Polydiphenylamine-dodecyl sulfate films for the simultaneous amperometric determination of electroinactive anions and cations in ion-exclusion cation-exchange chromatography

An amperometric detector with two working electrodes both modified with polydiphenylamine-dodecyl sulfate (PDPA-DS) was successfully used for the simultaneous determination of electroinactive anions (SO42-, Cl-, NO3-) and cations (Na+, NH4+ and K+) in single-column ion-exclusion cation-exchange chromatography (IEC-CEC). The PDPA-DS chemical modified electrode (CME) was based on the incorporation of dodecyl sulfate (DS) into PDPA by electropolymerization of diphenylamine in the presence of sodium dodecyl sulfate. The electrochemical responses against the anions and cations at the PDPA-DS CME in differential pulse voltammetry were studied. A set of well-defined peaks of electroinactive anions and cations were obtained. The anions and cations were detected conveniently and reproducibly in a linear concentration range 0.01-5.0 mmol/L and their detection limits were in the range 5-9 micromol/L at a signal-to-noise ratio of 3 (S/N = 3). The proposed method was quick, sensitive and simple and was successfully applied to the analysis of lake water samples. The working electrode was stable over one week period of operation with no evidence of chemical and mechanical deterioration.     

Amperometric detection studies of Nafion/indium hexacyanoferrate film for the determination of electroinactive cations in ion chromatography

An amperometric detector based on the chemical modification of Nafion and indium (III) hexacyanoferrate (II, III) thin film (Nafion/In-CN-Fe) onto a glassy carbon (GC) electrode, was first successfully used for the determination of electroinactive cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) in single column ion chromatography (IC). A set of well-defined peaks of electroinactive cations was obtained. The detection limits of the cations are 8.9 × 10^–6 mol/L for Li⁺, 2.3 × 10^–6 mol/L for Na⁺, 5.2 × 10^–6 mol/L for K⁺, 4.8 × 10^–6 mol/L for Rb⁺, 4.0 ׶10^–6 mol/L for Cs⁺ and 5.3 × 10^–6 mol/L for NH₄ ⁺ at a single-to-noise ratio of 3. The proposed method was quick, sensitive and simple. The cations in rainwater and mineral water were successfully analyzed by this method.     

Application of Nafion／Cobalt Hexacyanoferrate Chemically Modified Electrodes for the Determination of Electroinactive Cations by Ion Chromatography

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｏｎｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＩＣ)ｈａｓｂｅｅｎｒｅｃｏｇｎｉｚｅｄａｓａｕｓｅｆｕｌｍｅｔｈｏｄｆｏｒｔｈｅｓｅｐａｒａｔｉｏｎｏｆｉｎｏｒｇａｎｉｃａｎｉｏｎｓａｎｄｃａｔｉｏｎｓｓｉｎｃｅｉｔｓｉｎｔｒｏｄｕｃｔｉｏｎｂｙＳｍａｌｌｅｔａｌ .ｉｎ 1975 .1ＡｓｉｇｎｉｆｉｃａｎｔｔｒｅｎｄｉｎｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆＩＣｍｅｔｈｏｄｉｓｓｅａｒｃｈｆｏｒｓｅｎｓｉｔｉｖｅａｎｄｕｎｉｖｅｒｓａｌｄｅｔｅｃｔｉｏｎｍｅｔｈｏｄｓ .Ｔｈｅｍａｉｎｄｅｔ…     

Conductivity monitoring of inorganic anions with a Cu(II)-containing poly(3-methylthiophene) electrode in single-column ion chromatography

An amperometric detector unit equipped with a Cu(II)-containing poly(3-methylthiophene) working electrode is described for the single-column ion chromatographic detection of electroinactive inorganic anions, such as F^?, Cl^?, Br^?, NO₂^? and NO₃^?. Chromatograms obtained with this unit and with a commercial conductivity detector are almost identical with regard to peak height. Thus, an amperometric unit employing this modified electrode can be used as a conductance monitor in ion chromatographic analysis. Although the responses of this electrode seem to be conductivity related, the detection principle is probably based on a dual mechanism involving equilibria between copper ions and various anions of the system in addition to simple conductivity changes associated with the passage of analyte plugs. This explains the difference in responses observed with platinum and stainless-steel electrodes used in the same cell configuration. The detector displays a linear range of at least two orders of magnitude on a logarithmic scale.     

Peak parking technique for the simultaneous determination of anions and cations

An ion chromatography method is described for the simultaneous determination of anions (Cl^–, NO₃^–, and SO₄^2–) and cations (Na⁺, NH₄⁺, K⁺, Mg²⁺, and Ca²⁺) using a single pump, a single eluent and a single detector. An anion-exchange column modified with chondroitin sulfate C facilitated the elution of the above three anions using 5 mM tartaric acid as the eluent in isocratic mode, whereas the same eluent facilitated the separation of the above five cations on a commercially-available cation-exchange column. The separation columns were connected in series via two six-port switching valves, so the required cation-exchange or anion-exchange separation could be carried out by selecting the appropriate positions for the switching valves. The separations were completed in 30 min.     

