Evaluation of measurement uncertainty in the elemental analysis of sintered silicon carbide using laser ablation in liquid—inductively coupled plasma mass spectrometry with external calibration and isotope dilution

Accreditation and Quality Assurance - The goal of this study was to evaluate the uncertainty of elemental analytical methods that use laser ablation in liquid (LAL) as a pretreatment. After LAL...     

Direct elemental analysis of biodiesel by inductively coupled plasma–mass spectrometry

An ICP–MS instrument fitted with an octopole reaction system (ORS) was used to directly measure the inorganic contents of several biofuel materials. Following sample preparation by simple dilution in kerosene, the biofuels were analysed directly. The ORS effectively removed matrix- and plasma-based spectral interferences to enable measurement of all important analytes, including sulfur, at levels below those possible by ICP–OES. A range of commonly produced biofuels was analysed, and spike recovery and long-term stability data was acquired. Suitably configured ICP–MS has been shown to be a fast and very sensitive technique for the elemental analysis of biofuels.     

Ultra-sensitive quantification of lysozyme based on element chelate labeling and capillary electrophoresis–inductively coupled plasma mass spectrometry

In this study, an ultra-sensitive method for the quantification of lysozyme based on the Gd³⁺ diethylenetriamine-N,N,N′,N″,N″-pentaacetic acid labeling and capillary electrophoresis–inductively coupled plasma mass spectrometry (CE–ICP–MS) was described. The Gd³⁺-tagged lysozyme was effectively separated by capillary electrophoresis (CE) and sensitively determined by inductively coupled plasma mass spectrometry (ICP–MS). Based on the gadolinium-tagging and CE–ICP–MS, the lysozyme was determined within 12 min with an extremely low detection limit of 3.89 attomole (3.89 × 10⁻¹¹ mol L⁻¹ for 100 nL of sample injection) and a RSD < 6% (n = 5). The proposed method has been successfully used to detect lysozyme in saliva samples with a recovery of 91–106%, suggesting that our method is sensitive and reliable. The success of the present method provides a new potential for the biological assays and sensitive detection of low-abundant proteins.     

Optimization of a laser ablation-inductively coupled plasma “time of flight” mass spectrometry system for short transient signal acquisition

Simultaneous ion sampling and sequential detection offered by inductively coupled plasma ‘time of flight’ mass spectrometry (ICP-TOFMS) provides advantages for the analysis of short transient concentration-variable signals as produced in laser ablation. In order to investigate the capabilities of ICP-TOFMS in combination with an excimer laser ablation system, ablation studies on reference materials and geological samples were carried out. Various ICP-TOFMS parameters were optimized for laser-induced aerosols. Transverse rejection ion pulse was used to extend the dynamic range in concentration. A reduced volume ablation cell was designed and used in order to increase the sample density in the ICP. Results for 63 simultaneously measured isotopes (SRM 610 from NIST) lead to limits of detection in the 1–100 μg/g range for a 80 μm crater diameter (10 Hz, 1.2 mJ pulse energy). The reproducibility of signal ratios was determined to be better than 2% RSD for transient signals using 102 ms integration time. These optimized parameters were then used for the analysis of tin-rich fluid inclusions. Preliminary results of multielement analysis and isotopic ratio determinations on individual fluid inclusions (63 isotopes, 102 ms integration time) demonstrate the capabilities of ICP-TOFMS in combination with laser ablation. Received: 6 March 2000 / Revised: 11 May 2000 / Accepted: 14 May 2000     

Geographic characterization of Greek wine by inductively coupled plasma–mass spectrometry macroelemental analysis

Abstract

Studying wine mineral profile has been proven as a valuable tool in geographical origin discrimination and authenticity for both producers and consumers. Adulteration of wines, in terms of geographical origin or variety, is considered a major topic of extensive research. Traceability and authenticity of wines have been previously studied on the basis of typical mineral element patterns by means of chemometric methods. In this context, analytical methods were developed for the determination of mineral elements in wines by inductively coupled plasma–mass spectrometry. This study aimed at classifying selected varietal Greek wines from various regions by employing instrumental analysis. Preliminary data of wine mineral content enabled for the classification of samples according to geographical origin and variety. However, further work is required in order to draw more valid conclusions and to obtain a detailed map of the mineral element content of Greek wines according to their geographical origin and/or variety.     

