Tandem imination/annulation of γ- and δ-ketoalkynes in the presence of ammonia/amines

In this account, we summarize the peculiar effects and advantages of gold, silver, and titanium dual role catalysis over the uncatalyzed tandem imination/annulation processes of γ- and δ-ketoalkynes.     

Spectrofluorimetric study and determination of desipramine in the presence of β-cyclodextrin

The native fluorescence intensity of desipramine was enhanced in the presence of β-cyclodextrin in aqueous solution. The inclusion complex formation between these compounds was studied by spectrofluorimetry. A stable complex with a 2: 1 stoichiometry of β-cyclodextrin to desipramine was formed (logβ₂ = 9.29 ± 0.01). In the presence of an optimum concentration of β-cyclodextrin, the fluorescence intensity was linearly proportional to desipramine concentration in the range of 0.1–100 μg/mL (7.2 × 10^?7?1.0 × 10^?4 M) with a limit of detection of 7 × 10^?8 M. The method was successfully applied to the detection of desipramine in its tablets.     

Long-term monitoring of PCDD/PCDF and other unintentionally produced POPs—Concepts and case studies from Europe

During the start-up and unstable combustion periods,even the state-of-the-art incinerators emit polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/PCDF) in stack gases at concentrations that are up to 1000 times higher than normal operation. Therefore,incinerators and other sources with variation of PCDD/PCDF release into air cannot be reliably monitored by the conventional short-term sampling that covers only 0.1%to 0.2%of the yearly operating time.A more comprehensive monitoring regime is required.T...     

Long-term monitoring of PCDD/PCDF and other unintentionally produced POPs — Concepts and case studies from Europe

During the start-up and unstable combustion periods, even the state-of-the-art incinerators emit polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) in stack gases at concentrations that are up to 1000 times higher than normal operation. Therefore, incinerators and other sources with variation of PCDD/PCDF release into air cannot be reliably monitored by the conventional short-term sampling that covers only 0.1% to 0.2% of the yearly operating time. A more comprehensive monitoring regime is required. This paper describes different applications of continuous PCDD/PCDF sampling in some European countries. The cases demonstrate that flexible regimes for continuous sampling can be crafted and applied by governments or regional/local authorities. Such regimes range from a countrywide, continuous requirement for selected facility types (e.g., waste incinerators) to a facility-specific regime that applies, for example, to new facilities for a defined time period until the facility has demonstrated continuous compliance with regulatory limits. Countries implementing the Stockholm Convention are suggested to evaluate in their Best available technology/Best environmental practice (BAT/BEP) activities the usefulness of long-term sampling by, for example, designating institutes related to the environmental ministry or regional authorities to supervise long-term sampling regimes at relevant facilities in their country/areas, beginning with priority sources (e.g., facilities used for destruction of persistent organic pollutants (POPs) or hazardous waste processing). This paper presents and discusses the results of the AMESA long-term monitoring system having demonstrated that in addition to PCDD/PCDF all other unintentionally produced POPs listed in the Stockholm Convention could be supervised.     

COS hydrolysis in the presence of oxygen： Experiment and modeling

A mathematical model of COS hydrolysis on Al2O3, with fouling of catalyst, has been developed. Kinetic studies were carried out in a fixed bed reactor under atmospheric pressure and low temperature （40-70℃）. The effects of the COS inlet concentration, temperature, and relative humidity were analyzed. Experimental results of breakthrough curves were used to obtain kinetic parameters, which accounted for effects of S deposition on the inner-face of the catalyst. The model described the experimental breakthrough curves satisfactorily and well explained the performance of COS hydrolysis in the presence of oxygen. The exothermic heat of adsorption and activation energy, assuming Arrhenius type of temperature dependence of the equilibrium constant, were determined. Activation energy of COS hydrolysis and H2S oxidation were 35.9 kJ/mol, 19.6 kJ/mol; adsorption heat of H2O and H2S on Al2O3 were 45.1 and 60.1 kJ/mol respectively. Deactivation coefficient （α） was used to quantify the behavior of COS hydrolysis at different operating conditions. The effect of relative humidity on α is significant in the relative humidity range under study. Experimental data accorded well with model data in the studied range.     

