Fluorescence emission from photo-fragments after resonant S 2p excitations in H2S

Visible-UV fluorescence emission of gas-phase hydrogen sulfide, H(2)S, has been studied at the S 2p edge with synchrotron radiation excitation. Dispersed fluorescence measurements in the wavelength range 300-900 nm were taken at several photon energies corresponding to the excitations of the S 2p electrons to the unoccupied molecular and Rydberg orbitals. The spectra reveal fluorescence from the H, S, S(+), HS and HS(+) photo-fragments. H is found to be the strongest emitter at Rydberg excitations, while the emission from S(+) is dominant at the molecular resonances and above the S 2p ionization thresholds. The intensities of hydrogen Lyman-alpha (122 nm), Balmer-alpha (656 nm), Balmer-beta (486 nm) transitions as well as the visible-UV total fluorescence yield (300-900 nm) and the total ion yield were measured by scanning the photon energy in small steps across the S 2p edge. The different Balmer lines show some sensitivity to the specific core excitations, which is, however, not so strong as that recently observed in the water molecule [E. Melero García, A. Kivim?ki, L. G. M. Pettersson, J. Alvarez Ruiz, M. Coreno, M. de Simone, R. Richter and K. C. Prince, Phys. Rev. Lett., 2006, 96, 063003].     

Synthesis of D- and L-selenomethionine double-labeled with deuterium and selenium-82

The synthesis of D- and L-selenomethionine labeled with ?2Se and three deuteriums at Se-methyl group (D- and L-[2H?, ?2Se]selenomethionine) was described. D- And L-[2H?, ?2Se]selenomethionine were prepared by condensation of (R)- and (S)-2-amino-4-bromobutylic acid with lithium [2H?, ?2Se]methaneselenolate, which was prepared from metal (82)Se and [2H?]methyl iodide. The optical purities of D- and L-[2H?, ?2Se]selenomethionine were determined by HPLC with a chiral stationary phase column and were found more than 99% ee. The chemical ionization mass spectra showed that the molecular related ion for N-isobutyloxycarbonyl ethyl ester derivatives of [2H?, ?2Se]selenomethionine did not overlap with the m/z values known from that of non-labeled selenomethionine.     

Creation of active sites by impregnation of carbon fibers: application to the fixation of hydrogen sulfide

Activated carbon fibers, which exhibit high specific area and numerous active surface sites, constitute very powerful adsorbents and are widely used in filtration to eliminate pollutants from liquid or gaseous effluents. The fibers studied in this work are devoted to the filtration of gaseous effluent containing very small amounts (few vpm) of hydrogen sulfide. Preliminary experiments evidenced that these fibers weakly adsorb hydrogen sulfide. To improve their fixation capacity toward H(2)S the activated fibers are impregnated in an aqueous solution of potassium hydroxide. The impregnation treatment usually takes place before activation but in this work it occurs at room temperature after activation of the fibers. A further thermal treatment is performed to increase the efficiency of the system. The overall treatment leads to the creation of basic sites showing a great activity for H(2)S gas in the presence of water vapor. The mechanism has been established by a series of characterizations before, during, and after the different operation units. The KOH deposited after impregnation is carbonated into KHCO(3) at room temperature and then decomposed into K(2)CO(3) during the thermal treatment. K(2)CO(3) and H(2)S dissolve in a liquid aqueous solution formed on the fiber surface. Then carbonate ions and H(2)S molecules react together almost completely to yield HS(-) species. As a consequence the sorption capacities of hydrogen sulfide on the impregnated fibers are much higher, even for small hydrogen sulfide volume fractions.     

Modification of iodometric determination of total and reactive sulfide in environmental samples

In iodometric determination of sulfide two reactions are taking place when alkaline solution is added to HCl acid-iodine. The main oxidation reaction (1), H(2)S+I(2)=2HI+S; and side reaction of sulfide (2), S(-2)+4I(2)+8OH(-)=SO(4)(2-)+8I(-)+4H(2)O. Preference of reaction (2) over (1) is dependent on pH increasing to >7. When sulfide solution of pH 9 was mixed with HCl acid-iodine, the recovery exceeded 120%, but the recovery of a solution with a pH of 13 exceeded 200%. To eliminate the side reaction in iodometric titration, the sulfide solution must be acidic when it is mixed with HCl-iodine. To avoid the side reaction (2), the pH of sulfide solutions were adjusted with acetic acid to pH 5.5, mixed with HCl-iodine solution and then titrated with standard thiosulfate with precision and accuracy <+/-3%.     