Simultaneous determination of oxalate, thiosulfate, and thiocyanate in urine by ion-exclusion chromatography with electrochemical detection

Summary A sensitive ion-exclusion chromatographic method has been developed for determination of oxalate, thiosulfate, and thiocyanate. The method is based on separation of these anions on a polymethacrylate-based, weakly acidic cation-exchange resin (TSKgel OApak-A) and detection by means of a glassy carbon (GC) electrode electrochemically modified with polyvinylpyridine (PVP), palladium, and iridium oxide (PVP/Pd/IrO₂). The electrochemical behavior of oxalate, thiosulfate, and thiocyanate at this chemically modified electrode (CME) have been investigated by cyclic voltammetry. The results indicated that electrocatalytic oxidation of these anions by the electrode was efficient and that the sensitivity, stability, and lifetime of the electrode were relatively high. Combined with ion-exclusion chromatography the PVP/Pd/IrO₂ electrode was used as the working electrode for amperometric detection of these anions. All linear ranges were over two orders of magnitude and detection limits, defined asS/N=3, were 9.0×10⁻⁷ mol L⁻¹ for oxalate, 6.7×10⁻⁷ mol L⁻¹ for thiosulfate, and 5.6×10⁻⁷ mol L⁻¹ for thiocyanate. Correlation coefficients were all>0.998. Coupled with microdialysis sampling the method has been successfully applied to the determination of oxalate, thiosulfate, and thiocyanate in urine.     

Sensitivity and Selectivity of Polypyrrole Based AC‐Amperometric Sensors for Electroinactive Ions – Frequency and Applied Potential Influence

Oxidation/reduction of polypyrrole films coupled with ion exchange on the polymer/solution interface can be utilized for amperometric sensing of electroinactive ions. Anion or cation exchanging films (polypyrrole doped by chloride or poly(4‐styrenesulfonate) ions, respectively) can be used to determine common anions (as Cl^?, NO , SO etc) or cations (K⁺, Na⁺, Li⁺, Ca²⁺, Mg²⁺) under conditions of alternating current (AC) amperometry in the range 10^?4–1 M. A sensitivity can be tuned by choosing appropriate electrode potential, corresponding to polypyrrole oxidation (anion‐exchanging films) or reduction (cation‐exchangers). Electrochemical impedance spectroscopy and AC‐voltammetry studies have shown that applied frequency and potential could also affect the observed dependence of the signal (admittance or AC‐current) on ion concentration. For high frequency the sensitivity is higher but selectivity lower, due to influence of solution conductivity on the response. For low frequencies the sensitivity is lower; however, a selectivity increase was observed due to diverse mobility of ions in the polymer film. Selectivity of AC‐amperometric responses was studied both in separate and mixed solutions.     

Electrochemical quartz crystal microbalance study for vanadium hexacyanoferrates: monitoring of film growth and ion effects during redox reactions

An electrochemical quartz crystal microbalance was employed to monitor directly the growth of vanadium hexacyanoferrate (VHF) films on platinum substrates during electrodeposition and interfacial coagulation in the solution containing sulfuric acid electrolyte, vanadium(IV) and hexacyanoferrate(III). Mass changes of the gold/crystal working electrode were correlated with cyclic voltammetry data. Effects of cations (NH₄⁺, Li⁺, Na⁺ and K⁺), anions (SO₄²⁻ and NO₃⁻) and solvent during redox reactions of the films were studied. The results show that cations were incorporated into the film during reduction and expelled from the film during oxidation. Solvent also participates in VHF electrochemistry, and its role cannot be neglected. Anions play no role in VHF electrochemistry.     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

On‐site sampling of inorganic contamination on the metal surface and analysis with capillary electrophoresis

Pipes are the primary structural elements used for transporting fluid in various industries. The most common damage mechanism is corrosion, which occurs in pipes surface of turbine. The corrosive compounds for pipes are inorganic ion (Na⁺, Cl^?, NH₄⁺, NO₃^?, etc.) and grinding oil. For rapid and quantitative detection of inorganic ions on site, more reliable and reproducible analytical methods are demanded. A highly efficient solid–liquid sampling collection system is introduced in this work. Papering on the sample surface, inorganic cations and anions were simultaneously collected and analyzed by capillary electrophoresis with indirect ultraviolet detection. As a result, five cations (Na⁺, K⁺, NH₄⁺, Ca²⁺, Mg²⁺) and three anions (Cl^?, NO₃^?, SO₄^2?) were completely separated. The efficiency of the sampling and ability of capillary electrophoresis analysis were presented by the determination of trace‐level (mg/m²) contaminants. The recoveries of cations and anions on the paper from metal surface were between 86.6 and 107.2%, and the relative standard deviations were less than 12.85%.     

