, the P-E hysteresis loop and some ferroelectric domains. These experimental results indicate that the critical grain size for the disappearance of ferroelectricity in nanocrystalline BaTiO3 ceramics fabricated by pressure assisted sintering is below 30 nm. The ferroelectric property decreasing with decreasing grain size can be explained by the lowered tetragonality and the ＇dilution＇ effect of grain boundaries.     

Microstructure and electromagnetic characteristics of BaTiO3/Ni hybrid particles prepared by electroless plating

To improve the microwave absorption ability, hybrid particles containing both dielectric loss of BaTiO₃ and magnetic loss of Ni were fabricated via electroless Ni plating on BaTiO₃ particles. A continuous Ni coating was successfully covered on the surface of the BaTiO₃. The effect of the Ni content on complex permittivity, complex permeability, and microwave absorption properties of BaTiO₃/Ni hybrid particles was investigated. The real (?′) and imaginary (?″) parts of complex permittivity as well as imaginary part of complex permeability (μ″) were found to increase with an increase in Ni content, while the variation of the real part of complex permeability (μ′) with Ni content was non-linear. The microwave absorption performances could readily be tuned base on the changing Ni content of the hybrid particles. The optimal absorption performances were attained when the content of Ni reached 38.9 wt% in hybrid particles.     

Electrochemical characterization of Mn: Co3O4 thin films prepared by spray pyrolysis via aqueous route

Present investigation reports, spray pyrolytic deposition of Mn: Co₃O₄ thin films onto the stainless steel by spray pyrolysis, at the deposition temperature 573 ± 2 K via aqueous route. Prepared electrodes were characterized structurally and morphologically by means of XRD and SEM. Also optical and electrochemical characterizations were carried out in depth. Structural characterization confirms face centered cubic and tetragonal body centered crystal structures for Co₃O₄ and Mn₃O₄ respectively. The rough granular morphology is observed form SEM. Electrochemical study reveals the pseudo capacitive as well as double layer behavior with optimum specific capacitance 485.29 F/g at the scan rate 1 mV/s in 1 M KOH electrolyte. Specific energy, specific power and columbic efficiency were calculated using chronopotentiometric technique. Electrochemical impedance spectroscopy was carried out in the frequency range 1 mHz–1 MHz. Randles equivalent circuit parameters associated with the operative cell are reported.     

Co:BaTiO3/Si(100)纳米复合薄膜制备、微结构及其紫外光电子能谱研究

采用脉冲激光气相沉积(PLD)方法,在Si(100)晶面上制备了Co:BaTiO₃纳米复合薄膜.采用X射线衍射(XRD)结合透射电镜(TEM)方法研究了两种厚度Co:BaTiO₃纳米复合薄膜的晶体结构,当薄膜厚度约为30 nm时,薄膜为单一择优取向;当薄膜厚度约为100nm时,薄膜呈多晶结构.原子力显微镜(AFM)分析表明,当膜厚为30nm时,薄膜呈现明显的方形晶粒.采用紫外光电子能谱(UPS)研究了Co的价态和Co:BaTiO₃纳米复合薄 关键词： 3')" href="#">BaTiO₃ 纳米复合薄膜 紫外光电子能谱     

Co:BaTiO3/Si(100)纳米复合薄膜制备、微结构及其紫外光电子能谱研究

采用脉冲激光气相沉积(PLD)方法，在Si(100)晶面上制备了Co:BaTiO₃纳米复合薄膜.采用X射线衍射(XRD)结合透射电镜(TEM)方法研究了两种厚度Co:BaTiO₃纳米复合薄膜的晶体结构，当薄膜厚度约为30 nm时，薄膜为单一择优取向；当薄膜厚度约为100nm时，薄膜呈多晶结构.原子力显微镜(AFM)分析表明，当膜厚为30nm时，薄膜呈现明显的方形晶粒.采用紫外光电子能谱(UPS)研究了Co的价态和Co:BaTiO₃纳米复合薄     

横场-伊辛模型中BaTiO3的铁电行为

采用横场-伊辛模型描述了BaTiO₃中量子效应对铁电行为可能的贡献.计算显示量子效应可以明显地减少铁电体的自发极化.模型给出的理论结果与BaTiO₃的介电及极化实验结果符合较好. 关键词： 铁电性 量子效应 3')" href="#">BaTiO₃     

Magnetic field annealing effects on self-oriented BiFeO3 thin films prepared by chemical solution deposition

Self-oriented BiFeO₃ (BFO) thin films are prepared via chemical solution deposition method with magnetic field in-situ annealing process. The effects of magnetic annealing on the microstructure, magnetic and dielectric properties as well as magnetoelectric coupling effect of the BFO thin films are investigated. With increasing the annealing magnetic field, the crystallization quality, texture, grain boundary connectivity and densification of the films are enhanced, which is attributed to the improvement of connection and diffusion of components. The magnetization of the field-annealing films and dielectric constant as well as remanent polarization increases with increasing the strength of annealing magnetic field. In addition, it is observed that magnetocapacitance value of the magnetic-field-annealing BFO thin film is higher than the non-field-annealing one. Moreover the BFO thin films annealed at 3 kOe magnetic field show the magnetoelectric effect with 4% under 2 kOe at room temperature.     