Relationships between LC retention, octanol-water partition coefficient, and fungistatic properties of 2-(2,4-dihydroxyphenyl)benzothiazoles

The retention behavior of newly synthesized compounds with antimycotic activity from the 2-(2,4-dihydroxyphenyl)benzothiazole group by high-performance liquid chromatography has been investigated. RP-18 stationary phase and methanol-acetate buffer aqueous mobile phases at pH 4 and 7.4 have been used. In the case of the mobile phase at pH 7.4, higher concentrations of water can be applied than at pH 4. The studied compounds showed regular retention behavior, their log k values decreasing linearly with an increasing concentration of methanol in the mobile phase. On the basis of these relationships, the lipophilicity (log kw), specific hydrophobic surface area (S), and isocratic chromatographic hydrophobicity index (psi0) were determined. Similar log kw values and sensitivity to changes in the structure of compounds studied for both mobile phases have been found. Moderate correlations between the chromatographic parameters and the calculated octanol-water log P values were found. Finally, the lipophilicity parameters were compared with the fungistatic properties of compounds expressed by log MIC (minimum inhibitory concentration) values to find quantitative structure activity relationship equations.     

Reactivity of a cytostatic active N,N-donor-containing dinuclear Pt(II) complex with biological relevant nucleophiles

A dinuclear platinum(II) complex that was recently investigated in our group was tested for its cytostatic activity and found to be active against HeLa S3 cells. The complex consists of a bidentate N,N-donor chelating ligand system in which the two platinum centers are connected by an aliphatic chain of 10 methylene groups. The complex [Pt(2)(N(1),N(10)-bis(2-pyridylmethyl)-1,10-decanediamine)(OH(2))(4)](4+) (10NNpy) is of further special interest, since only little is known about the substitution behavior of such dinuclear platinum complexes that contain a bidentate coordination sphere. The complex was investigated using different biologically relevant nucleophiles, such as thiourea (tu), L-methionine (L-Met), glutathione (GSH), and guanine-5'-monophosphate (5'-GMP), at two different pH values (2 and 7.4). The substitution of coordinated water by these nucleophiles was studied under pseudo-first-order conditions as a function of nucleophile concentration, temperature, and pressure, using stopped-flow techniques and UV-vis spectroscopy. The reactivity of 10NNpy with the selected nucleophiles was found to be tu ? 5'-GMP > L-Met > GSH at pH 2 and GSH > tu > L-Met at pH 7.4. The results for the dinuclear 10NNpy complex were compared to those for the corresponding mononuclear reference complex [Pt(aminomethylpyridine)(OH(2))(2)](2+), Pt(amp), studied before in our group, by which the effect of the addition of an aliphatic chain, an increase in the overall charge, and a shift in the pK(a) values of the coordinated water ligands could be investigated. The reactivity order for Pt(amp) was found to be tu > GSH > L-Met at pH 7.4.     

石墨电极上硫化钠的阳极氧化机理探索

电解硫化氢气体的碱性吸收液（Ｎａ２Ｓ表示）产生单质硫和氢气的研究是治理硫化氢废气的一种新方法［１ -７］,较之Ｃｌａｕｓ法有许多优点［３,４］,这对环境保护和资源回收均具有重要的实际意义．文献对硫化物水溶液电化学氧化机理的研究主要着重于在某些贵金属阳极上,包括某些硫化矿的湿法冶金反应过程的研究［８,９］,光电化学电池中使用多硫化物的研究［１０ -１３］,以及硫化物电解时产生单质硫的电催化活性研究［１４］等 ;但在石墨阳极上硫化物电化学氧化机理的研究报导却很少［３,４］．本文研究在石墨阳极上硫化钠水溶液…     

Synthesis, characterization, and cytotoxic activity of novel potentially pH-sensitive nonclassical platinum(II) complexes featuring 1,3-dihydroxyacetone oxime ligands