Trace elemental analysis of automotive paints by laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS)

Paints and coatings are frequently encountered as types of materials that are submitted to forensic science laboratories as a result of trace evidence transfers. The aim of this study was to develop a method to complement the commonly used techniques in a forensic laboratory in order to better characterize these samples for forensic purposes. A laser ablation method has been used to simultaneously sample several layers directly prior to introduction into an inductively coupled plasma-mass spectrometer for the detection and quantification of the trace metals present in the layer(s). Time-resolved analysis plots displaying the elemental response and quantification of selected metals are compared to associate/discriminate paint samples. Matrix-matched standards were successfully incorporated into the analysis scheme for quantification of lead in the solid paint samples. Preparation of new matrix-matched standards for quantification of additional elements developed for this study are also presented. A sample set of eighteen (18) survey automotive paint samples have been analyzed with the developed method in order to determine the utility of LA-ICP-MS for trace element analysis of paints.     

Scanning vs. single spot laser ablation (λ=213 nm) inductively coupled plasma mass spectrometry

Sampling strategy is defined in this work as the interaction of a repetitively pulsed laser beam with a fixed position on a sample (single spot) or with a moving sample (scan). Analytical performance of these sampling strategies was compared by using 213 nm laser ablation ICP-MS. A geological rock (Tuff) was quantitatively analyzed based on NIST series 610-616 glass standard reference materials. Laser ablation data were compared to ICP-MS analysis of the dissolved samples. The scan strategy (50 μm/s) produced a flat, steady temporal ICP-MS response whereas the single spot strategy produced a signal that decayed with time (after 60 s). Single-spot sampling provided better accuracy and precision than the scan strategy when the first 15 s of the sampling time was eliminated from the data analysis. In addition, the single spot strategy showed less matrix dependence among the four NIST glasses.     

Speciation analysis of arsenic in prenatal and children's dietary supplements using microwave-enhanced extraction and ion chromatography–inductively coupled plasma mass spectrometry

A study was conducted to develop a microwave-enhanced extraction method for the determination of arsenic species in prenatal and children's dietary supplements prepared from plant materials. The method was optimized by evaluating the efficiency of various solutions previously used to extract arsenic from the types of plant materials used in the dietary supplement formulations. A multivitamin standard reference material (NIST SRM 3280) and a prenatal supplement sample were analyzed in the method optimization. The identified optimum conditions were 0.25 g of sample, 5 mL of 0.3 mol L⁻¹ orthophosphoric acid (H₃PO₄) and microwave heating at 90 °C for 30 min. The extracted arsenic was speciated by cation exchange ion chromatography–inductively coupled plasma mass spectrometry (IC–ICP-MS). The method detection limit (MDL) for the arsenic species was in the range 2–8 ng g⁻¹. Ten widely consumed prenatal and children's dietary supplements were analyzed using the optimized protocol. The supplements were found to have total arsenic in the concentration range 59–531 ng g⁻¹. The extraction procedure recovered 61–92% of the arsenic from the supplements. All the supplementary products were found to contain arsenite (As³⁺) and dimethylarsinic acid (DMA). Arsenate (As⁵⁺) was found in two of the supplements, and an unknown specie of arsenic was detected in one product. The results of the analysis were validated using mass balance by comparing the sum of the extracted and non-extracted arsenic with the total concentration of the element in the corresponding samples.     

Particle size characterization of titanium dioxide in sunscreen products using sedimentation field-flow fractionation–inductively coupled plasma–mass spectrometry

Sedimentation field-flow fractionation–inductively coupled plasma–mass spectrometry (SdFFF-ICP-MS) was successfully applied to investigate particle size distribution of titanium dioxide (TiO₂) in sunscreen samples after hexane extraction to remove organic components from the samples. Three brands of sunscreen products of various sun protection factor (SPF) value were used as samples. Different particle size distribution profiles were observed for sunscreen samples of various brands and SPF values; however, the particle size distributions of titanium dioxide in most sunscreen samples investigated in this work were larger than 100 nm. The titanium dioxide concentrations were higher for the products of higher SPF values. By comparing the results obtained from online SdFFF-ICP-MS and those from the off-line ICP-MS determination of titanium after acid digestion, ICP-MS was found to effectively atomize and ionize the titanium dioxide particle without the need for acid digestion of the samples. Therefore, the online coupling between SdFFF and ICP-MS could be effectively used to provide quantitative information of titanium dioxide concentrations across particle size distribution profiles.     