X-ray photoelectron spectroscopic investigations on cubic BaTiO3, BaTi0.9Fe0.1O3 and Ba0.9Nd0.1TiO3 systems

X-ray photoelectron spectroscopic (XPS) studies were carried out on wet-chemically synthesized cubic BaTiO₃, Ba_0.9Nd_0.1TiO₃ and BaTi_0.9Fe_0.1O_3−δ powders. The compounds were prepared by hydrothermal and gel to crystallite conversion technique; and phases formed readily at 420 K. The phase purity of the powders was confirmed from X-ray diffractometry. Chemical state and chemical environment of the constituent elements in the compositions were examined by XPS. Ba²⁺ was found to exist in two different chemical environments in these titanates. The Ti 2p_3/2 photoelectron peak in BaTi_0.9Fe_0.1O_3−δ was found to be broadened after Fe³⁺ substitution. Any resolvable broadening was not observed distinctly in the Ti 2p peak for Ba_0.9Nd_0.1TiO₃, unsintered BaTiO₃ and BaTiO₃ annealed in hydrogen (8% H₂ + Ar) at 1000 K. The prevalence of mixed-valent titanium and iron in BaTi_0.9Fe_0.1O_3−δ composition was evident from the XPS results and was further supported by the enhanced electrical conductivity at 298-550 K for BaTi_0.9Fe_0.1O_3−δ in comparison to BaTiO₃ and Ba_0.9Nd_0.1TiO₃. Hydroxyl incorporation was facilitated by substituting Nd³⁺ in Ba-sublattice. The presence of hydroxyls was observed from the broadening of the O 1s peak in XPS studies of the compounds.     

掺铑BaTiO3单晶场致应变特性的研究

系统地研究了掺铑的BaTiO₃单晶在老化后的场致应变性能.研究发现，晶体的场 致应变随老化时间的增加而增大，在老化27天后，在300V/mm的电场下，其双向场致应变可达1.11％；在较小的测试频率下（0.01Hz）也可得到0.95％的可逆的巨大的单向场致应变，在低频范围内，晶体的单向场致应变随测试频率增大而减小；研究晶体老化后的电滞回线，发现其 形状类似于蜂腰磁滞回线.实验结果表明，对BaTiO₃单晶掺杂铑元素可以大大改 善其电致伸缩性能，可能产生新的在超大应变及非线性驱动器中的应用. 关键词： 3单晶')" href="#">BaTiO₃单晶 掺铑 场致应变 老化     

Dielectric properties and temperature stability of BaTiO3 co-doped La2O3 and Tm2O3

The influence of La₂O₃ and Tm₂O₃ co-doping on the dielectric properties and the temperature stability of BaTiO₃ was investigated. BaTiO₃ ceramics were prepared with the compositional formula of (Ba_1−xLa_x)(Ti_1-x/4−yTm_y)O₃. La₂O₃ and Tm₂O₃ co-doping in BaTiO₃ mainly had effects on an increase in the dielectric constant and the temperature stability, respectively. The increase of La₂O₃ concentration and the decrease of Tm₂O₃ concentration in BaTiO₃ resulted in a decrease of lattice parameter and tetragonality because La³⁺ ion substituting for Ba site is smaller than Ba²⁺ ion and Tm³⁺ ion substituting for Ti site is larger than Ti⁴⁺ ion. With the increase of La₂O₃ and the decrease of Tm₂O₃, the dielectric constant of BaTiO₃ was enhanced in spite of the reduction of tetragonality. P-E hysteresis measurements revealed that this phenomenon was based on the improvement of remanent polarization with the increase of La₂O₃ concentration. The introduction of excess Tm₂O₃ in BaTiO₃ suppressed the grain growth and BaTiO₃ ceramics showed higher temperature stability due to the stable tetragonal structure and the small grain size with the increase of Tm₂O₃ concentration.     