The reaction of 1,3-dihydroxyacetone oxime with diam(m)minediaquaplatinum(II) under basic conditions produced zwitterionic diam(m)mine(3-hydroxy-2-(oxidoimino)propan-1-olato-κ(2)N,O)platinum(II) complexes featuring the N,O-chelating ligand. Upon reaction with hydrochloric acid, it was possible to isolate either the singly protonated species still exhibiting the intact N,O-chelate or the open-chain chlorido complex. All complexes were characterized in detail with multinuclear ((1)H, (13)C, and (195)Pt) NMR spectroscopy, ESI mass spectrometry, and in one case X-ray diffraction. Cytotoxicity was investigated in three human cancer cell lines (CH1, SW480, and A549). The obtained IC(50) values are in the medium or even low micromolar range, remarkable for platinum complexes having N(3)O or N(3)Cl coordination spheres. To study the solution behavior of the prepared complexes at physiologically relevant proton concentrations, time-dependent (1)H NMR measurements were performed for the ethane-1,2-diamine-containing series at pH values of 7.4, 6.0, and exemplarily 5.0. While the zwitterionic complex proved to be stable at both pH 7.4 and 6.0, the protonated species were deprotonated at pH 7.4, tending toward ring opening in slightly acidic environments, as characteristic for many solid tumors. Finally, the open-chain form stayed intact at pH 6.0, being completely converted into its chelated analogue at pH 7.4. A pH-dependent evaluation of antiproliferative effects of the two latter complexes at pH 7.4 and pH 6.0 revealed an activation under slightly acidic conditions, which might be of interest for further in vivo studies.     

Temperature dependent thermodynamic model of the system H(+)-NH₄(+)-Na(+)-SO₄²⁻-NO₃⁻-Cl⁻-H₂O

A thermodynamic model of the system H(+)-NH?(+)-Na(+)-SO?2?-NO??-Cl?-H?O is parametrized and used to represent activity coefficients, equilibrium partial pressures of H?O, HNO?, HCl, H?SO?, and NH?, and saturation with respect to 26 solid phases (NaCl(s), NaCl·2H?O(s), Na?SO?(s), Na?SO?·10H?O(s), NaNO?·Na?SO?·H?O(s), Na?H(SO?)?(s), NaHSO?(s), NaHSO?·H?O(s), NaNH?SO?·2H?O(s), NaNO?(s), NH?Cl(s), NH?NO?(s), (NH?)?SO?(s), (NH?)?H(SO?)?(s), NH?HSO?(s), (NH?)?SO?·2NH?NO?(s), (NH?)?SO?·3NH?NO?(s), H?SO?·H?O(s), H?SO?·2H?O(s), H?SO?·3H?O(s), H?SO?·4H?O(s), H?SO?·6.5H?O(s), HNO?·H?O(s), HNO?·2H?O(s), HNO?·3H?O(s), and HCl·3H?O(s)). The enthalpy of formation of the complex salts NaNH?SO?·2H?O(s) and Na?SO?·NaNO?·H?O(s) is calculated. The model is valid for temperatures < or approximately 263.15 up to 330 K and concentrations from infinite dilution to saturation with respect to the solid phases. For H?SO?-H?O solutions the degree of dissociation of the HSO?? ion is represented near the experimental uncertainty over wide temperature and concentration ranges. The parametrization of the model for the subsystems H(+)-NH?(+)-NO??-SO?2?-H?O and H(+)-NO??-SO?2?-Cl?-H?O relies on previous studies (Clegg, S. L. et al. J. Phys. Chem. A 1998, 102, 2137-2154; Carslaw, K. S. et al. J. Phys. Chem. 1995, 99, 11557-11574), which are only partly adjusted to new data. For these systems the model is applicable to temperatures below 200 K, dependent upon liquid-phase composition, and for the former system also to supersaturated solutions. Values for the model parameters are determined from literature data for the vapor pressure, osmotic coefficient, emf, degree of dissociation of HSO??, and the dissociation constant of NH? as well as measurements of calorimetric properties of aqueous solutions like enthalpy of dilution, enthalpy of solution, enthalpy of mixing, and heat capacity. The high accuracy of the model is demonstrated by comparisons with experimentally determined mean activity coefficients of HCl in HCl-Na?SO?-H?O solutions, solubility measurements for the quaternary systems H(+)-Na(+)-Cl?-SO?2?-H?O, Na(+)-NH?(+)-Cl?-SO?2?-H?O, and Na(+)-NH?(+)-NO??-SO?2?-H?O as well as vapor pressure measurements of HNO?, HCl, H?SO?, and NH?.     