Coadsorption of Tetraalkylammonium Cations and Halide Anions on the Uncharged Surface of Mercury Electrode

The data on coadsorption of tetraethylammonium (Et₄N⁺), tetrapropylammonium (Pr₄N⁺), and tetrabutylammonium (Bu₄N⁺) cations with Cl^–, Br^–, and I^– anions on an uncharged mercury electrode are compared with the models of coadsorption in a common monolayer and two parallel layers. The second model is shown to be in best agreement with experimental isotherms. However, the least discrepancy between calculations and experimental results is obtained when coadsorption of mentioned cations and anions is described by the Frumkin isotherm for neutral molecules with certain effective adsorption parameters.     

Theoretical study of interaction of 2,6-dithiopurine with Li+, Na+, K+, Be2+, Mg2+, and Ca2+ metal cations

The geometries of the complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with different possible 2,6-dithiopurine anions (DTP) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d, p) basis set. The interactions of the metal cations at different nucleophilic sites of various possible 2,6-dithiopurine anions were considered. It was revealed that metal cations would interact with 2,6-dithiopurine anions in a bicoordinate manner. In the gas phase, the most preferred position for the interaction of Li⁺, Na⁺, and K⁺ cations is between the N₃ and S₂ sites, while all divalent cations Be²⁺, Mg²⁺, and Ca²⁺ prefer binding between the N₇ and S₆ sites of the corresponding 2,6-dithiopurine. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi’s polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between 2,6-dithiopurine anions and the metal cations. It was revealed that aqueous solution would have significant effect on the relative stability of complexes obtained by the interaction of 2,6-dithiopurine anions with Mg²⁺ and Ca²⁺ cations. The effect of metal cations on different NH and CS stretching vibrational modes of 2,6-dithiopurine has also been discussed.     

The Application of Cryptand 22 as a Bifunctional Stationary Phase for Ion Chromatography

Poly (styrene/divinyl benzene) with cryptand 22 as an anchoring group was synthesized and applied as a bifunctional packing material for the separation of both cations and anions. At pH < 2, the resin can be protonated and applied as an anion exchanger for the separation of anions; with water as eluent, inorganic anions such as F^?, Cl^?, Br^?, NO₃^?”, I^? were well separated. After deprotonation at pH> 10, the resin became a cation exchanger and successfully separated alkali metal ions such as Li⁺, K⁺ and Cs⁺ with methanol as eluent. The effects of solvents, flow rate and temperature on the separation of various ions were also investigated.     

Electrostatic bonding models: A test on group 1 and 2 metal complexes with H2O,NH3, H2S,PH3, and related ligands

Electrostatic models frequently proposed to describe ion–molecule interactions have been tested on the adducts formed by Group 1 and 2 cations with H₂O, NH₃, H₂S, PH₃, their methyl analogs, and their anions. The results from the model calculations were compared with all-electron calculations (geometry optimized, MP2, TZP basis sets) carried out on adducts formed with Li⁺, Na⁺, K⁺, Ca²⁺, and Mg²⁺. The electrostatic potential model was utilized in two ways: The attraction of the point charge was calculated with and without relaxation of the ligand. A third model allowed relaxation of the ligand but treated the cation as a frozen core. The final model was the crude point charge/point dipole approximation. At long range, the models satisfactorily track the effects on energy of gross changes in the ion–ligand interaction (monovalent versus divalent ions, neutral ligands versus anions, parent ligands versus methyl derivatives), but correlation at close range is poor, especially for binding by divalent cations. The hypothesis that the calculated strength of cation–dipole binding is dependent on calculated dipole moment could not be verified. © 1995 by John Wiley & Sons, Inc.     

Eluent-Induced Separation of Inorganic Cations in Capillary Liquid Chromatography with Contactless Conductivity Detector

A non-suppressed contactless conductivity detector has been used as a capillary detector in a capillary ion chromatograph, combining a reversed-phase C30 column permanently modified with ionic surfactant. The C30 column (100 × 0.32 mm. id) was modified with sodium dodecyl sulfate (SDS) for the separation of inorganic cations. Monovalent cations could be separated by the proposed system, in which methanesulfonic acid (MSA) and SDS were employed as the mobile phase component, but divalent cations could not be eluted under this condition. As for the case of SDS used as the eluent, an H⁺-cation-exchange column was placed before the sample injector to convert the Na⁺ from the eluent into H⁺, and when the mixture of MSA and dodecyl sulfuric acid was used as the eluent, the retention of cations was improved and baseline separation of the cations was achieved within 23 min. The effect of the eluent composition on the retention behavior of inorganic cations was investigated. The repeatability of retention time and peak height varied from 0.39 to 0.58 and 2.21 to 3.25 % as relative standard deviation, respectively.