Investigation of the presence of KCl in the structure and morphology of V-amylose–inclusion complexes

Amylose–fatty acid inclusion complexes were prepared using amylose extracted from pea starch and fatty acids with different chain length. To form the complexes, amylose, dissolved in aqueous alkaline solution (0.1 Ν ΚΟΗ), was mixed with fatty acid potassium soap solution and after neutralization the complex was obtained as precipitate. To investigate the structure and morphology of V-amylose–inclusion complexes, a series of techniques such as X-ray diffraction, SEM-microscopy combined with elemental microanalysis, Differential scanning calorimetry and Fourier transform infrared spectroscopy were employed. XRD analysis of complexes, revealed that the complexes displayed the typical V-form pattern, with an extra peak at 2θ?=?28.2°. To identify the origin of that peak the complexes were examined by SEM microscopy combined with elemental microanalysis. The results indicated that the peak was due to the presence of potassium chloride, formed during the preparation of the complexes. Washing the complexes with water was sufficient to remove the salt.     

Unfolding and refolding details of lysozyme in the presence of β-casein micelles

In this work, we selected a small globular protein, lysozyme, to study how it unfolds and refolds in the presence of micelles composed of the unstructured β-casein proteins by using microcalorimetry and circular dichroism spectroscopy. It was found that a partially unfolded structure of lysozyme starts to form when the β-casein/lysozyme molar ratio is above 0.7, and the structure forms exclusively when the β-casein/lysozyme molar ratio is above 1.6. This partially unfolded state of lysozyme loses most of its tertiary structure and after heating, the denatured lysozyme molecules are trapped in the charged coatings of β-casein micelles and cannot refold upon cooling. The thus obtained protein complex can be viewed as a kind of special polyelectrolyte complex micelle. The net charge ratios of the two proteins and the ionic strength of the dispersions can significantly modulate the electrostatic and hydrophobic interactions between the two proteins. Our present work may have implications for the nanoparticle protein engineering therapy in the biomedicine field and may provide a better understanding of the principles governing the protein-protein interactions. Besides, the heating-cooling-reheating procedure employed in this work can also be used to study the unfolding and refolding details of the target protein in other protein-protein, protein-polymer and protein-small solute systems.     

MHD mixed convection in an inclined cavity containing adiabatic obstacle and filled with Cu–water nanofluid in the presence of the heat generation and partial slip

Journal of Thermal Analysis and Calorimetry - In the present paper, the performance of the graphene oxide in the solar steam generation has experimentally been examined. For this purpose, a setup...     

Zinc-metal promoted selective α-haloacylation and gem-bisacylation of alkyl aldehydes in the presence of chlorotrimethylsilane

Treatment of a mixture of alkyl aldehydes (1) with acid chlorides (2) in the presence of zinc metal powder and a catalytic amount of chlorotrimethylsilane (TMSCl) in dichloromethane brought about highly facile and effective coupling to give selectively the corresponding α-haloacylation and gem-bisacylation products, α-haloalkyl carboxylates and 1,1-dicarboxylates (acylals), in good to excellent yields.     

Novel and efficient supramolecular synthesis of pyrroles in the presence of β-cyclodextrin in water

A simple and efficient synthesis of highly substituted pyrroles was achieved in water medium via multi-component strategy, using amine,DMAD/DEAD as well as phenacyl bromide catalyzed by β-CD.Utilizing this protocol various pyrrole derivatives were synthesized in good to excellent yields.     

Hydrogenation of β-N-substituted enaminoesters in the presence of ruthenium catalysts

β-Aminoesters were prepared in two simple steps from β-ketoesters derivatives and primary amines under mild conditions. Their hydrogenation was performed at 50 °C in the presence of several organometallic catalysts under acidic conditions. The new β-N-substituted aminoesters were isolated in moderate to good yields.     

Hydrogenation of α-methylstyrene linear dimers in the presence of Pd- and Ni-containing catalysts

Hydrogenation of α-methylstyrene linear dimers and of 4-methyl-2,4-diphenylpentane on commercial Pd-containing and Ni (GM-3 grade) catalysts was studied under the following conditions: T = 75–190°C, P(H₂) = 0.2–0.8 MPa, G _c = 2.5–10 wt %, and τ = 1–4 h.     

An efficient synthesis of α-hydroxyphosphonates and α-aminophosphonates in the presence of chlorotrimethylsilane

Abstract

Solvent free, and quantitative yielding synthesis of α-hydroxyphosphonates (2a–h) from 2-chloroquinolin-3-carbaldehyde (1a–h) and α-aminophosphonates (4a–p) from imines (3a–p), obtained from 2-chloroquinoline-3-carbaldehyde by using triethylphosphite in the presence of chlorotrimethylsilane at room temperature in short time.     