铬取代杂多阴离子PW11O39Cr（Ⅲ）（H2O）4-可见光催化降解罗丹明B

为了利用太阳光能去除水体有机染料污染物,以Keggin型铬取代杂多阴离子PW11O39Cr(III)(H2O)4-(PW11Cr)为光催化剂, 详细研究在可见光照射下PW11Cr对水体有机染料污染物罗丹明B(RhB)的光催化降解作用, 考察RhB和PW11Cr初始浓度以及溶液pH对RhB可见光催化降解速率的影响, 并通过可见吸收光谱和荧光发射光谱研究水溶液中PW11Cr和RhB的相互作用, 提出PW11Cr光催化作用的机理. 实验结果表明,含有50 μTTmol·L-1 PW11Cr和10 μTTmol·L-1 RhB的水溶液在200 W可见光下照射120 min, RhB的降解率达到100%,总有机碳去除率约32%. 在PW11Cr浓度较大和pH<3.5的酸性条件下, PW11Cr与RhB之间易发生络合, 导致RhB光降解速率变慢,而PW11Cr浓度为50 μTTmol·L-1和溶液接近中性条件下, RhB的光降解速率较快.     

Condensation and structure of silicic acid in tetrahydrofuran

Silicic acid (SA) was extracted with THF from aqueous sodium metasilicate (SMS) solutions neutralized with hydrochloric acid, followed by silylation to give silylated SA from which the condensation and structure of SA in tetrahydrofuran (THF) were investigated. The degree of extraction markedly depends on SA and HCl concentrations. The condensation of 0.86 and 3.5 mol/L SA-THF solutions was followed by measuring the viscosity of the solutions at 0 and 20°C. The silylated SA was isolated as a distillate (LS) and a residue (HS) with low and high M?_ns (ca. 1300 and 3800) by vacuum distillation. The ratio of LS against HS decreased as a SA concentration in THF increased. In an aqueous solution, SA exists as lower molecular weight SAs compared with those in THF. SAs such as monomer, dimer, cyclic tri- and tetramer were the main components in a 0.1 mol/L aqueous solution. On the extraction with THF from an aqueous solution, SA was found to undergo condensations to form more polymerized SAs. From the THF solutions of SA concentration above 0.5 mol/L, the HS was obtained as a main component (73%) which was expected to have ladder-like structures. © 1992 John Wiley & Sons, Inc.     

Characterisation of structure and aggregation processes of aquatic humic substances using small-angle scattering and X-ray microscopy

Aquatic humic substances (HS), an important part of the dissolved organic carbon in freshwater systems, are polyfunctional natural compounds with polydisperse structure showing strong aggregation/coagulation behaviour at high HS concentrations and in the presence of metal ions. In this study, small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS) and X-ray microscopy (XRM) were applied to characterise the structure and aggregation processes of HS in solution. In SAXS and XRM the high brilliant synchrotron radiation was used as X-ray source. Applying small-angle scattering, information about the size distribution and shape of aquatic HS was obtained. Spherical HS units were found which were stable in a wide concentration range in a kind of "monomeric" state almost independent of pH and ionic strength. At higher concentrations they formed chain-like agglomerates or disordered HS structures. In studies on the coagulation behaviour of HS after addition of copper ions, a linear relationship between Cu(2+) concentration and the formation of large disordered HS-Cu(2+) agglomerates was obtained. By using X-ray microscopy, single "huge" particles were found in older solutions and in solutions with high HS concentrations. Over a threshold Cu(2+) concentration of approx. 300 mg/L, the formation of an extensive HS-Cu(2+) network structure was observed within a few minutes. The presented structures show the ability of the methods used to characterise processes between diluted phase and suspended matter, which play an important role particularly in the region of phase interfaces.     

Highly luminescent half-lantern cyclometalated platinum(II) complex: synthesis, structure, luminescence studies, and reactivity