An accurate and reliable analysis of trimethylamine using thermal desorption and gas chromatography–time of flight mass spectrometry

Trimethylamine (TMA) is well-known for manifesting the odor of rotting fish and urine. The analysis of TMA in environmental samples generally suffers from low reproducibility and poor sensitivity. In this study, a technique for the quantitative analysis of gas phase TMA was developed using thermal desorption (TD)-gas chromatography (GC)-time of flight mass spectrometry (TOF-MS). This new approach yielded good linearity (R² = 0.9930), precision (RSE = 1.59%), and high sensitivity with the method detection limit (MDL) of 51 pg, i.e., detection of 0.021 ppb of TMA at 1 L sample (limit of detection (LOD): 5.32 pg (0.002 ppb). This method was tested against gas samples collected from two representative sources of TMA: (1) rotten thornback fish and (2) cat urine-soaked clay. The concentration of TMA in these samples, when analyzed after treatment at varying dilution ratios, averaged 293 ± 29.7 ppm (RSE = 3.82%) and 74.1 ± 5.78 ppb (RSE = 3.19%), respectively. The feasibility of this approach, when tested with TD–GC–Quadruple (Q) MS, showed a good compatibility with moderately reduced sensitivity. The results of this study demonstrated that one can achieve highly reliable and reproducible analysis of TMA from environmental samples when using thermal desorption (for pretreatment) and detection (by the TOF or Q-MS system).     

Use of pneumatic nebulization and laser ablation–inductively coupled plasma–mass spectrometry to study the distribution and bioavailability of an intraperitoneally administered Pt-containing chemotherapeutic drug

Quadrupole-based inductively coupled–mass spectrometry (ICP-MS) with pneumatic nebulization as a means of sample introduction was employed for quantification of platinum in blood and tissue samples of rats with peritoneal carcinomatosis, receiving intraperitoneal treatment with the Pt-containing chemotherapeutic drug oxaliplatin, and in the perfusate solution used for this purpose. The Pt levels were measured for various treatment conditions, i.e., with and without supporting treatment with the drug bevacizumab and at two different temperatures. Limits of detection obtained for platinum in blood and tissue samples were 0.3 and 2.0 pg g_,⁻¹ respectively. Evaluation of drug penetration into the tumor, under different conditions of treatment, was carried out via laser ablation–ICP-MS. Quantitative mapping of the Pt distribution in tissue sections of rat was attempted relying on gelatin standards. The results show an influence of the temperature at which the treatment is carried out, while supporting administration of the drug bevacizumab did not seem to affect the results.     

Intercomparison study of inductively coupled plasma mass spectrometry, thermal ionization mass spectrometry and fission track analysis of µBq quantities of 239Pu in synthetic urine

Even today, some Marshall Islanders are looking forward to permanentlyresettling their islands after five decades. The U.S. Department of Energyand the resettled residents require reasonable but cost-prudent assurancethat the doses to residents from residual ²³⁹Pu will not exceedrecognized international standards or recommendations, as estimated from theexcretion of ²³⁹Pu in urine. The goal of this study was to evaluatethe bias, uncertainty and sensitivity of analytical techniques that measure3–56 µBq ²³⁹Pu in synthetic urine. The analytical techniquesstudied in this work included inductively coupled plasma mass spectrometry,thermal ionization mass spectrometry and fission track analysis. The resultsof the intercomparison demonstrated that all three techniques were capableof making the measurements, although not with equal degree of bias and uncertainty.The estimated minimum detectable activity was 1 µBq of ²³⁹Puper synthetic urine sample. This exercise is also the first effort to certifytest materials of plutonium in the nBq . g –1 range.     

A simple method of target preparation for the bulk analysis of powder samples by laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS)

A simple and rapid procedure using a glue technique has been developed for the preparation of stable targets from powder samples for bulk analysis by LA– ICP–MS. The procedure was evaluated for the analysis of trace elements in SiC, of rare-earth elements in different types of silicate (rocks, sediments, and soils), and of Au and platinum-group elements in geological silicates. The test analysis was conducted using an IR laser in combination with a quadrupole mass spectrometer. The recommended preparation procedure offers the possibility of different types of calibration, for example application of certified reference samples in combination with prepared spiked samples on a base of a natural or synthetic matrix, or addition calibration. The resulting calibration functions are linear over a range of several decades. The trueness of the results was evaluated by use of certified reference samples. Analytical concentration ranges, detection limits, and the relative standard deviations are reported. Received: 20 November 2000 / Revised: 13 March 2001 / Accepted: 17 March 2001     

Evaluation of gel electrophoresis techniques and laser ablation–inductively coupled plasma-mass spectrometry for screening analysis of Zn and Cu-binding proteins in plankton