Effects of co-substitution on the electrical properties of BiFeO3 thin films prepared by chemical solution deposition

Ferroelectric BiFeO₃ thin films with Nd-Cr (or Sm-Cr) co-substitution (denoted by BNdFCr and BSmFCr, respectively) were deposited on the Pt(2 0 0)/TiO₂/SiO₂/Si(1 0 0) substrates by a chemical solution deposition method. X-ray diffraction patterns revealed the formation of BNdFCr and BSmFCr thin films without any secondary phases. The co-substituted BNdFCr (or BSmFCr) thin films, which were annealed at 550 °C for 30 min in N₂ atmosphere, exhibited enhanced electrical properties compared to BFO thin films with the remanent polarization (2P_r) and coercive electric field (2E_c) of 196, 188 μC/cm² and 600, 570 kV/cm with the electric field of 800 kV/cm, respectively. The leakage current densities of BNdFCr and BSmFCr thin films measured at room temperature were approximately three orders of magnitude lower than that of BFO thin film, and the leakage current at room temperature of the thin films exhibited three distinctive conduction behaviors. Furthermore, the values of pulse polarizations [i.e., +(P*-P^{^}) or −(P*-P^{^})] of BNdFCr and BSmFCr thin films were reasonably unchanged up to 1.4 × 10¹⁰ switching cycles.     

表面修饰的钛酸钡的拉曼光谱

采用水热法制得表面包裹有十二烷基苯磺酸(DBS)和硬脂酸(St)的BaTiO₃纳米粒子，平均粒径均为60nm左右.拉曼光谱检测结果表明，样品的确为表面包裹有表面活性剂(DBS或St)的BaTiO₃纳米粒子集合体.与未包裹的相比，各光学声子模对应的拉曼振动模式峰均发生了蓝移.还发现不同的包裹体，所导致的蓝移值也不同.从纳米粒子的表面结构及包裹层的压力出发对此现象进行了定性解释和讨论. 关键词： 拉曼光谱 3纳米粒子')" href="#">DBS/ BaTiO₃纳米粒子 蓝移     

金属有机分解法制备的SrTiO3薄膜的光学特性

采用金属有机分解法（MOD）在石英衬底上沉积了SrTiO3薄膜。所制备的薄膜是晶格常数为a=b=c=3.90?的多晶结构。通过测量190—1100nm波段内的透射光谱，采用包络方法计算了薄膜的光学常数（折射率n和消光系数k）。结果表明，采用MOD方法制备的薄膜的折射率大于采用射频磁控溅射、溶胶—凝胶和化学气相沉积方法制备的薄膜的折射率；薄膜的折射率色散关系满足单振子模型，其中振子强度S0为0.88′1014m-2，振子能量E0为6.40eV；薄膜的禁带宽度为3.68eV。     

The photoemission study of NdNiO3/NdGaO3 thin films, through the metal-insulator transition

The electronic structure of thin films NdNiO₃/NdGaO₃ with various thicknesses (from 17 nm to 150 nm), have been studied by photoemission spectroscopy at 300 K and 169 K. The XPS results are consistent with the literature ab initio calculations of the NdNiO₃ electronic structure. A noticeable variation attributed to the metal-insulator (MI) transition has been found only for the films with relatively high thickness (150 nm). Furthermore, the photoemission spectra and their temperature dependence have been discussed with regard to the results of dc electrical resistivity measurements which also exhibit large thickness dependence. Finally, these new results support a possible large hetero-epitaxial effect on the thinnest sample (17 nm) which could stress the NdNiO₃ structure and consequently makes its electronic structure nearly stabilized.     

Direct micropatterning of high dielectric BaTiO3 films by laser-induced pyrolysis with a nano-crystalline seeding technique

A direct patterning method of dielectric BaTiO₃ (BT) films is proposed, which applies laser-induced pyrolysis in combination with nano-crystalline seeding technique. A precursor solution of a BT complex alkoxide containing BT nano-crystalline particles with polyvinylpyrollidone (PVP) as dispersion stabilizer was spin-coated on Pt substrate. An Ar⁺ laser beam was focused and scanned on spin-coated BT films, which induced pyrolysis and crystallization of the films with spatial selectivity. Micropatterns were obtained by striping laser-unirradiated regions on the films with HCl aqueous solution. Raman spectra of the micropattern confirmed that the structures were tetragonal crystalline BT. Clear micropatterns with a line width of ca. 3 μm and an interval of 5 μm were formed at PVP concentrations of 25 and 50 kg/m³. The dielectric constant and dissipation factor of the film fabricated at a laser energy density of 27 MW/cm² and a scanning speed of 25 μm/s attained 76.2 and 0.07, respectively, for a measurement frequency of 100 kHz.