The half-lantern compound [{Pt(bzq)(μ-C(7)H(4)NS(2)-κN,S)}(2)]·Me(2)CO (1) was obtained by reaction of equimolar amounts of potassium 2-mercaptobenzothiazolate (KC(7)H(4)NS(2)) and [Pt(bzq)(NCMe)(2)]ClO(4). The Pt(II)···Pt(II) separation in the neutral complex [{Pt(bzq)(μ-C(7)H(4)NS(2)-κN,S)}(2)] is 2.910 (2) ?, this being among the shortest observed in half-lantern divalent platinum complexes. Within the complex, the benzo[h]quinoline (bzq) groups lie in close proximity with most C···C distances being between 3.3 and 3.7 ?, which is indicative of significant π-π interactions. The reaction of 1 with halogens X(2) (X(2) = Cl(2), Br(2), or I(2)) proceeds with a two-electron oxidation to give the corresponding dihalodiplatinum(III) complexes [{Pt(bzq)(μ-C(7)H(4)NS(2)-κN,S)X}(2)] (X = Cl 2, Br 3, I 4). Their X-ray structures confirm the retention of the half-lantern structure and the coordination mode of the bzq and the bridging ligand μ-C(7)H(4)NS(2)-κN,S. The Pt-Pt distances (Pt-Pt = 2.6420(3) ? 2, 2.6435(4) ? 3, 2.6690(3) ? 4) are shorter than that in 1 because of the Pt-Pt bond formation. Time dependent-density functional theory (TD-DFT) studies performed on 1 show a formal bond order of 0 between the metal atoms, with the 6p(z) contribution diminishing the antibonding character of the highest occupied molecular orbital (HOMO) and being responsible for an attractive intermetallic interaction. A shortening of the Pt-Pt distance from 2.959 ? in the ground state S(0) to 2.760 ? in the optimized first excited state (T(1)) is consistent with an increase in the Pt-Pt bond order to 0.5. In agreement with TD-DFT calculations, the intense, structureless, red emission of 1 in the solid state and in solution can be mainly attributed to triplet metal-metal-to-ligand charge transfer ((3)MMLCT) [dσ*(Pt-Pt) → π*(bzq)] excited states. The high quantum yields of this emission measured in toluene (44%) and solid state (62%) at room temperature indicate that 1 is a very efficient and stable (3)MMLCT emitter, even in solution. The high luminescence quantum yield of its red emission, added to its neutral character and the thermal stability of 1, make it a potential compound to be incorporated as phosphorescent dopant in multilayer organic light-emitting devices (OLEDs).     

Thermodynamic quantities relative to solution processes of Naproxen in aqueous media at pH 1.2 and 7.4

Based on van’t Hoff and Gibbs equations, the thermodynamic functions Gibbs free energy, enthalpy, and entropy of solution, mixing and solvation of naproxen (NAP) in water at pH 1.2 and 7.4, were evaluated from solubility values determined at several temperatures. The solubility at pH 7.4 and 25.0°C was almost 150 times higher with respect to pH 1.2. The enthalpies of solution were positive and greater for pH 1.2, while the entropies of solution were both negative, thereby implying a greater molecular organization at pH 7.4. The results were discussed in terms of solute–solvent interactions.     

Comparison of in silico models for prediction of Daphnia magna acute toxicity

Eight in silico modelling packages were evaluated and compared for the prediction of Daphnia magna acute toxicity from the viewpoint of the European legislation on chemicals, REACH. We tested the following models: Discovery Studio (DS) TOPKAT, ACD/Tox Suite, ADMET Predictor?, ECOSAR (Ecological Structure Activity Relationships), TerraQSAR?, T.E.S.T. (Toxicity Estimation Software Tool) and two models implemented in VEGA on 480 industrial compounds for 48-h median lethal concentrations (LC₅₀) to D. magna, matching them with experimental values. The quality of the estimates was compared using a standard statistical review and an additional classification approach in which the hazard predictions were grouped using well-defined regulatory criteria. The regression parameters, correlation coefficient being the most influential, showed that four models (ADMET Predictor?, DS TOPKAT, TerraQSAR? and VEGA DEMETRA) had similar reliability. These performed better than the others, but the coefficient of determination was still low (r² around 0.6), considering that at least half the predicted compounds were inside the training sets. Additionally, we grouped the results in four defined toxicity classes. TerraQSAR? gave 60% of correct classifications, followed by DS TOPKAT, ADMET Predictor? and VEGA DEMETRA, with 56%, 54% and 48%, respectively. These results highlight the challenges associated with developing reliable and easily applied acceptability criteria for the regulatory use of QSAR models to D. magna acute toxicity.     

Study on Cyclometalated Palladium-azo Complexes as Colorimetric Probes for Hazardous Gas in Water

A synthesized cyclometalated palladium-azo complex was explored as a multifunctional probe for visual detection of SO2, H2S and NH3 in water. In acidic aqueous environment, the sensing solution underwent a sharp color change from poor violet to deep blue when titrated with Na2SO3 standard solution. But the color changed from poor violet to bright yellow when titrated with Na2S standard solution. In basic environment, the sensing solution rapidly changed to magenta when titrated by NH4Cl-NH3 standard buffer solution at high concentration. However, the color of sensing solution changed to blue when titrated by NH4Cl-NH3 standard buffer solution at low concentration although the pH was kept constant during the titration. Different species of these hazardous gases at environmentally relevant concentration levels were differentiated by independent optical signal outputs, and the interference from other inorganic ions commonly existing in water was very small.     