The determination of metal-binding proteins in plankton is important because of their involvement in photosynthesis, which is fundamental to the biogeochemical cycle of the oceans and other ecosystems. We have elaborated a new strategy for screening of Cu and Zn-containing proteins in plankton on the basis of separation of proteins by use of Blue-Native PAGE (BN-PAGE), which entails use of a non-denaturing Tris–tricine system and detection of metals in the proteins by laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS). For comparison, denaturing PAGE based on Tris–glycine and Tris–tricine systems and Anodic-Native PAGE have also been investigated. A large number of protein bands with MW between 20 and 75 kDa were obtained by use of Tris–glycine PAGE but detection of metals by LA–ICP–MS was unsuccessful because of loss of metals from the proteins during the separation process. Different protein extraction, purification, and preconcentration methods were evaluated, focussing on both issues—achieving the best extraction and characterization of the proteins while maintaining the integrity of metal–protein binding in the plankton sample. Use of 25 mmol?L^?1 Tris–HCl and a protease inhibitor as extraction buffer with subsequent ultrafiltration and acetone precipitation was the most efficient means of sample preparation. Two Cu and Zn proteins were detected, a protein band corresponding to a MW of 60 kDa and another poorly resolved band with a MW between 15 and 35 kDa.     

Mobile phase selection for the combined use of liquid chromatography–inductively coupled plasma mass spectrometry and electrospray ionisation mass spectrometry

Four different organic solvents: dimethylformamide, 1,4-dioxane, n-propanol and ethanol were evaluated as alternative organic modifiers to acetonitrile for liquid chromatography (LC) separations. The aim was to establish common sets of chromatographic conditions that could be applied for LC hyphenation to inductively coupled plasma mass spectrometry (ICPMS) as well as to electrospray ionization MS (ESIMS). The approach was to evaluate candidate solvents that, compared to acetonitrile, potentially could give improved analytical performance (low solvent vapor loading, maximized analyte sensitivity and minimized carbon depositions on instrumental parts) in ICPMS analysis while retaining chromatographic and ESIMS performances. The study showed that dimethylformamide, 1,4-dioxane, n-propanol and ethanol all can be advantageous chromatographic modifiers for LC–ICPMS analysis, giving superior performance compared to acetonitrile. For the combined use of LC–ICPMS and LC–ESIMS with a common set of chromatographic conditions, n-propanol gave the best overall performance. The ¹⁹⁵Pt⁺ signal in ICPMS was continuously monitored during a 0–60% organic solvent gradient and at 25% of organic modifier, 100% of the signal obtained at the gradient start was preserved for n-propanol compared to only 35% of the signal when using acetonitrile. Platinum detection limits were 5–8 times lower using n-propanol compared with acetonitrile. Signal-to-noise ratio in continuous ESIMS signal measurements was 100, 90 and 110 for a 100 μg/ml solution of leucine–enkephaline using acetonitrile, ethanol and n-propanol, respectively. Chromatographic efficiency in reversed phase separations was preserved for n-propanol compared to acetonitrile for the analysis of the whole protein cytochrome C and the peptide bacitracin on a column with particle and pore sizes of 5 μm and 300 Å, but slightly deteriorated for the separation of the peptides leucine–enkephaline and bacitracin on a 3 μm and 90 Å column as the peak width at half height for both peptides increased by a factor of two. The performance on the smaller dimensioned column could however be improved by running the separations at 40 °C.     

Cerebral bioimaging of Cu, Fe, Zn, and Mn in the MPTP mouse model of Parkinson’s disease using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS)

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been established as a powerful technique for the determination of metal and nonmetal distributions within biological systems with high sensitivity. An imaging LA-ICP-MS technique for Fe, Cu, Zn, and Mn was developed to produce large series of quantitative element maps in native brain sections of mice subchronically intoxicated with 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridin (MPTP) as a model of Parkinson’s disease. Images were calibrated using matrix-matched laboratory standards. A software solution allowing a precise delineation of anatomical structures was implemented. Coronal brain sections were analyzed crossing the striatum and the substantia nigra, respectively. Animals sacrificed 2 h, 7 d, or 28 d after the last MPTP injection and controls were investigated.     

Accurate determination of naturally occurring radionuclides in Philippine coal-fired thermal power plants using inductively coupled plasma mass spectrometry and γ-spectroscopy