     

Characterization of [M–H] cations,radicals and anions of glycine in the gas phase: a combined experimental and ab initio study

The gas phase structures of the [M–H] cations and anions of glycine have been studied by using a combination of ab initio calculations (at the MP2(FC)/6–31+G1 level of theory) and tandem mass spectrometry (MS/MS). It was found that the ab initio stability order for the anions is [H₂NCH₂CO₂]⁻ > [H₂NCHCO₂H]⁻ > [HNCH₂CO₂H]⁻. In contrast, the cations exhibit different behaviour, whereas [H₂NCHCO₂H]⁺ is predicted to be a stable structure, [H₂NCH₂CO₂]⁺ spontaneously fragments to the ion–molecule complex [H₂NCH₂⁺ ⋯ (OCO)] and the singlet [HNCH₂CO₂H]⁺ isomer is predicted to undergo a skeletal rearrangement to form [CH₂NHCO₂H]⁺. MS/MS spectra of [M–H]⁺ cations of various glycine isotopomers were obtained via: (i) collisional activation of electron impact generated cations and (ii) charge reversal of anions formed via HO⁻ negative ion chemical ionization. The resulting spectra were significantly different, suggesting different structures were involved. Neutralization–reionization experiments were performed on [M–H]⁻ anions in order to gain insights into the structures of the intermediate radicals.     

10‐Methyl‐ and 9,10‐dimethyl­acridinium methyl sulfate

The title compounds, C₁₄H₁₂N⁺·CH₃O₄S^?, (I), and C₁₅H₁₄N⁺·CH₃O₄S^?, (II), respectively, crystallize with the planar 10‐methylacridinium or 9,10‐di­methyl­acridinium cations arranged in layers, parallel to the twofold axis in (I) and perpendicular to the 2₁ axis in (II). Adjacent cations in both compounds are packed in a `head‐to‐tail' manner. The methyl sulfate anion only exhibits planar symmetry in (II). The cations and anions are linked through C—H?O interactions involving three O atoms of the anion, six acridine H atoms and the CH₃ group on the N atom in (I), and the four O atoms of the anion, three acridine H atoms and the carbon‐bound CH₃ group in (II). The methyl sulfate anions are oriented differently in the two compounds relative to the cations, being nearly perpendicular in (I) but parallel in (II). Electrostatic interaction between the ions and the network of C—H?O interactions leads to relatively compact crystal lattices in both structures.     

Application of a single electrode,modified with polydiphenylamine and dodecyl sulfate,for the simultaneous amperometric determination of electro-inactive anions and cations in ion chromatography

An amperometric sensor with a single working electrode for simultaneous determination of electro-inactive anions and cations, e.g. SO4(2-), Cl(-), NO3(-), Na(+), NH4(+), K(+), Mg(2+) and Ca(2+), was designed as a detector in ion chromatography. The modification of its working golden electrode was based on the incorporation of dodecyl sulfate into polydiphenylamine by electropolymerization of diphenylamine in the presence of sodium dodecylsulfate. In ion-exclusion/cation-exchange chromatography, a set of well defined peaks of these anions and cations was obtained at the working potential, +1.35 V (vs. saturated calomel electrode) using a citric acid solution as eluent. The common anions and cations in mineral water samples were determined using this ion-chromatographic system with satisfactory results.     

Eluent-Induced Separation of Inorganic Cations in Capillary Liquid Chromatography with Contactless Conductivity Detector

A non-suppressed contactless conductivity detector has been used as a capillary detector in a capillary ion chromatograph, combining a reversed-phase C30 column permanently modified with ionic surfactant. The C30 column (100 × 0.32 mm. id) was modified with sodium dodecyl sulfate (SDS) for the separation of inorganic cations. Monovalent cations could be separated by the proposed system, in which methanesulfonic acid (MSA) and SDS were employed as the mobile phase component, but divalent cations could not be eluted under this condition. As for the case of SDS used as the eluent, an H⁺-cation-exchange column was placed before the sample injector to convert the Na⁺ from the eluent into H⁺, and when the mixture of MSA and dodecyl sulfuric acid was used as the eluent, the retention of cations was improved and baseline separation of the cations was achieved within 23 min. The effect of the eluent composition on the retention behavior of inorganic cations was investigated. The repeatability of retention time and peak height varied from 0.39 to 0.58 and 2.21 to 3.25 % as relative standard deviation, respectively.