Capillary electrophoretic study on pH dependence of enantioselective disopyramide binding to genetic variants of human alpha1-acid glycoprotein

A high-performance frontal analysis-capillary electrophoresis (HPFA-CE) method was applied to investigate the effect of pH on the drug binding properties of genetic variants of human alpha1-acid glycoprotein (AGP), A variant and a mixture of F1S variants. The unbound concentrations of a model basic drug, disopyramide (DP), in A variant solutions and in F1S variant solutions were measured by HPFA-CE to evaluate binding constants at pH 4.0, 5.0, 6.0 and 7.4. The binding between DP and A variant was gradually weakened by acidification of background buffer (from pH 7.4 to 4.0), while the binding between DP and FIS variants decreased at first (from pH 7.4 to 6.0), and then gained (from pH 6.0 to 4.0). Consequently, DP was more strongly bound to A variant than to FIS variants at pH 7.4, while at pH 4.0 DP was more strongly bound to F1S variants. At any pH (S)-DP was bound more strongly than (R)-DP, and the enantioselectivity of A variant was significantly higher than that of F1S variants. Electrophoretic mobilities of the AGP genetic variants decreased along with a decrease in pH. Fluorescent emission of these genetic variants indicated a distinct conformational change between pH 5.0 and 4.0. However, there was no significant difference in the electrophoretic mobility and the fluorescent emission spectrum between these variants at any pH. On the other hand, circular dichroism analyses revealed that beta-sheet content in FIS variants diminished as pH decreased, while that in A variant increased. These results suggest that the conformational change induced by acidification of background buffer differs between these genetic variants, and this causes the difference in DP bindability.     

Thermodynamic and kinetic behaviour of [Pt(2-methylthiomethylpyridine)(OH2)2]2+

The diaqua complex [Pt(2-methylthiomethylpyridine)(OH(2))(2)](2+), Pt(mtp), was synthesized and investigated thermodynamically as well as kinetically. Spectrophotometric acid-base titrations were performed to determine the pK(a) values of the two coordinated water ligands. A low pK(a1) value of 3.15 was observed for the water molecule trans to the pyridine donor, whereas a pK(a2) value of 6.84 was found for the water molecule trans to the labilising sulphur donor. The substitution of coordinated water by a series of sterically hindered S-containing nucleophiles, viz. thiourea (tu), N,N'-dimethylthiourea (dmtu) and N,N,N',N'-tetramethylthiourea (tmtu), was studied under pseudo first-order conditions as a function of nucleophile concentration, pH (2, 4.75, 7.4), temperature and pressure, using stopped-flow techniques and UV-vis spectroscopy. In general the first substitution reaction takes place trans to the sulphur donor. At pH 2 the nucleophiles react in the order tu (634 ± 10) > dmtu (507 ± 5) ? tmtu (165 ± 3 M(-1) s(-1) at 25 °C), which is caused by steric hindrance. The second observed reaction involves two steps, viz. the displacement of the second water ligand and dechelation of the pyridine ring with the third-order rate constants 73.3 ± 0.8 (tu), 22.1 ± 0.1 (dmtu) and 6.8 ± 0.2 M(-2) s(-1) (tmtu) at 25 °C. At pH 4.75 the reactions are in general slower due to the presence of aqua-hydroxo species. The same order in reactivity was found, viz. tu (106 ± 1) > dmtu (72 ± 1) ? tmtu (14.1 ± 0.5 M(-1) s(-1) at 25 °C). No evidence for ring-dechelation could be observed under these conditions. At pH 7.4 the inert dihydroxo species is predominantly present in solution and consequently no substitution reaction was observed. Quantum chemical calculations were performed to support the interpretation and discussion of the experimental results.     

TiO2薄膜光催化降解4-(2-吡啶偶氮)间苯二酚的研究

为了探索有机物４－（２－吡啶偶氮）间苯二酚（ＰＡＲ）,在固定光催化剂上的降解行为,采用溶胶一凝胶法,在玻璃表面制得均匀透明的纳米ＴｉＯ２薄膜,并以其作光催化剂,在２５４ｎｍ紫外光照射下,进行ＰＡＲ水溶液的光催化降解研究。研究了ＰＡＲ光催化降解率与溶液ｐＨ值、ＰＡＲ初始浓度、助催化剂（Ｈ２Ｏ２）浓度和不同光照条件的变化关系,得出了ＴｉＯ２薄膜的光催化降解ＰＡＲ的有利条件。