There is an increased interest in measuring naturally occurring radioactive materials (NORM) like coal, fly ash considering health hazards caused by naturally occurring radionuclides. This paper presents activity concentration (AC) of ²²⁶Ra, ²²⁸Ra, ²³²Th, ²³⁸U and ⁴⁰K in feed coal, bottom and fly ash samples from Philippines coal-fired thermal power plants using inductively coupled plasma mass spectrometry (ICP-MS) and high-purity germanium gamma spectroscopy (HPGe γ-spectroscopy). Coal, bottom and fly ash samples were digested using a microwave oven with a mixture of HNO₃, HClO₄ and HF. Uranium (²³⁸U) and thorium (²³²Th) ACs were also analyzed from samples using ICP-MS. A good correlation was found for the measurement of U and Th using both techniques (R² = 0.97 and 0.94 respectively). ICP-MS measurements showed the highest AC of ²³²Th and ²³⁸U in fly ash and lowest for feed coal samples. With HPGe γ-spectroscopy measurements, highest AC (in Bq kg^{− 1}) of ²²⁶Ra, ²²⁸Ra, ²²⁸Th and ⁴⁰K, were noticed in fly ash followed by bottom ash and feed coal. ICP-MS method is rapid for the measurement of uranium and thorium in comparison to γ-spectroscopy as secular equilibrium is not required. Activity concentrations of bottom and fly ash samples were found to be within the reported values worldwide and below the International Atomic Energy Agency recommended values for regulatory control.     

Characterization and quantification of metallothionein isoforms by capillary electrophoresis–inductively coupled plasma–isotope-dilution mass spectrometry

In a new approach to the characterization and quantification of metallothionein isoforms an on-line isotope-dilution method in combination with the coupling of capillary electrophoresis (CE) to an inductively coupled plasma-sector field mass spectrometer (ICP-SFMS) is reported. Metallothionein (MT) isoforms are separated by CE and the elements Cu, Zn, Cd, and S are detected simultaneously by use of ICP-SFMS in the medium resolution mode. On-line isotope dilution is performed by continuous introduction of an isotopically enriched, species-unspecific spike solution after the separation step. MT from rabbit liver and a further purified MT-1 isoform were quantified by determination of sulfur, and the stoichiometric compositions of the metalloprotein complexes are characterized by determination of their sulfur-to-metal ratios.     

Elemental fingerprint profile of beer samples constructed using 14 elements determined by inductively coupled plasma–mass spectrometry (ICP-MS): multivariation analysis and potential application to forensic sample comparison

Determination of elemental fingerprint profile of 40 commercial beer samples was performed using inductively coupled plasma–mass spectrometry combined with principal component analysis and receiver operating characteristic (ROC) analysis. Fourteen trace elements, ⁵¹V, ⁵²Cr, ⁵⁹Co, ⁶⁰Ni, ⁷⁵As, ⁸²Se, ⁹⁵Mo, ¹¹¹Cd, ¹¹⁵In, ¹²¹Sb, ¹³³Cs, ²⁰⁸Pb, ²⁰⁹Bi, and ²³⁸U, were monitored. All 40 beer samples are distinguishable by using the proposed method. ROC analysis showed that individual beer samples can be correctly identified via the magnitude of its correlation coefficient with respect to the other beers with low false positive rate. The obtained results suggested that the elemental fingerprint technique is feasible for sample differentiation and comparison.     

A systematic study on the influence of carbon on the behavior of hard-to-ionize elements in inductively coupled plasma–mass spectrometry

A systematic study on the influence of carbon on the signal of a large number of hard-to-ionize elements (i.e. B, Be, P, S, Zn, As, Se, Pd, Cd, Sb, I, Te, Os, Ir, Pt, Au, and Hg) in inductively coupled plasma–mass spectrometry has been carried out. To this end, carbon matrix effects have been evaluated considering different plasma parameters (i.e. nebulizer gas flow rate, r.f. power and sample uptake rate), sample introduction systems, concentration and type of carbon matrix (i.e. glycerol, citric acid, potassium citrate and ammonium carbonate) and type of mass spectrometer (i.e. quadrupole filter vs. double-focusing sector field mass spectrometer). Experimental results show that P, As, Se, Sb, Te, I, Au and Hg sensitivities are always higher for carbon-containing solutions than those obtained without carbon. The other hard-to-ionize elements (Be, B, S, Zn, Pd, Cd, Os, Ir and Pt) show no matrix effect, signal enhancement or signal suppression depending on the experimental conditions selected. The matrix effects caused by the presence of carbon are explained by changes in the plasma characteristics and the corresponding changes in ion distribution in the plasma (as reflected in the signal behavior plot, i.e. the signal intensity as a function of the nebulizer gas flow rate). However, the matrix effects for P, As, Se, Sb, Te, I, Au and Hg are also related to an increase in analyte ion population caused as a result of charge transfer reactions involving carbon-containing charged species in the plasma. The predominant specie is C⁺, but other species such as CO⁺, CO₂⁺, C₂⁺ and ArC⁺ could also play a role. Theoretical data suggest that B, Be, S, Pd, Cd, Os, Ir and Pt could also be involved in carbon based charge transfer reactions, but no experimental evidence substantiating this view has been found.