Theoretical evaluation of the nature and strength of the F������F intermolecular interactions present in fluorinated hydrocarbons

The nature, strength and directionality of C?CF···F interactions were theoretically evaluated on all symmetry unique dimers present in the CF₄, C₂F₄ and C₆F₆ crystals and on CF₄, CHF₃, CH₂F₂ and CH₃F model dimers placed in two different geometries. On each dimer, the interaction energy was computed at the MP2/aug-cc-pVDZ level, and also an Atoms in Molecule analysis of the dimer electron density was done to find all intermolecular bonds. The characterization was completed by computing the energy components of the dimer interaction energy, using the SAPT method. The results show that in most dimers found in the CF₄, C₂F₄ and C₆F₆ crystals, there are more than one C?CF···F intermolecular bond and sometimes even a C?CF···?? intermolecular bond. By selecting dimers presenting one C?CF···F bond, the following strength can be estimated for a single C?CF···F bond: ?0.21?kcal/mol in C(sp³) atoms, ?0.25?kcal/mol in C(non-aromatic sp²), ?0.41?kcal/mol in C(aromatic sp²). The interaction energy of the dimer grows almost linearly with the number of C?CF···F bonds present. The relative orientation of the C?CF···F bond affects the bond strength. The SAPT calculations indicate that in collinear dimers, C?CF···F interactions are strongly dominated by the dispersion energetic component, while when in non-collinear conformations the electrostatic component can be as important as the dispersion one.     

Ab initio simulation of the sum-frequency generation response of optically active liquids in the presence of a dc electric field —determination of the absolute molecular configuration

Quantum chemical computations have been performed to evaluate the first and second hyperpolarizability quantities of the interference term, linear in the external static electric field, that appear in the electric field-induced sum-frequency generation signal of chiral liquids. These are performed at the time-dependent Hartree-Fock level on the prototypical 1,1′-bi-2-naphtol chiral species.     

Electrolytic hydride generation atomic absorption spectrometry for the determination of antimony, arsenic, selenium, and tin – mechanistic aspects and figures of merit

This article deals with the electrocatalytic and electrochemical mechanisms of hydride formation and their dependence on hydrogen overvoltage. A three-electrode-arrangement was used to determine the hydrogen overvoltage of different cathode materials (Pt, Au, Ag, glassy carbon, Cd, Pb, amalgamated Ag). The applicability of these cathode materials was tested for hydride formation using As(III), As(V), Sb(III), Sb(V), Se(IV), and Sn(IV). Glassy carbon is the most suitable cathode material for hydride generation with As(III), Sb(III), Se(IV), and Sn(IV). Hg–Ag is well suited for the production of stibine and arsine. As(III), As(V), Sb(III), and Sb(V) were all converted into their hydrides with efficiencies > 90%. A detection limit in the range of 0.11–0.13 μg L^–1 for As and Sb (sample volume 200 μL) was obtained for cathode materials with a high hydrogen overvoltage. The precision of replicate measurements was better than 5% calculated as variation coefficient. The accuracy of the presented method was verified by analysis of certified reference materials and tissues of cancer patients. The recovery rates for As and Se were calculated to be 93–108%.     

Thermodynamic stability and retinol binding property of β-lactoglobulin in the presence of cationic surfactants

In this work the stability parameters of bovine β-lactoglobulin, variant A (BLG-A), with regard to their transition curves induced by dodecyltrimethylammonium bromide (C₁₂TAB), tetradecyltrimethylammonium bromide (C₁₄TAB) and hexadecyltrimethylammonium bromide (C₁₆TAB) as cationic surfactants, were determined at 298 K. For each transition curve, the conventional method of analysis which assumes a linear concentration dependence of the pre- and post-transition base lines, gave the most realistic values for ΔG_D(H₂O). The results represent the increase in the denaturating power of surfactants with an increase in hydrocarbon chain length. The value of about 22.27 kJ · mol^?1 was obtained for ΔG_D(H₂O) from transition curves. Subsequently, the retinol binding property of BLG as its functional indicator was investigated in the presence of these surfactants using the spectrofluorimeter titration method. The results represent the substantial enhancement of retinol binding affinity of BLG in the presence of these surfactants.     

Spontaneous and diastereoselective aldol reactions of cyclic β-amino ketones in the presence of water

Direct aldol reactions of 4-methyl-1-piperidone, tropinone and granatanone (pseudopelletierine) take place spontaneously in the presence of water without any catalyst or additional reagents. The anti/syn-diastereoselectivity of the aqueous aldol reaction depends on the amount of water used. The syn-selectivity of the reaction is probably due to the thermodynamic control. Excellent atom economy and low E factors together with anti-selectivity as high as 98:2 for the tropinone aldol were obtained.     

Cyclization and halogenation of substituted o-allylphenols with diacetoxyiodobenzene in the presence of iodine or bromine

Substituted 2-halomethyl-2,3-dihydrobenzofurans were synthesized in one pot and in mild yield from substituted o-allylphenols with diacetoxyiodobenzene in the presence of 12 or Br2 in dry CH2Cl2 under reflux.